summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2011-08-23drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim1-0/+10
HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs1-4/+6
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs1-1/+1
Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz1-1/+3
ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Make vramlimit parameter actually work.Michel Dänzer1-0/+2
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer1-6/+18
Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer1-3/+7
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook1-0/+23
Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-20Merge branch 'for-linus' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
2011-08-19drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes2-0/+8
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-16Merge branch 'drm-intel-fixes' of ↵Linus Torvalds11-116/+264
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Cannot set clock gating under UMS drm/i915: Can't do accurate vblank timestamps with UMS Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support. drm/i915: split out PCH refclk update code drm/i915: show interrupt info on IVB drm/i915: Remove unused 'reg' argument to dp_pipe_enabled drm/i915: Fix PCH port pipe select in CPT disable paths drm/i915: Leave LVDS registers unlocked drm/i915: Wait for LVDS panel power sequence
2011-08-15drm/i915: Cannot set clock gating under UMSKeith Packard1-1/+2
The clock gating functions are only assigned under KMS, so don't try to call them under UMS. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15drm/i915: Can't do accurate vblank timestamps with UMSKeith Packard1-2/+4
Disable this feature when KMS is not running by setting the driver->get_vblank_timestamp function pointer to NULL. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Justin P. Mattock <justinmattock@gmail.com>
2011-08-15Not all systems expose a firmware or platform mechanism for changing the ↵Matthew Garrett6-3/+89
backlight intensity on i915, so add native driver support. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Airlie <airlied@linux.ie> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> Tested-by: Michel Alexandre Salim <salimma@fedoraproject.org> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-15drm/radeon/kms: don't try to be smart in the hpd handlerAlex Deucher3-8/+19
Attempting to try and turn off disconnected display hw in the hotput handler lead to more problems than it helped. For now just register an event and only attempt the do something interesting with DP. Other connectors are just too problematic: - Some systems have an HPD pin assigned to LVDS, but it's rarely if ever connected properly and we don't really care about hpd events on LVDS anyway since it's always connected. - The HPD pin is wired up correctly for eDP, but we don't really have to do anything since the events since it's always connected. - Some HPD pins fire more than once when you connect/disconnect - etc. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39882 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon: re-POST the asic on Apple hardware when booted via EFIMatthew Garrett1-0/+4
At least some Apples program the GPU into a state that wedges the engine once userspace starts trying to perform accelerated operations. Executing the Atom init scripts gets the hardware back into a working state. The same hardware works fine when booted via BIOS emulation, so let's just execute the init scripts on Apples when we're using EFI. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon: Allow panel preferred EDID to override BIOS native modeMatthew Garrett1-2/+11
We have two sources of information about panel capabilities on mobile radeon - the BIOS, which gives us a native mode, and the panel's preferred mode. In theory these two will always match, but there's some corner cases where the BIOS hasn't been fully initialised and so the native mode in it ends up with default values. However, if we get a panel with reasonable EDID, it's probably the case that the panel's preferred mode does actually represent the panel capabilities. This patch handles that case by replacing the native mode with the panel's preferred mode if the resolutions don't match. Systems without a valid internal panel EDID will still use the BIOS native mode. Signed-off-by: Matthew Garrett <mjg@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: make some watermark messages debug onlyAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: fix regression is handling >2 heads on cedar/caicosAlex Deucher1-0/+3
Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-12drm/radeon/kms: don't enable connectors that are off in the hotplug handlerAlex Deucher1-0/+4
If we get a hotplug event on an connector that is off, don't attempt to turn it on or off, it should already be off. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728228 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-09drm/i915: split out PCH refclk update codeJesse Barnes1-43/+76
We ought to be calling this from our DPMS routines as well as global state may change and we need to enable/disable clocks. So split out the code in preparation for further changes. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-09drm/i915: show interrupt info on IVBJesse Barnes1-1/+1
IVB uses the same interrupt reg layout as SNB, so add an IS_GEN7 to the interrupt debugfs file. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-09drm/i915: Remove unused 'reg' argument to dp_pipe_enabledKeith Packard1-4/+4
Just an extra parameter which isn't actually needed. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-09drm/i915: Fix PCH port pipe select in CPT disable pathsKeith Packard2-15/+58
CPT pipe select is different from previous generations (using two bits instead of one). All of the paths from intel_disable_pch_ports were not making this distinction. Mode setting with pipe A turned off would then also force all outputs on pipe B to get turned off as the disable code would mistakenly decide that all of these outputs were on pipe A and turn them off. This is an extension of the CPT DP disable fix (why didn't I fix this then?) Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-09drm/i915: Leave LVDS registers unlockedKeith Packard1-35/+16
There's no reason to relock them; it just makes operations more complex. This fixes DPMS where the panel registers were locked making the disable not work. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-09drm/i915: Wait for LVDS panel power sequenceKeith Packard1-12/+14
During mode setting, check to make sure the panel power sequencing has completed before doing further operations on the device. This uncovered errors with DPMS not turning the device off as it was left locked. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-05Revert "drm/i915: Try enabling RC6 by default (again)"Dave Airlie1-1/+1
This reverts commit 4e20fa65a3ea789510eed1a15deb9e8aab2b8202. Francesco Allertsen still has a broken configuration. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for ECS A740GM-M DVI-D ConnectorThomas Reim1-0/+9
ECS A740GM-M with ATI RADEON 2100 sends data to i2c bus for a DVI connector that is not implemented/existent on the board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Asus ECS A740GM-M board BugLink: http://bugs.launchpad.net/bugs/810926 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Log Subsystem Vendor and Device InformationThomas Reim1-2/+3
Log PCI subsystem vendor and subsystem device ID in addition to PCI vendor and device ID during kernel mode initialisation. This helps to better identify radeon devices of third-party vendors, e. g. for bug analysis. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC ↵Thomas Reim4-12/+80
Lines (here: Asus M2A-VM HDMI) Some integrated ATI Radeon chipset implementations with add-on HDMI card (e. g. Asus M2A-VM HDMI) indicate the availability of a DDC even when the add-on card is not plugged in or HDMI is disabled in BIOS setup. In this case, drm_get_edid() and drm_edid_block_valid() periodically dump data and kernel errors into system log files and onto terminals. For these connectors DDC probing is extended by a check for a correct EDID header. Only in case a valid EDID header is also found, the (HDMI or DVI) connector will be used by the Radeon driver. This prevents the kernel driver from useless flooding of logs and terminal sessions with EDID dumps and error messages. This patch adds a flag 'requires_extended_probe' to the radeon_connector structure. In function radeon_connector_needs_extended_probe() this flag can be set on a chipset family/vendor/connector type specific basis. In addition, function radeon_ddc_probe() has been adapted to perform extended DDC probing if required by the connector's flag. Requires function drm_edid_header_is_valid() in DRM module provided by [PATCH] drm: Separate EDID Header Check from EDID Block Check. Tested for kernel 2.6.35, 2.6.38 and 3.0 on Asus M2A-VM HDMI board BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=668196 BugLink: http://bugs.launchpad.net/bugs/7228066 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Separate EDID Header Check from EDID Block CheckThomas Reim1-6/+18
Provides function drm_edid_header_is_valid() for EDID header check and replaces EDID header check part of function drm_edid_block_valid() by a call of drm_edid_header_is_valid(). This is a prerequisite to extend DDC probing, e. g. in function radeon_ddc_probe() for Radeon devices, by a central EDID header check. Tested for kernel 2.6.35, 2.6.38 and 3.0 Cc: <stable@kernel.org> Signed-off-by: Thomas Reim <reimth@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Acked-by: Stephen Michaels <Stephen.Micheals@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Add NULL check about irq functionsJoonyoung Shim1-8/+15
The struct drm_driver has some function pointers for irq. They are gpu specific and some functions aren't essential things. This can prevents creation of unnecessary dummy function for irq. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm: Fix irq install error handlingJoonyoung Shim1-0/+3
The registered irq should be unregistered by free_irq() if irq_postinstall() returns the error after request_irq() is called successfully. [airlied: add vga switcheroo disable] Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: fix potential NULL dereference in drivers/gpu/drm/radeon/atom.cBojan Prtvar1-0/+3
kzalloc() can return NULL, so I added check for it Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: clean reg header filesFernando Luis Vázquez Cao1-0/+1
Reg header files are generated so they are not cleaned automagically. They need to be added to the clean-files list. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/debugfs: Initialise empty variableEmil Velikov1-1/+3
[airlied: move char declaration] Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04Merge branch 'drm-intel-next' of ↵Dave Airlie16-104/+591
ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-fixes * 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (42 commits) drm/i915: allow cache sharing policy control drm/i915/hdmi: HDMI source product description infoframe support drm/i915/hdmi: split infoframe setting from infoframe type code drm: track CEA version number if present drm/i915: Try enabling RC6 by default (again) Revert "drm/i915/dp: Zero the DPCD data before connection probe" drm/i915/dp: wait for previous AUX channel activity to clear drm/i915: don't use uninitialized EDID bpc values when picking pipe bpp drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend drm/i915: apply phase pointer override on SNB+ too drm/i915: Add quirk to disable SSC on Sony Vaio Y2 drm/i915: provide more error output when mode sets fail drm/i915: add GPU max frequency control file i915: add Dell OptiPlex FX170 to intel_no_lvds drm/i915: Ignore GPU wedged errors while pinning scanout buffers drm/i915/hdmi: send AVI info frames on ILK+ as well drm/i915: fix CB tuning check for ILK+ drm/i915: Flush other plane register writes drm/i915: flush plane control changes on ILK+ as well drm/i915: apply timing generator bug workaround on CPT and PPT ...
2011-08-04drm/radeon/kms: add thermal chip quirk for asus 9600xtAlex Deucher1-1/+20
The board has an lm63 compatible thermal chip, but no thermal chip entry in the vbios tables. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39513 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon: off by one in check_reg() functionsDan Carpenter2-3/+2
This off by one range check was copy and pasted a couple places. It's not really harmful, but we should fix it anyway. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/radeon/kms: fix version comment due to merge timingAlex Deucher1-2/+2
Compute cs support was actually added in 2.11.0 rather than 2.10.0, but the patch was written prior. Update comment to match. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-04drm/i915: allow cache sharing policy controlJesse Barnes2-0/+107
Expose the SNB+ cache sharing policy register in debugfs. The new file, i915_cache_sharing, has 4 values, 0-3, with 0 being "max uncore resources" and 3 being the minimum. Exposing this control should make benchmarking easier and help us choose a good default. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-04drm/i915/hdmi: HDMI source product description infoframe supportJesse Barnes2-0/+37
Set an SPD infoframe if the sink supports it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-04drm/i915/hdmi: split infoframe setting from infoframe type codeJesse Barnes3-46/+106
This makes it easier to add support for other infoframes (e.g. SPD, vendor specific). Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-04drm: track CEA version number if presentJesse Barnes1-0/+9
Drivers need to know the CEA version number in addition to other display info (like whether the display is an HDMI sink) before enabling certain features. So track the CEA version number in the display info structure. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03drm/i915: Try enabling RC6 by default (again)Keith Packard1-1/+1
Jesse Barnes and I found a couple of issues where incorrect mode setting would cause problems with RC6 enabled. We're hopeful that fixing those will resolve the outstanding issues with a few machines that had trouble before 3.0 with rc6. Cc: Pekka Enberg <penberg@kernel.org> Cc: Francesco Allertsen <fallertsen@gmail.com> Cc: Ted Phelps <phelps@gnusto.com> Cc: Gu Rui <chaos.proton@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38332 Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-03Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard1-4/+11
2011-08-03Revert "drm/i915/dp: Zero the DPCD data before connection probe"Keith Packard1-1/+0
This reverts commit 97cdd7101079adc3c626d159c62d43de949516c8. Clearing the dpcd data means that if the fetch fails, any previous data will be lost. On eDP, this is no fun as we only fetch dpcd at init time, so the memset will destroy that the next time through.
2011-08-02drm/i915/dp: wait for previous AUX channel activity to clearJesse Barnes1-3/+11
Before initiating a new read or write on the DP AUX channel, wait for any outstanding activity to complete. This may happen during normal retry behavior. If the wait fails (i.e. after 1ms the AUX channel is still busy) dump a backtrace to make the caller easier to spot. v2: use msleep instead, and timeout after 3ms (only ever saw 1 retry with msleep in testing) v3: fix backtrace check to trigger if the 3ms wait times out Fixes https://bugs.freedesktop.org/show_bug.cgi?id=38136. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-02drm/i915: don't use uninitialized EDID bpc values when picking pipe bppJesse Barnes1-2/+5
The EDID parser will zero out the bpc value, and the driver needs to handle that case. In our picker, we'll just ignore 0 values as far as bpp picking goes. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=39323. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-30Merge branch 'drm-intel-fixes' into drm-intel-nextKeith Packard7-2/+193
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-03 01:12:41 +0300