summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/cs553x_nand.c
AgeCommit message (Collapse)AuthorFilesLines
2021-05-10mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helperMiquel Raynal1-1/+11
Since the Hamming software ECC engine has been updated to become a proper and independent ECC engine, it is now mandatory to either initialize the engine before using any one of his functions or use one of the bare helpers which only perform the calculations. As there is no actual need for a proper ECC initialization, let's just use the bare helper instead of the rawnand one. Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210413161840.345208-2-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Rename the exported functionsMiquel Raynal1-2/+1
Prefix by ecc_sw_hamming_ the functions which should be internal only but are exported for "raw" operations. Prefix by nand_ecc_sw_hamming_ the other functions which will be used in the context of the declaration of an Hamming proper ECC engine object. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-16-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Move Hamming code to the generic NAND layerMiquel Raynal1-1/+1
Hamming ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-12-miquel.raynal@bootlin.com
2020-11-19mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()Miquel Raynal1-8/+16
The probe function is only supposed to initialize the controller hardware but not the ECC engine. Indeed, we don't know anything about the NAND chip(s) at this stage. Let's move the logic initializing the ECC engine, even pretty simple, to the ->attach_chip() hook which gets called during nand_scan() routine, after the NAND chip discovery. As the previously mentioned logic is supposed to parse the DT for us, it is likely that the chip->ecc.* entries be overwritten. So let's avoid this by moving these lines to ->attach_chip(). Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal1-1/+1
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
2020-05-31mtd: rawnand: cs553x: Stop using nand_release()Miquel Raynal1-1/+4
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-9-miquel.raynal@bootlin.com
2020-05-11mtd: rawnand: cs553x: Get rid of the legacy interface implementationBoris Brezillon1-72/+0
Now that exec_op() is implemented we no longer need to implement the legacy hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200501090650.1138200-5-boris.brezillon@collabora.com
2020-05-11mtd: rawnand: cs553x: Implement exec_op()Boris Brezillon1-1/+125
So we can later get rid of the legacy hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200501090650.1138200-4-boris.brezillon@collabora.com
2020-05-11mtd: rawnand: cs553x: Stop using chip->legacy.IO_ADDR_{R, W}Boris Brezillon1-23/+34
Now that we have our own controller struct we can keep the MMIO pointer in there and use instead of using the chip->legacy.IO_ADDR_{R,W} fields. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200501090650.1138200-3-boris.brezillon@collabora.com
2020-05-11mtd: rawnand: cs553x: Declare controllers instead of NAND chipsBoris Brezillon1-11/+22
The CS553x companion chip embeds 4 NAND controllers. Declare them as NAND controllers instead of NAND chips. That's done in preparation of the transition to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200501090650.1138200-2-boris.brezillon@collabora.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon1-1/+1
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon1-1/+1
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon1-3/+3
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Create a legacy struct and move ->IO_ADDR_{R, W} thereBoris Brezillon1-15/+15
We regularly have new NAND controller drivers that are making use of fields/hooks that we want to get rid of but can't because of all the legacy drivers that we might break if we do. So, instead of removing those fields/hooks, let's move them to a sub-struct which is clearly documented as deprecated. We start with the ->IO_ADDR_{R,W] fields. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->dev_ready()Boris Brezillon1-2/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->dev_ready() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon1-2/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon1-6/+3
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon1-5/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->calculate()Boris Brezillon1-2/+2
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->calculate()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->hwctl()Boris Brezillon1-2/+1
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one. Now is ecc->hwctl()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon1-1/+1
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-20mtd: rawnand: use mtd_device_register() where applicableRafał Miłecki1-2/+1
If driver doesn't specify parsers it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-15mtd: rawnand: Replace printk() with appropriate pr_*() macroShreeya Patel1-4/+5
Using pr_<loglevel>() is more concise than printk(KERN_<LOGLEVEL>). Replace printks having a log level with the appropriate pr_*() macros. Define pr_fmt() and remove other additional macros from the replaced printks. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon1-0/+355
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-15 09:39:16 +0300