summaryrefslogtreecommitdiff
path: root/drivers/hwmon/hih6130.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-23hwmon: use simple i2c probe functionStephen Kitt1-3/+2
Many hwmon drivers don't use the id information provided by the old i2c probe function, and the remainder can easily be adapted to the new form ("probe_new") by calling i2c_match_id explicitly. This avoids scanning the identifier tables during probes. Drivers which didn't use the id are converted as-is; drivers which did are modified as follows: * if the information in i2c_client is sufficient, that's used instead (client->name); * anything else is handled by calling i2c_match_id() with the same level of error-handling (if any) as before. A few drivers aren't included in this patch because they have a different set of maintainers. They will be covered by other patches. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16hwmon: (hih6130) Fix build warningGuenter Roeck1-1/+1
If CONFIG_OF is not enabled, the following build warning is observed. drivers/hwmon/hih6130.c:255:34: warning: ‘hih6130_of_match’ defined but not used Mark hih6130_of_match as __maybe_unused to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-19hwmon: (hih6130) Use permission specific SENSOR[_DEVICE]_ATTR variantsGuenter Roeck1-6/+4
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chance of inconsistencies. Also replace any remaining S_<PERMS> in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-19hwmon: (hih6130) add dtb compatibility tablesAndreas Kemnade1-1/+10
This allows the hih6130 to be used in devicetree files and auto-probed that way. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-03hwmon: (hih6130) Fix documentation of struct hih6130Guenter Roeck1-1/+1
Sparse reports: drivers/hwmon/hih6130.c:56: warning: No description found for parameter 'client' drivers/hwmon/hih6130.c:56: warning: Excess struct member 'hwmon_dev' description in 'hih6130' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-06hwmon: (hih6130) Fix missing hih6130->write_length settingAxel Lin1-0/+3
The hih6130->write_length setting was accidently removed by commit ebc6b9383f3e "hwmon: (hih6130) Convert to devm_hwmon_device_register_with_groups", fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-08-04hwmon: (hih6130) Convert to devm_hwmon_device_register_with_groupsAxel Lin1-65/+23
Use ATTRIBUTE_GROUPS macro and devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-12-12hwmon: HIH-6130: Support I2C bus drivers without I2C_FUNC_SMBUS_QUICKJosé Miguel Gonçalves1-2/+14
Some I2C bus drivers do not allow zero-length data transfers which are required to start a measurement with the HIH6130/1 sensor. Nevertheless, we can overcome this limitation by writing a zero dummy byte. This byte is ignored by the sensor and was verified to be working with the OMAP I2C bus driver in a BeagleBone board. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> [Guenter Roeck: Simplified complexity of write_length initialization] Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-11-28hwmon: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-10hwmon: Add missing inclusions of <linux/jiffies.h>Jean Delvare1-0/+1
Many hwmon drivers use jiffies but omit the inclusion of the header file. Fix that, and also fix one driver which was including the header file but didn't need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Luca Tettamanti <kronos.it@gmail.com> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz>
2012-07-22hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor ↵Iain Paton1-0/+293
driver This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor. The driver is based on the existing Sensiron sht21 driver with the necessary changes to the probe, update_measurements and conversion functions necessary to use the Honeywell sensors. There's no difference between the 6130 & 6131 other than the 6131 having an external condensation filter attached. Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>