summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ezchip
AgeCommit message (Collapse)AuthorFilesLines
2019-08-21ezchip: nps_enet: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-12net: nps_enet: Fix function names in doc commentsJonathan Neuschäfer1-2/+2
Adjust the function names in two doc comments to match the corresponding functions. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 291Thomas Gleixner2-24/+2
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope [that] it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 57 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.515993066@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal1-0/+1
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30ezchip: nps_enet: check if napi has been completedZakharov Vlad1-3/+1
After a new NAPI_STATE_MISSED state was added to NAPI we can get into this state and in such case we have to reschedule NAPI as some work is still pending and we have to process it. napi_complete_done() function returns false if we have to reschedule something (e.g. in case we were in MISSED state) as current polling have not been completed yet. nps_enet driver hasn't been verifying the return value of napi_complete_done() and has been forcibly enabling interrupts. That is not correct as we should not enable interrupts before we have processed all scheduled work. As a result we were getting trapped in interrupt hanlder chain as we had never been able to disabale ethernet interrupts again. So this patch makes nps_enet_poll() func verify return value of napi_complete_done() and enable interrupts only in case all scheduled work has been completed. Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: nps_enet: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias $ After this patch: $ modinfo drivers/net/ethernet/ezchip/nps_enet.ko | grep alias alias: of:N*T*Cezchip,nps-mgt-enetC* alias: of:N*T*Cezchip,nps-mgt-enet Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: nps_enet: code reuseElad Kanfi1-10/+11
Add inline function that checks if there is a pending tx packet. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: nps_enet: fix coding style issuesElad Kanfi1-3/+3
Fix following coding style problems : ERROR: else should follow close brace '}' + } + else { /* !dst_is_aligned */ WARNING: Missing a blank line after declarations + u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); + put_unaligned_be32(buf, reg); WARNING: Missing a blank line after declarations + u32 buf; + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); CHECK: Blank lines aren't necessary before a close brace '}' + + } total: 1 errors, 2 warnings, 1 checks, 683 lines checked Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12net: nps_enet: Fix PCS resetNoam Camus1-0/+1
During commit b54b8c2d6e3c ("net: ezchip: adapt driver to little endian architecture") adapting to little endian architecture, zeroing of controller was left out. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-30net: nps_enet: Disable interrupts before napi rescheduleElad Kanfi1-1/+3
Since NAPI works by shutting down event interrupts when theres work and turning them on when theres none, the net driver must make sure that interrupts are disabled when it reschedules polling. By calling napi_reschedule, the driver switches to polling mode, therefor there should be no interrupt interference. Any received packets will be handled in nps_enet_poll by polling the HW indication of received packet until all packets are handled. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net: nps_enet: bug fix - handle lost tx interruptsElad Kanfi1-0/+15
The tx interrupt is of edge type, and in case such interrupt is triggered while it is masked it will not be handled even after tx interrupts are re-enabled in the end of NAPI poll. This will cause tx network to stop in the following scenario: * Rx is being handled, hence interrupts are masked. * Tx interrupt is triggered after checking if there is some tx to handle and before re-enabling the interrupts. In this situation only rx transaction will release tx requests. In order to handle the tx that was missed( if there was one ), a NAPI reschdule was added after enabling the interrupts. Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net: nps_enet: Tx handler synchronizationElad Kanfi2-8/+9
Below is a description of a possible problematic sequence. CPU-A is sending a frame and CPU-B handles the interrupt that indicates the frame was sent. CPU-B reads an invalid value of tx_packet_sent. CPU-A CPU-B ----- ----- nps_enet_send_frame . . tx_skb = skb tx_packet_sent = true order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_packet_sent == true) handle tx_skb end memory transaction (tx_packet_sent actually written) Furthermore there is a dependency between tx_skb and tx_packet_sent. There is no assurance that tx_skb contains a valid pointer at CPU B when it sees tx_packet_sent == true. Solution: Initialize tx_skb to NULL and use it to indicate that packet was sent, in this way tx_packet_sent can be removed. Add a write memory barrier after setting tx_skb in order to make sure that it is valid before HW is informed and IRQ is fired. Fixed sequence will be: CPU-A CPU-B ----- ----- tx_skb = skb wmb() . . order HW to start tx . . HW complete tx ------> get tx complete interrupt . . if(tx_skb != NULL) handle tx_skb tx_skb = NULL Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Acked-by: Gilad Ben-Yossef <giladby@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-04net: ezchip: adapt driver to little endian architectureLada Trimasova2-332/+238
Since ezchip network driver is written with big endian EZChip platform it is necessary to add support for little endian architecture. The first issue is that the order of the bits in a bit field is implementation specific. So all the bit fields are removed. Named constants are used to access necessary fields. And the second one is that network byte order is big endian. For example, data on ethernet is transmitted with most-significant octet (byte) first. So in case of little endian architecture it is important to swap data byte order when we read it from register. In case of unaligned access we can use "get_unaligned_be32" and in other case we can use function "ioread32_rep" which reads all data from register and works either with little endian or big endian architecture. And then when we are going to write data to register we need to restore byte order using the function "put_unaligned_be32" in case of unaligned access and in other case "iowrite32_rep". The last little fix is a space between type and pointer to observe coding style. Signed-off-by: Lada Trimasova <ltrimas@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Tal Zilcer <talz@ezchip.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29net: Fix dependencies for !HAS_IOMEM archsRichard Weinberger1-0/+1
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-09net: ezchip: fix address space confusion in nps_enet.cArnd Bergmann1-21/+9
The nps_enet driver happily mixes virtual, physical and __iomem addresses, which are all different depending on the architecture and configuration. That causes a warning when building the code on ARM with LPAE mode enabled: drivers/net/ethernet/ezchip/nps_enet.c: In function 'nps_enet_send_frame': drivers/net/ethernet/ezchip/nps_enet.c:370:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] but will also fail to work for other reasons. In this patch, I'm trying to change the code to use only normal kernel pointers, which I assume is what the author actually meant: * For reading or writing a 32-bit word that may be unaligned when an SKB contains unaligned data, I'm using get_unaligned/put_unaligned() rather than memcpy_fromio/toio. * For converting a u8 pointer to a u32 pointer, I use a cast rather than the incorrect virt_to_phys. * For copying a couple of bytes from one place to another while respecting alignment, I use memcpy instead of memcpy_toio. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24NET: nps_enet: minor namespace cleanupNoam Camus1-3/+4
We define buf_int_enable in the minimal namespace it is used. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24NET: nps_enet: TX done acknowledge.Noam Camus1-0/+3
This is needed for when TX done interrupt is in "level mode". For example it is true for some simulators of this device. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24NET: nps_enet: drop control framesNoam Camus1-4/+4
We set controller to drop control frames and not trying to pass them on. This is only needed for debug reasons. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24NET: nps_enet: TX done race conditionNoam Camus1-7/+3
We need to set tx_skb pointer before send frame. If we receive interrupt before we set pointer we will try to free SKB with wrong pointer. Now we are sure that SKB pointer will never be NULL during handling TX done and check is removed. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-24NET: nps_enet: replace use of cause registerNoam Camus2-24/+5
When interrupt is received we read directly from control register for RX/TX instead of reading cause register since this register fails to indicate TX done when TX interrupt is "edge mode". Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23NET: Add ezchip ethernet driverNoam Camus4-0/+1021
Simple LAN device for debug or management purposes. Device supports interrupts for RX and TX(completion). Device does not have DMA ability. Signed-off-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Tal Zilcer <talz@ezchip.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>