summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29mtd: hyperbus: fix dependency and build errorRandy Dunlap1-0/+1
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so MTD_HYPERBUS should depend on HAS_IOMEM. Fixes a build error and a Kconfig warning (as seen on UML builds): WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=m] && HAS_IOMEM [=n] Selected by [m]: - MTD_HYPERBUS [=m] && MTD [=m] ERROR: "devm_ioremap_resource" [drivers/mtd/hyperbus/hyperbus-core.ko] undefined! Fixes: dcc7d3446a0f ("mtd: Add support for HyperBus memory devices") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mtd@lists.infradead.org Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-21mtd: sa1100: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: assabet_defconfig arm): drivers/mtd/maps/sa1100-flash.c: In function ‘sa1100_probe_subdev’: drivers/mtd/maps/sa1100-flash.c:82:3: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_WARNING "SA1100 flash: unknown base address " ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "0x%08lx, assuming CS0\n", phys); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/maps/sa1100-flash.c:85:2: note: here case SA1100_CS0_PHYS: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-13mtd: spi-nor: Fix the disabling of write protection at initTudor Ambarus1-2/+3
spi_nor_spansion_clear_sr_bp() depends on spansion_quad_enable(). While spansion_quad_enable() is selected as default when initializing the flash parameters, the nor->quad_enable() method can be overwritten later on when parsing BFPT. Select the write protection disable mechanism at spi_nor_init() time, when the nor->quad_enable() method is already known. Fixes: 191f5c2ed4b6faba ("mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-05Merge tag 'mtd/fixes-for-5.3-rc3' of ↵Linus Torvalds2-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "NAND: - Fix Micron driver as some chips enable internal ECC correction during their discovery while they advertize they do not have any. Hyperbus: - Restrict the build to only ARM64 SoCs (and compile testing) which is what should have been done since the beginning. - Fix Kconfig issue by selection something instead of implying it" * tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: Add hardware dependency to AM654 driver mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
2019-08-03mtd: hyperbus: Add hardware dependency to AM654 driverJean Delvare1-0/+1
The hbmc-am654 driver is for the TI AM654, which is an ARM64 SoC, so don't propose this driver on other architectures unless build-testing. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-03mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependenciesVignesh Raghavendra1-1/+1
On x86_64, when CONFIG_OF is not disabled: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=y] && (OF [=n] || COMPILE_TEST [=n]) Selected by [y]: - HBMC_AM654 [=y] && MTD [=y] && MTD_HYPERBUS [=y] due to config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" select MULTIPLEXER select MUX_MMIO Fix this by making HBMC_AM654 imply MUX_MMIO instead of select so that dependencies are taken care of. MUX_MMIO is optional for functioning of driver. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-03mtd: rawnand: micron: handle on-die "ECC-off" devices correctlyMarco Felsch1-3/+11
Some devices are not supposed to support on-die ECC but experience shows that internal ECC machinery can actually be enabled through the "SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter Tables" returns that it is not. Currently, the driver checks the "READ ID Parameter" field directly after having enabled the feature. If the check fails it returns immediately but leaves the ECC on. When using buggy chips like MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will go through the on-die ECC, confusing the host controller which is supposed to be the one handling correction. To address this in a common way we need to turn off the on-die ECC directly after reading the "READ ID Parameter" and before checking the "ECC status". Cc: stable@vger.kernel.org Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-26mtd: onenand_base: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’: drivers/mtd/nand/onenand/onenand_base.c:3264:17: warning: this statement may fall through [-Wimplicit-fallthrough=] this->options |= ONENAND_HAS_NOP_1; drivers/mtd/nand/onenand/onenand_base.c:3265:2: note: here case ONENAND_DEVICE_DENSITY_4Gb: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Cc: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-15docs: mtd: move it to the driver-api bookMauro Carvalho Chehab1-1/+1
While I was tempted to move it to admin-guide, as some docs there are more userspace-faced, there are some very technical discussions about memory error correction code from the Kernel implementer's PoV. So, let's place it inside the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: mtd: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the mtd documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. It should be noticed that Sphinx doesn't handle very well URLs with dots in the middle. Thankfully, internally, the '.' char is translated to %2E, so we can jus use %2E instead of dots, and this will work fine on both text and processed files. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-14Merge tag 'mtd/for-5.3' of ↵Linus Torvalds34-2427/+2334
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-07Merge tag 'spi-nor/for-5.3-v2' of ↵Miquel Raynal9-747/+60
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control
2019-07-07mtd: concat: implement _is_locked mtd operationChris Packham1-0/+23
Add an implementation of the _is_locked operation for concatenated mtd devices. This doesn't handle getting the lock status of a range that spans chips, which is consistent with cfi_ppb_is_locked and cfi_intelext_is_locked which only look at the first block in the range. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-07mtd: concat: refactor concat_lock/concat_unlockChris Packham1-32/+12
concat_lock() and concat_unlock() only differed in terms of the mtd_xx operation they called. Refactor them to use a common helper function and pass a boolean flag to indicate whether lock or unlock is needed. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-07mtd: afs: remove unneeded NULL checkDing Xiang1-2/+1
NULL check before kfree is unneeded, so remove it. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-06Merge tag 'nand/for-5.3' of ↵Richard Weinberger136-2685/+1928
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: * fix BCH ECC layout for large page NAND parts * fallback to detected ecc-strength, ecc-step-size * when oops in progress use pio and interrupt polling * code refactor code to introduce helper functions * add support for v7.3 controller - FSMC: * use nand_op_trace for operation tracing - GPMI: * move all driver code into single file * various cleanups (including dmaengine changes) * use runtime PM to manage clocks * implement exec_op - MTK: * correct low level time calculation of r/w cycle * improve data sampling timing for read cycle * add validity check for CE# pin setting * fix wrongly assigned OOB buffer pointer issue * re-license MTK NAND driver as Dual MIT/GPL - STM32: * manage the get_irq error case * increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips
2019-07-05mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configurationMiquel Raynal1-0/+24
Allwinner NAND controllers can make use of DMA to enhance the I/O throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP is a bit different than with the older SoCs, hence the introduction of a new compatible to handle: * the differences between register offsets, * the burst length change from 4 to minimum 8, * manage SRAM accesses through MBUS with extra configuration. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-05Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"Miquel Raynal1-36/+2
This reverts commit c49836f05aa15282f7280e06ede3f6f8a6324833. The commit is wrong and its approach actually does not work. Let's revert it in order to add the feature with a clean patch. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-01mtd: rawnand: ingenic: Fix ingenic_ecc dependencyPaul Cercueil4-11/+4
If MTD_NAND_JZ4780 is y and MTD_NAND_JZ4780_BCH is m, which select CONFIG_MTD_NAND_INGENIC_ECC to m, building fails: drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_remove': ingenic_nand.c:(.text+0x177): undefined reference to `ingenic_ecc_release' drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_ecc_correct': ingenic_nand.c:(.text+0x2ee): undefined reference to `ingenic_ecc_correct' To fix that, the ingenic_nand and ingenic_ecc modules have been fused into one single module. - The ingenic_ecc.c code is now compiled in only if $(CONFIG_MTD_NAND_INGENIC_ECC) is set. This is now a boolean instead of tristate. - To avoid changing the module name, the ingenic_nand.c file is moved to ingenic_nand_drv.c. Then the module name is still ingenic_nand. - Since ingenic_ecc.c is no more a module, the module-specific macros have been dropped, and the functions are no more exported for use by the ingenic_nand driver. Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Hulk Robot <hulkci@huawei.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-01mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorgFrieder Schrempf2-3/+3
The 1Gb Macronix chip can have a maximum of 20 bad blocks, while the 2Gb version has twice as many blocks and therefore the maximum number of bad blocks is 40. The 4Gb GigaDevice GD5F4GQ4xA has twice as many blocks as its 2Gb counterpart and therefore a maximum of 80 bad blocks. Fixes: 377e517b5fa5 ("mtd: nand: Add max_bad_eraseblocks_per_lun info to memorg") Reported-by: Emil Lenngren <emil.lenngren@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: stm32_fmc2: increase DMA completion timeoutsAmelie Delaunay1-6/+9
When the system is overloaded, DMA data transfer completion occurs after 100ms. Increase the timeouts to let it the time to complete. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()Fuqian Huang1-2/+1
Replace kmalloc() by a memset() followed with a kzalloc(). There is a recommendation to use zeroing allocator rather than allocator followed by memset(0) in ./scripts/coccinelle/api/alloc/zalloc-simple.cocci Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: hyperbus: Add driver for TI's HyperBus memory controllerVignesh Raghavendra3-0/+160
Add driver for HyperBus memory controller on TI's AM654 SoC. Programming IP is pretty simple and provides direct memory mapped access to connected Flash devices. Add basic support for the IP without DMA. Second chip-select is not supported for now. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: spinand: read returns badly if the last page has bitflipsliaoweixiong1-1/+1
In case of the last page containing bitflips (ret > 0), spinand_mtd_read() will return that number of bitflips for the last page while it should instead return max_bitflips like it does when the last page read returns with 0. Signed-off-by: Weixiong Liao <liaoweixiong@allwinnertech.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: stable@vger.kernel.org Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add initial support for Paragon PN26G0xAJeff Kletsky3-1/+149
Add initial support for Paragon Technology PN26G01Axxxxx and PN26G02Axxxxx SPI NAND Datasheets available at http://www.xtxtech.com/upfile/2016082517274590.pdf http://www.xtxtech.com/upfile/2016082517282329.pdf Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPLXiaolei Li3-7/+5
It is wanted to use MTK NAND driver with GPL-2.0 or MIT license. But now it is only licensed as GPL-2.0, so re-license it as dual MIT/GPL. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Acked-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Wen Yang <yellowriver2010@hotmail.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: RogerCC Lin <rogercc.lin@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove double assignment to block_sizeColin Ian King1-1/+1
The variable block_size is being assigned to itself and to geo->ecc_chunk_size. Clean up the double assignment by removing the assignment to itself. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu1-22/+80
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu1-38/+62
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: When oops in progress use pio and interrupt pollingKamal Dasu1-3/+45
If mtd_oops is in progress, switch to polling during NAND command completion instead of relying on DMA/interrupts so that the mtd_oops buffer can be completely written in the assigned NAND partition. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: Add flag to indicate panic_writeKamal Dasu1-0/+3
Added a flag to indicate a panic_write so that low level drivers can use it to take required action where applicable, to ensure oops data gets written to assigned mtd device. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: Add Macronix NAND read retry supportMason Yang1-0/+45
Add support for Macronix NAND read retry. Macronix NANDs support specific read operation for data recovery, which can be enabled with a SET_FEATURE. Driver checks byte 167 of Vendor Blocks in ONFI parameter page table to see if this high-reliability function is supported. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: onenand: Avoid fall-through warningsGustavo A. R. Silva1-0/+3
NOTICE THAT: "...we don't know whether we need fallthroughs or breaks here and this is just a change to avoid having new warnings when switching to -Wimplicit-fallthrough but this change might be entirely wrong."[1] See the original thread of discussion here: https://lore.kernel.org/patchwork/patch/1036251/ So, in preparation to enabling -Wimplicit-fallthrough, this patch silences the following warnings: drivers/mtd/nand/onenand/onenand_base.c: In function ‘onenand_check_features’: drivers/mtd/nand/onenand/onenand_base.c:3264:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ONENAND_IS_DDP(this)) ^ drivers/mtd/nand/onenand/onenand_base.c:3284:2: note: here case ONENAND_DEVICE_DENSITY_2Gb: ^~~~ drivers/mtd/nand/onenand/onenand_base.c:3288:17: warning: this statement may fall through [-Wimplicit-fallthrough=] this->options |= ONENAND_HAS_UNLOCK_ALL; drivers/mtd/nand/onenand/onenand_base.c:3290:2: note: here case ONENAND_DEVICE_DENSITY_1Gb: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Also, notice that this patch doesn't change any functionality. See the most recent thread of discussion here: https://lore.kernel.org/patchwork/patch/1077395/ This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. [1] https://lore.kernel.org/lkml/20190509085318.34a9d4be@xps13/ Cc: Miquel Raynal <miquel.raynal@bootlin.com> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxGJeff Kletsky1-15/+64
The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices and, while it has the same logical layout as the E-series devices, it differs in the SPI interfacing in significant ways. This support is contingent on previous commits to: * Add support for two-byte device IDs * Define macros for page-read ops with three-byte addresses http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/ Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: spinand: Add support for two-byte device IDsJeff Kletsky1-1/+1
The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs. http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/ Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: fallback to detected ecc-strength, ecc-step-sizeKamal Dasu1-0/+11
This change supports nand-ecc-step-size and nand-ecc-strength fields in brcmnand DT node to be optional. see: Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt If both nand-ecc-strength and nand-ecc-step-size are not specified in device tree node for NAND, raw NAND layer does detect ECC information by reading ONFI extended parameter page for parts using ONFI >= 2.1. In case of non-ONFI NAND parts there could be a nand_id table entry with ECC information. If there is valid device tree entry for nand-ecc-strength and nand-ecc-step-size fields it still shall override the detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Implement exec_opSascha Hauer2-690/+440
The gpmi driver performance suffers from NAND operations being split in multiple small DMA transfers. This has been forced by the NAND layer in the former days, but now with exec_op we can use the controller as intended. With this patch gpmi_nfc_exec_op becomes the main entry point to NAND operations. Here all instructions are collected and chained as separate DMA transfers. In the end whole chain is fired and waited to be finished. gpmi_nfc_exec_op only does the hardware operations, bad block marker swapping and buffer scrambling is done by the callers. It's worth noting that the nand_*_op functions always take the buffer lengths for the data that the NAND chip actually transfers. When doing BCH we have to calculate the net data size from the raw data size in some places. This patch has been tested with 2048/64 and 2048/128 byte NAND on i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests from mtdutils run without errors and UBIFS can successfully be mounted. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: rename custom flagSascha Hauer1-6/+11
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Add header file to be shared with gpmi nand driverSascha Hauer1-22/+14
The mxs dma driver can do PIO transfers. A pointer to the PIO words to transfer is passed in the struct scatterlist * argument of dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast u32 * to struct scatterlist * each time when calling dmaengine_prep_slave_sg(), so add a static inline wrapper function to be called by the user along with a description what is going on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: drop unnecessary flagSascha Hauer1-9/+5
The DMA_PREP_INTERRUPT flag is no longer needed by the mxs DMA driver, drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: use runtime PM to manage clocksSascha Hauer1-25/+44
The gpmi driver aggressively en/disables the clocks between operations which has significant performance cost. Use runtime PM to get rid of this bottleneck. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Drop unnecessary restoring of previous chipselectionSascha Hauer1-14/+2
The i.MX23 specific option read code is called right after nand_scan. We can rely on the NAND core having disabled the chipselect, so there's no point in restoring the original chip select after NAND operations. Drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused parametersSascha Hauer1-15/+19
gpmi_ecc_read_page_data uses the page parameter only for a debug printf, so we can drop the parameter and the debug printf. Moving the oob delivery from gpmi_ecc_read_page_data to gpmi_ecc_read_page makes the oob_required parameter unnecessary aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: read buf in nand_read_page_opSascha Hauer1-8/+18
The driver calls nand_read_page_op without a buffer passed and then calls chip->legacy.read_buf to read the buffer afterwards which is the same as passing the buffer nand_read_page_op in the first place. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Remove unnecessary variablesSascha Hauer2-11/+6
this->page_buffer_virt and this->payload_virt are always set to the same value, so drop the former and just use the latter. Same for this->page_buffer_virt and this->payload_virt. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused variableSascha Hauer1-3/+0
The "private" member of struct gpmi_nand_data isn't used anywhere. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: move all driver code into single fileSascha Hauer4-1106/+1058
This moves the whole driver into a single C file. The filename gpmi-lib implies that it implements library functions, but in fact there are several cases where functions in gpmi-lib.c call back into functions in gpmi-nand.c. With this one has to constantly jump between those two files, so moving it into a single file improves readability, even when the file gets quite large. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: fsmc: Use nand_op_trace for operation tracingSascha Hauer1-17/+2
Replace the different operation tracing functions with a call to nand_op_trace. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>