summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)AuthorFilesLines
2022-04-08clocksource: acpi_pm: fix return value of __setup handlerRandy Dunlap1-2/+4
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08clocksource/drivers/timer-of: Check return value of of_iomap in ↵Guillaume Ranquet1-3/+3
timer_of_base_init() [ Upstream commit 4467b8bad2401794fb89a0268c8c8257180bf60f ] of_base->base can either be iomapped using of_io_request_and_map() or of_iomap() depending whether or not an of_base->name has been set. Thus check of_base->base against NULL as of_iomap() does not return a PTR_ERR() in case of error. Fixes: 9aea417afa6b ("clocksource/drivers/timer-of: Don't request the resource by name") Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08clocksource/drivers/timer-microchip-pit64b: Use notraceClaudiu Beznea1-1/+1
[ Upstream commit ff10ee97cb203262e88d9c8bc87369cbd4004a0c ] Use notrace for mchp_pit64b_sched_read_clk() to avoid recursive call of prepare_ftrace_return() when issuing: echo function_graph > /sys/kernel/debug/tracing/current_tracer Fixes: 625022a5f160 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220304133601.2404086-3-claudiu.beznea@microchip.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08clocksource/drivers/exynos_mct: Handle DTS with higher number of interruptsKrzysztof Kozlowski1-1/+9
[ Upstream commit ab8da93dc06d82f464c47ab30e6c75190702f369 ] The driver statically defines maximum number of interrupts it can handle, however it does not respect that limit when configuring them. When provided with a DTS with more interrupts than assumed, the driver will overwrite static array mct_irqs leading to silent memory corruption. Validate the interrupts coming from DTS to avoid this. This does not change the fact that such DTS might not boot at all, because it is simply incompatible, however at least some warning will be printed. Fixes: 36ba5d527e95 ("ARM: EXYNOS: add device tree support for MCT controller driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08clocksource/drivers/exynos_mct: Refactor resources allocationMarek Szyprowski1-20/+30
[ Upstream commit 7cd925a8823d16de5614d3f0aabea9948747accd ] Move interrupts allocation from exynos4_timer_resources() into separate function together with the interrupt number parsing code from mct_init_dt(), so the code for managing interrupts is kept together. While touching exynos4_timer_resources() function, move of_iomap() to it. No functional changes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211101193531.15078-2-semen.protsenko@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08clocksource/drivers/timer-ti-dm: Fix regression from errata i940 fixDrew Fustini1-2/+2
[ Upstream commit bceaae3bac0ce27c549bb050336d8d08abc2ee54 ] The existing fix for errata i940 causes a conflict for IPU2 which is using timer 3 and 4. From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi: &ipu2 { mboxes = <&mailbox6 &mbox_ipu2_ipc3x>; ti,timers = <&timer3>; ti,watchdog-timers = <&timer4>, <&timer9>; }; The conflict was noticed when booting mainline on the BeagleBoard X15 which has a TI AM5728 SoC: remoteproc remoteproc1: 55020000.ipu is available remoteproc remoteproc1: powering up 55020000.ipu remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4 omap-rproc 55020000.ipu: could not get timer platform device omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19 remoteproc remoteproc1: can't start rproc 55020000.ipu: -19 This change modifies the errata fix to instead use timer 15 and 16 which resolves the timer conflict. It does not appear to introduce any latency regression. Results from cyclictest with original errata fix using dmtimer 3 and 4: # cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0 policy: fifo: loadavg: 0.02 0.03 0.05 T: 0 ( 1449) P:80 I:200 C: 800368 Min: 0 Act: 32 Avg: 22 Max: 128 T: 1 ( 1450) P:80 I:200 C: 800301 Min: 0 Act: 12 Avg: 23 Max: 70 The results after the change to dmtimer 15 and 16: # cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0 policy: fifo: loadavg: 0.36 0.19 0.07 T: 0 ( 1711) P:80 I:200 C: 759599 Min: 0 Act: 6 Avg: 22 Max: 108 T: 1 ( 1712) P:80 I:200 C: 759539 Min: 0 Act: 19 Avg: 23 Max: 79 Fixes: 25de4ce5ed02 ("clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940") Link: https://lore.kernel.org/linux-omap/YfWsG0p6to3IJuvE@x1/ Suggested-by: Suman Anna <s-anna@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20220204053503.1409162-1-dfustini@baylibre.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ARM: dts: Use 32KiHz oscillator on devkit8000Anthoine Bourgeois1-2/+1
[ Upstream commit 8840f5460a23759403f1f2860429dcbcc2f04a65 ] Devkit8000 board seems to always used 32k_counter as clocksource. Restore this behavior. If clocksource is back to 32k_counter, timer12 is now the clockevent source (as before) and timer2 is not longer needed here. This commit fixes the same issue observed with commit 23885389dbbb ("ARM: dts: Fix timer regression for beagleboard revision c") when sleep is blocked until hitting keys over serial console. Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16ARM: dts: Fix timer regression for beagleboard revision cTony Lindgren1-1/+1
[ Upstream commit 23885389dbbbbc698986e77a45c1fc44a6e3632e ] Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3") caused a timer regression for beagleboard revision c where the system clockevent stops working if omap3isp module is unloaded. Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks applied that limit the usable timers for no good reason. This also affects the power management as we use the system clock instead of the 32k clock source. Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer quirks. This allows us to remove the timer quirks for later beagleboard revisions. We also need to update the related timer quirk check for the correct compatible property. Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3") Cc: linux-kernel@vger.kernel.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14clocksource/drivers/dw_apb_timer_of: Fix probe failureAlexey Sheplyakov1-1/+1
commit a663bd19114d79f0902e2490fc484e5a7419cdc2 upstream. The driver refuses to probe with -EINVAL since the commit 5d9814df0aec ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available"). Before the driver used to probe successfully if either "clock-freq" or "clock-frequency" properties has been specified in the device tree. That commit changed if (A && B) panic("No clock nor clock-frequency property"); into if (!A && !B) return 0; That's a bug: the reverse of `A && B` is '!A || !B', not '!A && !B' Signed-off-by: Vadim V. Vlasov <vadim.vlasov@elpitech.ru> Signed-off-by: Alexey Sheplyakov <asheplyakov@basealt.ru> Fixes: 5d9814df0aec56a6 ("clocksource/drivers/dw_apb_timer_of: Add error handling if no clock available"). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vadim V. Vlasov <vadim.vlasov@elpitech.ru> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20211109153401.157491-1-asheplyakov@basealt.ru Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18clocksource/drivers/timer-ti-dm: Select TIMER_OFKees Cook1-0/+1
[ Upstream commit eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ] When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select CONFIG_TIMER_OF when enaling OMAP_DM_TIMER: arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table' Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/ Cc: Tony Lindgren <tony@atomide.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: linux-omap@vger.kernel.org Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03Merge tag 'mips_5.15' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - converted Pistachio platform to use MIPS generic kernel - fixes and cleanups * tag 'mips_5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: Malta: fix alignment of the devicetree buffer MIPS: ingenic: Unconditionally enable clock of CPU #0 MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports MIPS: mscc: ocelot: disable all switch ports by default MAINTAINERS: adjust PISTACHIO SOC SUPPORT after its retirement MIPS: Return true/false (not 1/0) from bool functions MIPS: generic: Return true/false (not 1/0) from bool functions MIPS: Make a alias for pistachio_defconfig MIPS: Retire MACH_PISTACHIO MIPS: config: generic: Add config for Marduk board pinctrl: pistachio: Make it as an option phy: pistachio-usb: Depend on MIPS || COMPILE_TEST clocksource/drivers/pistachio: Make it selectable for MIPS clk: pistachio: Make it selectable for generic MIPS kernel MIPS: DTS: Pistachio add missing cpc and cdmm MIPS: generic: Allow generating FIT image for Marduk board MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive MIPS: loongson2ef: don't build serial.o unconditionally MIPS: Replace deprecated CPU-hotplug functions. MIPS: Alchemy: Fix spelling contraction "cant" -> "can't" ...
2021-09-02Merge tag 'hyperv-next-signed-20210831' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - make Hyper-V code arch-agnostic (Michael Kelley) - fix sched_clock behaviour on Hyper-V (Ani Sinha) - fix a fault when Linux runs as the root partition on MSHV (Praveen Kumar) - fix VSS driver (Vitaly Kuznetsov) - cleanup (Sonia Sharma) * tag 'hyperv-next-signed-20210831' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv_utils: Set the maximum packet size for VSS driver to the length of the receive buffer Drivers: hv: Enable Hyper-V code to be built on ARM64 arm64: efi: Export screen_info arm64: hyperv: Initialize hypervisor on boot arm64: hyperv: Add panic handler arm64: hyperv: Add Hyper-V hypercall and register access utilities x86/hyperv: fix root partition faults when writing to VP assist page MSR hv: hyperv.h: Remove unused inline functions drivers: hv: Decouple Hyper-V clock/timer code from VMbus drivers x86/hyperv: add comment describing TSC_INVARIANT_CONTROL MSR setting bit 0 Drivers: hv: Move Hyper-V misc functionality to arch-neutral code Drivers: hv: Add arch independent default functions for some Hyper-V handlers Drivers: hv: Make portions of Hyper-V init code be arch neutral x86/hyperv: fix for unwanted manipulation of sched_clock when TSC marked unstable asm-generic/hyperv: Add missing #include of nmi.h
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds1-12/+36
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-08-14clocksource/drivers/fttmr010: Pass around less pointersLinus Walleij1-16/+16
Just pass bool flags from the different initcalls and use the flags to set the right pointers. This results in less pointers passed around in init. Cc: Cédric Le Goater <clg@kaod.org> Cc: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210724224424.2085404-1-linus.walleij@linaro.org
2021-08-14clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdownFengquan Chen1-2/+6
mtk_syst_clkevt_shutdown is called after irq disabled in suspend flow, clear any pending systimer irq when shutdown to avoid suspend aborted due to timer irq pending Also as for systimer in mediatek socs, there must be firstly enable timer before clear systimer irq Fixes: e3af677607d9("clocksource/drivers/timer-mediatek: Add support for system timer") Signed-off-by: Fengquan Chen <fengquan.chen@mediatek.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1617960162-1988-2-git-send-email-Fengquan.Chen@mediatek.com
2021-08-14clocksource/drivers/ingenic: Use bitfield macro helpers周琰杰 (Zhou Yanjie)1-6/+7
Use "FIELD_GET()" and "FIELD_PREP()" to simplify the code. [dlezcano] : Changed title Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1627638188-116163-1-git-send-email-zhouyanjie@wanyeetech.com
2021-08-13clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock ↵Phong Hoang1-12/+18
source channel If CMT instance has at least two channels, one channel will be used as a clock source and another one used as a clock event device. In that case, IRQ is not requested for clock source channel so sh_cmt_clock_event_program_verify() might work incorrectly. Besides, when a channel is only used for clock source, don't need to re-set the next match_value since it should be maximum timeout as it still is. On the other hand, due to no IRQ, total_cycles is not counted up when reaches compare match time (timer counter resets to zero), so sh_cmt_clocksource_read() returns unexpected value. Therefore, use 64-bit clocksoure's mask for 32-bit or 16-bit variants will also lead to wrong delta calculation. Hence, this mask should correspond to timer counter width, and above function just returns the raw value of timer counter register. Fixes: bfa76bb12f23 ("clocksource: sh_cmt: Request IRQ for clock event device only") Fixes: 37e7742c55ba ("clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines") Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422123443.73334-1-niklas.soderlund+renesas@ragnatech.se
2021-08-13clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPUWill Deacon1-1/+2
The "mct_tick" is a per-cpu clockevents device. Set the CLOCK_EVT_FEAT_PERCPU feature to prevent e.g. mct_tick0 being unsafely designated as the global broadcast timer and instead treat the device as a per-cpu wakeup timer. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Will Deacon <will@kernel.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210608154341.10794-3-will@kernel.org
2021-08-13clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64Will Deacon1-2/+11
All arm64 CPUs feature an architected timer, which offers a relatively low-latency interface to a per-cpu clocksource and timer. For the most part, using this interface is a no-brainer, with the exception of SoCs where it cannot be used to wake up from deep idle state (i.e. CLOCK_EVT_FEAT_C3STOP is set). On the contrary, the Exynos MCT is extremely slow to access yet can be used as a wakeup source. In preparation for using the Exynos MCT as a potential wakeup timer for the Arm architected timer, reduce its ratings so that the architected timer is preferred. This effectively reverts the decision made in 6282edb72bed ("clocksource/drivers/exynos_mct: Increase priority over ARM arch timer") for arm64, as the reasoning for the original change was to work around a 32-bit SoC design. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Will Deacon <will@kernel.org> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> # exynos-5422 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210608154341.10794-2-will@kernel.org
2021-08-12clocksource/drivers/pistachio: Make it selectable for MIPSJiaxun Yang1-1/+2
So it will be avilable for generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-08-04watchdog: ixp4xx: Rewrite driver to use coreLinus Walleij1-12/+36
This rewrites the IXP4xx watchdog driver as follows: - Spawn the watchdog driver as a platform device from the timer driver. It's one device in the hardware, and the fact that Linux splits the handling into two different devices is a Linux pecularity, and thus it becomes a Linux pecularity to spawn a separate watchdog driver. - Spawn the watchdog driver from the timer driver at probe(). This is well after the timer driver as actually registered and started and we know the register base is available. - Instead of looping back callbacks to the timer drivers for all watchdog calls, pass the register base to the watchdog driver and manage the registers there. The two drivers aren't even interested in the same register so the spinlock is totally surplus, delete it. - Replace pretty much all of the content in the watchdog driver with a simple, modern watchdog driver utilizing the watchdog core instead of registering its own misc device and ioctl() handling. - Drop module parameters as the same already exist in the watchdog core. What remains is a slim elegant (IMO) watchdog driver using the watchdog core, spawning from device tree or boardfile alike. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-19drivers: hv: Decouple Hyper-V clock/timer code from VMbus driversMichael Kelley1-3/+0
Hyper-V clock/timer code in hyperv_timer.c is mostly independent from other VMbus drivers, but building for ARM64 without hyperv_timer.c shows some remaining entanglements. A default implementation of hv_read_reference_counter can just read a Hyper-V synthetic register and be independent of hyperv_timer.c, so move this code out and into hv_common.c. Then it can be used by the timesync driver even if hyperv_timer.c isn't built on a particular architecture. If hyperv_timer.c *is* built, it can override with a faster implementation. Also provide stubs for stimer functions called by the VMbus driver when hyperv_timer.c isn't built. No functional changes. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1626220906-22629-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-07-01Merge tag 'clk-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This round has a diffstat dominated by Qualcomm clk drivers. Honestly though that's just a bunch of data so the diffstat reflects that. Looking beyond that there's just a bunch of updates all around in various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall the driver changes look to be mostly enabling more clks and non-critical fixes that we could hold until the next merge window. I'm especially excited about the series from Arnd that graduates clkdev to be the only implementation of clk_get() and clk_put(). That's a good step in the right direction to migreate eveerything over to the common clk framework. Now we don't have to worry about clkdev specific details, they're just part of the clk API now. Core: - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in only one place in the kernel instead of in drivers/clk/clkdev.c and in architectures that want their own implementation New Drivers: - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Qualcomm MDM9607 GCC - Qualcomm SC8180X display clks - Qualcomm SM6125 GCC - Qualcomm SM8250 CAMCC (camera) - Renesas RZ/G2L SoC - Hisilicon hi3559A SoC Updates: - Stop using clock-output-names in ST clk drivers (yay!) - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC - duty cycle setting support on qcom clks - Add TI am33xx spread spectrum clock support - Use determine_rate() for the Amlogic pll ops instead of round_rate() - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1 - Improve Amlogic axg-audio controller error on deferral - Add NNA clocks on Amlogic g12a - Reduce memory footprint of Rockchip PLL rate tables - A fix for the newly added Rockchip rk3568 clk driver - Exported clock for the newly added Rockchip video decoder - Remove audio ipg clock from i.MX8MP - Remove deprecated legacy clock binding for i.MX SCU clock driver - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio, parallel interface) - Add dedicated clock ops for i.MX paralel interface - Different fixes for clocks controlled by ATF on i.MX SoCs - Add A53/A72 frequency scaling support i.MX clk-scu driver - Add special case for DCSS clock on suspend for i.MX clk-scu driver - Add parent save/restore on suspend/resume to i.MX clk-scu driver - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their bindings - Tegra clk driver no longer deasserts resets on clk_enable as it gets in the way of certain power-up sequences - Fix compile testing for Tegra clk driver - One patch to fix a divider on the Allwinner v3s Audio PLL - Add support for CPU core clock boost modes on Renesas R-Car Gen3 - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and improve support for multiple parents - Switch Renesas RZ/N1 divider clocks to .determine_rate() - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3 - Convert ar7 to common clk framework - Convert ralink to common clk framework" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits) clk: zynqmp: Handle divider specific read only flag clk: zynqmp: Use firmware specific mux clock flags clk: zynqmp: Use firmware specific divider clock flags clk: zynqmp: Use firmware specific common clock flags clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: hisilicon: Add clock driver for hi3559A SoC dt-bindings: Document the hi3559a clock bindings clk: si5341: Add sysfs properties to allow checking/resetting device faults clk: si5341: Add silabs,iovdd-33 property clk: si5341: Add silabs,xaxb-ext-clk property clk: si5341: Allow different output VDD_SEL values clk: si5341: Update initialization magic clk: si5341: Check for input clock presence and PLL lock on startup ...
2021-06-16clocksource/drivers/timer-ti-dm: Drop unnecessary restoreTony Lindgren1-1/+2
The device is not losing context on CPU_CLUSTER_PM_ERROR. As we are only saving and restoring context with cpu_pm, there is no need to restore the context in case of an error. Note that the unnecessary restoring of context does not cause issues, it's just not needed. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210518075306.35532-1-tony@atomide.com
2021-06-16clocksource/arm_arch_timer: Improve Allwinner A64 timer workaroundSamuel Holland1-1/+1
Bad counter reads are experienced sometimes when bit 10 or greater rolls over. Originally, testing showed that at least 10 lower bits would be set to the same value during these bad reads. However, some users still reported time skips. Wider testing revealed that on some chips, occasionally only the lowest 9 bits would read as the anomalous value. During these reads (which still happen only when bit 10), bit 9 would read as the correct value. Reduce the mask by one bit to cover these cases as well. Cc: stable@vger.kernel.org Fixes: c950ca8c35ee ("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability") Reported-by: Roman Stratiienko <r.stratiienko@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210515021439.55316-1-samuel@sholland.org
2021-06-16clocksource/drivers/arm_global_timer: Remove duplicated argument in ↵Wan Jiabing1-1/+1
arm_global_timer Fix the following coccicheck warning: drivers/clocksource/arm_global_timer.c:107:4-23: duplicated argument to & or | Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210615115440.8881-1-wanjiabing@vivo.com
2021-06-16clocksource/drivers/arm_global_timer: Make symbol 'gt_clk_rate_change_nb' staticZou Wei1-1/+1
The sparse tool complains as follows: drivers/clocksource/arm_global_timer.c:54:23: warning: symbol 'gt_clk_rate_change_nb' was not declared. Should it be static? This symbol is not used outside of arm_global_timer.c, so mark it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1623490046-37972-1-git-send-email-zou_wei@huawei.com
2021-06-16arm: zynq: don't disable CONFIG_ARM_GLOBAL_TIMER due to CONFIG_CPU_FREQ anymoreAndrea Merello1-0/+1
Now ARM global timer driver could work even if it's source clock rate changes, so we don't need to disable that driver when cpu frequency scaling is in use. This cause Zynq arch to get support for timer delay and get_cycles(). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-3-andrea.merello@gmail.com
2021-06-16clocksource/drivers/arm_global_timer: Implement rate compensation whenever ↵Andrea Merello2-10/+125
source clock changes This patch adds rate change notification support for the parent clock; should that clock change, then we try to adjust the our prescaler in order to compensate (i.e. we adjust to still get the same timer frequency). This is loosely based on what it's done in timer-cadence-ttc. timer-sun51, mips-gic-timer and smp_twd.c also seem to look at their parent clock rate and to perform some kind of adjustment whenever needed. In this particular case we have only one single counter and prescaler for all clocksource, clockevent and timer_delay, and we just update it for all (i.e. we don't let it go and call clockevents_update_freq() to notify to the kernel that our rate has changed). Note that, there is apparently no other way to fixup things, because once we call register_current_timer_delay(), specifying the timer rate, it seems that that rate is not supposed to change ever. In order for this mechanism to work, we have to make assumptions about how much the initial clock is supposed to eventually decrease from the initial one, and set our initial prescaler to a value that we can eventually decrease enough to compensate. We provide an option in KConfig for this. In case we end up in a situation in which we are not able to compensate the parent clock change, we fail returning NOTIFY_BAD. This fixes a real-world problem with Zynq arch not being able to use this driver and CPU_FREQ at the same time (because ARM global timer is fed by the CPU clock, which may keep changing when CPU_FREQ is enabled). Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406130045.15491-2-andrea.merello@gmail.com
2021-06-15clocksource/drivers/ingenic: Rename unreasonable array names周琰杰 (Zhou Yanjie)1-5/+5
1.Rename the "ingenic_ost_clk_info[]" to "x1000_ost_clk_info[]" to facilitate the addition of OST support for X2000 SoC in a later commit 2.When the OST support for X2000 SoC is added, there will be two compatible strings, so renaming "ingenic_ost_of_match[]" to "ingenic_ost_of_matches[]" is more reasonable 3.Remove the unnecessary comma in "ingenic_ost_of_matches[]" to reduce code size as much as possible. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1622824306-30987-2-git-send-email-zhouyanjie@wanyeetech.com
2021-06-15clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFGTony Lindgren1-0/+6
As we are using cpu_pm to save and restore context, we must also save and restore the timer sysconfig register TIOCP_CFG. This is needed because we are not calling PM runtime functions at all with cpu_pm. Fixes: b34677b0999a ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore") Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Adam Ford <aford173@gmail.com> Cc: Andreas Kemnade <andreas@kemnade.info> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
2021-06-15clocksource/drivers/mediatek: Ack and disable interrupts on suspendEvan Benn1-0/+24
Interrupts are disabled during suspend before this driver disables its timers. ARM trusted firmware will abort suspend if the timer irq is pending, so ack and disable the timer interrupt during suspend. Signed-off-by: Evan Benn <evanbenn@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210512122528.v4.1.I1d9917047de06715da16e1620759f703fcfdcbcb@changeid
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann1-3/+3
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-04clocksource/drivers/samsung_pwm: Constify source IO memoryKrzysztof Kozlowski1-1/+1
The 'source_reg' IO memory is only read, so the pointer can point to const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-4-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Cleanup on init errorKrzysztof Kozlowski1-3/+17
Failure of timer initialization is likely to be fatal for the system, so cleanup in such case is not strictly necessary. However the code might be refactored or reused, so better not to rely on such assumption that system won't continue init failure. Unmap the IO memory and put the clock on initialization failures from devicetree. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-3-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Constify passed structureKrzysztof Kozlowski1-1/+1
The 'struct samsung_pwm_variant' argument passed to initialization functions is not modified, so it can be made const for safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-2-krzysztof.kozlowski@canonical.com
2021-06-04clocksource/drivers/samsung_pwm: Minor whitespace cleanupKrzysztof Kozlowski1-8/+11
Cleanup the code to be slightly more readable and follow coding convention - only whitespace. This fixes checkpatch warnings: WARNING: Block comments should align the * on each line WARNING: please, no space before tabs WARNING: Missing a blank line after declarations CHECK: Alignment should match open parenthesis Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506202729.157260-1-krzysztof.kozlowski@canonical.com
2021-06-03clocksource/drivers/arm_arch_timer: Remove arch_timer_rate1Jisheng Zhang1-1/+0
This variable is added by my mistake, it's not used at all. Fixes: e2bf384d4329 ("clocksource/drivers/arm_arch_timer: Add __ro_after_init and __init") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210511154856.6afbcb65@xhacker.debian
2021-05-14clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86Vitaly Kuznetsov1-2/+2
Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029) the commit e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") broke vDSO on x86. The problem appears to be that VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and '#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not a define). Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead. Fixes: e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") Reported-by: Mohammed Gamal <mgamal@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+36
Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds1-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-26Merge tag 'hyperv-next-signed-20210426' of ↵Linus Torvalds1-78/+171
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus enhancement - Free page reporting support for Hyper-V balloon driver - Some patches for running Linux as Arm64 Hyper-V guest - A few misc clean-up patches * tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (30 commits) drivers: hv: Create a consistent pattern for checking Hyper-V hypercall status x86/hyperv: Move hv_do_rep_hypercall to asm-generic video: hyperv_fb: Add ratelimit on error message Drivers: hv: vmbus: Increase wait time for VMbus unload Drivers: hv: vmbus: Initialize unload_event statically Drivers: hv: vmbus: Check for pending channel interrupts before taking a CPU offline Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE Drivers: hv: vmbus: Introduce and negotiate VMBus protocol version 5.3 Drivers: hv: vmbus: Use after free in __vmbus_open() Drivers: hv: vmbus: remove unused function Drivers: hv: vmbus: Remove unused linux/version.h header x86/hyperv: remove unused linux/version.h header x86/Hyper-V: Support for free page reporting x86/hyperv: Fix unused variable 'hi' warning in hv_apic_read x86/hyperv: Fix unused variable 'msr_val' warning in hv_qlock_wait hv: hyperv.h: a few mundane typo fixes drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue Drivers: hv: vmbus: Drop error message when 'No request id available' asm-generic/hyperv: Add missing function prototypes per -W1 warnings clocksource/drivers/hyper-v: Move handling of STIMER0 interrupts ...
2021-04-08clocksource/drivers/arm_arch_timer: Add __ro_after_init and __initJisheng Zhang1-11/+12
Some functions are not needed after booting, so mark them as __init to move them to the .init section. Some global variables are never modified after init, so can be __ro_after_init. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210330140444.4fb2a7cb@xhacker.debian
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren1-0/+76
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issueTony Lindgren1-23/+43
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm timers instead. Let's prepare for adding support for percpu timers by adding a common dmtimer_clkevt_init_common() and call it from dmtimer_clockevent_init(). This patch makes no intentional functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-2-tony@atomide.com
2021-04-08clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leakDinh Nguyen1-5/+21
Add calls to disable the clock and unmap the timer base address in case of any failures. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210322121844.2271041-1-dinguyen@kernel.org
2021-04-08clocksource/drivers/npcm: Add support for WPCM450Jonathan Neuschäfer1-0/+1
Add a compatible string for WPCM450, which has essentially the same timer controller. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210320181610.680870-11-j.neuschaefer@gmx.net
2021-04-08clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3Wolfram Sang1-2/+3
CMTOUT_IE is only supported for older SoCs. Newer SoCs shall not set this bit. So, add a version check. Reported-by: Phong Hoang <phong.hoang.wz@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210309094448.31823-1-wsa+renesas@sang-engineering.com
2021-04-08clocksource/drivers/pistachio: Fix trivial typoDrew Fustini1-2/+2
Fix trivial typo, rename local variable from 'overflw' to 'overflow' in pistachio_clocksource_read_cycles(). Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305090315.384547-1-drew@beagleboard.org
2021-04-08clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()Wei Yongjun1-2/+2
In case of error, the function device_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308123031.2285083-1-weiyongjun1@huawei.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-11 19:07:28 +0300