| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, if pd is null then we hit a null pointer derference
on accessing pd->pd_id. Instead of just printing an error message
we should also return -EINVAL immediately.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
and rename class version define to indicate SM rather than SMP or SMI
Signed-off-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Enable mlx5 based hardware to report packet pacing capabilities
from kernel to user space. Packet pacing allows to limit the rate to any
number between the maximum and minimum, based on user settings.
The capabilities are exposed to user space through query_device by uhw.
The following capabilities are reported:
1. The maximum and minimum rate limit in kbps supported by packet pacing.
2. Bitmap showing which QP types are supported by packet pacing operation.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.
This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This is a pre-step towards having mlx5 IB device also over Eth ports where
RoCE is not supported. We change the roce enable/disable and roce_lag
init/fini function names to have _eth instead of _roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Refactor the netdev notifier registration into a small helper function.
This is a pre-step towards having mlx5 IB device over an Ethernet port
which doesn't support RoCE. Also, renamed the de-registration helper
and the new helper as netdev notifier and not roce, to make it clear
this is not only used with roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.
Change the length type to be u64.
Fixes: 968e78dd9644 ('IB/mlx5: Enhance UMR support to allow partial page table update')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When enabling many VFs, the total amount of DMA mappings increase
significantly. This causes DMA allocations to take a lot of time
since they are serialized in the kernel.
As a result the driver enters into fatal condition due to
timeout and the system hangs. To recover from this we disable
MR cache for VFs.
PFs will still have a full cache and VFs cache can be manipulated
as usual after driver load.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Move the SRQ type assignment to be before actually using it
in create_srq_user() and in create_srq_kernel() functions.
Fixes: af1ba291c5e4 ('{net, IB}/mlx5: Refactor internal SRQ API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For non-special QPs, the port value becomes non-zero only at the
RESET-to-INIT transition. If the QP has not undergone that transition,
its port number value is still zero.
If such a QP is destroyed before being moved out of the RESET state,
subtracting one from the qp port number results in a negative value.
Using that negative value as an index into the qp1_proxy array
results in an out-of-bounds array reference.
Fix this by testing that the QP type is one that uses qp1_proxy before
using the port number. For special QPs of all types, the port number is
specified at QP creation time.
Fixes: 9433c188915c ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Advertise that create_ah and destroy_ah verbs are accessible from
uverbs interface.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Resolving a MAC address for a given IP address in userspace is inefficient.
This patch lets mlx5 user driver using the kernel driver to resolve the mac
and get the answer in the private section of the response.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
To make mlx5 user driver aware of whether kernel driver returns dmac
in user data response add a new flag that will be returned back to
user-space through alloc_ucontext.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add support to match packet fields which are tunneled,
i.e. support matching the header of the inner packet which is the result of
or bit operation of the original header and the IB_FLOW_SPEC_INNER type.
The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not
needed to be checked, because the IB core has this check already.
Signed-off-by: Moses Reuben <mosesr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add support to receive specific Vxlan packet in ConnectX-4.
Signed-off-by: Moses Reuben <mosesr@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
CQE compressing reduces PCI overhead by coalescing and compressing
multiple CQEs into a single merged CQE. Successful compressing
improves message rate especially for small packet traffic.
CQE compressing is supported for all 64B CQE formats (with certain
limitations) generated by RQ/Responder or by SQ/Requestor.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The capabilities include:
- Max number of compressed and aggregated CQEs in a single session,
while zero means unsupported.
- For Responder, there are two formats of mini CQE: mini CQE with Rx
hash and mini CQE with checksum. They're mutual exclusive.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The capabilities whether hardware support multi packet WQE or not is
exposed to user space through query_device by uhw.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Before reading GRH attributes, need to make sure AH contains GRH,
and in addition, initialize GID type.
Fixes: dbf727de7440 ('IB/core: Use GID table in AH creation and dmac resolution')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.
If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.
Fixes: c1c98501121e ('IB/mlx4: Add support for steerable IB UD QPs')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Some resources are incorrectly organized and at odds with
HW capabilities. Specifically, ILQ, IEQ, QPs, MSS, QOS
and statistics belong in a VSI.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In i40iw_ieq_handle_partial() the check for !status is incorrect.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Currently we are changing the MSS regardless of whether
there is a change or not in MTU. Fix to make the
assignment of MSS dependent on an MTU change.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add a QP reference when terminate timer is started to ensure
the destroy QP doesn't race ahead to free the QP while it is being
referenced in the terminate timer's handler.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
On a device close, the control QP (CQP) is destroyed by calling
cqp_destroy which destroys the CQP and frees its SD buffer memory.
However, if the reset flag is true, cqp_destroy is never called and
leads to a memory leak on SD buffer memory. Fix this by always calling
cqp_destroy, on device close, regardless of reset. The exception to this
when CQP create fails. In this case, the SD buffer memory is already
freed on an error check and there is no need to call cqp_destroy.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When flush QP and there are no pending work requests, signal completion
to unblock i40iw_drain_sq and i40iw_drain_rq which are waiting on
completion for iwqp->sq_drained and iwqp->sq_drained respectively.
Also, signal completion if flush QP fails to prevent the drain SQ or RQ
from being blocked indefintely.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A QP can be double freed if i40iw_cm_disconn() is
called while it is currently being freed by
i40iw_rem_ref(). The fix in i40iw_cm_disconn() will
first check if the QP is already freed before
making another request for the QP to be freed.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
hw_stats is a pointer to i40_iw_dev_stats struct in i40iw_get_hw_stats().
Use hw_stats and not &hw_stats in the memcpy to copy the i40iw device stats
data into rdma_hw_stats counters.
Fixes: b40f4757daa1 ("IB/core: Make device counter infrastructure dynamic")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The macros I40IW_STAG_KEY_FROM_STAG and I40IW_STAG_INDEX_FROM_STAG are
apparently bad - they are using the logical "&&" operation which
does not make sense here. It should have been a bitwise "&" instead.
Since the macros seem to be completely unused, let's simply remove
them so that nobody accidentially uses them in the future. And while
we're at it, also remove the unused macro I40IW_CREATE_STAG.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Defining static data structures in a header file is wrong because
this causes the data structure to be instantiated once in every .c
file it is included in. Hence move the definition of a static
array from a header file into the only .c file in which it is used.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Dean Luick <dean.luick@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Declare the structure mmu_notifier_ops as const as it is only stored in
the ops field of a mmu_notifier structure. The ops field is of type
const struct mmu_notifier_ops *, so mmu_notifier_ops structures having
this property can be declared as const.
Done using coccinelle:
@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct mmu_notifier_ops i@p = {...};
@ok1@
identifier r1.i;
position p;
struct mmu_rb_handler handler;
@@
handler.mn.ops=&i@p
@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct mmu_notifier_ops i={...};
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct mmu_notifier_ops i;
File size before:
text data bss dec hex filename
3566 72 16 3654 e46
drivers/infiniband/hw/hfi1/mmu_rb.o
File size after:
text data bss dec hex filename
3658 0 16 3674 e5a
drivers/infiniband/hw/hfi1/mmu_rb.o
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add rvt_div_round_up_mtu() and rvt_div_mtu() routines to
do the computation based on the pmtu and the log_pmtu.
Change divides in qib, hfi1 to use the new inlines.
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Convert to use new swqe put routine.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Do not allocate credit return base and DMA memory for
NUMA nodes without CPUs.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Convert cq completion returns in both rdmavt drivers
to use the new helper.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Use the standard driver wrapper for QP reference counters.
This makes the code more maintainable.
Fixes: Commit 4d6f85c3fa55 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Some parts of the code don't use the standard release
wrapper rvt_put_qp() for decrementing and testing
the refcount to then try to use a resource.
Replace this code with the standard driver wrapper.
Fixes: Commit 4d6f85c3fa55 ("IB/rdmavt, IB/qib, IB/hfi1: Use new QP put get routines")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The driver should not change the external device request
completed bit when not actually doing an external device
request.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In sc_buffer_alloc(), the sc->alloc_lock is released
before calling sc_release_update(), and it is reacquired
after the function call. This causes CPU lock trading.
Fix it by not dropping the lock before calling
sc_release_update().
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The s_cur_sge field in the qp structure holds a pointer to the
SGE of the currently processed WQE. It assumes the protection
of the RVT_S_BUSY flag to prevent the changing of this field
while the send engine is using it. This scheme works as long
as there is only one instance of the send engine running at a
time.
Scaling of the send engine to multiple cores would break this
assumption as there could be multiple instances of the send engine
running on different CPUs. This opens a window where the QP's
RVT_S_BUSY flag is not set but the send engine is still running.
To prevent accidental changing of the s_cur_sge pointer, the QP's
dependence on it is removed. The SGE pointer is now stored in the
verbs_txreq, which is a per-packet data structure. This ensures
that each individual packet has it's own pointer, which is setup
while the RVT_S_BUSY flag is set.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Low power QSFP AOC cables require a different SerDes
Tx PLL bandwidth setting than the default. The
8051 firmware does not know the details, so the driver
needs to tell the firmware through a special setting.
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The struct hfi1_affinity is not used anymore.
We use the struct hfi1_affinity_node and hfi1_affinity_node_list
instead.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The qp->s_cur_size field assumes that the S_BUSY bit protects
the field from modification after the slock is dropped. Scaling the
send engine to multiple cores would break that assumption.
Correct the issue by carrying the payload size in the txreq structure.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Previously tools like hfi1stats had to access these counters through
debugfs, which often caused permission issue for non-root users. It is
not always acceptable to change the debugfs mounting permission due
to security concerns. When exposed under the IB stats interface, the
counters are universally readable by default.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
For the received packets with payload less or equal 8DWS
RxDmaDataFifoRdUncErr is not reported. There is set RHF.EccErr
if the header is not suppressed. When such packet is detected
on the send side the header suppression mechanism is disabled
by clearing SH bit in the packet header.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Both the 8051 memory and LCB register access require multiple
steps and coordination with the driver. This cannot be safely
done with resource0 alone.
The 8051 memory is exported read-only. LCB is exported read/write.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
qp->r_aflags is already protected by qp->r_lock, therefore,
test_and_clear_bit() doesn't need to be atomic. Profile
shows this function call is costly.
Change the test_and_clear_bit() call to use the non-atomic
variant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When reading multiple dc8051 data memory locations
at once, the read enabled field must be toggled
at every address change. Do that by writing only
the address first, then writing the enable.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
