summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-06i2c/scx200_*: Replace printks with pr_<level>sJim Cromie2-21/+18
Replace printks with pr_<level>s, add pr_fmt()s to replace NAMEs Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Reviewed-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-06i2c: Make I2C available on UMLPeter Huewe2-14/+17
Remove the global dependency of the I2C subsystem on HAS_IOMEM and move the dependency to the i2c/busses submenu, with an exception for i2c-stub. The generic I2C part does not need to have HAS_IOMEM set and thus now becomes available in UML, so the I2C subsystem can now be used, e.g. by the i2c-stub driver, for development of I2C device drivers. [JD: Some adjustments.] [Heiko Carstens: Keep I2C disabled on S390.] Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-06i2c: Convert struct i2c_msg initialization to C99 formatShubhrajyoti D1-3/+13
Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-06i2c-smbus: Convert kzalloc to devm_kzallocJulia Lawall1-7/+4
Converting kzalloc to devm_kzalloc simplifies the code and ensures that the result, alert, is freed after the irq allocated by the subsequent devm_request_irq. This in turn ensures that when an interrupt can be triggered, the alert structure is still available. The problem of a free after a devm_request_irq was found using the following semantic match (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2,x,a,b,c,d; identifier free; position p1,p2; @@ devm_request_irq@p1(e1,e2,...,x) ... when any when != e2 = a when != x = b if (...) { ... when != e2 = c when != x = d free@p2(...,x,...); ... return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-10-06i2c-mux: Add support for device auto-detectionJean Delvare5-7/+33
Let I2C bus segments behind multiplexers have a class. This allows for device auto-detection on these segments. As long as parent segments don't share the same class, it should be fine. I implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I left i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I don't know if this feature makes sense for the use cases of these drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: David Daney <david.daney@cavium.com> Cc: Michael Lawnick <ml.lawnick@gmx.de> Cc: Rodolfo Giometti <giometti@linux.it>
2012-10-05idr: rename MAX_LEVEL to MAX_IDR_LEVELFengguang Wu1-1/+1
To avoid name conflicts: drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined While at it, also make the other names more consistent and add parentheses. [akpm@linux-foundation.org: repair fallout] [sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change] Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: walter harms <wharms@bfs.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-38/+92
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-10-02Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-61/+62
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson4-4/+4
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22Merge branch 'v3.7-samsung-fixes-1' of ↵Olof Johansson8-36/+83
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/fixes-non-critical A few non-critical fixes/cleanups for samsung platforms. * 'v3.7-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: Add missing variable declaration in s3c64xx_spi1_set_platdata() ARM: S3C24XX: removes unnecessary semicolon ARM: S3C24xx: delete double assignment ARM: EXYNOS: fix address for EXYNOS4 MDMA1 ARM: EXYNOS: fixed SYSMMU setup definition to mate parameter name + sync to 3.6-rc6
2012-09-21i2c-scmi: convert to module_acpi_driver()Mika Westerberg1-13/+1
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson8-36/+83
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-09-15Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds3-32/+40
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "The last bunch of (typical) i2c-embedded driver fixes for 3.6. Also update the MAINTAINERS file to point to my tree since people keep asking where to find their patches." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: algo: pca: Fix mode selection for PCA9665 MAINTAINERS: fix tree for current i2c-embedded development i2c: mxs: correctly setup speed for non devicetree i2c: pnx: Fix read transactions of >= 2 bytes i2c: pnx: Fix bit definitions
2012-09-14i2c: mpc: Wait for STOP to hit the busJoakim Tjernlund1-1/+17
mpc_i2c_stop() only initiates STOP but does not wait for it to hit the I2C bus. This is a problem when using I2C devices which uses fairly long clock stretching just before STOP if you also have an i2c-mux which may switch to another bus before STOP has been processed. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-14i2c: algo: pca: Fix mode selection for PCA9665Thomas Kavanagh1-3/+3
The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-14i2c: davinci: preparation for switch to common clock frameworkMurali Karicheri1-5/+5
As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-14ARM: w90x900: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the w90x900 include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-09-14ARM: imx: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the imx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-09-13i2c: tegra: dynamically control fast clkLaxman Dewangan1-7/+28
Tegra I2C driver enables the fast clock during initialization and does not disable till driver removed. Enable this clock before transfer and disable after transfer done. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20Laxman Dewangan1-14/+47
Tegra20 i2c controller does not support the continue transfer which implements the I2C_M_NOSTART functionality of i2c protocol mangling. Removing the I2C_M_NOSTART functionality support for Tegra20. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13i2c: tegra: pass proper name for getting clockLaxman Dewangan1-23/+23
Tegra's i2c controller require two clock sources named as div_clk and fast_clk. This change make sure that driver pass the correct clock's name when it acquires clock handle. Also change the variable name to reflect the correct clock handles. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson2-7/+8
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-12i2c: mxs: correctly setup speed for non devicetreeWolfram Sang1-7/+6
Commit cd4f2d4 (i2c: mxs: Set I2C timing registers for mxs-i2c) only covered the case for devicetree and made platform_data based boards bail out with -EINVAL. Correctly support the latter one, too. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix read transactions of >= 2 bytesRoland Stigge1-20/+28
On transactions with n>=2 bytes, the controller actually wrongly clocks in n+1 bytes. This is caused by the (wrong) assumption that RFE in the Status Register is 1 iff there is no byte already ordered (via a dummy TX byte). This lead to the implementation of synchronized byte ordering, e.g.: Dummy-TX - RX - Dummy-TX - RX - ... But since RFE actually stays high after some Dummy-TX, it rather looks like: Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX) The last RX byte is clocked in by the bus controller, but ignored by the kernel when filling the userspace buffer. This patch fixes the issue by asking for RX via Dummy-TX asynchronously. Introducing a separate counter for TX bytes. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: pnx: Fix bit definitionsRoland Stigge1-2/+3
The I2C Control Register bits RFDAIE and RFFIE were mixed up. In addition to this fix, this patch adds the missing bit DRSIE for completeness. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12omap-i2c: fix incorrect log message when using a device treeFlorian Vaussard1-3/+3
When booting using a device tree, the adapter number is dynamically assigned after the log message is sent. This patch modifies the log message to get a correct adapter id. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: sanitize exit pathFelipe Balbi1-13/+13
move the goto out label one line down, so that it can be used when stat is read as zero. All other exits, can be done with a break statement. While at that, also break out as soon as we complete draining IRQ, since at that time we know we transferred everything there was to be transferred. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: switch over to autosuspend APIFelipe Balbi1-2/+10
this helps us reduce unnecessary pm transitions in case we have another i2c message starting soon. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: remove unnecessary pm_runtime_suspended checkFelipe Balbi1-3/+0
before starting any messages we call pm_runtime_get_sync() which will make sure that by the time we program a transfer and our IRQ handler gets called, we're not suspended anymore. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: switch to threaded IRQ supportFelipe Balbi1-6/+37
for OMAP2, we can easily switch over to threaded IRQs on the I2C driver. This will allow us to spend less time in hardirq context. Signed-off-by: Felipe Balbi <balbi@ti.com> [Trivial formating changes] Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: remove redundant status readShubhrajyoti D1-2/+0
Currently omap_i2c_ack_stat doesn't use the stat variable. After the read of the I2C_STAT_REG it is not used. Remove the redundant read of the status register. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: get rid of the "complete" labelFelipe Balbi1-3/+13
we can ack stat and complete the command from the errata handling itself. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: resize fifos before each messageFelipe Balbi1-32/+51
This patch will try to avoid the usage of draining feature by reconfiguring the FIFO the start condition of each message based on the message's size. By doing that, we will be better utilizing the FIFO when doing big transfers. While at that also drop the now unneeded check for dev->buf_len as we always know the amount of data to be transmitted. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: simplify IRQ exit pathFelipe Balbi1-12/+8
instead of having multiple return points, use a goto statement to make that clearer. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: always return IRQ_HANDLEDFelipe Balbi1-1/+1
Always return IRQ_HANDLED otherwise we could get our IRQ line disabled due to many spurious IRQs. Signed-off-by: Felipe Balbi <balbi@ti.com> [Trivial changes to commitlogs] Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: simplify errata checkFelipe Balbi1-3/+1
omap_i2c_dev is allocated with kzalloc(), so we need not initialize b_hw to zero. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: bus: add a receiver flagFelipe Balbi1-0/+8
that way we can ignore TX IRQs while in receiver mode and ignore RX IRQs while in transmitter mode. Signed-off-by: Felipe Balbi <balbi@ti.com> [Remove unnecessary braces] Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: switch to platform_get_irq()Felipe Balbi1-5/+7
that's a nice helper from drivers core which will give us the exact IRQ number, instead of a pointer to an IRQ resource. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: ack IRQ in partsFelipe Balbi1-12/+16
According to flow diagrams on OMAP TRMs, we should ACK the IRQ as they happen. Signed-off-by: Felipe Balbi <balbi@ti.com> [Ack the stat OMAP_I2C_STAT_AL in case of arbitration lost] Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: switch over to do {} while loopFelipe Balbi1-6/+14
this will make sure that we execute at least once. No functional changes otherwise. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: re-factor receive/transmit data loopFelipe Balbi1-122/+82
re-factor the common parts to a separate function, so that code is easier to read and understand. No functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: improve i462 errata handlingFelipe Balbi1-13/+30
Make it not depend on ISR's local variables in order to make it easier to re-factor the transmit data loop. Also since we are waiting for XUDF(Transmitter underflow) just before writing data lets not flag the underflow. This is anyways going to go once we write the data. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: split out [XR]DR and [XR]RDYFelipe Balbi1-34/+92
While they do pretty much the same thing, there are a few peculiarities. Specially WRT erratas, it's best to split those out and re-factor the read/write loop to another function which both cases call. This last part will be done on another patch. While at that, also avoid an unncessary register read since dev->fifo_len will always contain the correct amount of data to be transferred. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: simplify omap_i2c_ack_stat()Felipe Balbi1-9/+10
stat & BIT(1) is the same as BIT(1), so let's simplify things a bit by removing "stat &" from all omap_i2c_ack_stat() calls. Code snippet (extremely simplified): if (stat & NACK) { ... omap_i2c_ack_stat(dev, stat & NACK); } if (stat & RDR) { ... omap_i2c_ack_stat(dev, stat & RDR); } and so on. The tricky place is only WRT errata handling, for example: if (*stat & (NACK | AL)) { omap_i2c_ack_stat(dev, *stat & (XRDY | XDR)); ... } but in this case, the errata says we must clear XRDY and XDR if that errata triggers, so if they just got enabled or not, it doesn't matter. Another tricky place is RDR | RRDY (likewise for XDR | XRDY): if (stat & (RDR | RRDY)) { ... omap_i2c_ack_stat(dev, stat & (RDR | RRDY)); } again here there will be no issues because those IRQs never fire simultaneously and one will only after after we have handled the previous, that's because the same FIFO is used anyway and we won't shift data into FIFO until we tell the IP "hey, I'm done with the FIFO, you can shift more data" Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com> [Added the explaination from the discurssion to the commit logs] Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: add blank linesFelipe Balbi1-0/+5
trivial patch to aid readability. No functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: decrease indentation level on data handlingFelipe Balbi1-32/+31
The patch intends to decrease the indentation level on the data handling by using the fact that else of if (dev->buf_len) is same as if (!dev->buf_len) if (dev->buf_len) { aaa; } else { bbb; break; } to if (!dev->buf_len) { bbb; break; } aaa; Hence no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-12i2c: omap: simplify num_bytes handlingFelipe Balbi1-4/+2
trivial patch, no functional changes If the fifo is disabled or fifo_size is 0 the num_bytes is set to 1. Else it is set to fifo_size or in case of a draining interrupt the remaining bytes in the buff stat. So the zero check is redundant and can be safely optimised. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by : Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-09 15:58:46 +0300