summaryrefslogtreecommitdiff
path: root/drivers/md/dm-table.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-25dm: remove the make_request_fn check in device_area_is_invalidChristoph Hellwig1-17/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-03block: don't handle bio based drivers in blk_revalidate_disk_zonesChristoph Hellwig1-5/+7
bio based drivers only need to update q->nr_zones. Do that manually instead of overloading blk_revalidate_disk_zones to keep that function simpler for the next round of changes that will rely even more on the request based functionality. Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-05dm table: do not allow request-based DM to stack on partitionsMike Snitzer1-19/+8
Partitioned request-based devices cannot be used as underlying devices for request-based DM because no partition offsets are added to each incoming request. As such, until now, stacking on partitioned devices would _always_ result in data corruption (e.g. wiping the partition table, writing to other partitions, etc). Fix this by disallowing request-based stacking on partitions. While at it, since all .request_fn support has been removed from block core, remove legacy dm-table code that differentiated between blk-mq and .request_fn request-based. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-23dm: make dm_table_find_target return NULLMikulas Patocka1-5/+3
Currently, if we pass too high sector number to dm_table_find_target, it returns zeroed dm_target structure and callers test if the structure is zeroed with the macro dm_target_is_valid. However, returning NULL is common practice to indicate errors. This patch refactors the dm code, so that dm_table_find_target returns NULL and its callers test the returned value for NULL. The macro dm_target_is_valid is deleted. In alloc_targets, we no longer allocate an extra zeroed target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-08-23dm table: fix invalid memory accesses with too high sector numberMikulas Patocka1-1/+4
If the sector number is too high, dm_table_find_target() should return a pointer to a zeroed dm_target structure (the caller should test it with dm_target_is_valid). However, for some table sizes, the code in dm_table_find_target() that performs btree lookup will access out of bound memory structures. Fix this bug by testing the sector number at the beginning of dm_table_find_target(). Also, add an "inline" keyword to the function dm_table_get_size() because this is a hot path. Fixes: 512875bd9661 ("dm: table detect io beyond device") Cc: stable@vger.kernel.org Reported-by: Zhang Tao <kontais@zoho.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-31dm table: fix various whitespace issues with recent DAX codeMike Snitzer1-7/+7
Also, rename device_synchronous to device_dax_synchronous. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-31dm table: fix dax_dev NULL dereference in device_synchronous()Pankaj Gupta1-1/+1
If a device doesn't support DAX its 'dax_dev' is NULL. Fix device_synchronous() to first check if dax_dev is NULL before dereferencing it. Fixes: 2e9ee0955d3c ("dm: enable synchronous dax") Reported-by: jencce.kernel@gmail.com Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-07-18Merge tag 'libnvdimm-for-5.3' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Primarily just the virtio_pmem driver: - virtio_pmem The new virtio_pmem facility introduces a paravirtualized persistent memory device that allows a guest VM to use DAX mechanisms to access a host-file with host-page-cache. It arranges for MAP_SYNC to be disabled and instead triggers a host fsync() when a 'write-cache flush' command is sent to the virtual disk device. - Miscellaneous small fixups" * tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: virtio_pmem: fix sparse warning xfs: disable map_sync for async flush ext4: disable map_sync for async flush dax: check synchronous mapping is supported dm: enable synchronous dax libnvdimm: add dax_dev sync flag virtio-pmem: Add virtio pmem driver libnvdimm: nd_region flush callback support libnvdimm, namespace: Drop uuid_t implementation detail
2019-07-06dm: enable synchronous daxPankaj Gupta1-6/+18
This patch sets dax device 'DAXDEV_SYNC' flag if all the target devices of device mapper support synchrononous DAX. If device mapper consists of both synchronous and asynchronous dax devices, we don't set 'DAXDEV_SYNC' flag. 'dm_table_supports_dax' is refactored to pass 'iterate_devices_fn' as argument so that the callers can pass the appropriate functions. Suggested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-06-25dm table: don't copy from a NULL pointer in realloc_argv()Jerome Marchand1-1/+1
For the first call to realloc_argv() in dm_split_args(), old_argv is NULL and size is zero. Then memcpy is called, with the NULL old_argv as the source argument and a zero size argument. AFAIK, this is undefined behavior and generates the following warning when compiled with UBSAN on ppc64le: In file included from ./arch/powerpc/include/asm/paca.h:19, from ./arch/powerpc/include/asm/current.h:16, from ./include/linux/sched.h:12, from ./include/linux/kthread.h:6, from drivers/md/dm-core.h:12, from drivers/md/dm-table.c:8: In function 'memcpy', inlined from 'realloc_argv' at drivers/md/dm-table.c:565:3, inlined from 'dm_split_args' at drivers/md/dm-table.c:588:9: ./include/linux/string.h:345:9: error: argument 2 null where non-null expected [-Werror=nonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/md/dm-table.c: In function 'dm_split_args': ./include/linux/string.h:345:9: note: in a call to built-in function '__builtin_memcpy' Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-05-21dax: Arrange for dax_supported check to span multiple devicesDan Williams1-6/+11
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-04-01dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errorsIlya Dryomov1-0/+39
Some devices don't use blk_integrity but still want stable pages because they do their own checksumming. Examples include rbd and iSCSI when data digests are negotiated. Stacking DM (and thus LVM) on top of these devices results in sporadic checksum errors. Set BDI_CAP_STABLE_WRITES if any underlying device has it set. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-02-15block: kill QUEUE_FLAG_NO_SG_MERGEMing Lei1-13/+0
Since bdced438acd83ad83a6c ("block: setup bi_phys_segments after splitting"), physical segment number is mainly figured out in blk_queue_split() for fast path, and the flag of BIO_SEG_VALID is set there too. Now only blk_recount_segments() and blk_recalc_rq_segments() use this flag. Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID is set in blk_queue_split(). For another user of blk_recalc_rq_segments(): - run in partial completion branch of blk_update_request, which is an unusual case - run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed since dm-rq is the only user. Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the current setup of the I/O path, as it isn't going to save you a significant amount of cycles. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-18dm: do not allow readahead to limit IO sizeJaegeuk Kim1-0/+3
Update DM to set the bdi's io_pages. This fixes reads to be capped at the device's max request size (even if user's read IO exceeds the established readahead setting). Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting") Cc: stable@vger.kernel.org Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-11-16block: add queue_is_mq() helperJens Axboe1-2/+2
Various spots check for q->mq_ops being non-NULL, but provide a helper to do this instead. Where the ->mq_ops != NULL check is redundant, remove it. Since mq == rq-based now that legacy is gone, get rid of the queue_is_rq_based() and just use queue_is_mq() everywhere. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-26Merge tag 'for-4.20/dm-changes' of ↵Linus Torvalds1-34/+12
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - The biggest change this cycle is to remove support for the legacy IO path (.request_fn) from request-based DM. Jens has already started preparing for complete removal of the legacy IO path in 4.21 but this earlier removal of support from DM has been coordinated with Jens (as evidenced by the commit being attributed to him). Making request-based DM exclussively blk-mq only cleans up that portion of DM core quite nicely. - Convert the thinp and zoned targets over to using refcount_t where applicable. - A couple fixes to the DM zoned target for refcounting and other races buried in the implementation of metadata block creation and use. - Small cleanups to remove redundant unlikely() around a couple WARN_ON_ONCE(). - Simplify how dm-ioctl copies from userspace, eliminating some potential for a malicious user trying to change the executed ioctl after its processing has begun. - Tweaked DM crypt target to use the DM device name when naming the various workqueues created for a particular DM crypt device (makes the N workqueues for a DM crypt device more easily understood and enhances user's accounting capabilities at a glance via "ps") - Small fixup to remove dead branch in DM writecache's memory_entry(). * tag 'for-4.20/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm writecache: remove disabled code in memory_entry() dm zoned: fix various dmz_get_mblock() issues dm zoned: fix metadata block ref counting dm raid: avoid bitmap with raid4/5/6 journal device dm crypt: make workqueue names device-specific dm: add dm_table_device_name() dm ioctl: harden copy_params()'s copy_from_user() from malicious users dm: remove unnecessary unlikely() around WARN_ON_ONCE() dm zoned: target: use refcount_t for dm zoned reference counters dm thin: use refcount_t for thin_c reference counting dm table: require that request-based DM be layered on blk-mq devices dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASED dm: remove legacy request-based IO path
2018-10-25block: Introduce blk_revalidate_disk_zones()Damien Le Moal1-0/+10
Drivers exposing zoned block devices have to initialize and maintain correctness (i.e. revalidate) of the device zone bitmaps attached to the device request queue (seq_zones_bitmap and seq_zones_wlock). To simplify coding this, introduce a generic helper function blk_revalidate_disk_zones() suitable for most (and likely all) cases. This new function always update the seq_zones_bitmap and seq_zones_wlock bitmaps as well as the queue nr_zones field when called for a disk using a request based queue. For a disk using a BIO based queue, only the number of zones is updated since these queues do not have schedulers and so do not need the zone bitmaps. With this change, the zone bitmap initialization code in sd_zbc.c can be replaced with a call to this function in sd_zbc_read_zones(), which is called from the disk revalidate block operation method. A call to blk_revalidate_disk_zones() is also added to the null_blk driver for devices created with the zoned mode enabled. Finally, to ensure that zoned devices created with dm-linear or dm-flakey expose the correct number of zones through sysfs, a call to blk_revalidate_disk_zones() is added to dm_table_set_restrictions(). The zone bitmaps allocated and initialized with blk_revalidate_disk_zones() are freed automatically from __blk_release_queue() using the block internal function blk_queue_free_zone_bitmaps(). Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-18dm: add dm_table_device_name()Michał Mirosław1-0/+6
Add a shortcut for dm_device_name(dm_table_get_md(t)). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-12dm table: require that request-based DM be layered on blk-mq devicesMike Snitzer1-1/+17
Now that request-based DM (multipath) is blk-mq only: this restriction is required while the legacy request-based IO path still exists. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-11dm: rename DM_TYPE_MQ_REQUEST_BASED to DM_TYPE_REQUEST_BASEDMike Snitzer1-6/+1
Now that request-based DM is only using blk-mq, there is no need to differentiate between legacy "rq" and new "mq". We're back to a single request-based DM -- and there was much rejoicing! Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-10-11dm: remove legacy request-based IO pathJens Axboe1-44/+5
dm supports both, and since we're killing off the legacy path in general, get rid of it in dm. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-28dm: prevent DAX mounts if not supportedRoss Zwisler1-3/+4
Currently device_supports_dax() just checks to see if the QUEUE_FLAG_DAX flag is set on the device's request queue to decide whether or not the device supports filesystem DAX. Really we should be using bdev_dax_supported() like filesystems do at mount time. This performs other tests like checking to make sure the dax_direct_access() path works. We also explicitly clear QUEUE_FLAG_DAX on the DM device's request queue if any of the underlying devices do not support DAX. This makes the handling of QUEUE_FLAG_DAX consistent with the setting/clearing of most other flags in dm_table_set_restrictions(). Now that bdev_dax_supported() explicitly checks for QUEUE_FLAG_DAX, this will ensure that filesystems built upon DM devices will only be able to mount with DAX if all underlying devices also support DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Fixes: commit 545ed20e6df6 ("dm: add infrastructure for DAX support") Cc: stable@vger.kernel.org Acked-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05overflow.h: Add allocation size calculation helpersKees Cook1-5/+5
In preparation for replacing unchecked overflows for memory allocations, this creates helpers for the 3 most common calculations: array_size(a, b): 2-dimensional array array3_size(a, b, c): 3-dimensional array struct_size(ptr, member, n): struct followed by n-many trailing members Each of these return SIZE_MAX on overflow instead of wrapping around. (Additionally renames a variable named "array_size" to avoid future collision.) Co-developed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-06Merge tag 'for-4.17/dm-changes' of ↵Linus Torvalds1-0/+31
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM core passthrough ioctl fix to retain reference to DM table, and that table's block devices, while issuing the ioctl to one of those block devices. - DM core passthrough ioctl fix to _not_ override the fmode_t used to issue the ioctl. Overriding by using the fmode_t that the block device was originally open with during DM table load is a liability. - Add DM core support for secure erase forwarding and update the DM linear and DM striped targets to support them. - A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write same, write zeroes) for targets that make use of the non-splitting IO variant (as is done for multipath or thinp when layered directly on NVMe). - Allow DM targets to return a payload in response to a DM message that they are sent. This is useful for DM targets that would like to provide statistics data in response to DM messages. - Update DM bufio to support non-power-of-2 block sizes. Numerous other related changes prepare the DM bufio code for this support. - Fix DM crypt to use a bounded amount of memory across the entire system. This is to avoid OOM that can otherwise occur in response to certain pathological IO workloads (e.g. discarding a large DM crypt device). - Add a 'check_at_most_once' feature to the DM verity target to allow verity to be used on mobile devices that have very limited resources. - Fix the DM integrity target to fail early if a keyed algorithm (e.g. HMAC) is to be used but the key isn't set. - Add non-power-of-2 support to the DM unstripe target. - Eliminate the use of a Variable Length Array in the DM stripe target. - Update the DM log-writes target to record metadata (REQ_META flag). - DM raid fixes for its nosync status and some variable range issues. * tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits) dm: remove fmode_t argument from .prepare_ioctl hook dm: hold DM table for duration of ioctl rather than use blkdev_get dm raid: fix parse_raid_params() variable range issue dm verity: make verity_for_io_block static dm verity: add 'check_at_most_once' option to only validate hashes once dm bufio: don't embed a bio in the dm_buffer structure dm bufio: support non-power-of-two block sizes dm bufio: use slab cache for dm_buffer structure allocations dm bufio: reorder fields in dm_buffer structure dm bufio: relax alignment constraint on slab cache dm bufio: remove code that merges slab caches dm bufio: get rid of slab cache name allocations dm bufio: move dm-bufio.h to include/linux/ dm bufio: delete outdated comment dm: add support for secure erase forwarding dm: backfill abnormal IO support to non-splitting IO submission dm raid: fix nosync status dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios() dm stripe: get rid of a Variable Length Array (VLA) dm log writes: record metadata flag for better flags record ...
2018-04-06Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds1-8/+8
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-03dm: add support for secure erase forwardingDenis Semakin1-0/+31
Set QUEUE_FLAG_SECERASE in DM device's queue_flags if a DM table's data devices support secure erase. Also, add support for secure erase to both the linear and striped targets. Signed-off-by: Denis Semakin <d.semakin@omprussia.ru> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-09block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche1-8/+8
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-07dm table: allow upgrade from bio-based to specialized bio-based variantMike Snitzer1-9/+5
In practice this is really only meaningful in the context of the DM multipath target (which uses dm_table_set_type() to set the type of device DM should create via its "queue_mode" option). So this change allows a DM multipath device with "queue_mode bio" to be upgraded from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED -- iff the underlying device(s) are NVMe. DM_TYPE_NVME_BIO_BASED is just a DM core implementation detail that allows for NVMe-specific optimizations (e.g. use direct_make_request instead of generic_make_request). If in the future there is no benefit or need to distinguish NVMe vs not: then it will be removed. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-07dm table: fix "nvme" testMikulas Patocka1-1/+1
The strncmp function should compare 4 bytes. Fixes: 22c11858e8002 ("dm: introduce DM_TYPE_NVME_BIO_BASED") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-01-29dm table: fix NVMe bio-based dm_table_determine_type() validationMike Snitzer1-22/+35
The 'verify_rq_based:' code in dm_table_determine_type() was checking all devices in the DM table rather than only checking the data devices. Fix this by using the immutable target's iterate_devices method. Also, tweak the block of dm_table_determine_type() code that decides whether to upgrade from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED so that it makes sure the immutable_target doesn't support require splitting IOs. These changes have been verified to allow a "thin-pool" target whose data device is an NVMe device to be upgraded to DM_TYPE_NVME_BIO_BASED. Using the thin-pool in NVMe bio-based mode was verified to pass all the device-mapper-test-suite's "thin-provisioning" tests. Also verified that request-based DM multipath (with queue_mode "rq" and "mq") works as expected using the 'mptest' harness. Fixes: 22c11858e ("dm: introduce DM_TYPE_NVME_BIO_BASED") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-12-20dm: introduce DM_TYPE_NVME_BIO_BASEDMike Snitzer1-6/+48
If dm_table_determine_type() establishes DM_TYPE_NVME_BIO_BASED then all devices in the DM table do not support partial completions. Also, the table has a single immutable target that doesn't require DM core to split bios. This will enable adding NVMe optimizations to bio-based DM. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-12-13dm: set QUEUE_FLAG_DAX accordingly in dm_table_set_restrictions()Mike Snitzer1-0/+2
Rather than having DAX support be unique by setting it based on table type in dm_setup_md_queue(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-12-13dm: ensure bio-based DM's bioset and io_pool support targets' maximum IOsMike Snitzer1-4/+7
alloc_multiple_bios() assumes it can allocate the requested number of bios but until now there was no gaurantee that the mempools would be accomodating. Suggested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-12-04dm table: fix regression from improper dm_dev_internal.count refcount_t ↵Mike Snitzer1-2/+3
conversion Multiple refcounts are needed if the device was already added. The micro-optimization of setting the refcount to 1 on first added (rather than fall thru to a common refcount_inc) lost sight of the fact that the refcount_inc is also needed for the case when the device already exists and the mode need not be upgraded. Fixes: 2a0b4682e0 ("dm: convert dm_dev_internal.count from atomic_t to refcount_t") Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-17Merge tag 'for-4.15/dm-changes-2' of ↵Linus Torvalds1-21/+22
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull more device mapper updates from Mike Snitzer: "Given your expected travel I figured I'd get these fixes to you sooner rather than later. - a DM multipath stable@ fix to silence an annoying error message that isn't _really_ an error - a DM core @stable fix for discard support that was enabled for an entire DM device despite only having partial support for discards due to a mix of discard capabilities across the underlying devices. - a couple other DM core discard fixes. - a DM bufio @stable fix that resolves a 32-bit overflow" * tag 'for-4.15/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix integer overflow when limiting maximum cache size dm: clear all discard attributes in queue_limits when discards are disabled dm: do not set 'discards_supported' in targets that do not need it dm: discard support requires all targets in a table support discards dm mpath: remove annoying message of 'blk_get_request() returned -11'
2017-11-17dm: clear all discard attributes in queue_limits when discards are disabledMike Snitzer1-2/+8
Otherwise, it can happen that the QUEUE_FLAG_DISCARD isn't set but the various discard attributes (which get exposed via sysfs) may be set. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-17dm: discard support requires all targets in a table support discardsMike Snitzer1-19/+14
A DM device with a mix of discard capabilities (due to some underlying devices not having discard support) _should_ just return -EOPNOTSUPP for the region of the device that doesn't support discards (even if only by way of the underlying driver formally not supporting discards). BUT, that does ask the underlying driver to handle something that it never advertised support for. In doing so we're exposing users to the potential for a underlying disk driver hanging if/when a discard is issued a the device that is incapable and never claimed to support discards. Fix this by requiring that each DM target in a DM table provide discard support as a prereq for a DM device to advertise support for discards. This may cause some configurations that were happily supporting discards (even in the face of a mix of discard support) to stop supporting discards -- but the risk of users hitting driver hangs, and forced reboots, outweighs supporting those fringe mixed discard configurations. Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-11-15Merge tag 'for-4.15/dm' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - a few conversions from atomic_t to ref_count_t - a DM core fix for a race during device destruction that could result in a BUG_ON - a stable@ fix for a DM cache race condition that could lead to data corruption when operating in writeback mode (writethrough is default) - various DM cache cleanups and improvements - add DAX support to the DM log-writes target - a fix for the DM zoned target's ability to deal with the last zone of the drive being smaller than all others - a stable@ DM crypt and DM integrity fix for a negative check that was to restrictive (prevented slab debug with XFS ontop of DM crypt from working) - a DM raid target fix for a panic that can occur when forcing a raid to sync * tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (25 commits) dm cache: lift common migration preparation code to alloc_migration() dm cache: remove usused deferred_cells member from struct cache dm cache policy smq: allocate cache blocks in order dm cache policy smq: change max background work from 10240 to 4096 blocks dm cache background tracker: limit amount of background work that may be issued at once dm cache policy smq: take origin idle status into account when queuing writebacks dm cache policy smq: handle races with queuing background_work dm raid: fix panic when attempting to force a raid to sync dm integrity: allow unaligned bv_offset dm crypt: allow unaligned bv_offset dm: small cleanup in dm_get_md() dm: fix race between dm_get_from_kobject() and __dm_destroy() dm: allocate struct mapped_device with kvzalloc dm zoned: ignore last smaller runt zone dm space map metadata: use ARRAY_SIZE dm log writes: add support for DAX dm log writes: add support for inline data buffers dm cache: simplify get_per_bio_data() by removing data_size argument dm cache: remove all obsolete writethrough-specific code dm cache: submit writethrough writes in parallel to origin and cache ...
2017-10-24dm: convert dm_dev_internal.count from atomic_t to refcount_tElena Reshetova1-3/+3
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable dm_dev_internal.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Windsor <dwindsor@gmail.com> Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-10-06block: remove QUEUE_FLAG_STACKABLEChristoph Hellwig1-14/+1
We already have a queue_is_rq_based helper to check if a request_queue is request based, so we can remove the flag for it. Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-08-28dm: constify argument arraysEric Biggers1-3/+4
The arrays of 'struct dm_arg' are never modified by the device-mapper core, so constify them so that they are placed in .rodata. (Exception: the args array in dm-raid cannot be constified because it is allocated on the stack and modified.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-26dm, dax: Make sure dm_dax_flush() is called if device supports itVivek Goyal1-0/+35
Currently dm_dax_flush() is not being called, even if underlying dax device supports write cache, because DAXDEV_WRITE_CACHE is not being propagated up to the DM dax device. If the underlying dax device supports write cache, set DAXDEV_WRITE_CACHE on the DM dax device. This will cause dm_dax_flush() to be called. Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support") Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-19dm table: add zoned block devices validationDamien Le Moal1-0/+162
1) Introduce DM_TARGET_ZONED_HM feature flag: The target drivers currently available will not operate correctly if a table target maps onto a host-managed zoned block device. To avoid problems, introduce the new feature flag DM_TARGET_ZONED_HM to allow a target to explicitly state that it supports host-managed zoned block devices. This feature is checked for all targets in a table if any of the table's block devices are host-managed. Note that as host-aware zoned block devices are backward compatible with regular block devices, they can be used by any of the current target types. This new feature is thus restricted to host-managed zoned block devices. 2) Check device area zone alignment: If a target maps to a zoned block device, check that the device area is aligned on zone boundaries to avoid problems with REQ_OP_ZONE_RESET operations (resetting a partially mapped sequential zone would not be possible). This also facilitates the processing of zone report with REQ_OP_ZONE_REPORT bios. 3) Check block devices zone model compatibility When setting the DM device's queue limits, several possibilities exists for zoned block devices: 1) The DM target driver may want to expose a different zone model (e.g. host-managed device emulation or regular block device on top of host-managed zoned block devices) 2) Expose the underlying zone model of the devices as-is To allow both cases, the underlying block device zone model must be set in the target limits in dm_set_device_limits() and the compatibility of all devices checked similarly to the logical block size alignment. For this last check, introduce validate_hardware_zoned_model() to check that all targets of a table have the same zone model and that the zone size of the target devices are equal. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [Mike Snitzer refactored Damien's original work to simplify the code] Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-05-03Merge tag 'for-4.12/dm-changes' of ↵Linus Torvalds1-38/+61
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - A major update for DM cache that reduces the latency for deciding whether blocks should migrate to/from the cache. The bio-prison-v2 interface supports this improvement by enabling direct dispatch of work to workqueues rather than having to delay the actual work dispatch to the DM cache core. So the dm-cache policies are much more nimble by being able to drive IO as they see fit. One immediate benefit from the improved latency is a cache that should be much more adaptive to changing workloads. - Add a new DM integrity target that emulates a block device that has additional per-sector tags that can be used for storing integrity information. - Add a new authenticated encryption feature to the DM crypt target that builds on the capabilities provided by the DM integrity target. - Add MD interface for switching the raid4/5/6 journal mode and update the DM raid target to use it to enable aid4/5/6 journal write-back support. - Switch the DM verity target over to using the asynchronous hash crypto API (this helps work better with architectures that have access to off-CPU algorithm providers, which should reduce CPU utilization). - Various request-based DM and DM multipath fixes and improvements from Bart and Christoph. - A DM thinp target fix for a bio structure leak that occurs for each discard IFF discard passdown is enabled. - A fix for a possible deadlock in DM bufio and a fix to re-check the new buffer allocation watermark in the face of competing admin changes to the 'max_cache_size_bytes' tunable. - A couple DM core cleanups. * tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits) dm bufio: check new buffer allocation watermark every 30 seconds dm bufio: avoid a possible ABBA deadlock dm mpath: make it easier to detect unintended I/O request flushes dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit() dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH dm: introduce enum dm_queue_mode to cleanup related code dm mpath: verify __pg_init_all_paths locking assumptions at runtime dm: verify suspend_locking assumptions at runtime dm block manager: remove an unused argument from dm_block_manager_create() dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue() dm mpath: delay requeuing while path initialization is in progress dm mpath: avoid that path removal can trigger an infinite loop dm mpath: split and rename activate_path() to prepare for its expanded use dm ioctl: prevent stack leak in dm ioctl call dm integrity: use previously calculated log2 of sectors_per_block dm integrity: use hex2bin instead of open-coded variant dm crypt: replace custom implementation of hex2bin() dm crypt: remove obsolete references to per-CPU state dm verity: switch to using asynchronous hash crypto API dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues ...
2017-04-28dm: introduce enum dm_queue_mode to cleanup related codeBart Van Assche1-7/+7
Introduce an enumeration type for the queue mode. This patch does not change any functionality but makes the DM code easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-28dm: verify suspend_locking assumptions at runtimeBart Van Assche1-0/+4
Ensure that the assumptions about the caller holding suspend_lock are checked at runtime if lockdep is enabled. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm: mark targets that pass integrity dataMikulas Patocka1-0/+7
A dm-crypt on dm-integrity device incorrectly advertises an integrity profile on the DM crypt device. It can be seen in the files "/sys/block/dm-*/integrity/*" that both dm-integrity and dm-crypt target advertise the integrity profile. That is incorrect, only the dm-integrity target should advertise the integrity profile. A general problem in DM is that if we have a DM device that depends on another device with an integrity profile, the upper device will always advertise the integrity profile, even when the target driver doesn't support handling integrity data. Most targets don't support integrity data, so we provide a whitelist of targets that support it (linear, delay and striped). The targets that support passing integrity data to the lower device are marked with the flag DM_TARGET_PASSES_INTEGRITY. The DM core will now advertise integrity data on a DM device only if all the targets support the integrity data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24dm table: replace while loops with for loopsMikulas Patocka1-31/+32
Also remove some unnecessary use of uninitialized_var(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-08block: remove the discard_zeroes_data flagChristoph Hellwig1-19/+0
Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can kill this hack. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>