Age | Commit message (Collapse) | Author | Files | Lines |
|
Prevent accesses to the device (register read/write) from debugfs entries
during reset as that can cause the device to get stuck.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
During hard-reset, there can be multiple events received from the H/W. For
each event, the driver opens a worker thread to handle it. For some of the
events, the driver will read/write registers in the code that handles the
event.
In case of hard-reset, we must prevent reads/writes to the registers during
the reset operation because the device might get stuck if that happens.
Therefore, flush the EQ workers before resetting the device (in hard-reset
only). Additional events won't arrive as we synced and disabled the
interrupts.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
In the hl_device_reset we ask about the hard_reset argument when we want to
differentiate between soft and hard reset, except for three places where
we use "from_hard_reset_thread". Replace one of those locations with the
hard_reset argument as it is guaranteed that if we reached to that
line in the code during hard_reset, it is from a kernel thread.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
Expose both soft and hard reset counts via INFO IOCTL.
This will allow system management applications to easily check
if the device has undergone reset.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Instead of doing if inside if, just write them with && operator.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Make the code more concise and maintainable by using defines for the F/W
files.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Successful device initialization is mentioned in kernel log with the
message "Successfully added device to habanalabs driver". There is no point
of spamming the log with additional messages about successful queue
testing, which are implied by the above mentioned message.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Now that the VA block free list is not updated on context close in order
to optimize this flow, no need in the sanity checks of the list contents
as these will fail for sure.
In addition, remove the "context closing with VA in use" print during hard
reset as this situation is a side effect of the failure that caused the
hard reset.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Reduce context close time by performing MMU cache invalidation once at the
end of the unmap loop rather in each iteration, in order to avoid hard
reset with open contexts.
Reset with open contexts can potentially lead to a kernel crash as the
generic pool of the MMU hops is destroyed while it is not empty because
some unmap operations are not done.
The commit affect mainly when running on simulator.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Reduce context close time by skipping the VA block free list update in
order to avoid hard reset with open contexts.
Reset with open contexts can potentially lead to a kernel crash as the
generic pool of the MMU hops is destroyed while it is not empty because
some unmap operations are not done.
The commit affect mainly when running on simulator.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Reduce context close time by skipping hash table lookup if possible in
order to avoid hard reset with open contexts.
Reset with open contexts can potentially lead to a kernel crash as the
generic pool of the MMU hops is destroyed while it is not empty because
some unmap operations are not done.
This commit affect mainly when running on simulator.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
During hard reset we should not access the device except of necessary
reset operations because the device might be stuck or unresponsive.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Split the properties used for MMU mappings to DRAM and PCI (host) types.
This is a prerequisite for future ASICs support.
Note that in Goya ASIC, the PMMU and DMMU are the same (except of page
sizes) as only one MMU mechanism is used for both of the mapping types.
Hence this patch should not have any effect on current behavior.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Some cosmetics around the MMU code to make it more self-explanatory.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add the ability to invalidate the necessary MMU cache only.
This ability is a prerequisite for future ASICs support.
Note that in Goya ASIC, a single cache is used for both host/DRAM
mappings and hence this patch should not have any effect on current
behavior.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Some of the functions in the memory module code were too long and/or
contained multiple operations that are not always done together. Re-factor
the code by dividing those functions to smaller functions which are more
readable and maintainable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The two defines that control the maximum size of a command buffer and the
maximum number of JOBS per CS need to be exported to the user as they are
part of the API towards user-space.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
If the queues are full and we return -EAGAIN to the user, there is no need
to print an error, as that case isn't an error and the user is expected to
re-submit the work.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
In training, there is a need for a large amount of patching to the recipe.
This results in many command buffers contains a lot of DMA packets. The
number of command buffers per CS is larger than the current maximum of 64,
which is an arbitrary number that is enough for inference, but it has no
real affect on the code and/or resources of the host machine.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
ETR should always be non-secured as it is used by the users to record
profiling/trace data.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
We have a single ETR block in the SOC, so use explicit register
name defines for initializing this block. This makes it more readable and
maintainable.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Move the read of the F/W boot versions before exiting on possible failures
of the F/W boot. This will help debug boot failures as we will be able to
know the F/W boot version.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
To enable userspace processes, e.g. management utilities, to display the
card name to the user, add the card name property to the HW_IP
structure that is copied to the user in the INFO IOCTL.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/misc/habanalabs/goya/goya.c: In function 'goya_init_mme_cmdq':
drivers/misc/habanalabs/goya/goya.c:1536:6: warning:
variable 'qman_base_addr' set but not used [-Wunused-but-set-variable]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add a new opcode to the INFO IOCTL to allow the user application to
retrieve the ASIC's current and maximum clock rate. The rate is
returned in MHz.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
Reduce latency to memory during TPC kernel execution.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
This patch adds a support for a new H/W queue type.
This type of queue is for DMA and compute engines jobs, for which
completion notification are sent by H/W.
Command buffer for this queue can be created either through the CB
IOCTL and using the retrieved CB handle, or by preparing a buffer on the
host or device SRAM/DRAM, and using the device address to that buffer.
The patch includes the handling of the 2 options, as well as the
initialization of the H/W queue and its jobs scheduling.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Jobs on some queues must be provided with a handle to a driver command
buffer object, while for other queues, jobs must be provided with an
address to a command buffer.
Currently the distinction is done based on the queue type, which is less
flexible if the same queue type behaves differently on different
types of ASICs.
This patch adds a new queue property for this target, which is
configured per queue type per ASIC type.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
s/paerser/parser/
s/requeusted/requested/
s/an JOB/a JOB/
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/misc/habanalabs/device.c: In function hpriv_release:
drivers/misc/habanalabs/device.c:45:17: warning: variable ctx set but not used [-Wunused-but-set-variable]
It is never used since commit eb7caf84b029 ("habanalabs:
maintain a list of file private data objects")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In case the F/W fails to initialize the thermal sensors, print an
appropriate error message to kernel log and fail the device
initialization.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
When using the macro le32_to_cpu(x), we need to correctly convert x to be
__le32 in case it is defined as u32 variable.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
If the initialization of a device failed, the driver prints an error
message with the id of the device. The device index on the file system is
that id divided by 2.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
We want to stop using the acronym KMD. Therefore, replace all locations
(except for register names we can't modify) where KMD is written to other
terms such as "Linux kernel driver" or "Host kernel driver", etc.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
To allow the user to use a custom file for the HWMON lm-sensors library
per card type, the driver needs to register the HWMON sensors with the
specific card type name.
The card name is supplied by the F/W running on the device. If the F/W is
old and doesn't supply a card name, a default card name is displayed as
the sensors group name.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Add a new opcode to INFO IOCTL to retrieve aggregate H/W events. i.e. the
events counters are NOT cleared upon device reset, but count from the
loading of the driver.
Add the code to support it in the device event handling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
The Coresight timestamp is enabled for a specific debug session using
the HL_DEBUG_OP_TIMESTAMP opcode of the debug IOCTL.
In order to have a perpetual timestamp that would be comparable between
various debug sessions, this patch moves the timestamp enablement to be
part of the HW initialization.
The HL_DEBUG_OP_TIMESTAMP opcode turns to be deprecated and shouldn't be
used. Old user-space that will call it won't see any change in the
behavior of the debug session.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Now that we don't print the queue testing messages, we need to print when
the reset is finished so whoever looks at the kernel log will know the
reset process was finished successfully and the driver is not stuck.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some files the driver uses __le32_to_cpu while in other it uses
le32_to_cpu. Replace all __le32_to_cpu instances with le32_to_cpu for
consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In some files the code use __cpu_to_le32/64 while in other it use
cpu_to_le32/64. Replace all __cpu_to_le32/64 instances with
cpu_to_le32/64 for consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The HW IP information is relevant even if the device is disabled or in
reset, so always handle the corresponding INFO IOCTL opcode.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The char devices are currently exposed to user before the device and
driver initialization are done.
This patch moves the cdev and device adding to the system to the end of
the initialization sequence, while keeping the creation of the
structures at the beginning to allow the usage of dev_*().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch improves the security in the Debug IOCTL.
It adds checks that:
- The register index value is in the allowed range for all opcodes.
- The event types number is in the allowed range in SPMU enable.
- The events number is in the allowed range in SPMU disable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch fixes a possible kernel crash when a user provides a too small
input structure to the Debug IOCTL.
The fix sets a default input structure and copies to it the user data.
In case the user provided as input a too small structure, the code will
use the default values taken from the default structure.
Note that in contrary to the input structure, the user can provide an
output structure with changing size or no size at all. Therefore the user
output structure validation is already done in the Debug logic later on.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add a meaningful name to the general PSOC application status register
which better describes its usage in keeping the HW state.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The PSOC scratch-pad registers are used for communication with the
device CPU. This patch adds new definitions for these registers which
are more descriptive than their general names.
The new set of definitions also gathers and documents the current usage
of the scratch-pad registers by the driver and the device CPU.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch changes the driver to create two char devices for each ASIC
it discovers. This is done to allow system/monitoring applications to
query the device for stats, information, idle state and more, while also
allowing the deep-learning application to send work to the ASIC.
One char device is the original device, hlX. IOCTL calls through this
device file can perform any task on the device (compute, memory, queries).
The open function for this device will fail if it was called before but
the file-descriptor it created was not completely released yet (the
release callback function is not called from the kernel until all
instances of that FD are closed). The driver needs to keep this behavior
to support backward compatibility with existing userspace, which count
that the open will fail if the device is "occupied".
The second char device is called "hl_controlDx", where x is the same index
of the main device with a minor number of the original char device + 1.
Applications that open this device can only call the INFO IOCTL. There is
no limitation on the number of applications opening this device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch re-factors the device_setup_cdev() function to make it more
generic. It doesn't manipulate members of the driver's internal device
structure but instead works only on the arguments that are sent to it.
This is in preparation for using this function to create an additional
char device per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a new list to the driver's device structure. The list will
keep the file private data structures that the driver creates when a user
process opens the device.
This change is needed because it is useless to try to count how many FD
are open. Instead, track our own private data structure per open file and
once it is released, remove it from the list. As long as the list is not
empty, it means we have a user that can do something with our device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|