summaryrefslogtreecommitdiff
path: root/drivers/dma-buf
AgeCommit message (Collapse)AuthorFilesLines
2016-10-12Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-72/+176
Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
2016-09-22dma-buf/sync_file: free fences array in num_fences is 1Gustavo Padovan1-0/+1
When merging sync_files there is a case when we can end up with only one fence in the merged sync_file: when all fences belong to the same timeline. So for this case a fence_array is not created instead we just assigned the fence to sync_file->fence. Then we do not use the fences array anymore nor does free it. This patch frees the array. Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1474442419-6040-1-git-send-email-gustavo@padovan.org
2016-09-20dma-buf/sync_file: Increment refcount of fence when all are signaled.Rafael Antognolli1-4/+2
When we merge several fences, if all of them are signaled already, we still keep one of them. So instead of using add_fence(), which will not increase the refcount of signaled fences, we should explicitly call fence_get() for the fence we are keeping. This patch fixes a kernel panic that can be triggered by creating a fence that is expired (or increasing the timeline until it expires), then creating a merged fence out of it, and deleting the merged fence. This will make the original expired fence's refcount go to zero. Testcase: igt/sw_sync/sync_expired_merge Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473966865-4508-1-git-send-email-rafael.antognolli@intel.com
2016-09-13dma-buf/sync-file: Avoid enable fence signaling if poll(.timeout=0)Chris Wilson1-1/+2
If we being polled with a timeout of zero, a nonblocking busy query, we don't need to install any fence callbacks as we will not be waiting. As we only install the callback once, the overhead comes from the atomic bit test that also causes serialisation between threads. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160829181613.30722-1-chris@chris-wilson.co.uk
2016-08-22reservation: fix small comment typoRob Clark1-1/+1
Signed-off-by: Rob Clark <robdclark@gmail.com> [danvet: Mark up as function for proper cross-linking.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471640134-30888-1-git-send-email-robdclark@gmail.com
2016-08-17dma-buf: fix kernel-doc warning and typosRandy Dunlap1-3/+3
Fix dma-buf kernel-doc warning and 2 minor typos in fence_array_create(). Fixes this warning: ..//drivers/dma-buf/fence-array.c:124: warning: No description found for parameter 'signal_on_any' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/224865a5-947d-9a28-c60a-18fa86bc9329@infradead.org
2016-08-16dma-buf: Wait on the reservation object when sync'ing before CPU accessChris Wilson1-0/+23
Rendering operations to the dma-buf are tracked implicitly via the reservation_object (dmabuf->resv). This is used to allow poll() to wait upon outstanding rendering (or just query the current status of rendering). The dma-buf sync ioctl allows userspace to prepare the dma-buf for CPU access, which should include waiting upon rendering. (Some drivers may need to do more work to ensure that the dma-buf mmap is coherent as well as complete.) v2: Always wait upon the reservation object implicitly. We choose to do it after the native handler in case it can do so more efficiently. Testcase: igt/prime_vgem Testcase: igt/gem_concurrent_blit # *vgem* Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1471275738-31994-1-git-send-email-chris@chris-wilson.co.uk
2016-08-15dma-buf/sw_sync: de-stage SW_SYNCGustavo Padovan6-0/+735
SW_SYNC allows to run tests on the sync_file framework via debugfs on <debugfs>/sync/sw_sync Opening and closing the file triggers creation and release of a sync timeline. To create fences on this timeline the SW_SYNC_IOC_CREATE_FENCE ioctl should be used. To increment the timeline value use SW_SYNC_IOC_INC. Also it exports Sync information on <debugfs>/sync/info Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-11dma-buf/sync_file: only enable fence signalling on poll()Gustavo Padovan1-13/+8
Signalling doesn't need to be enabled at sync_file creation, it is only required if userspace waiting the fence to signal through poll(). Thus we delay fence_add_callback() until poll is called. It only adds the callback the first time poll() is called. This avoid re-adding the same callback multiple times. v2: rebase and update to work with new fence support for sync_file v3: use atomic operation to set enabled and protect fence_add_callback() v4: use user bit from fence flags (comment from Chris Wilson) v5: use ternary if on poll return (comment from Chris Wilson) Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: remove unused var status] Link: http://patchwork.freedesktop.org/patch/msgid/1470404378-27961-1-git-send-email-gustavo@padovan.org
2016-08-11dma-buf/sync_file: add sync_file_get_fence()Gustavo Padovan1-0/+23
Creates a function that given an sync file descriptor returns a fence containing all fences in the sync_file. v2: Comments by Daniel Vetter - Adapt to new version of fence_collection_init() - Hold a reference for the fence we return v3: - Adapt to use fput() directly - rename to sync_file_get_fence() as we always return one fence v4: Adapt to use fence_array v5: set fence through fence_get() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-11dma-buf/sync_file: refactor fence storage in struct sync_fileGustavo Padovan1-59/+115
Create sync_file->fence to abstract the type of fence we are using for each sync_file. If only one fence is present we use a normal struct fence but if there is more fences to be added to the sync_file a fence_array is created. This change cleans up sync_file a bit. We don't need to have sync_file_cb array anymore. Instead, as we always have one fence, only one fence callback is registered per sync_file. v2: Comments from Chris Wilson and Christian König - Not using fence_ops anymore - fence_is_array() was created to differentiate fence from fence_array - fence_array_teardown() is now exported and used under fence_is_array() - struct sync_file lost num_fences member v3: Comments from Chris Wilson and Christian König - struct sync_file lost status member in favor of fence_is_signaled() - drop use of fence_array_teardown() - use sizeof(*fence) to allocate only an array on fence pointers v4: Comments from Chris Wilson - use sizeof(*fence) to reallocate array - fix typo in comments - protect num_fences sum against overflows - use array->base instead of casting the to struct fence v5: fixes checkpatch warnings v6: fix case where all fences are signaled. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-08-11dma-buf/fence-array: add fence_is_array()Gustavo Padovan1-0/+1
Add helper to check if fence is array. v2: Comments from Chris Wilson - remove ternary if from ops comparison - add EXPORT_SYMBOL(fence_array_ops) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-07-18dma-buf: Release module reference on creation failureChris Wilson1-4/+11
If we fail to create the anon file, we need to remember to release the module reference on the owner. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468840582-21469-1-git-send-email-chris@chris-wilson.co.uk
2016-07-13dma-buf/sync_file: improve Kconfig description for Sync FilesGustavo Padovan1-3/+12
We've got a complaint saying that the description was quite obtuse and indeed it was. This patch tries to improve it. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-06-20dma-buf: remove dma_buf_debugfs_create_file()Mathias Krause1-20/+9
There is only a single user of dma_buf_debugfs_create_file() and that one got the function pointer cast wrong. With that one fixed, there is no need to have a wrapper for debugfs_create_file(), just call it directly. With no users left, we can remove dma_buf_debugfs_create_file(). While at it, simplify the error handling in dma_buf_init_debugfs() slightly. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1466339491-12639-2-git-send-email-minipli@googlemail.com
2016-06-20dma-buf: remove dma_buf directory on bufinfo file creation errorsMathias Krause1-1/+4
Change the error handling in dma_buf_init_debugfs() to remove the "dma_buf" directory if creating the "bufinfo" file fails. No need to have an empty debugfs directory around. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-06-20dma-buf: propagate errors from dma_buf_describe() on debugfs readMathias Krause1-11/+3
The callback function dma_buf_describe() returns an int not void so the function pointer cast in dma_buf_show() is wrong. dma_buf_describe() can also fail when acquiring the mutex gets interrupted so always returning 0 in dma_buf_show() is wrong, too. Fix both issues by avoiding the indirection via dma_buf_show() and call dma_buf_describe() directly. Rename it to dma_buf_debug_show() to get it in line with the other functions. This type mismatch was caught by the PaX RAP plugin. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-06-09Merge tag 'topic/drm-misc-2016-06-07' of ↵Dave Airlie4-6/+150
git://anongit.freedesktop.org/drm-intel into drm-next As promised, piles of prep work all around: - drm_atomic_state rework, prep for nonblocking commit helpers - fence patches from Gustavo and Christian to prep for atomic fences and some cool work in ttm/amdgpu from Christian - drm event prep for both nonblocking commit and atomic fences - Gustavo seems on a crusade against the non-kms-native version of the vblank functions. - prep work from Boris to nuke all the silly ->best_encoder implementations we have (we really only need that for truly dynamic cases like dvi-i vs dvi-d or dp mst selecting the right transcoder on intel) - prep work from Laurent to rework the format handling functions - and few small things all over * tag 'topic/drm-misc-2016-06-07' of git://anongit.freedesktop.org/drm-intel: (47 commits) drm/dsi: Implement set tear scanline drm/fb_cma_helper: Implement fb_mmap callback drm/qxl: Remove useless drm_fb_get_bpp_depth() call drm/ast: Remove useless drm_fb_get_bpp_depth() call drm/atomic: Fix remaining places where !funcs->best_encoder is valid drm/core: Change declaration for gamma_set. Documentation: add fence-array to kernel DocBook drm/shmobile: use drm_crtc_vblank_{get,put}() drm/radeon: use drm_crtc_vblank_{get,put}() drm/qxl: use drm_crtc_vblank_{get,put}() drm/atmel: use drm_crtc_vblank_{get,put}() drm/armada: use drm_crtc_vblank_{get,put}() drm/amdgpu: use drm_crtc_vblank_{get,put}() drm/virtio: use drm_crtc_send_vblank_event() drm/udl: use drm_crtc_send_vblank_event() drm/qxl: use drm_crtc_send_vblank_event() drm/atmel: use drm_crtc_send_vblank_event() drm/armada: use drm_crtc_send_vblank_event() drm/doc: Switch to sphinx/rst fixed-width quoting drm/doc: Drop kerneldoc for static functions in drm_irq.c ...
2016-06-03dma-buf/sync_file: fix build warning with context format typeGustavo Padovan1-1/+1
Christian König changed fence context to a u64 type, so we need to update all users accordingly. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464968791-4564-1-git-send-email-gustavo@padovan.org
2016-06-02dma-buf/fence: add signal_on_any to the fence array v2Christian König1-8/+25
If @signal_on_any is true the fence array signals if any fence in the array signals, otherwise it signals when all fences in the array signal. v2: fix signaled test and add comment suggested by Chris Wilson. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-4-git-send-email-deathsimple@vodafone.de
2016-06-02dma-buf/fence: add fence_array fences v6Gustavo Padovan2-1/+128
struct fence_array inherits from struct fence and carries a collection of fences that needs to be waited together. It is useful to translate a sync_file to a fence to remove the complexity of dealing with sync_files on DRM drivers. So even if there are many fences in the sync_file that needs to waited for a commit to happen, they all get added to the fence_collection and passed for DRM use as a standard struct fence. That means that no changes needed to any driver besides supporting fences. To avoid fence_array's fence allocates a new timeline if needed (when combining fences from different timelines). v2: Comments by Daniel Vetter: - merge fence_collection_init() and fence_collection_add() - only add callbacks at ->enable_signalling() - remove fence_collection_put() - check for type on to_fence_collection() - adjust fence_is_later() and fence_later() to WARN_ON() if they are used with collection fences. v3: - Initialize fence_cb.node at fence init. Comments by Chris Wilson: - return "unbound" on fence_collection_get_timeline_name() - don't stop adding callbacks if one fails - remove redundant !! on fence_collection_enable_signaling() - remove redundant () on fence_collection_signaled - use fence_default_wait() instead v4 (chk): Rework, simplification and cleanup: - Drop FENCE_NO_CONTEXT handling, always allocate a context. - Rename to fence_array. - Return fixed driver name. - Register only one callback at a time. - Document that create function takes ownership of array. v5 (chk): More work and fixes: - Avoid deadlocks by adding all callbacks at once again. - Stop trying to remove the callbacks. - Provide context and sequence number for the array fence. v6 (chk): Fixes found during testing - Fix stupid typo in _enable_signaling(). Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> [danvet: Improve commit message as suggested by Gustavo.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-3-git-send-email-deathsimple@vodafone.de
2016-06-02dma-buf/fence: make fence context 64 bit v2Christian König1-4/+4
Fence contexts are created on the fly (for example) by the GPU scheduler used in the amdgpu driver as a result of an userspace request. Because of this userspace could in theory force a wrap around of the 32bit context number if it doesn't behave well. Avoid this by increasing the context number to 64bits. This way even when userspace manages to allocate a billion contexts per second it takes more than 500 years for the context number to wrap around. v2: fix printf formats as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1464786612-5010-2-git-send-email-deathsimple@vodafone.de
2016-05-31dma-buf: use vma_pages()Muhammad Falak R Wani1-3/+4
Replace explicit computation of vma page count by a call to vma_pages(). Also, include <linux/mm.h> Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-05-31reservation: add headerdoc commentsRob Clark1-4/+68
Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2016-04-30dma-buf/sync_file: de-stage sync_fileGustavo Padovan3-0/+407
sync_file is useful to connect one or more fences to the file. The file is used by userspace to track fences between drivers that share DMA bufs. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-21dma-buf: Update docs for SYNC ioctlDaniel Vetter1-1/+1
Just a bit of wording polish plus mentioning that it can fail and must be restarted. Requested by Sumit. v2: Fix them typos (Hans). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Cc: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-03-19dma-buf, drm, ion: Propagate error code from dma_buf_start_cpu_access()Chris Wilson1-6/+11
Drivers, especially i915.ko, can fail during the initial migration of a dma-buf for CPU access. However, the error code from the driver was not being propagated back to ioctl and so userspace was blissfully ignorant of the failure. Rendering corruption ensues. Whilst fixing the ioctl to return the error code from dma_buf_start_cpu_access(), also do the same for dma_buf_end_cpu_access(). For most drivers, dma_buf_end_cpu_access() cannot fail. i915.ko however, as most drivers would, wants to avoid being uninterruptible (as would be required to guarrantee no failure when flushing the buffer to the device). As userspace already has to handle errors from the SYNC_IOCTL, take advantage of this to be able to restart the syscall across signals. This fixes a coherency issue for i915.ko as well as reducing the uninterruptible hold upon its BKL, the struct_mutex. Fixes commit c11e391da2a8fe973c3c2398452000bed505851e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Feb 11 20:04:51 2016 -0200 dma-buf: Add ioctls to allow userspace to flush Testcase: igt/gem_concurrent_blit/*dmabuf*interruptible Testcase: igt/prime_mmap_coherency/ioctl-errors Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tiago Vignatti <tiago.vignatti@intel.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Cc: intel-gfx@lists.freedesktop.org Cc: devel@driverdev.osuosl.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458331359-2634-1-git-send-email-chris@chris-wilson.co.uk
2016-02-12dma-buf: Add ioctls to allow userspace to flushDaniel Vetter1-0/+45
The userspace might need some sort of cache coherency management e.g. when CPU and GPU domains are being accessed through dma-buf at the same time. To circumvent this problem there are begin/end coherency markers, that forward directly to existing dma-buf device drivers vfunc hooks. Userspace can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence would be used like following: - mmap dma-buf fd - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write to mmap area 3. SYNC_END ioctl. This can be repeated as often as you want (with the new data being consumed by the GPU or say scanout device) - munmap once you don't need the buffer any more v2 (Tiago): Fix header file type names (u64 -> __u64) v3 (Tiago): Add documentation. Use enum dma_buf_sync_flags to the begin/end dma-buf functions. Check for overflows in start/length. v4 (Tiago): use 2d regions for sync. v5 (Tiago): forget about 2d regions (v4); use _IOW in DMA_BUF_IOCTL_SYNC and remove range information from struct dma_buf_sync. v6 (Tiago): use __u64 structured padded flags instead enum. Adjust documentation about the recommendation on using sync ioctls. v7 (Tiago): Alex' nit on flags definition and being even more wording in the doc about sync usage. v9 (Tiago): remove useless is_dma_buf_file check. Fix sync.flags conditionals and its mask order check. Add <linux/types.h> include in dma-buf.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455228291-29640-1-git-send-email-tiago.vignatti@intel.com
2016-02-09dma-buf: Remove range-based flushTiago Vignatti1-9/+4
This patch removes range-based information used for optimizations in begin_cpu_access and end_cpu_access. We don't have any user nor implementation using range-based flush. It seems a consensus that if we ever want something like that again (or even more robust using 2D, 3D sub-range regions) we can use the upcoming dma-buf sync ioctl for such. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Tiago Vignatti <tiago.vignatti@intel.com> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1450820214-12509-3-git-send-email-tiago.vignatti@intel.com
2015-10-30dma-buf/fence: add fence_wait_any_timeout function v2Christian König1-0/+98
Waiting for the first fence in an array of fences to signal. This is useful for device driver specific resource managers and also Vulkan needs something similar. v2: more parameter checks, handling for timeout==0, remove NULL entry support, better callback removal. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2015-05-21dma-buf: Minor coding style fixesJagan Teki3-6/+20
- WARNING: Missing a blank line after declarations - WARNING: line over 80 characters - WARNING: please, no space before tabs Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2015-05-13dma-buf: add ref counting for module as exporterSumit Semwal1-1/+9
Add reference counting on a kernel module that exports dma-buf and implements its operations. This prevents the module from being unloaded while DMABUF file is in use. The original patch [1] was submitted by Tomasz Stanislawski, but this is a simpler way to do it. v3: call module_put() as late as possible, per gregkh's comment. v2: move owner to struct dma_buf, and use DEFINE_DMA_BUF_EXPORT_INFO macro to simplify the change. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [1]: https://lkml.org/lkml/2012/8/8/163
2015-04-21dma-buf: cleanup dma_buf_export() to make it easily extensibleSumit Semwal1-25/+22
At present, dma_buf_export() takes a series of parameters, which makes it difficult to add any new parameters for exporters, if required. Make it simpler by moving all these parameters into a struct, and pass the struct * as parameter to dma_buf_export(). While at it, unite dma_buf_export_named() with dma_buf_export(), and change all callers accordingly. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2015-01-22reservation: Remove shadowing local variable 'ret'Michel Dänzer1-2/+0
It was causing the return value of fence_is_signaled to be ignored, making reservation objects signal too early. Cc: stable@vger.kernel.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2015-01-22dma-buf/fence: don't wait when specified timeout is zeroJammy Zhou1-0/+3
When specified timeout is zero for fence_wait_timeout, just check if the fence is signaled or not without wait. Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-By: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2015-01-22reservation: wait only with non-zero timeout specified (v3)Jammy Zhou1-0/+3
When the timeout value passed to reservation_object_wait_timeout_rcu is zero, no wait should be done if the fences are not signaled. Return '1' for idle and '0' for busy if the specified timeout is '0' to keep consistent with the case of non-zero timeout. v2: call fence_put if not signaled in the case of timeout==0 v3: switch to reservation_object_test_signaled_rcu Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-By: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-11-03treewide: Fix typo in Documentation/DocBook/device-driversMasanari Iida1-1/+1
This patch fix speeling typo found in html files within Documentation/DocBook/device-drivers. It is because html files are generated from comments in source, so I have to fix comments in the source. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2014-10-09dma-buf: don't open-code atomic_long_read()Al Viro1-1/+1
... not to mention that even atomic_long_read() is too low-level here - there's file_count(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-28dma-buf/fence: Fix a kerneldoc warningThierry Reding1-1/+1
kerneldoc doesn't know how to parse variables, so don't let it try. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-07-09reservation: add suppport for read-only access using rcuMaarten Lankhorst3-38/+347
This adds some extra functions to deal with rcu. reservation_object_get_fences_rcu() will obtain the list of shared and exclusive fences without obtaining the ww_mutex. reservation_object_wait_timeout_rcu() will wait on all fences of the reservation_object, without obtaining the ww_mutex. reservation_object_test_signaled_rcu() will test if all fences of the reservation_object are signaled without using the ww_mutex. reservation_object_get_excl and reservation_object_get_list require the reservation object to be held, updating requires write_seqcount_begin/end. If only the exclusive fence is needed, rcu_dereference followed by fence_get_rcu can be used, if the shared fences are needed it's recommended to use the supplied functions. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09reservation: update api and add some helpersMaarten Lankhorst2-12/+179
Move the list of shared fences to a struct, and return it in reservation_object_get_list(). Add reservation_object_get_excl to get the exclusive fence. Add reservation_object_reserve_shared(), which reserves space in the reservation_object for 1 more shared fence. reservation_object_add_shared_fence() and reservation_object_add_excl_fence() are used to assign a new fence to a reservation_object pointer, to complete a reservation. Changes since v1: - Add reservation_object_get_excl, reorder code a bit. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09dma-buf: add poll support, v3Maarten Lankhorst1-0/+108
Thanks to Fengguang Wu for spotting a missing static cast. v2: - Kill unused variable need_shared. v3: - Clarify the BUG() in dma_buf_release some more. (Rob Clark) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09dma-buf: use reservation objectsMaarten Lankhorst1-2/+20
This allows reservation objects to be used in dma-buf. it's required for implementing polling support on the fences that belong to a dma-buf. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/ Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08seqno-fence: Hardware dma-buf implementation of fencing (v6)Maarten Lankhorst2-1/+74
This type of fence can be used with hardware synchronization for simple hardware that can block execution until the condition (dma_buf[offset] - value) >= 0 has been met when WAIT_GEQUAL is used, or (dma_buf[offset] != 0) has been met when WAIT_NONZERO is set. A software fallback still has to be provided in case the fence is used with a device that doesn't support this mechanism. It is useful to expose this for graphics cards that have an op to support this. Some cards like i915 can export those, but don't have an option to wait, so they need the software fallback. I extended the original patch by Rob Clark. v1: Original v2: Renamed from bikeshed to seqno, moved into dma-fence.c since not much was left of the file. Lots of documentation added. v3: Use fence_ops instead of custom callbacks. Moved to own file to avoid circular dependency between dma-buf.h and fence.h v4: Add spinlock pointer to seqno_fence_init v5: Add condition member to allow wait for != 0. Fix small style errors pointed out by checkpatch. v6: Move to a separate file. Fix up api changes in fences. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> #v4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08fence: dma-buf cross-device synchronization (v18)Maarten Lankhorst2-1/+432
A fence can be attached to a buffer which is being filled or consumed by hw, to allow userspace to pass the buffer without waiting to another device. For example, userspace can call page_flip ioctl to display the next frame of graphics after kicking the GPU but while the GPU is still rendering. The display device sharing the buffer with the GPU would attach a callback to get notified when the GPU's rendering-complete IRQ fires, to update the scan-out address of the display, without having to wake up userspace. A driver must allocate a fence context for each execution ring that can run in parallel. The function for this takes an argument with how many contexts to allocate: + fence_context_alloc() A fence is transient, one-shot deal. It is allocated and attached to one or more dma-buf's. When the one that attached it is done, with the pending operation, it can signal the fence: + fence_signal() To have a rough approximation whether a fence is fired, call: + fence_is_signaled() The dma-buf-mgr handles tracking, and waiting on, the fences associated with a dma-buf. The one pending on the fence can add an async callback: + fence_add_callback() The callback can optionally be cancelled with: + fence_remove_callback() To wait synchronously, optionally with a timeout: + fence_wait() + fence_wait_timeout() When emitting a fence, call: + trace_fence_emit() To annotate that a fence is blocking on another fence, call: + trace_fence_annotate_wait_on(fence, on_fence) A default software-only implementation is provided, which can be used by drivers attaching a fence to a buffer when they have no other means for hw sync. But a memory backed fence is also envisioned, because it is common that GPU's can write to, or poll on some memory location for synchronization. For example: fence = custom_get_fence(...); if ((seqno_fence = to_seqno_fence(fence)) != NULL) { dma_buf *fence_buf = seqno_fence->sync_buf; get_dma_buf(fence_buf); ... tell the hw the memory location to wait ... custom_wait_on(fence_buf, seqno_fence->seqno_ofs, fence->seqno); } else { /* fall-back to sw sync * / fence_add_callback(fence, my_cb); } On SoC platforms, if some other hw mechanism is provided for synchronizing between IP blocks, it could be supported as an alternate implementation with it's own fence ops in a similar way. enable_signaling callback is used to provide sw signaling in case a cpu waiter is requested or no compatible hardware signaling could be used. The intention is to provide a userspace interface (presumably via eventfd) later, to be used in conjunction with dma-buf's mmap support for sw access to buffers (or for userspace apps that would prefer to do their own synchronization). v1: Original v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided that dma-fence didn't need to care about the sw->hw signaling path (it can be handled same as sw->sw case), and therefore the fence->ops can be simplified and more handled in the core. So remove the signal, add_callback, cancel_callback, and wait ops, and replace with a simple enable_signaling() op which can be used to inform a fence supporting hw->hw signaling that one or more devices which do not support hw signaling are waiting (and therefore it should enable an irq or do whatever is necessary in order that the CPU is notified when the fence is passed). v3: Fix locking fail in attach_fence() and get_fence() v4: Remove tie-in w/ dma-buf.. after discussion w/ danvet and mlankorst we decided that we need to be able to attach one fence to N dma-buf's, so using the list_head in dma-fence struct would be problematic. v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager. v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments about checking if fence fired or not. This is broken by design. waitqueue_active during destruction is now fatal, since the signaller should be holding a reference in enable_signalling until it signalled the fence. Pass the original dma_fence_cb along, and call __remove_wait in the dma_fence_callback handler, so that no cleanup needs to be performed. v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if fence wasn't signaled yet, for example for hardware fences that may choose to signal blindly. v8: [ Maarten Lankhorst ] Tons of tiny fixes, moved __dma_fence_init to header and fixed include mess. dma-fence.h now includes dma-buf.h All members are now initialized, so kmalloc can be used for allocating a dma-fence. More documentation added. v9: Change compiler bitfields to flags, change return type of enable_signaling to bool. Rework dma_fence_wait. Added dma_fence_is_signaled and dma_fence_wait_timeout. s/dma// and change exports to non GPL. Added fence_is_signaled and fence_enable_sw_signaling calls, add ability to override default wait operation. v10: remove event_queue, use a custom list, export try_to_wake_up from scheduler. Remove fence lock and use a global spinlock instead, this should hopefully remove all the locking headaches I was having on trying to implement this. enable_signaling is called with this lock held. v11: Use atomic ops for flags, lifting the need for some spin_lock_irqsaves. However I kept the guarantee that after fence_signal returns, it is guaranteed that enable_signaling has either been called to completion, or will not be called any more. Add contexts and seqno to base fence implementation. This allows you to wait for less fences, by testing for seqno + signaled, and then only wait on the later fence. Add FENCE_TRACE, FENCE_WARN, and FENCE_ERR. This makes debugging easier. An CONFIG_DEBUG_FENCE will be added to turn off the FENCE_TRACE spam, and another runtime option can turn it off at runtime. v12: Add CONFIG_FENCE_TRACE. Add missing documentation for the fence->context and fence->seqno members. v13: Fixup CONFIG_FENCE_TRACE kconfig description. Move fence_context_alloc to fence. Simplify fence_later. Kill priv member to fence_cb. v14: Remove priv argument from fence_add_callback, oops! v15: Remove priv from documentation. Explicitly include linux/atomic.h. v16: Add trace events. Import changes required by android syncpoints. v17: Use wake_up_state instead of try_to_wake_up. (Colin Cross) Fix up commit description for seqno_fence. (Rob Clark) v18: Rename release_fence to fence_release. Move to drivers/dma-buf/. Rename __fence_is_signaled and __fence_signal to *_locked. Rename __fence_init to fence_init. Make fence_default_wait return a signed long, and fix wait ops too. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> #use smp_mb__before_atomic() Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08dma-buf: move to drivers/dma-bufMaarten Lankhorst3-0/+783
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>