summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton1-2/+2
[ Upstream commit 2df3fc4a84e917a422935cc5bae18f43f9955d31 ] It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13bnxt_en: Prevent XDP redirect from running when stopping TX queueRay Jui1-2/+4
[ Upstream commit 27d4073f8d9af0340362554414f4961643a4f4de ] Add checks in the XDP redirect callback to prevent XDP from running when the TX ring is undergoing shutdown. Also remove redundant checks in the XDP redirect callback to validate the txr and the flag that indicates the ring supports XDP. The modulo arithmetic on 'tx_nr_rings_xdp' already guarantees the derived TX ring is an XDP ring. txr is also guaranteed to be valid after checking BNXT_STATE_OPEN and within RCU grace period. Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13bnxt_en: reserve space inside receive page for skb_shared_infoAndy Gospodarek1-1/+2
[ Upstream commit facc173cf700e55b2ad249ecbd3a7537f7315691 ] Insufficient space was being reserved in the page used for packet reception, so the interface MTU could be set too large to still have room for the contents of the packet when doing XDP redirect. This resulted in the following message when redirecting a packet between 3520 and 3822 bytes with an MTU of 3822: [311815.561880] XDP_WARN: xdp_update_frame_from_buff(line:200): Driver BUG: missing reserved tailroom Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13bnxt_en: Synchronize tx when xdp redirects happen on same ringPavan Chebbi4-0/+19
[ Upstream commit 4f81def272de17dc4bbd89ac38f49b2676c9b3d2 ] If there are more CPUs than the number of TX XDP rings, multiple XDP redirects can select the same TX ring based on the CPU on which XDP redirect is called. Add locking when needed and use static key to decide whether to take the lock. Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13bnxt_en: Eliminate unintended link toggle during FW resetMichael Chan1-3/+1
[ Upstream commit 7c492a2530c1f05441da541307c2534230dfd59b ] If the flow control settings have been changed, a subsequent FW reset may cause the ethernet link to toggle unnecessarily. This link toggle will increase the down time by a few seconds. The problem is caused by bnxt_update_phy_setting() detecting a false mismatch in the flow control settings between the stored software settings and the current FW settings after the FW reset. This mismatch is caused by the AUTONEG bit added to link_info->req_flow_ctrl in an inconsistent way in bnxt_set_pauseparam() in autoneg mode. The AUTONEG bit should not be added to link_info->req_flow_ctrl. Reviewed-by: Colin Winegarden <colin.winegarden@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08net: bcmgenet: Use stronger register read/writes to assure orderingJeremy Linton1-2/+2
[ Upstream commit 8d3ea3d402db94b61075617e71b67459a714a502 ] GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems with this commit are targeted at relaxing only the performance critical code paths after assuring proper barriers. Fixes: 69d2ea9c79898 ("net: bcmgenet: Use correct I/O accessors") Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045358.224350-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08net: bnxt_ptp: fix compilation errorDamien Le Moal2-2/+6
commit dcf500065fabe27676dfe7b4ba521a4f1e0fc8ac upstream. The Broadcom bnxt_ptp driver does not compile with GCC 11.2.2 when CONFIG_WERROR is enabled. The following error is generated: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c: In function ‘bnxt_ptp_enable’: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:400:43: error: array subscript 255 is above array bounds of ‘struct pps_pin[4]’ [-Werror=array-bounds] 400 | ptp->pps_info.pins[pin_id].event = BNXT_PPS_EVENT_EXTERNAL; | ~~~~~~~~~~~~~~~~~~^~~~~~~~ In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:20: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h:75:24: note: while referencing ‘pins’ 75 | struct pps_pin pins[BNXT_MAX_TSIO_PINS]; | ^~~~ cc1: all warnings being treated as errors This is due to the function ptp_find_pin() returning a pin ID of -1 when a valid pin is not found and this error never being checked. Change the TSIO_PIN_VALID() function to also check that a pin ID is not negative and use this macro in bnxt_ptp_enable() to check the result of the calls to ptp_find_pin() to return an error early for invalid pins. This fixes the compilation error. Cc: <stable@vger.kernel.org> Fixes: 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20220328062708.207079-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23net: bcmgenet: skip invalid partial checksumsDoug Berger1-2/+4
[ Upstream commit 0f643c88c8d240eba0ea25c2e095a46515ff46e9 ] The RXCHK block will return a partial checksum of 0 if it encounters a problem while receiving a packet. Since a 1's complement sum can only produce this result if no bits are set in the received data stream it is fair to treat it as an invalid partial checksum and not pass it up the stack. Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-23bnx2x: fix built-in kernel driver load failureManish Chopra3-26/+19
[ Upstream commit 424e7834e293936a54fcf05173f2884171adc5a3 ] Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added request_firmware() logic in probe() which caused load failure when firmware file is not present in initrd (below), as access to firmware file is not feasible during probe. Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2 Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2 This patch fixes this issue by - 1. Removing request_firmware() logic from the probe() such that .ndo_open() handle it as it used to handle it earlier 2. Given request_firmware() is removed from probe(), so driver has to relax FW version comparisons a bit against the already loaded FW version (by some other PFs of same adapter) to allow different compatible/close enough FWs with which multiple PFs may run with (in different environments), as the given PF who is in probe flow has no idea now with which firmware file version it is going to initialize the device in ndo_open() Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/ Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19bnx2: Fix an error messageChristophe JAILLET1-1/+1
[ Upstream commit 8ccffe9ac3239e549beaa0a9d5e1a1eac94e866c ] Fix an error message and report the correct failing function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-16net: bcmgenet: Don't claim WOL when its not availableJeremy Linton1-0/+7
[ Upstream commit 00b022f8f876a3a036b0df7f971001bef6398605 ] Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220310045535.224450-1-jeremy.linton@arm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08bnxt_en: Fix occasional ethtool -t loopback test failuresMichael Chan3-1/+9
[ Upstream commit cfcab3b3b61584a02bb523ffa99564eafa761dfe ] In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89b97a ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-02bnxt_en: Increase firmware message response DMA wait timeMichael Chan2-4/+10
[ Upstream commit b891106da52b2c12dbaf73400f6d225b06a38d80 ] When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-02bnxt_en: Fix incorrect multicast rx mask setting when not requestedPavan Chebbi1-5/+8
commit 8cdb15924252e27af16c4a8fe0fc606ce5fd04dc upstream. We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd7a32 ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02bnxt_en: Fix offline ethtool selftest with RDMA enabledMichael Chan2-8/+14
commit 6758f937669dba14c6aac7ca004edda42ec1b18d upstream. For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Ben Li <ben.li@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02bnxt_en: Fix active FEC reporting to ethtoolSomnath Kotur1-0/+3
commit 84d3c83e6ea7d46cf3de3a54578af73eb24a64f2 upstream. ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02bnx2x: fix driver load from initrdManish Chopra1-0/+3
commit e13ad1443684f7afaff24cf207e85e97885256bd upstream. Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627 Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-23Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"Jonas Gorski1-7/+16
commit 6aba04ee3263669b335458c4cf4c7d97d6940229 upstream. This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29bnx2x: Invalidate fastpath HSI version for VFsManish Chopra1-2/+11
commit 802d4d207e75d7208ff75adb712b556c1e91cf1c upstream Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-29bnx2x: Utilize firmware 7.13.21.0Manish Chopra5-28/+69
commit b7a49f73059fe6147b6b78e8f674ce0d21237432 upstream This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27bcmgenet: add WOL IRQ checkSergey Shtylyov1-4/+6
commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27bnxt_en: use firmware provided max timeout for messagesEdwin Peer6-12/+15
[ Upstream commit bce9a0b7900836df223ab638090df0cb8430d9e8 ] Some older devices cannot accommodate the 40 seconds timeout cap for long running commands (such as NVRAM commands) due to hardware limitations. Allow these devices to request more time for these long running commands, but print a warning, since the longer timeout may cause the hung task watchdog to trigger. In the case of a firmware update operation, this is preferable to failing outright. v2: Use bp->hwrm_cmd_max_timeout directly without the constants. Fixes: 881d8353b05e ("bnxt_en: Add an upper bound for all firmware command timeouts.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bnxt_en: move coredump functions into dedicated fileEdwin Peer5-400/+424
[ Upstream commit b032228e58ea2477955058ad4d70a636ce1dec51 ] Change bnxt_get_coredump() and bnxt_get_coredump_length() to non-static functions. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bnxt_en: Refactor coredump functionsEdwin Peer1-17/+31
[ Upstream commit 9a575c8c25ae2372112db6d6b3e553cd90e9f02b ] The coredump functionality will be used by devlink health. Refactor these functions that get coredump and coredump length. There is no functional change, but the following checkpatch warnings were addressed: - strscpy is preferred over strlcpy. - sscanf results should be checked, with an additional warning. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli2-1/+5
[ Upstream commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 ] The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang1-1/+3
commit 128f6ec95a282b2d8bc1041e59bf65810703fa44 upstream. The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25bnxt_en: reject indirect blk offload when hw-tc-offload is offSriharsha Basavapatna1-1/+1
[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ] The driver does not check if hw-tc-offload is enabled for the device before offloading a flow in the context of indirect block callback. Fix this by checking NETIF_F_HW_TC in the features flag and rejecting the offload request. This will avoid unnecessary dmesg error logs when hw-tc-offload is disabled, such as these: bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22 Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-25net: bnx2x: fix variable dereferenced before checkPavel Skripkin1-1/+3
[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ] Smatch says: bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op() warn: variable dereferenced before check 'ilt' (see line 638) Move ilt_cli variable initialization _after_ ilt validation, because it's unsafe to deref the pointer before validation check. Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18bnxt_en: Check devlink allocation and registration statusLeon Romanovsky3-21/+10
[ Upstream commit e624c70e1131e145bd0510b8a700b5e2d112e377 ] devlink is a software interface that doesn't depend on any hardware capabilities. The failure in SW means memory issues, wrong parameters, programmer error e.t.c. Like any other such interface in the kernel, the returned status of devlink APIs should be checked and propagated further and not ignored. Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-27net: bgmac-platform: handle mac-address deferralMatthew Hagan1-0/+3
This patch is a replication of Christian Lamparter's "net: bgmac-bcma: handle deferred probe error due to mac-address" patch for the bgmac-platform driver [1]. As is the case with the bgmac-bcma driver, this change is to cover the scenario where the MAC address cannot yet be discovered due to reliance on an nvmem provider which is yet to be instantiated, resulting in a random address being assigned that has to be manually overridden. [1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20bnxt_en: Fix TX timeout when TX ring size is set to the smallestMichael Chan3-5/+10
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: bgmac-bcma: handle deferred probe error due to mac-addressChristian Lamparter1-0/+2
Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar <ynezz@true.cz> Cc: Michael Walle <michael@walle.cc> Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds3-8/+30
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-16net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assertEli Cohen1-3/+0
Remove the assert from the callback priv lookup function since it does not require RTNL lock and is already protected by flow_indr_block_lock. This will avoid warnings from being emitted to dmesg if the driver registers its callback after an ingress qdisc was created for a netdevice. The warnings started after the following patch was merged: commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15bnx2x: Fix enabling network interfaces without VFsAdrian Bunk1-1/+1
This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk <bunk@kernel.org> Reported-by: YunQiang Su <wzssyqa@gmail.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Cc: stable@vger.kernel.org Acked-by: Shai Malin <smalin@marvell.com> Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-13bnxt_en: Clean up completion ring page arrays completelyMichael Chan1-0/+8
We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c7448790b8 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: make bnxt_free_skbs() safe to call after bnxt_free_mem()Edwin Peer1-0/+13
The call to bnxt_free_mem(..., false) in the bnxt_half_open_nic() error path will deallocate ring descriptor memory via bnxt_free_?x_rings(), but because irq_re_init is false, the ring info itself is not freed. To simplify error paths, deallocation functions have generally been written to be safe when called on unallocated memory. It should always be safe to call dev_close(), which calls bnxt_free_skbs() a second time, even in this semi- allocated ring state. Calling bnxt_free_skbs() a second time with the rings already freed will cause NULL pointer dereference. Fix it by checking the rings are valid before proceeding in bnxt_free_tx_skbs() and bnxt_free_one_rx_ring_skbs(). Fixes: 975bc99a4a39 ("bnxt_en: Refactor bnxt_free_rx_skbs().") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: Fix error recovery regressionMichael Chan1-4/+8
The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b91831983 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds6-227/+69
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-05bnxt_en: Fix possible unintended driver initiated error recoveryMichael Chan1-7/+18
If error recovery is already enabled, bnxt_timer() will periodically check the heartbeat register and the reset counter. If we get an error recovery async. notification from the firmware (e.g. change in primary/secondary role), we will immediately read and update the heartbeat register and the reset counter. If the timer for the next health check expires soon after this, we may read the heartbeat register again in quick succession and find that it hasn't changed. This will trigger error recovery unintentionally. The likelihood is small because we also reset fw_health->tmr_counter which will reset the interval for the next health check. But the update is not protected and bnxt_timer() can miss the update and perform the health check without waiting for the full interval. Fix it by only reading the heartbeat register and reset counter in bnxt_async_event_process() if error recovery is trasitioning to the enabled state. Also add proper memory barriers so that when enabling for the first time, bnxt_timer() will see the tmr_counter interval and perform the health check after the full interval has elapsed. Fixes: 7e914027f757 ("bnxt_en: Enable health monitoring.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: Fix UDP tunnel logicMichael Chan1-11/+17
The current logic assumes that when the driver sends the message to the firmware to add the VXLAN or Geneve port, the firmware will never fail the operation. The UDP ports are always stored and are used to check the tunnel packets in .ndo_features_check(). These tunnnel packets will fail to offload on the transmit side if firmware fails the call to add the UDP ports. To fix the problem, bp->vxlan_port and bp->nge_port will only be set to the offloaded ports when the HWRM_TUNNEL_DST_PORT_ALLOC firmware call succeeds. When deleting a UDP port, we check that the port was previously added successfuly first by checking the FW ID. Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: Fix asic.rev in devlink dev info commandMichael Chan1-1/+1
The current asic.rev is incomplete and does not include the metal revision. Add the metal revision and decode the complete asic revision into the more common and readable form (A0, B0, etc). Fixes: 7154917a12b2 ("bnxt_en: Refactor bnxt_dl_info_get().") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: fix read of stored FW_PSID version on P5 devicesEdwin Peer2-15/+34
P5 devices store NVM arrays using a different internal representation. This implementation detail permeates into the HWRM API, requiring the caller to explicitly index the array elements in HWRM_NVM_GET_VARIABLE on these devices. Conversely, older devices do not support the indexed mode of operation and require reading the raw NVM content. Fixes: db28b6c77f40 ("bnxt_en: Fix devlink info's stored fw.psid version format.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: fix stored FW_PSID version masksEdwin Peer1-2/+2
The FW_PSID version components are 8 bits wide, not 4. Fixes: db28b6c77f40 ("bnxt_en: Fix devlink info's stored fw.psid version format.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-02bnxt_en: fix kernel doc warnings in bnxt_hwrm.cEdwin Peer1-7/+7
Parameter names in the comments did not match the function arguments. Fixes: 213808170840 ("bnxt_en: add support for HWRM request slices") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reported-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210901185315.57137-1-edwin.peer@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-01bnxt_en: Fix 64-bit doorbell operation on 32-bit kernelsMichael Chan2-18/+33
The driver requires 64-bit doorbell writes to be atomic on 32-bit architectures. So we redefined writeq as a new macro with spinlock protection on 32-bit architectures. This created a new warning when we added a new file in a recent patchset. writeq is defined on many 32-bit architectures to do the memory write non-atomically and it generated a new macro redefined warning. This warning was fixed incorrectly in the recent patch. Fix this properly by adding a new bnxt_writeq() function that will do the non-atomic write under spinlock on 32-bit systems. All callers in the driver will now call bnxt_writeq() instead. v2: Need to pass in bp to bnxt_writeq() Use lo_hi_writeq() [suggested by Florian] Reported-by: kernel test robot <lkp@intel.com> Fixes: f9ff578251dc ("bnxt_en: introduce new firmware message API based on DMA pools") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: support multiple HWRM commands in flightEdwin Peer4-39/+113
Add infrastructure to maintain a pending list of HWRM commands awaiting completion and reduce the scope of the hwrm_cmd_lock mutex so that it protects only the request mailbox. The mailbox is free to use for one or more concurrent commands after receiving deferred response events. For uniformity and completeness, use the same pending list for collecting completions for commands that respond via a completion ring. These commands are only used for freeing rings and for IRQ test and we only support one such command in flight. Note deferred responses are also only supported on the main channel. The secondary channel (KONG) does not support deferred responses. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: remove legacy HWRM interfaceEdwin Peer4-106/+1
There are no longer any callers relying on the old API. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer9-1538/+1953
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: use link_lock instead of hwrm_cmd_lock to protect link_infoEdwin Peer2-2/+7
We currently use the hwrm_cmd_lock to serialize the update of the firmware's link status response data and the copying of link status data to the VF. This won't work when we update the firmware message APIs, so we use the link_lock mutex instead. All link_info data should be updated under the link_lock mutex. Also add link_lock to functions that touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking is probably not strictly necessary during probe, but it's more consistent. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-29 16:44:47 +0300