summaryrefslogtreecommitdiff
path: root/drivers/net/caif/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2016-08-02vhost: split out vringh KconfigMichael S. Tsirkin1-1/+1
vringh is pulled in by caif and mic, but the other vhost config does not need to be there. In particular, it makes no sense to have vhost net/scsi/sock under caif/mic. Create a separate Kconfig file and put vringh bits there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-12caif: CAIF_VIRTIO should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `cfv_destroy_genpool': drivers/net/caif/caif_virtio.c:364: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `cfv_create_genpool': drivers/net/caif/caif_virtio.c:397: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio & lguest updates from Rusty Russell: "Lots of virtio work which wasn't quite ready for last merge window. Plus I dived into lguest again, reworking the pagetable code so we can move the switcher page: our fixmaps sometimes take more than 2MB now..." Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename. Hopefully correctly resolved. * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits) caif_virtio: Remove bouncing email addresses lguest: improve code readability in lg_cpu_start. virtio-net: fill only rx queues which are being used lguest: map Switcher below fixmap. lguest: cache last cpu we ran on. lguest: map Switcher text whenever we allocate a new pagetable. lguest: don't share Switcher PTE pages between guests. lguest: expost switcher_pages array (as lg_switcher_pages). lguest: extract shadow PTE walking / allocating. lguest: make check_gpte et. al return bool. lguest: assume Switcher text is a single page. lguest: rename switcher_page to switcher_pages. lguest: remove RESERVE_MEM constant. lguest: check vaddr not pgd for Switcher protection. lguest: prepare to make SWITCHER_ADDR a variable. virtio: console: replace EMFILE with EBUSY for already-open port virtio-scsi: reset virtqueue affinity when doing cpu hotplug virtio-scsi: introduce multiqueue support virtio-scsi: push vq lock/unlock into virtscsi_vq_done virtio-scsi: pass struct virtio_scsi to virtqueue completion function ...
2013-03-20caif_virtio: Introduce caif over virtioErwan Yvin1-0/+14
Add the CAIF Virtio shared memory driver for talking to a modem. This CAIF Link layer communicates to the modem over shared memory. It is implemented as a virtio_driver. The underlying virtio device is managed by the remoteproc framework. The Virtio queue is used for transmitting data to the modem, and the new vringh is used for receiving data. Genalloc is used for managing the shared memory used for TX data. The default dma-alloc-coherent allocator can only allocate whole pages, and this wastes too much shared memory. Flow control is implemented by stopping the TX-queues if the virtio queues go full or we run out of memory. Queued are reopened when queues are below the watermark. NAPI is used in RX path, and a dedicated tasklet is used for releasing TX buffers. Signed-off-by: Erwan Yvin <erwan.yvin@stericsson.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2013-03-17caif: remove caif_shmErwan Yvin1-7/+0
caif_shm is an old implementation caif_shm will be replaced by caif_virtio [ As explained by Linus Walleij: "U5500 used this, but was cancelled and the silicon did not reach anyone outside ST-Ericsson. Then for the next platforms, we have gone for the leaner & cleaner approach of using virtio, rpmesg and rproc." ] Signed-off-by: Erwan Yvin <erwan.yvin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sjur Brendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-19tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach1-1/+1
The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-06-02caif: Add CAIF HSI Link layer driverDmitry.Tarnyagin1-0/+9
This patch introduces the CAIF HSI Protocol Driver for the CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific HSI devices. A general platform driver is not possible as there are no HSI side Kernel API defined. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27caif-u5500: Build config for CAIF shared mem driverAmarnath Revanna1-0/+7
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24caif-driver: add HAS_DMA dependencyHeiko Carstens1-1/+1
Fix this error on an s390 allyesconfig build: linux-2.6/drivers/net/caif/caif_spi.c:98: undefined reference to `dma_free_coherent' Cc: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29caif-driver: Add CAIF-SPI Protocol driver.Sjur Braendeland1-0/+19
This patch introduces the CAIF SPI Protocol Driver for CAIF Link Layer. This driver implements a platform driver to accommodate for a platform specific SPI device. A general platform driver is not possible as there are no SPI Slave side Kernel API defined. A sample CAIF SPI Platform device can be found in .../Documentation/networking/caif/spi_porting.txt Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29caif: Kconfig and Makefile fixesSjur Braendeland1-4/+1
Use "depends on" instead of "if" in Kconfig files. Fixed CAIF debug flag, and removed unnecessary clean-* options. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31net-caif-driver: add CAIF serial driver (ldisc)Sjur Braendeland1-0/+17
Add CAIF Serial driver. This driver is implemented as a line discipline. caif_serial uses the following module parameters: ser_use_stx - specifies if STart of frame eXtension is in use. ser_loop - sets the interface in loopback mode. Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>