summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2019-05-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds15-187/+1166
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
2019-05-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds3-0/+410
Pull ARM SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms. Major themes this release: - Conversion of ixp4xx to a modern platform (drivers, DT, bindings) - Moving some of the ep93xx headers around to get it closer to multiplatform enabled. - Cleanups of Davinci This also contains a few patches that were queued up as fixes before 5.1 but I didn't get sent in before release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) ARM: debug-ll: add default address for digicolor ARM: u300: regulator: add MODULE_LICENSE() ARM: ep93xx: move private headers out of mach/* ARM: ep93xx: move pinctrl interfaces into include/linux/soc ARM: ep93xx: keypad: stop using mach/platform.h ARM: ep93xx: move network platform data to separate header ARM: stm32: add AMBA support for stm32 family MAINTAINERS: update arch/arm/mach-davinci ARM: rockchip: add missing of_node_put in rockchip_smp_prepare_pmu ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ...
2019-05-16Merge branch 'fixes' into arm/socOlof Johansson1-0/+1
Merge in a few pending fixes from pre-5.1 that didn't get sent in: MAINTAINERS: update arch/arm/mach-davinci ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1 ARM: dts: imx6q-logicpd: Reduce inrush current on start ARM: dts: imx: Fix the AR803X phy-mode ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply ARM: sunxi: fix a leaked reference by adding missing of_node_put ARM: sunxi: fix a leaked reference by adding missing of_node_put Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds6-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-03irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()Julien Grall1-2/+8
The functions mbi_compose_m{b, s}i_msg may be called from non-preemptible context. However, on RT, iommu_dma_map_msi_msg() requires to be called from a preemptible context. A recent patch split iommu_dma_map_msi_msg in two new functions: one that should be called in preemptible context, the other does not have any requirement. The GICv3 MSI driver is reworked to avoid executing preemptible code in non-preemptible context. This can be achieved by preparing the MSI mapping when allocating the MSI interrupt. Signed-off-by: Julien Grall <julien.grall@arm.com> [maz: only call iommu_dma_prepare_msi once, fix commit log accordingly] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()Julien Grall1-1/+6
ls_scfg_msi_compose_msg() may be called from non-preemptible context. However, on RT, iommu_dma_map_msi_msg() requires to be called from a preemptible context. A recent patch split iommu_dma_map_msi_msg() in two new functions: one that should be called in preemptible context, the other does not have any requirement. The FreeScale SCFG MSI driver is reworked to avoid executing preemptible code in non-preemptible context. This can be achieved by preparing the MSI maping when allocating the MSI interrupt. Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()Julien Grall1-1/+6
its_irq_compose_msi_msg() may be called from non-preemptible context. However, on RT, iommu_dma_map_msi_msg requires to be called from a preemptible context. A recent change split iommu_dma_map_msi_msg() in two new functions: one that should be called in preemptible context, the other does not have any requirement. The GICv3 ITS driver is reworked to avoid executing preemptible code in non-preemptible context. This can be achieved by preparing the MSI mapping when allocating the MSI interrupt. Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-03irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()Julien Grall1-1/+7
gicv2m_compose_msi_msg() may be called from non-preemptible context. However, on RT, iommu_dma_map_msi_msg() requires to be called from a preemptible context. A recent change split iommu_dma_map_msi_msg() in two new functions: one that should be called in preemptible context, the other does not have any requirement. The GICv2m driver is reworked to avoid executing preemptible code in non-preemptible context. This can be achieved by preparing the MSI mapping when allocating the MSI interrupt. Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01irqchip/ti-sci-inta: Add msi domain supportLokesh Vutla2-1/+40
Add a msi domain that is child to the INTA domain. Clients uses the INTA MSI bus layer to allocate irqs in this MSI domain. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01irqchip/ti-sci-inta: Add support for Interrupt Aggregator driverLokesh Vutla3-0/+588
Texas Instruments' K3 generation SoCs has an IP Interrupt Aggregator which is an interrupt controller that does the following: - Converts events to interrupts that can be understood by an interrupt router. - Allows for multiplexing of events to interrupts. Configuration of the interrupt aggregator registers can only be done by a system co-processor and the driver needs to send a message to this co processor over TISCI protocol. Add the required infrastructure to allow the allocation and routing of these events. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-01irqchip/ti-sci-intr: Add support for Interrupt Router driverLokesh Vutla3-0/+286
Texas Instruments' K3 generation SoCs has an IP Interrupt Router that does allows for redirection of input interrupts to host interrupt controller. Interrupt Router inputs are either from a peripheral or from an Interrupt Aggregator which is another interrupt controller. Configuration of the interrupt router registers can only be done by a system co-processor and the driver needs to send a message to this co processor over TISCI protocol. Add support for Interrupt Router driver over TISCI protocol. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/renesas-intc-irqpin: Remove devm_kzalloc() error printingGeert Uytterhoeven1-3/+1
There is no need to print a message if devm_kzalloc() fails, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip: Remove unneeded select IRQ_DOMAINGeert Uytterhoeven1-6/+0
IRQ_DOMAIN_HIERARCHY selects IRQ_DOMAIN, hence there is no need for drivers to select both. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-v3-its: Make free_lpi_range a little cheaperRasmus Villemoes1-30/+31
Using list_add + list_sort to insert an element and keeping the list sorted is a somewhat blunt instrument; one can find the right place to insert in fewer lines of code than the cmp callback uses. Moreover, walking the entire list afterwards to merge adjacent ranges is overkill, since we know that only the just-inserted element may be merged with its neighbours. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-v3-its: Drop redundant initialization in mk_lpi_rangeRasmus Villemoes1-2/+1
There's no reason to ask kmalloc() to zero the allocation, since all the fields get initialized immediately afterwards. Except that there's also not any reason to initialize the ->entry member, since the element gets added to the lpi_range_list immediately. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-v3-its: Move allocation outside mutexRasmus Villemoes1-9/+6
There's no reason to do the allocation of the new lpi_range inside the lpi_range_lock. One could change the code to avoid the allocation altogether in case the freed range can be merged with one or two existing ranges (in which case the allocation would naturally be done under the lock), but it's probably not worth complicating the code for that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/stm32: Use a platform driver for stm32mp1-exti deviceFabien Dessenne1-93/+140
This irqchip driver uses the hwspinlock framework (coprocessor HW regs access concurrency) for the stm32mp1-exti device. Hence, this driver needs to handle the hwspinlock driver dependency using the deferred probe mechanism which requires to move this driver into a platform one with a probe() ops. This applies only for the device which is "st,stm32mp1-exti" compatible, the management of the other devices (st,stm32h7-exti / st,stm32-exti) is kept unchanged (use IRQCHIP_DECLARE) Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-pm: Fix suspend handlingSameer Pujar1-0/+2
If interrupts are enabled for a non-root GIC device that uses the gic-pm driver, when system suspend occurs, the current interrupt state is not saved and restored correctly and so interrupts do not work again on resuming the system. Add a late suspend handler to save and restore the state for these devices. Suggested-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-pm: Update driver to use clk_bulk APIsSameer Pujar1-37/+37
gic-pm driver is using pm-clk framework to manage clock resources, where clocks remain always ON. This happens on Tegra devices which use BPMP co-processor to manage the clocks. Calls to BPMP are always blocking and hence it is necessary to enable/disable clocks during prepare/unprepare phase respectively. When pm-clk is used, prepare count of clock is not balanced until pm_clk_remove() happens. Clock is prepared in the driver probe() and thus prepare count of clock remains non-zero, which in turn keeps clock ON always. Please note that above mentioned behavior is specific to Tegra devices using BPMP for clock management and this should not be seen on other devices. Though this patch uses clk_bulk APIs to address the mentioned behavior, this works fine for all devices. To simplify gic_get_clocks() API is removed and instead probe can do necessary setup. Suggested-by: Mohan Kumar D <mkumard@nvidia.com> Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/imx-irqsteer: Use devm_platform_ioremap_resource() to simplify codeAnson Huang1-3/+1
Use the new helper devm_platform_ioremap_resource() which wraps the platform_get_resource() and devm_ioremap_resource() together, to simplify the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/gic-v3-its: Fix typo in a comment in its_msi_prepare()Julien Grall1-1/+1
The word 'entirely' has been misspelt in a comment in its_msi_prepare(). Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29irqchip/bcm: Restore registration print with %pOFFlorian Fainelli3-0/+8
It is useful to print which interrupt controllers are registered in the system and which parent IRQ they use, especially given that L2 interrupt controllers do not call request_irq() on their parent interrupt and do not appear under /proc/interrupts for that reason. We used to print the base register address virtual address which had little value, use %pOF to print the path to the Device Tree node which maps to the physical address more easily and is what people need to troubleshoot systems. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-29Merge tag 'ixp4xx-for-armsoc' of ↵Olof Johansson3-0/+410
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc This modernizes the IXP4xx platform and adds initial Device Tree Support. We migrate to MULTI_IRQ_HANDLER, bumps the IRQs to offset 16, converts to SPARSE_IRQ, then we add proper subsystem drivers in each subsystem for irqchip, GPIO and clocksource and switch over to using these new drivers. Next we modernize the NPE and QMGR drivers and push them down into drivers/soc. This has been tested on the IXP4xx NSLU2 and the Gateworks GW2358-4. * tag 'ixp4xx-for-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: (31 commits) ARM: dts: Add queue manager and NPE to the IXP4xx DTSI soc: ixp4xx: qmgr: Add DT probe code soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr soc: ixp4xx: npe: Add DT probe code soc: ixp4xx: Add DT bindings for IXP4xx NPE soc: ixp4xx: qmgr: Pass resources soc: ixp4xx: Remove unused functions soc: ixp4xx: Uninline several functions soc: ixp4xx: npe: Pass addresses as resources ARM: ixp4xx: Turn the QMGR into a platform device ARM: ixp4xx: Turn the NPE into a platform device ARM: ixp4xx: Move IXP4xx QMGR and NPE headers ARM: ixp4xx: Move NPE and QMGR to drivers/soc ARM: dts: Add some initial IXP4xx device trees ARM: ixp4xx: Add device tree boot support ARM: ixp4xx: Add DT bindings gpio: ixp4xx: Add OF probing support gpio: ixp4xx: Add DT bindings clocksource/drivers/ixp4xx: Add OF initialization support clocksource/drivers/ixp4xx: Add DT bindings ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-23irqchip: ixp4xx: Add OF initialization supportLinus Walleij1-0/+41
This adds support for probing and settin up the IXP4xx irqchip from device tree. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-22Merge tag 'mips_fixes_5.1_3' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A couple more MIPS fixes: - Fix indirect syscall tracing & seccomp filtering for big endian MIPS64 kernels, which previously loaded the syscall number incorrectly & would always use zero. - Fix performance counter IRQ setup for Atheros/ath79 SoCs, allowing perf to function on those systems. And not really a fix, but a useful addition: - Add a Broadcom mailing list to the MAINTAINERS entry for BMIPS systems to allow relevant engineers to track patch submissions" * tag 'mips_fixes_5.1_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: perf: ath79: Fix perfcount IRQ assignment MIPS: scall64-o32: Fix indirect syscall number load MAINTAINERS: BMIPS: Add internal Broadcom mailing list
2019-04-19irqchip: Add driver for IXP4xxLinus Walleij3-0/+369
The IXP4xx (arch/arm/mach-ixp4xx) is an old Intel XScale platform that has very wide deployment and use. As part of modernizing the platform, we need to implement a proper irqchip in the irqchip subsystem. The IXP4xx irqchip is tightly jotted together with the GPIO controller, and whereas in the past we would deal with this complex logic by adding necessarily different code, we can nowadays modernize it using a hierarchical irqchip. The actual IXP4 irqchip is a simple active low level IRQ controller, whereas the GPIO functionality resides in a different memory area and adds edge trigger support for the interrupts. The interrupts from GPIO lines 0..12 are 1:1 mapped to a fixed set of hardware IRQs on this IRQchip, so we expect the child GPIO interrupt controller to go in and allocate descriptors for these interrupts. For the other interrupts, as we do not yet have DT support for this platform, we create a linear irqdomain and then go in and allocate the IRQs that the legacy boards use. This code will be removed on the DT probe path when we add DT support to the platform. We add some translation code for supporting DT translations for the fwnodes, but we leave most of that for later. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-17MIPS: perf: ath79: Fix perfcount IRQ assignmentPetr Štetiar1-0/+11
Currently it's not possible to use perf on ath79 due to genirq flags mismatch happening on static virtual IRQ 13 which is used for performance counters hardware IRQ 5. On TP-Link Archer C7v5: CPU0 2: 0 MIPS 2 ath9k 4: 318 MIPS 4 19000000.eth 7: 55034 MIPS 7 timer 8: 1236 MISC 3 ttyS0 12: 0 INTC 1 ehci_hcd:usb1 13: 0 gpio-ath79 2 keys 14: 0 gpio-ath79 5 keys 15: 31 AR724X PCI 1 ath10k_pci $ perf top genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys) On TP-Link Archer C7v4: CPU0 4: 0 MIPS 4 19000000.eth 5: 7135 MIPS 5 1a000000.eth 7: 98379 MIPS 7 timer 8: 30 MISC 3 ttyS0 12: 90028 INTC 0 ath9k 13: 5520 INTC 1 ehci_hcd:usb1 14: 4623 INTC 2 ehci_hcd:usb2 15: 32844 AR724X PCI 1 ath10k_pci 16: 0 gpio-ath79 16 keys 23: 0 gpio-ath79 23 keys $ perf top genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1) This problem is happening, because currently statically assigned virtual IRQ 13 for performance counters is not claimed during the initialization of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that this interrupt isn't available for further use. So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU. Tested-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: John Crispin <john@phrozen.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net>
2019-04-05irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()Dan Carpenter1-0/+1
Currently, when irq_domain_add_linear() fails, the error code does not get set so it returns zero which is wrong. Fix it by setting the appropriate error code. Fixes: 9e543e22e204 ("irqchip: Add driver for Loongson-1 interrupt controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20190329062136.GQ32613@kadam
2019-04-04acpi: Create subtable parsing infrastructureKeith Busch6-13/+13
Parsing entries in an ACPI table had assumed a generic header structure. There is no standard ACPI header, though, so less common layouts with different field sizes required custom parsers to go through their subtable entry list. Create the infrastructure for adding different table types so parsing the entries array may be more reused for all ACPI system tables and the common code doesn't need to be duplicated. Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Tested-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-21irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps staticYueHaibing1-1/+1
Fix sparse warning: drivers/irqchip/irq-mvebu-sei.c:481:23: warning: symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <jason@lakedaemon.net> Cc: <andrew@lunn.ch> Cc: <gregory.clement@bootlin.com> Cc: <sebastian.hesselbarth@gmail.com> Cc: <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190321151448.15600-1-yuehaibing@huawei.com
2019-03-21Merge tag 'irqchip-5.1-2' of ↵Thomas Gleixner7-45/+29
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0)
2019-03-21irqchip/mbigen: Don't clear eventid when freeing an MSIJianguo Chen1-0/+3
mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number. The eventid clear call trace: free_irq __free_irq irq_shutdown irq_domain_deactivate_irq __irq_domain_deactivate_irq __irq_domain_deactivate_irq msi_domain_deactivate platform_msi_write_msg mbigen_write_msg Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com> [maz: massaged subject] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/stm32: Don't set rising configuration registers at initFabien Dessenne1-5/+0
The rising configuration status register (rtsr) is not banked. As it is shared with the co-processor, it should not be written at probe time, else the co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/stm32: Don't clear rising/falling config registers at initFabien Dessenne1-5/+0
Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/mmp: Make mmp_irq_domain_ops staticYueHaibing1-1/+1
Fix sparse warning: drivers/irqchip/irq-mmp.c:182:29: warning: symbol 'mmp_irq_domain_ops' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-21irqchip/brcmstb-l2: Make two init functions staticYueHaibing1-2/+2
Fix sparse warnings: drivers/irqchip/irq-brcmstb-l2.c:278:12: warning: symbol 'brcmstb_l2_edge_intc_of_init' was not declared. Should it be static? drivers/irqchip/irq-brcmstb-l2.c:285:12: warning: symbol 'brcmstb_l2_lvl_intc_of_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-20irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmpRasmus Villemoes1-1/+1
The lpi_range_list is supposed to be sorted in ascending order of ->base_id (at least if the range merging is to work), but the current comparison function returns a positive value if rb->base_id > ra->base_id, which means that list_sort() will put A after B in that case - and vice versa, of course. Fixes: 880cb3cddd16 (irqchip/gic-v3-its: Refactor LPI allocator) Cc: stable@vger.kernel.org (v4.19+) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-11irqchip/gic: Drop support for secondary GIC in non-DT systemsMarc Zyngier1-29/+16
We do not have any in-tree platform with this pathological setup, and only a single system (Cavium's cns3xxx) isn't DT aware. Let's drop the secondary GIC support for now, until we remove the above horror altogether. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-10Merge tag 'arm64-upstream' of ↵Linus Torvalds1-32/+233
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...
2019-03-06Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds4-0/+435
Pull ARM SoC late updates from Arnd Bergmann: "Here are two branches that came relatively late during the linux-5.0 development cycle and have dependencies on the other branches: - On the TI OMAP platform, the CPSW Ethernet PHY mode selection driver is being replaced, this puts the final pieces in place - On the DaVinci platform, the interrupt handling code in arch/arm gets moved into a regular device driver in drivers/irqchip. Since they both had some time in linux-next after the 5.0-rc8 release, I'm sending them along with the other updates" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) net: ethernet: ti: cpsw: deprecate cpsw-phy-sel driver ARM: davinci: remove intc related fields from davinci_soc_info irqchip: davinci-cp-intc: move the driver to drivers/irqchip ARM: davinci: cp-intc: remove redundant comments ARM: davinci: cp-intc: drop GPL license boilerplate ARM: davinci: cp-intc: use readl/writel_relaxed() ARM: davinci: cp-intc: unify error handling ARM: davinci: cp-intc: improve coding style ARM: davinci: cp-intc: request the memory region before remapping it ARM: davinci: cp-intc: use the new-style config structure ARM: davinci: cp-intc: convert all hex numbers to lowercase ARM: davinci: cp-intc: use a common prefix for all symbols ARM: davinci: cp-intc: add the new config structures for da8xx SoCs irqchip: davinci-cp-intc: add a new config structure ARM: davinci: cp-intc: add a wrapper around cp_intc_init() ARM: davinci: cp-intc: remove cp_intc.h irqchip: davinci-aintc: move the driver to drivers/irqchip ARM: davinci: aintc: remove unnecessary includes ARM: davinci: aintc: remove the timer-specific irq_set_handler() ARM: davinci: aintc: request memory region before remapping it ...
2019-03-05Merge branch 'irq-core-for-linus' of ↵Linus Torvalds8-93/+387
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The interrupt departement delivers this time: - New infrastructure to manage NMIs on platforms which have a sane NMI delivery, i.e. identifiable NMI vectors instead of a single lump. - Simplification of the interrupt affinity management so drivers don't have to implement ugly loops around the PCI/MSI enablement. - Speedup for interrupt statistics in /proc/stat - Provide a function to retrieve the default irq domain - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - The usual small fixes, improvements and cleanups all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) irqchip/imx-irqsteer: Add multi output interrupts support irqchip/imx-irqsteer: Change to use reg_num instead of irq_group dt-bindings: irq: imx-irqsteer: Add multi output interrupts support dt-binding: irq: imx-irqsteer: Use irq number instead of group number irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt code irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tables irqdomain: Allow the default irq domain to be retrieved irqchip/sifive-plic: Implement irq_set_affinity() for SMP host irqchip/sifive-plic: Differentiate between PLIC handler and context irqchip/sifive-plic: Add warning in plic_init() if handler already present irqchip/sifive-plic: Pre-compute context hart base and enable base PCI/MSI: Remove obsolete sanity checks for multiple interrupt sets genirq/affinity: Remove the leftovers of the original set support nvme-pci: Simplify interrupt allocation genirq/affinity: Add new callback for (re)calculating interrupt sets genirq/affinity: Store interrupt sets size in struct irq_affinity genirq/affinity: Code consolidation irqchip/irq-sifive-plic: Check and continue in case of an invalid cpuid. irqchip/i8259: Fix shutdown order by moving syscore_ops registration dt-bindings: interrupt-controller: loongson ls1x intc ...
2019-03-05irqchip/imx-irqsteer: Fix of_property_read_u32() error handlingArnd Bergmann1-2/+6
gcc points out that irqs_num is not initialized when of_property_read_u32() is an empty stub function: Included from drivers/irqchip/irq-imx-irqsteer.c:7: drivers/irqchip/irq-imx-irqsteer.c: In function 'imx_irqsteer_probe': include/uapi/linux/kernel.h:13:49: error: 'irqs_num' may be used uninitialized in this function [-Werror=maybe-uninitialized] The same can actually happen with CONFIG_OF=y as well, though we don't get a warning then. Add error checking here that lets the code deal with missing or invalid properties as well as avoid the warning. Fixes: 28528fca4908 ("irqchip/imx-irqsteer: Add multi output interrupts support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-23Merge tag 'irqchip-5.1' of ↵Thomas Gleixner8-93/+387
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - Core pseudo-NMI handling code - Allow the default irq domain to be retrieved - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - A handful of other fixes (i8259, GICv3, PLIC)
2019-02-22irqchip/imx-irqsteer: Add multi output interrupts supportAisheng Dong1-20/+68
One irqsteer channel can support up to 8 output interrupts. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-22irqchip/imx-irqsteer: Change to use reg_num instead of irq_groupAisheng Dong1-16/+19
One group can manage 64 interrupts by using two registers (e.g. STATUS/SET). However, the integrated irqsteer may support only 32 interrupts which needs only one register in a group. But the current driver assume there's a mininum of two registers in a group which result in a wrong register map for 32 interrupts per channel irqsteer. Let's use the reg_num caculated by interrupts per channel instead of irq_group to cover this case. Cc: Rob Herring <robh+dt@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-21irqchip/brcmstb-l2: Use _irqsave locking variants in non-interrupt codeDoug Berger1-4/+6
Using the irq_gc_lock/irq_gc_unlock functions in the suspend and resume functions creates the opportunity for a deadlock during suspend, resume, and shutdown. Using the irq_gc_lock_irqsave/ irq_gc_unlock_irqrestore variants prevents this possible deadlock. Cc: stable@vger.kernel.org Fixes: 7f646e92766e2 ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> [maz: tidied up $SUBJECT] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-21irqchip/gicv3-its: Use NUMA aware memory allocation for ITS tablesShanker Donthineni1-10/+16
The NUMA node information is visible to ITS driver but not being used other than handling hardware errata. ITS/GICR hardware accesses to the local NUMA node is usually quicker than the remote NUMA node. How slow the remote NUMA accesses are depends on the implementation details. This patch allocates memory for ITS management tables and command queue from the corresponding NUMA node using the appropriate NUMA aware functions. This change improves the performance of the ITS tables read latency on systems where it has more than one ITS block, and with the slower inter node accesses. Apache Web server benchmarking using ab tool on a HiSilicon D06 board with multiple numa mem nodes shows Time per request and Transfer rate improvements of ~3.6% with this patch. Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Ganapatrao Kulkarni <gkulkarni@marvell.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-21irqchip/sifive-plic: Implement irq_set_affinity() for SMP hostAnup Patel1-6/+39
Currently on SMP host, all CPUs take external interrupts routed via PLIC. All CPUs will try to claim a given external interrupt but only one of them will succeed while other CPUs would simply resume whatever they were doing before. This means if we have N CPUs then for every external interrupt N-1 CPUs will always fail to claim it and waste their CPU time. Instead of above, external interrupts should be taken by only one CPU and we should have provision to explicitly specify IRQ affinity from kernel-space or user-space. This patch provides irq_set_affinity() implementation for PLIC driver. It also updates irq_enable() such that PLIC interrupts are only enabled for one of CPUs specified in IRQ affinity mask. With this patch in-place, we can change IRQ affinity at any-time from user-space using procfs. Example: / # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 8: 44 0 0 0 SiFive PLIC 8 virtio0 10: 48 0 0 0 SiFive PLIC 10 ttyS0 IPI0: 55 663 58 363 Rescheduling interrupts IPI1: 0 1 3 16 Function call interrupts / # / # / # echo 4 > /proc/irq/10/smp_affinity / # / # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 8: 45 0 0 0 SiFive PLIC 8 virtio0 10: 160 0 17 0 SiFive PLIC 10 ttyS0 IPI0: 68 693 77 410 Rescheduling interrupts IPI1: 0 2 3 16 Function call interrupts Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-21irqchip/sifive-plic: Differentiate between PLIC handler and contextAnup Patel1-8/+8
We explicitly differentiate between PLIC handler and context because PLIC context is for given mode of HART whereas PLIC handler is per-CPU software construct meant for handling interrupts from a particular PLIC context. To achieve this differentiation, we rename "nr_handlers" to "nr_contexts" and "nr_mapped" to "nr_handlers" in plic_init(). Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-21irqchip/sifive-plic: Add warning in plic_init() if handler already presentAnup Patel1-0/+5
We have two enteries (one for M-mode and another for S-mode) in the interrupts-extended DT property of PLIC DT node for each HART. It is expected that firmware/bootloader will set M-mode HWIRQ line of each HART to 0xffffffff (i.e. -1) in interrupts-extended DT property because Linux runs in S-mode only. If firmware/bootloader is buggy then it will not correctly update interrupts-extended DT property which might result in a plic_handler configured twice. This patch adds a warning in plic_init() if a plic_handler is already marked present. This warning provides us a hint about incorrectly updated interrupts-extended DT property. Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>