summaryrefslogtreecommitdiff
path: root/drivers/hwmon/sht15.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17docs: hwmon: Add an index file and rename docs to *.rstMauro Carvalho Chehab1-1/+1
Now that all files were converted to ReST format, rename them and add an index. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-02-19hwmon: (sht15) Use permission specific SENSOR[_DEVICE]_ATTR variantsGuenter Roeck1-20/+14
Use SENSOR[_DEVICE]_ATTR[_2]_{RO,RW,WO} to simplify the source code, to improve readability, and to reduce the chance of inconsistencies. Also replace any remaining S_<PERMS> in the driver with octal values. The conversion was done automatically with coccinelle. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches/hwmon/. This patch does not introduce functional changes. It was verified by compiling the old and new files and comparing text and data sizes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-10-11hwmon: (sht15) Switch to SPDX identifierFabio Estevam1-4/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-01-03hwmon: (sht15) Fix parameter documentation of sht15_crc8()Guenter Roeck1-0/+1
Sparse reports: drivers/hwmon/sht15.c:188: warning: No description found for parameter 'len' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-30hwmon: (sht15) remove redundant check on status and send of status valueColin Ian King1-8/+0
A previous commit removed bit or'ing into to the integer status so now status is now always zero. This means that the non-zero check on status and the sht15_send_status call will never occur; it is deadcode. Clean this up by removing the dead code. Detected by: CoverityScan CID#1456835 ("Logically dead code") Fixes: aa7ab80c578c ("hwmon: (sht15) Root out platform data") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-10-30hwmon: (sht15) Root out platform dataLinus Walleij1-113/+54
After finding out there are active users of this sensor I noticed: - It has a single PXA27x board file using the platform data - The platform data is only used to carry two GPIO pins, all other fields are unused - The driver does not use GPIO descriptors but the legacy GPIO API I saw we can swiftly fix this by: - Killing off the platform data entirely - Define a GPIO descriptor lookup table in the board file - Use the standard devm_gpiod_get() to grab the GPIO descriptors from either the device tree or the board file table. This compiles, but needs testing. Cc: arm@kernel.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Davide Hug <d@videhug.ch> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-16hwmon: (sht15) Add device tree supportMarco Franchi1-4/+60
Allow the driver to work with device tree support. Based on initial patch submission from Peter Fox. Tested on a imx7d-sdb board connected to a SHT15 board via Mikro Bus. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-01-02hwmon: (sht15) use permission-specific DEVICE_ATTR variantsJulia Lawall1-2/+2
Use DEVICE_ATTR_RO for read-only attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The conversion was done automatically using coccinelle. It was validated by compiling both the old and the new source code and comparing its text, data, and bss size. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-11hwmon:change sht15_reverse()yalin wang1-16/+4
This change sht15_reverse() to be generic bitrev8(). Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-01hwmon: (sht15) Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-10-20hwmon: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-09-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for HTU21D (humidity sensor) - add support for Fam16h (Kabini) to k10temp - add support for NCT6102D/6106D and NCT6791D to nct6775 driver - add support for ADS1115 to ads1015 driver - add support for hibernate to w83627ehf and nct6775 drivers - some minor cleanups * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (htu21) Add Measurement Specialties HTU21D support hwmon: Change my email address. hwmon: (k10temp) Add support for Fam16h (Kabini) hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0 hwmon: (ads1015) Add support for ADS1115 hwmon: (w83627ehf) Add support for hibernate hwmon: (nct6775) Add support for hibernate hwmon: use dev_get_platdata() hwmon: (nct6775) Fix size of data->temp array hwmon: (nct6775) Avoid using device platform data outside probe function hwmon: (nct6775) Add support for NCT6791D hwmon: (nct6775) Add support for beep attributes hwmon: (nct6775) Add support for critical low/high temperature limits on NCT6106 hwmon: (nct6775) Add support for NCT6102D/6106D hwmon: (nct6775) Support two SuperIO chips in the same system hwmon: (nct6775) Allocate attributes dynamically from templates hwmon: (coretemp) Atom CPUs don't support TjMax; no warning needed
2013-08-19hwmon: (sht15) Use devm_regulator_get_optional()Mark Brown1-1/+1
Since the sht15 driver supports operation without an external vref regulator the driver should use the new devm_regulator_get_optional() to indicate that a stub regulator should not be provided. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2013-08-12hwmon: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-04hwmon: (sht15) Check return value of regulator_enable()Mark Brown1-1/+7
Not having power is a pretty serious error so check that we are able to enable the supply and error out if we can't. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org #3.8+; 3.0+ will need manual backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (sht15) check GPIO directionsVivien Didelot1-47/+88
Without this patch, the SHT15 driver may fail silently with a non-bidirectional data line and/or an input-only clock line. This patch checks the return value of gpio_direction_* function calls and returns the error code (if any) to the caller. If an error occurs in the read work function (work_funct_t), we wake the queue up directly without updating the data->state flag, to notice the waiter of the I/O error. The patch also makes minor cleanups: s/error_ret/unlock for some labels and uses devm_gpio_request_one() for the clock line. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-26hwmon: (sht15) avoid CamelCaseVivien Didelot1-11/+11
This patch renames the supply_uV* variables to supply_uv* to avoid CamelCase as warned by the checkpatch.pl script. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-11-28hwmon: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28hwmon: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-24hwmon: (sht15) move header to linux/platform_data/Vivien Didelot1-1/+1
This patch moves the sht15.h header from include/linux to include/linux/platform_data, and update existing support (stargate2 platform) accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-24hwmon: (sht15) remove multiple driver registrationVivien Didelot1-71/+23
Declare an array of platform_device_id, instead of registering a driver for each supported chip. This makes the code cleaner. Also add a module description. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-24hwmon: (sht15) Convert to use devm_ functionsGuenter Roeck1-38/+20
Convert to use devm_ functions to reduce code size and simplify the code. Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2012-03-19hwmon: (sht15) fix checkpatch issuesFrans Meulenbroeks1-1/+1
fixed: WARNING: line over 80 characters #809: FILE: sht15.c:809: + /* If still not occurred or another handler has been scheduled */ Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-29hwmon: (sht15) fix bad error codeVivien Didelot1-1/+2
When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: replaced strict_str* with kstr*Frans Meulenbroeks1-1/+1
replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25hwmon: (sht15) Correct a comment mistakeVivien Didelot1-1/+1
sht15_store_heater() is called on _write_ access to heater_enable. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-19hwmon: (sht15) add support for CRC validationJerome Oufella1-19/+173
The sht15 sensor allows validating exchanges to and from the device using a crc8 function. An utility function to reverse a byte has also been added. Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19hwmon: (sht15) add support for the status registerVivien Didelot1-33/+214
* Add support for: - Heater. - End of battery notice. - Ability not to reload from OTP. - Low resolution (12bit temp, 8bit humidity). * Add an utility function to read individual bytes from the device. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19hwmon: (sht15) clean-up the probe functionVivien Didelot1-8/+46
* Move the creation of sysfs attributes after the end of the initialization, and remove them in the error path. * Release regulator in the error path. * Add a soft reset command (need to wait 11ms before next command). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19hwmon: (sht15) general code clean-upVivien Didelot1-115/+153
* Add a documentation file for the device. * Respect a bit more the kernel-doc syntax. * Rename some variables for clarity. * Use bool type for flags. * Use an enum for states (actions being done). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-31Fix common misspellingsLucas De Marchi1-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-21hwmon: (sht15) Fix integer overflow in humidity calculationVivien Didelot1-2/+2
An integer overflow occurs in the calculation of RHlinear when the relative humidity is greater than around 30%. The consequence is a subtle (but noticeable) error in the resulting humidity measurement. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Cc: Jonathan Cameron <jic23@cam.ac.uk>
2011-03-21hwmon: (sht15) Spelling fixJustin P. Mattock1-1/+1
Remove one too many "n" in a word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2010-04-14hwmon: (sht15) Properly handle the case CONFIG_REGULATOR=nJean Delvare1-1/+6
When CONFIG_REGULATOR isn't set, regulator_get_voltage() returns 0. Properly handle this case by not trusting the value. Reported-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-04-14hwmon: (sht15) Fix sht15_calc_temp interpolation functionJerome Oufella1-3/+3
I discovered two issues. First the previous sht15_calc_temp() loop did not iterate through the temppoints array since the (data->supply_uV > temppoints[i - 1].vdd) test is always true in this direction. Also the two-points linear interpolation function was returning biased values due to a stray division by 1000 which shouldn't be there. [JD: Also change the default value for d1 from 0 to something saner.] Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-16hwmon: (sht15) Off-by-one error in array index + incorrect constantsJonathan Cameron1-3/+3
Fix an off-by-one error in array index + incorrect constants. Signed-off-by: Christoph Walser <walser@tik.ee.ethz.ch> Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-10-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (s3c-hwmon) Disable build for S3C64xx MAINTAINERS: Fix Riku Voipio's address hwmon: (asus_atk0110) Enable the EC hwmon: (asus_atk0110) Refactor the code hwmon: (sht15) Fix spurious section mismatch warning
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan1-0/+1
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-10-09hwmon: (sht15) Fix spurious section mismatch warningRakib Mullick1-1/+6
Fix spurious section mismatch warnings, caused due to reference from variable sht_drivers to __devinit/__devexit functions sht15_probe()/remove(). We were warned by the following warnings: LD drivers/hwmon/built-in.o WARNING: drivers/hwmon/built-in.o(.data+0x264a0): Section mismatch in reference from the variable sht_drivers to the function .devinit.text:sht15_probe() The variable sht_drivers references the function __devinit sht15_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x264a4): Section mismatch in reference from the variable sht_drivers to the function .devexit.text:sht15_remove() The variable sht_drivers references the function __devexit sht15_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x264f0): Section mismatch in reference from the variable sht_drivers to the function .devinit.text:sht15_probe() The variable sht_drivers references the function __devinit sht15_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x264f4): Section mismatch in reference from the variable sht_drivers to the function .devexit.text:sht15_remove() The variable sht_drivers references the function __devexit sht15_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x26540): Section mismatch in reference from the variable sht_drivers to the function .devinit.text:sht15_probe() The variable sht_drivers references the function __devinit sht15_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x26544): Section mismatch in reference from the variable sht_drivers to the function .devexit.text:sht15_remove() The variable sht_drivers references the function __devexit sht15_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: drivers/hwmon/built-in.o(.data+0x26590): Section mismatch in reference from the variable sht_drivers to the function .devinit.text:sht15_probe() The variable sht_drivers references the function __devinit sht15_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-09-22hwmon: fix freeing of gpio_data and irqRoel Kluin1-2/+4
If already requested, gpio_data and irq should be freed in the case of an error. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-11hwmon: (sht15) Remove unnecessary semicolonJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15hwmon: Fix more __devexit_p glitchesJean Delvare1-5/+5
Make sure __devexit and devexit_p() match in all hwmon drivers. Suggested by a similar fix from Mike Frysinger. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
2009-04-14hwmon: sht15 humidity sensor driverJonathan Cameron1-0/+692
Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>