summaryrefslogtreecommitdiff
path: root/drivers/extcon/extcon-max8997.c
AgeCommit message (Collapse)AuthorFilesLines
2018-11-14extcon: max8997: Fix lack of path setting in USB device modeMarek Szyprowski1-6/+4
MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-11-12extcon: max8997: Avoid forcing UART path on drive probeMarek Szyprowski1-2/+13
Driver unconditionally forces UART path during probe, probably to ensure that one can get kernel serial log as soon as possible. This approach causes some issues, especially when board is booted with non-UART cable connected to micro-USB port. For example, when USB cable is connected, UART TX/RX lines are unconditionally short-circuited to USB D+/D- lines. This is in turn recognized by a series of serial BREAK signals and some random characters when USB host tries to perform enumeration procedure. To solve the above issue and keep UART console operational as early as possible, set UART path only when USB ID reports UART capable cable. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-08-28extcon: maxim: Add SPDX license identifiersKrzysztof Kozlowski1-16/+6
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-11-27extcon: max8997: Delete unneeded initialization in max8997_muic_set_path()Markus Elfring1-1/+1
The variable "ret" will be set to an appropriate value a bit later. Thus this patch omits the explicit initialization at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-13extcon: Use the extcon_set_state_sync() instead of deprecated functionsChanwoo Choi1-10/+10
This patch alters the renamed extcon API to set the state of the external connectors instead of deprecated extcon_set_cable_state_(). Because the patch[1] modifies the function name to maintain the function naming pattern. - extcon_set_cable_state_() -> extcon_set_state_sync() - extcon_get_cable_state_() -> extcon_get_state() [1] https://lkml.org/lkml/2016/8/4/729 - extcon: Rename the extcon_set/get_state() to maintain the function naming pattern Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Roger Quadros <rogerq@ti.com>
2016-01-25extcon: Add the EXTCON_CHG_USB_SDP to support SDP charing portChanwoo Choi1-0/+3
This patch adds the new EXTCON_CHG_USB_SDP connector to support SDP (Standard Downstream Port) USB charging port. The commit 11eecf910bd8 ("extcon: Modify the id and name of external connector") add the new EXTCON_CHG_USB_SDP connector which support the both data transfer and usb charging at the same time. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-10-16extcon: Modify the id and name of external connectorChanwoo Choi1-10/+11
This patch modifies the id and name of external connector with the additional prefix to clarify both attribute and meaning of external connector as following: - EXTCON_CHG_* mean the charger connector. - EXTCON_JACK_* mean the jack connector. - EXTCON_DISP_* mean the display port connector. Following table show the new name of external connector with old name: -------------------------------------------------- Old extcon name | New extcon name | -------------------------------------------------- EXTCON_TA | EXTCON_CHG_USB_DCP | EXTCON_CHARGE_DOWNSTREAM| EXTCON_CHG_USB_CDP | EXTCON_FAST_CHARGER | EXTCON_CHG_USB_FAST | EXTCON_SLOW_CHARGER | EXTCON_CHG_USB_SLOW | -------------------------------------------------- EXTCON_MICROPHONE | EXTCON_JACK_MICROPHONE | EXTCON_HEADPHONE | EXTCON_JACK_HEADPHONE | EXTCON_LINE_IN | EXTCON_JACK_LINE_IN | EXTCON_LINE_OUT | EXTCON_JACK_LINE_OUT | EXTCON_VIDEO_IN | EXTCON_JACK_VIDEO_IN | EXTCON_VIDEO_OUT | EXTCON_JACK_VIDEO_OUT | EXTCON_SPDIF_IN | EXTCON_JACK_SPDIF_IN | EXTCON_SPDIF_OUT | EXTCON_JACK_SPDIF_OUT | -------------------------------------------------- EXTCON_HMDI | EXTCON_DISP_HDMI | EXTCON_MHL | EXTCON_DISP_MHL | EXTCON_DVI | EXTCON_DISP_DVI | EXTCON_VGA | EXTCON_DISP_VGA | -------------------------------------------------- And, when altering the name of USB charger connector, EXTCON refers to the "Battery Charging v1.2 Spec and Adopters Agreement"[1] to use the standard name of USB charging port as following. Following name of USB charging port are already used in power_supply subsystem. We chan check it on patch[2]. - EXTCON_CHG_USB_SDP /* Standard Downstream Port */ - EXTCON_CHG_USB_DCP /* Dedicated Charging Port */ - EXTCON_CHG_USB_CDP /* Charging Downstream Port */ - EXTCON_CHG_USB_ACA /* Accessory Charger Adapter */ [1] www.usb.org/developers/docs/devclass_docs/BCv1.2_070312.zip [2] commit 85efc8a18ced ("power_supply: Add types for USB chargers") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [ckeepax: For the Arizona changes] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Roger Quadros <rogerq@ti.com>
2015-06-13extcon: Redefine the unique id of supported external connectors without ↵Chanwoo Choi1-1/+1
'enum extcon' type This patch just redefine the unique id of supported external connectors without 'enum extcon' type. Because unique id would be used on devictree file(*.dts) to indicate the specific external connectors like key number of input framework. So, I have the plan to move this definitions to following header file which includes the unique id of supported external connectors. - include/dt-bindings/extcon/extcon.h Fixes: 2a9de9c0f08d ("extcon: Use the unique id for external connector instead of string") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-22extcon: Use the unique id for external connector instead of stringChanwoo Choi1-36/+23
This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* USB external connector */ EXTCON_USB = 0x1, EXTCON_USB_HOST = 0x2, /* Charger external connector */ EXTCON_TA = 0x10, EXTCON_FAST_CHARGER = 0x11, EXTCON_SLOW_CHARGER = 0x12, EXTCON_CHARGE_DOWNSTREAM = 0x13, /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, EXTCON_LINE_OUT = 0x21, EXTCON_MICROPHONE = 0x22, EXTCON_HEADPHONE = 0x23, EXTCON_HDMI = 0x30, EXTCON_MHL = 0x31, EXTCON_DVI = 0x32, EXTCON_VGA = 0x33, EXTCON_SPDIF_IN = 0x34, EXTCON_SPDIF_OUT = 0x35, EXTCON_VIDEO_IN = 0x36, EXTCON_VIDEO_OUT = 0x37, /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, EXTCON_JIG = 0x51, EXTCON_MECHANICAL = 0x52, EXTCON_END, }; For example in extcon-arizona.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the unique id for external connector insteadf of string] Reported-by: Arnd Bergmann <arnd@arndb.de> [dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()] Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-05-19extcon: Remove the optional name of extcon deviceChanwoo Choi1-1/+0
This patch removes the optional name of extcon device. Instead, extcon_dev_register() set the device name as 'extcon[number]' naming pattern. - /sys/class/extcon/[hardcoded device name] -> /sys/class/extcon/extcon[number] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Jaewon Kim <jaewon02.kim@samsung.com>
2015-05-19extcon: Unify the dock device names on max8997/77693Chanwoo Choi1-7/+3
This patch change the name of various dock devices as 'DOCK' because the name of various dock devices have not the standard naming rules. The name of dock devices include the differenct word but it is ambiguous and never important information on user-space aspect. This patch unifies the name of dock devices as following: - Dock-Smart -->|--> DOCK - Dock-Desk -->| - Dock-Audio -->| - Dock-Card -->| Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-03-07extcon: Fix the checkpatch warningChanwoo Choi1-4/+1
This patch fixes the checkpatch warning about coding style. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-10-20extcon: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-23extcon: Remove unnecessary OOM messagesJingoo Han1-3/+1
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. The following checkpatch warning is also removed. WARNING: Possible unnecessary 'out of memory' message Signed-off-by: Jingoo Han <jg1.han@samsung.com> [Acked by Charles Keepax for arizona part] Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-16extcon: Set parent device of extcon device using prameter of ↵Chanwoo Choi1-1/+0
devm_extcon_dev_allocate This patch set the parent device of extcon device using first parameter of devm_extco_dev_allocate() to remove duplicate code on all of extcon provider drivers. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reported-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2014-04-29extcon: max8997: Use devm_extcon_dev_allocate for extcon_devChanwoo Choi1-4/+3
This patch use devm_extcon_dev_allocate() to simplify the memory control of extcon device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Felipe Balbi <balbi@ti.com>
2014-04-24extcon: max8997: Use devm_extcon_dev_register()Sangjung Woo1-3/+1
Use the resource-managed extcon device register function (i.e. devm_extcon_dev_register()) instead of extcon_dev_register(). If extcon device is attached with this function, that extcon device is automatically unregistered on driver detach. That reduces tiresome managing code. Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24extcon: max8997: Use power efficient workqueue for delayed cable detectionKrzysztof Kozlowski1-1/+2
Schedule delayed cable detection work on power efficient workqueue so the scheduler won't wake up idle core for that work. This extends the idle time for CPU cores and conserves power. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-04-24extcon: max8997: Fix NULL pointer exception on missing pdataKrzysztof Kozlowski1-1/+1
Fix NULL pointer exception when platform data is not supplied. The driver dereferenced pdata pointer where it could be NULL. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Fixes: 810d601f07c Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-27Merge tag 'extcon-next-for-3.13' of ↵Greg Kroah-Hartman1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 3.13 This patchset modify extcon core to remove unnecessary allocation sequence for 'dev' instance and change extcon_dev_register() interface. extcon-gpio use gpiolib API to get debounce time and include small fix of extcon core/device driver. Detailed description for patchset: 1. Modify extcon core driver - The extcon-gpio driver use gpio_set_debounce() API provided from gpiolib if gpio driver for SoC support gpio_set_debounce() function and support 'gpio_ activ_low' filed to check whether gpio active state is 1(high) or 0(low). - Change field type of 'dev' in structure extcon_dev and remove the sequence of allocating memory of 'struct dev' on extcon_dev_register() function because extcon device must need 'struct device. - Change extcon_dev_register() prototype to simplify it and remove unnecessary parameter as below: 2. Fix coding style and typo - extcon core : Fix indentation coding style and remove unnecessary casting - extcon-max8997 : Fix checkpatch warning - extcon-max77693 : Fix checkpatch warning - extcon-arizona : Fix typo of comment and modify minor issue - extcon-palmas : Use dev_get_platdata() 3. Modify extcon-arizona driver - Modify minor issue about micbias and comparision statement
2013-09-27extcon: Simplify extcon_dev_register() prototype by removing unnecessary ↵Chanwoo Choi1-1/+2
parameter This patch remove extcon_dev_register()'s second parameter which means the pointer of parent device to simplify prototype of this function. So, if extcon device has the parent device, it should set the pointer of parent device to edev.dev.parent in extcon device driver instead of in extcon_dev_register(). Cc: Graeme Gregory <gg@slimlogic.co.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-09-27extcon: max8997: Fix checkpatch warningSachin Kamat1-1/+1
Fixes the following warning: WARNING: space prohibited before semicolon Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2013-09-26extcon: Fix up 80 column coding style issuesChanwoo Choi1-2/+4
This patch fix 80 column coding sytle issues by using checkpatch script. Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09extcon: max8997: Fix return valueSachin Kamat1-5/+5
Return the value obtained from the function instead of hardcoding. Fixes the following warnings: drivers/extcon/extcon-max8997.c:235 max8997_muic_set_path() info: why not propagate 'ret' from max8997_update_reg() instead of (-11)? drivers/extcon/extcon-max8997.c:248 max8997_muic_set_path() info: why not propagate 'ret' from max8997_update_reg() instead of (-11)? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-04-09extcon: max8997: use dev_err() instead of pr_err()Jingoo Han1-1/+1
dev_err() is more preferred than pr_err(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-03-13extcon: max8997: Check the pointer of platform data to protect null pointer ↵Chanwoo Choi1-22/+34
error This patch check the pointer of platform data to protect kernel panic when platform data is not used and code clean. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Use workqueue to check cable state after completing boot of ↵Chanwoo Choi1-9/+36
platform This patch use delayed workqueue to check cable state after a certain time. If extcon-max8997 driver check cable state during booting of platform, this couldn't send the correct notification of cable state to extcon consumer. Alwasys, this driver should check cable state after the completion of platform initialization Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Set default UART/USB path on probeChanwoo Choi1-2/+26
This patch set default H/W line path according to platfomr data. The MAX8997 MUIC device can possibly set UART/USB or UART_AUX /USB_AUX to internal H/W line path of MUIC device. Namely, only one H/W line is used for two operation. For example, if H/W line path of MAX8997 device set UART/USB, micro usb cable is connected to AP(Application Processor) and if H/W line path set UART_AUX/USB_AUX, micro usb cable is connected to CP(Coprocessor). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable typeChanwoo Choi1-169/+323
This patch make max8997_muic_get_cable_type() function to remove duplicate code for checking ADC/Charger cable type because almost internal function need to read adc/chg_type value of MUIC register. Also, remove *_detach() function, extcon-max8997 driver treat attach/detach operation of cable in max8997_*_handler() function. Lastly, this patch move defined constant in header file(include/ linux/mfd/max8997.h, max8997-private.h) because defined constant is only used in the 'extcon-max8997.c'. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Set default of ADC debounce time during initializationChanwoo Choi1-0/+42
This patch set default of ADC Debounce Time(25ms) during probe step. Also, can possible change ADC Debounce Time according to H/W situation by using max8997_set_adc_debounce_time() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Remove duplicate code related to set H/W line pathChanwoo Choi1-11/+51
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Move defined constant to header fileChanwoo Choi1-61/+31
This patch move defined constants to header file(max77693-private.h) because of mask/unmask selectively interrupt of MUIC device according to attribute of H/W board. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Remove unreachable codeSachin Kamat1-1/+0
'break' after 'return' is never executed and hence can be deleted. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-02-14extcon: max8997: Make max8997_extcon_cable staticSachin Kamat1-1/+1
'max8997_extcon_cable' is used only in this file. Hence make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2013-01-15extcon: max8997/max77693: Support IRQF_NO_SUSPEND flag for interruptChanwoo Choi1-2/+4
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-11-27Merge tag 'pull_req_20121122' of ↵Greg Kroah-Hartman1-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mzx/extcon into char-misc-next MyungJoo writes: "extcon pull request targetting Linux 3.8 for Greg KH on 2012.11.22 This is based on Linux 3.7 rc6"
2012-11-27extcon: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27extcon: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-27extcon: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21extcon: max8997: Use devm_kzallocSachin Kamat1-12/+6
devm_kzalloc() is a device managed function. It makes error handling and cleanup code a bit simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-11-21extcon: max8997: Fix a typoSachin Kamat1-1/+1
Electrnoics -> Electronics Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-11-21extcon: max8997: Fix checkpatch errorSachin Kamat1-1/+1
Fixes the following checkpatch error: ERROR: space required after that ',' (ctx:VxV) 460: FILE: extcon/extcon-max8997.c:460: ret = request_threaded_irq(virq, NULL,max8997_muic_irq_handler, ^ Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-11-21extcon: max8997: Fix incorrect error check and return valueSachin Kamat1-2/+4
irq_create_mapping() returns 0 if it fails to provide a valid irq number. 'ret' needs to be updated with a negative error code before returning from probe to signal probe failure. While at it, also corrected the 'virq' type to unsigned from signed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
2012-10-22extcon-max8997: remove usage of ret in max8997_muic_handle_charger_type_detachDevendra Naga1-4/+2
actually we can do returns with error or success with out ret in this function, so remove the ret variable, and reduce a very little (4byte) space on stack of this function Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2012-07-09extcon: Add support irq domain for MAX8997 muicChanwoo Choi1-11/+18
This patch add support irq domain for Maxim MAX8997 muic instead of irq_base in platform data and max8997 driver private data are instead. It is tested on TRATS board. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-19extcon: max8997: Add missing kfree for info->edev in max8997_muic_remove()Axel Lin1-0/+1
extcon_dev_unregister(info->edev) doest not free info->edev, we need to call kfree(info->edev) here. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-19extcon: Fix wrong index in max8997_extcon_cable[]Axel Lin1-2/+2
Currently, the index of "Dock-desk" and "Dock-card" are the same. Thus the latter one overrides the first one. Then we have problem when calling extcon_find_cable_index() because edev->supported_cable[7] only matches "Dock-card". Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-23Merge tag 'driver-core-3.5-rc1' of ↵Linus Torvalds1-0/+535
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here's the driver core, and other driver subsystems, pull request for the 3.5-rc1 merge window. Outside of a few minor driver core changes, we ended up with the following different subsystem and core changes as well, due to interdependancies on the driver core: - hyperv driver updates - drivers/memory being created and some drivers moved into it - extcon driver subsystem created out of the old Android staging switch driver code - dynamic debug updates - printk rework, and /dev/kmsg changes All of this has been tested in the linux-next releases for a few weeks with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed that a patch to the deleted drivers/misc/max8997-muic.c driver needs to be applied to this one. * tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits) uio_pdrv_genirq: get irq through platform resource if not set otherwise memory: tegra{20,30}-mc: Remove empty *_remove() printk() - isolate KERN_CONT users from ordinary complete lines sysfs: get rid of some lockdep false positives Drivers: hv: util: Properly handle version negotiations. Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp() memory: tegra{20,30}-mc: Use dev_err_ratelimited() driver core: Add dev_*_ratelimited() family Driver Core: don't oops with unregistered driver in driver_find_device() printk() - restore prefix/timestamp printing for multi-newline strings printk: add stub for prepend_timestamp() ARM: tegra30: Make MC optional in Kconfig ARM: tegra20: Make MC optional in Kconfig ARM: tegra30: MC: Remove unnecessary BUG*() ARM: tegra20: MC: Remove unnecessary BUG*() printk: correctly align __log_buf ARM: tegra30: Add Tegra Memory Controller(MC) driver ARM: tegra20: Add Tegra Memory Controller(MC) driver printk() - restore timestamp printing at console output printk() - do not merge continuation lines of different threads ...
2012-05-10Extcon: add MAX8997 extcon driverChanwoo Choi1-0/+537
This patch add extcon-max8997 driver to support the muic feature of Maxim max8997 by using Extcon framework. The extcon-max8997 driver is implemented based on 'drivers/misc/ max8997-muic.c' and then use Extcon interface instead of callback function in struct max8997_muic_platform_data to notify cable state of notifee which want to know always newly cable state when external connector(e.g., USB, TA, JIG) is attached or detached. v1 - Use Extcon interface to notify cable state of notifee instead of callback function when external connector is attached or detached. - Bug fix of getting platform_data for irq_base value. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>