summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2016-10-07Merge tag 'mfd-for-linus-4.9' of ↵Linus Torvalds38-271/+1226
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds7-487/+325
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-04Merge tag 'regulator-v4.9' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is an extremely quiet release for the regulator API, we've got a small set of bug fixes and minor feature enhancements for drivers plus a couple of more visible changes: - add support for ramp times in regulators that don't use selectors. - new driver for LTC3676" * tag 'regulator-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dbx500: remove unused functions in dbx500-prcmu.c regulator: pv88080: Update regulator for PV88080 BB silicon support regulator: core: don't return error with inadequate reason regulator: tps65910: Work around silicon erratum SWCZ010 regulator: core: Add set_voltage_time op regulator: core: Don't skip set_voltage_time when ramp delay disabled regulator: core: Simplify error flow in _regulator_do_set_voltage() regulator: core: Use local ops variable in _regulator_do_set_voltage() regulator: hi6421: mark hi6421_regulator_ldo_get_optimum_mode() static regulator: Kconfig: Fix typo regulator: bindings: Use the correct symbol for second regulator: Remove support for optional supplies in the bulk API regulator: Add LTC3676 support regulator: rk808: Delete owner assignment regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs mfd: tps65218: add version check to the PMIC probe
2016-10-04mfd: arizona: Handle probe deferral for reset GPIOCharles Keepax1-4/+9
The Arizona CODECs will generally function correctly without a reset line although it is strongly advised to have one, as such we do allow the system to boot if the reset gpio is missing or incorrectly specified. However we should fail probe if we get a probe deferral request, this patch adds handling for this case. Reported-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Remove arizona_of_get_named_gpio helper functionCharles Keepax1-20/+7
This function is only used in a single place and no new users will be added as all the devices other required GPIOs are already handled. As such just merge the code back into the calling function. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-10-04mfd: arizona: Add DT options for max_channels_clocked and PDM speaker configRichard Fitzgerald1-0/+30
This patch adds DT settings for the max_channels_clocked, spk_fmt and spk_mute pdata. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl6040: Register child device for twl6040-pdmclkPeter Ujfalusi1-0/+5
The McPDM in OMAP4/5 is using the pdmclk from twl6040 as functional clock. The twl6040-pdmclk driver provides a clock which can be used to make sure that the pdmclk is active when the McPDM is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: cros_ec_spi: Remove unused variable 'request'Lee Jones1-2/+0
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: omap-usb-host: Return value is not 'const int'Lee Jones1-1/+1
Change from 'const int' to just 'int'. Cc: <robh+dt@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove 'weak' function ↵Lee Jones1-9/+1
suspend_test_wake_cause_interrupt_is_mine() There are no other functions which can over-ride it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()Lee Jones1-54/+0
Doesn't appear to be used. No call sites exist. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() callsLee Jones1-19/+0
There are no call sites for these functions. Strip them out. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Prevent initialised field from being over-writtenLee Jones1-29/+21
Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max8997-irq: 'inline' should be at the beginning of the declarationLee Jones1-1/+1
Reported by [-Wold-style-declaration]. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: tps65217: Fix nonstandard declarationArnd Bergmann1-1/+1
The tps65217 gained a new warning when building with W=1: drivers/mfd/tps65217.c:85:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] This fixes it by putting the 'inline' modifier before 'const'. Fixes: 262d5cc6ceb2 ("mfd: tps65217: Add support for IRQs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: lp873x: Remove unused mutex lock from struct lp873xAxel Lin1-2/+0
The mutex is not used, so remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: atmel-hlcdc: Do not sleep in atomic contextBoris Brezillon1-2/+3
readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held). Replace the readl_poll_timeout() call by readl_poll_timeout_atomic(). Cc: <stable@vger.kernel.org> Fixes: ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: exynos-lpass: Mark PM functions as __maybe_unusedArnd Bergmann1-4/+2
The newly added exynos lpass driver produces a build warning when CONFIG_PM is disabled since the only callers of exynos_lpass_disable are under an #ifdef: drivers/mfd/exynos-lpass.c:93:13: error: 'exynos_lpass_disable' defined but not used [-Werror=unused-function] static void exynos_lpass_disable(struct exynos_lpass *lpass) This removes the #ifdef and replaces it with __maybe_unused annotations so the compiler can leave out the unused code silently with less room for mistakes. Fixes: 36c26760bba8 ("mfd: Add Samsung Exynos Low Power Audio Subsystem driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel-lpss: Add default I2C device properties for Apollo LakeJarkko Nikula2-9/+33
Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI. The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake: i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration Fix this by using different default device properties on Apollo Lake than Broxton. Reported-by: Paul Liu <paul.liu@canonical.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181 Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl-core: Make it explicitly non-modularPaul Gortmaker1-8/+1
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config TWL4030_CORE drivers/mfd/Kconfig: bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" ...meaning that it currently is not being built as a module by anyone. Lets remove what modular code that we can, so that when reading the driver there is less doubt that it is builtin-only. Note that we can't remove the twl_remove() itself ; it is still used by the probe unwind routine. So we leave it linked into the .remove as well, even though it will most likely never be called via that path from an unbind. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: sun6i-prcm: Make it explicitly non-modularPaul Gortmaker1-6/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_SUN6I_PRCM drivers/mfd/Kconfig: bool "Allwinner A31 PRCM controller" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: smsc-ece1099: Make it explicitly non-modularPaul Gortmaker1-9/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_SMSC drivers/mfd/Kconfig: bool "SMSC ECE1099 series chips" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We replace module.h with init.h and delete an unused moduleparam.h include. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel_msic: Make it explicitly non-modularPaul Gortmaker1-7/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_INTEL_MSIC drivers/mfd/Kconfig: bool "Intel MSIC ...meaning that it currently is not being built as a module by anyone. Lets remove the couple instances of module references, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: as3722: Convert MFD_AS3722 from bool to tristatePaul Gortmaker1-1/+1
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_AS3722 drivers/mfd/Kconfig: bool "ams AS3722 Power Management IC" ...meaning that it currently is not being built as a module by anyone. In response to an earlier patch set suggesting removal of the unused modular code, Laxman suggested that this driver be instead moved to tristate. We do that here, and confirm it can build and modpost as a tristate. However there remains to be runtime testing in order to ensure this change is 100% functional for "=m". Cc: Florian Lobmaier <florian.lobmaier@ams.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: altera-a10sr: Make it explicitly non-modularPaul Gortmaker1-8/+6
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_ALTERA_A10SR drivers/mfd/Kconfig: bool "Altera Arria10 DevKit System Resource chip" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since builtin_driver() uses the same init level priority as module_spi_driver() the init ordering remains unchanged with this commit. [Note that there is no builtin_spi_driver macro, so we open-code what it would be via builtin_driver().] Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: tps65217: Add power button as subdeviceMarcin Niestroj1-0/+10
Add tps65217 power buttor subdevice with assigned IRQ resources. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: tps65217: Add support for IRQsMarcin Niestroj2-8/+188
Add support for handling IRQs: power button, AC and USB power state changes. Mask and interrupt bits are shared within one register, which prevents us to use regmap_irq implementation. New irq_domain is created in order to add interrupt handling for each tps65217's subsystem. IRQ resources have been added for charger subsystem to be able to notify about AC and USB state changes. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: sm501: Constify gpio_chip structuresJulia Lawall1-1/+1
These structures are only used to copy into other structures, so declare them as const. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct gpio_chip i@p = { ... }; @ok@ identifier r.i; expression e; position p; @@ e = i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct gpio_chip e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct gpio_chip i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ucb1x00: Remove NO_IRQ checkArnd Bergmann1-1/+1
probe_irq_off() returns '0' on failure, not NO_IRQ, so the check in this driver is clearly wrong. This replaces it with the regular '!irq' check used in other drivers. The sa1100 platform that this driver is used on originally numbered all its interrupts starting at '0', which would have conflicted with this change, but as of commit 18f3aec ("ARM: 8230/1: sa1100: shift IRQs by one"), this is not a problem any more. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl6040: The chip does not support bulk accessPeter Ujfalusi1-0/+1
Bulk access is not working with twl6040, we need to use single register access. Bulk access would happen when we try to sync the regcache after power on. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Use suspend_noirq inplace of suspend_lateCharles Keepax1-6/+4
As runtime PM doesn't function whilst processing system suspend/resume operations and the Arizona IRQ handlers need runtime PM to function we must disable IRQs during these operations. Whilst this is already done in the driver we are using suspend/suspend_late and resume/resume_noirq to do so which has two problems. Firstly, as suspend_late is before suspend_noirq that means we still have a small window where an IRQ can cause issues. Secondly, if another suspend_late handler fails after ours has run then (as resume_noirq will not run) we will make unbalanced calls to enable_irq. This is all simply fixed by using the suspend_noirq callback rather than suspend_late. Whilst we are doing this tidy the code up a little, and use the appropriate helper macros. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: act8945a: Add .of_compatible for act8945a-chargerWenyou Yang1-0/+1
To regard the act8945a-charger as a sub-device, add .of_compatible for act8945a-charger cell. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Add sensible return value to some error pathsCharles Keepax1-1/+4
There are some cases in arizona_dev_init, such as where we don't recognise the chip ID, in which we head to the error path without setting a sensible error code in ret. This would lead to the chip silently failing probe, as it would still return 0. Fix this up by adding appropriate sets of the return value. Whilst adding these update the existing paths that do return an error when the chip is not recognised to use ENODEV, which seems like a better fit. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: Add Samsung Exynos Low Power Audio Subsystem driverSylwester Nawrocki3-0/+196
This patch adds common driver for the Top block of the Samsung Exynos SoC Low Power Audio Subsystem. This is a minimal driver which prepares resources for IP blocks like I2S, audio DMA and UART and exposes a regmap for the Top block registers. Also system power ops are added to ensure the Audio Subsystem is operational after system suspend/resume cycle. Signed-off-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: da9053: Ensure the FAULT_LOG is cleared during MFD driver probeSteve Twiss1-0/+51
The function da9052_clear_fault_log() is added to mitigate the case of persistent data being transferred between reboots. Clearance of any the persistent information within the DA9053 FAULT_LOG register must be completed during start-up so the fault-log does not continue with previous values. A clearance function has been added here in the kernel driver because wiping the fault-log cannot be counted on outside the Linux kernel. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Adam Thomson <adam.thomson.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: dm355evm_msp: Refactoring for add_child()Markus Elfring1-8/+9
Adjust jump targets according to the Linux coding style convention. Another check for the variable "status" can be omitted then at the end. Link: https://lkml.kernel.org/g/<20160628163146.GG29166@dell> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: rtsx_usb: Avoid setting ucr->current_sg.statusLu Baolu1-5/+5
Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: stable@vger.kernel.org # 3.14+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ucb1x00: Allow IRQ probing to work with IRQs > 32Russell King1-4/+0
probe_irq_on() only returns non-zero if it found any interrupts below IRQ32 which could be probe candidates. If all the probable interrupts are higher than 32, then this will cause a failure. Fix this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: qcom_rpm: Handle message RAM clockLinus Walleij1-0/+20
The MSM8660, APQ8060, IPQ806x and MSM8960 have a GCC clock to the message RAM used by the RPM. This needs to be enabled for messages to pass through. This is a crude solution that simply prepare/enable at probe() and disable/unprepare at remove(). More elaborate PM is probably possible to add later. The construction uses IS_ERR() to gracefully handle the platforms that do not provide a message RAM clock. It will bail out of probe only if the clock is hitting a probe deferral situation. Of course this requires the proper device tree set-up: rpm: rpm@104000 { compatible = "qcom,rpm-msm8660"; clocks = <&gcc RPM_MSG_RAM_H_CLK>; clock-names = "ram"; ... }; I have provided this in the MSM8660 device tree, and will provide patches for the other targets. Cc: Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max14577: Change Krzysztof Kozlowski's email to kernel.orgKrzysztof Kozlowski1-2/+2
Change my email address to kernel.org instead of Samsung one for the purpose of any future contact. The copyrights remain untouched and are attributed to Samsung. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc deviceBin Gao1-1/+22
The Intel Whiskey Cove PMIC includes several function units, e.g. ADC, thermal, USB Type-C, GPIO, etc. The corresponding device has to be created in the mfd driver(intel_soc_pmic_bxtwc.c). This change adds the USB Type-c device. Signed-off-by: Bin Gao <bin.gao@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDsMika Westerberg1-0/+23
Intel Kaby Lake PCH-H has the same LPSS than Intel Sunrisepoint. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: altera-a10sr: Make altr_a10sr_regmap_config static constAxel Lin1-1/+1
It's only used in this driver and never get modified, make it static const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: wm8350-i2c: Make sure the i2c regmap functions are compiledUwe Kleine-König1-0/+1
This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b86a9f ("mfd: Add regmap cache support for wm8350") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: da9063: Update author information to remove incorrect e-mail addressesSteve Twiss3-5/+6
Remove incorrect e-mail addresses from the copyright header and MODULE_AUTHOR() macro. These e-mail addresses are no longer in use. The author names have not been changed, only the e-mail addresses have been deleted from the source files. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: axp20x: Add AXP209 GPIO supportMaxime Ripard1-0/+3
Now that we have a GPIO driver for the AXP209, we can add it to our MFD. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: qcom_rpm: Add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+1
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', ↵Lee Jones11-38/+669
'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged
2016-10-04mfd: arizona: Add gating of external MCLKn clocksSylwester Nawrocki1-2/+28
This patch adds requesting of the clocks supplied on MCLK1, MCLK2 pins, gating of the 32k clock is added to the arizona_clk32k_enable(), arizona_clk32k_disable() helpers. It's a temporary change until the CODEC's clock controller gets exposed through the clk API and is helpful for board configurations where the MCLK clocks are not provided by always on oscillators. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-09-29mfd: lpc_ich: Do not create iTCO watchdog when WDAT table existsMika Westerberg1-0/+4
ACPI WDAT table is the preferred way to use hardware watchdog over the native iTCO_wdt. Windows only uses this table for its hardware watchdog implementation so we should be relatively safe to trust it has been validated by OEMs Prevent iTCO watchdog creation if we detect that there is ACPI WDAT table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>