summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce/dce_abm.c
AgeCommit message (Collapse)AuthorFilesLines
2021-04-09drm/amd/display: use GFP_ATOMIC in dcn20_resource_constructNirmoy Das1-1/+1
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct() can't sleep. Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311 as dcn20_resource_construct() also calls into SMU functions which does mutex_lock(). Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-05drm/amd/display: Move panel_cntl specific register from abm to panel_cntl.Yongqiang Sun1-207/+8
[Why] panel_cntl specific register should be access in panel_cntl object. [How] Move these register access from abm to panel_cntl. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-28drm/amd/display: Add panel cntl id for set backlight level.Yongqiang Sun1-6/+9
[Why & How] Add panel cntl instance when calling set backlight. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-23drm/amd/display: Add SetBacklight call to abm on dmcubWyatt Wood1-2/+2
[Why] Set backlight calls to firmware are are being prevented by dmcu == null check. Dmcu is expected to be null in this case. [How] Only prevent call if dmcu and abm are null. Also rename variable 'use_smooth_brightness' to 'fw_set_brightness' as it's more appropriate. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amd/display: Implement abm config table copy to dmcubWyatt Wood1-1/+1
[Why] Driver must pass abm config table to dmub fw. This provides various parameters for abm functionality. [How] There is too much data to be passed in an inbox message, so we must pass this data using an indirect buffer. Copy the table to cw7 via x86, driver copies to fw_state structure. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-01drm/amd/display: Add ABM driver implementationWyatt Wood1-0/+1
[Why] Moving ABM from DMCU to DMCUB. [How] Add ABM driver files and implementation. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amdgpu: Add DC feature mask to disable fractional pwmLeo Li1-0/+4
[Why] Some LED panel drivers might not like fractional PWM. In such cases, backlight flickering may be observed. [How] Add a DC feature mask to disable fractional PWM, and associate it with the preexisting dc_config flag. The flag is only plumbed through the dmcu firmware, so plumb it through the driver path as well. To disable, add the following to the linux cmdline: amdgpu.dcfeaturemask=0x4 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204957 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Lukáš Krejčí <lskrejci@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-11drm/amd/display: wait for set pipe mcp command completionJosip Pavic1-0/+3
[Why] When the driver sends a pipe set command to the DMCU FW, it does not wait for the command to complete. This can lead to unpredictable behavior if, for example, the driver were to request a pipe disable to the FW via MCP, then power down some hardware before the firmware has completed processing the command. [How] Wait for the DMCU FW to finish processing set pipe commands Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-09-14drm/amd/display: remove hw access from dc_destroyJun Lei1-3/+0
[why] dc_destroy should only clean up SW, this is because GPUs may be removed before driver unload, leading to HW to be unavailable. [how] remove GPIO close as part of GPIO destroy, this is unnecessary because GPIO is not shared, and GPIOs are generally closed after being opened Add tracking to HW access during destructor to make future issues easier to pinpoint, and block access to prevent hangs. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-18drm/amd/display: Wait for backlight programming completion in set backlight ↵SivapiriyanKumarasamy1-0/+4
level [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-14Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter1-0/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
2019-06-11drm/amd: drop use of drmP.h in atom.hSam Ravnborg1-0/+2
Drop use of the deprecated drmP.h header from atom.h Fix fallout in various files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-6-sam@ravnborg.org
2019-05-31drm/amd/display: disable PSR/ABM before destroy DMCU structPaul Hsieh1-1/+12
[Why] 1. DMCU is not running on some platform but driver still send ABM command. It may cause assert due to DMCU is not alive. 2. To make sure PSR disable when driver disable [How] 1. Add dmcu_is_running in ABM struct, driver can check this flag to determine driver should send ABM command or not. 2. Send PSR disable command when destroy PSR Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Disable ABM before destroy ABM structPaul Hsieh1-0/+2
[Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: send pipe set command to dmcu when backlight is setJosip Pavic1-22/+23
[Why] Previously, a change removed code that would send a pipe set command to dmcu each time the backlight was set, as it was thought to be superfluous. However, it is possible for the backlight to be set before a valid pipe has been set, which causes DMCU to hang after a DPMS restore on some systems. [How] Send a pipe set command to DMCU prior to setting the backlight. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-19drm/amd/display: send pipe set command to dmcu when stream unblanksJosip Pavic1-15/+17
[Why] When stream is blanked, pipe set command is sent to dmcu to notify it that the abm pipe is disabled. When stream is unblanked, no notification is made to dmcu that the abm pipe has been enabled, resulting in abm not being enabled in the firmware. [How] When stream is unblanked, send a pipe set command to dmcu. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-02-06drm/amd/display: dmcu is blocking due to wrong disable ABM commandPaul Hsieh1-2/+2
[Why] Second screen to clone/extend mode, driver will send ABM pipe command to DMCU. Change mode from clone/extend to second screen only, driver send ABM level command to disable ABM but this command will not clear ABM pipe data. At this time, change second screen to PC screen only, driver will send first command "ABM_LEVEL", it will turn on ABM with incorrect ABM pile so that DMCU is blocking. [How] When driver try to disable ABM, change command from "ABM LEVEL" to "ABM PIPE" so that it will clear ABM pile data. Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expose target backlight levelAnthony Koo1-0/+12
[Why] DM may want to understand any backlight optimizations applied, so DM needs a way to query from the HW both the real current backlight, which may be value during transition. And also target backlight, which may be after some backlight optimizations applied. [How] Add interface to query current and target backlight levels Target level may indicate backlight level after backlight optimization and reductions are applied. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Expand dc to use 16.16 bit backlightAnthony Koo1-54/+38
[Why] We want to increase precision for backlight setting. But DC interface takes 8 bit backlight level value only. [How] DMCU already takes 16 bit backlight level. Expand the DC interface to take 16.16 bit value. Max 32 bit backlight value (0xFFFF) will represent max backlight (100%) Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-19drm/amd/display: get rid of 32.32 unsigned fixed pointDmytro Laktyushkin1-1/+1
32.32 is redundant, 31.32 does everything we use 32.32 for Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-05drm/amd/display: define DC_LOGGER for loggerBhawanpreet Lakha1-2/+3
Created a DC_LOGGER define. This is used to pass the logger into the macros. Anywhere we need to use the logger we need to define DC_LOGGER Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-05drm/amd/display: Use MACROS instead of dm_loggerBhawanpreet Lakha1-1/+1
Created MACROS for all log levels. Also Replaced usage of dm_logger_write to the defined MACROS Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: BL setting save/restoreCharlene Liu1-0/+9
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-20drm/amd/display: Fix check for whether dmcu fw is runningAnthony Koo1-14/+4
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: DMCU and ABM maintenance and refactorAnthony Koo1-19/+13
Remove some globals that should really be per block state. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-28drm/amd/display: Use kernel alloc/freeHarry Wentland1-2/+2
Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: use some sensible time outTony Cheng1-5/+6
40s time out is not sensible. also make all udelay poll happen more frequently since CPU is busy anyways Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Disable ABM when eDP is disabledAmy Zhang1-0/+21
- Add immediate ABM disable when eDP is disabled - Fix purple screen when ABM is mistakenly enabled on non eDP display Signed-off-by: Amy Zhang <Amy.Zhang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Implement support for backlight optimizationAnthony Koo1-2/+11
- Add functionality to get real hw backlight level as opposed to user level, meaning the level that takes into account backlight ramping over time and backlight reduction due to Varibright - Add backlight optimization which allows for a second OS state that is able to control ABM Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Don't call PSR func if DMCU is offHarry Wentland1-8/+15
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Fix warnings in DCHarry Wentland1-1/+0
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Fix 64-bit divisionHarry Wentland1-1/+1
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: Move backlight from encoder to ABMAnthony Koo1-15/+249
Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-27drm/amd/display: DMCU Compile and LoadAnthony Koo1-0/+214
Signed-off-by: Anthony Koo <anthony.koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-11 10:15:43 +0300