summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc
AgeCommit message (Collapse)AuthorFilesLines
2021-03-23igc: Fix prototype warningSasha Neftin1-1/+1
Correct report warnings in igc_i225.c Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Assign boolean values to a bool variableJiapeng Zhong1-8/+8
Fix the following coccicheck warnings: ./drivers/net/ethernet/intel/igc/igc_main.c:4961:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4955:2-14: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4933:1-13: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4592:1-24: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4438:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4396:2-25: WARNING: Assignment of 0/1 to bool variable. ./drivers/net/ethernet/intel/igc/igc_main.c:4018:2-25: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_LOOPBACKSasha Neftin1-1/+0
MII_CR_LOOPBACK masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_SPEEDSasha Neftin1-3/+0
Force PHY speed not supported for i225 devices. MII_CR_SPEED masks not in use in i225 device and can be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igc: Remove unused MII_CR_RESETSasha Neftin1-1/+0
MII_CR_RESET mask not in use in i225 device and can be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-10net: add a helper to avoid issues with HW TX timestamping and SO_TXTIMEVladimir Oltean1-1/+1
As explained in commit 29d98f54a4fe ("net: enetc: allow hardware timestamping on TX queues with tc-etf enabled"), hardware TX timestamping requires an skb with skb->tstamp = 0. When a packet is sent with SO_TXTIME, the skb->skb_mstamp_ns corrupts the value of skb->tstamp, so the drivers need to explicitly reset skb->tstamp to zero after consuming the TX time. Create a helper named skb_txtime_consumed() which does just that. All drivers which offload TC_SETUP_QDISC_ETF should implement it, and it would make it easier to assess during review whether they do the right thing in order to be compatible with hardware timestamping or not. Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-05Merge branch '1GbE' of ↵Jakub Kicinski9-9/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-02-03 This series contains updates to igc, igb, e1000e, and e1000 drivers. Sasha adds counting of good transmit packets and reporting of NVM version and gPHY version in ethtool firmware version. Replaces the use of strlcpy to the preferred strscpy. Fixes a typo that caused the wrong register to be output. He also removes an unused function pointer, some unneeded defines, and a non-applicable comment. All changes for igc. Gal Hammer fixes a typo which caused the RDBAL register values to be shown instead of TDBAL for igb. Nick Lowe enables RSS support for i211 devices for igb. Tom Rix fixes checkpatch warning by removing h from printk format specifier for igb. Kaixu Xia removes setting of a variable that is overwritten before next use for e1000e. Sudip Mukherjee removes an unneeded assignment for e1000. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: drop unneeded assignment in e1000_set_itr() e1000e: remove the redundant value assignment in e1000_update_nvm_checksum_spt igb: remove h from printk format specifier igb: Enable RSS for Intel I211 Ethernet Controller igb: fix TDBAL register show incorrect value igc: Fix TDBAL register show incorrect value igc: Remove unused FUNC_1 mask igc: Remove unused local receiver mask igc: Prefer strscpy over strlcpy igc: Expose the gPHY firmware version igc: Expose the NVM version igc: Add Host Good Packets Transmitted Count igc: Remove MULR mask define igc: Remove igc_set_fw_version comment igc: Clean up nvm_operations structure ==================== Link: https://lore.kernel.org/r/20210204004259.3662059-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-05net: use the new dev_page_is_reusable() instead of private versionsAlexander Lobakin1-7/+2
Now we can remove a bunch of identical functions from the drivers and make them use common dev_page_is_reusable(). All {,un}likely() checks are omitted since it's already present in this helper. Also update some comments near the call sites. Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Cc: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-04igc: Fix TDBAL register show incorrect valueSasha Neftin1-1/+1
Fixed a typo which caused the registers dump function to read the RDBAL register when printing TDBAL register values. _reg_dump method has been partially derived from i210 and have same typo. Suggested-by: Gal Hammer <ghammer@redhat.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Remove unused FUNC_1 maskSasha Neftin1-1/+0
FUNC_1 mask not in use in i225 device and could be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Remove unused local receiver maskSasha Neftin1-1/+0
Local receiver mask SR_1000T_LOCAL_RX_STATUS not in use in i225 device and could be removed Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Prefer strscpy over strlcpySasha Neftin1-1/+1
Use the strscpy method instead of strlcpy method. See: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr _i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Expose the gPHY firmware versionSasha Neftin5-3/+28
Extend reporting of NVM image version to include the gPHY (i225 PHY) firmware version. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Expose the NVM versionSasha Neftin3-2/+17
Expose the NVM map version via drvinfo in ethtool NVM image version is reported as firmware version for i225 device Minor typo fix - remove space Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Add Host Good Packets Transmitted CountSasha Neftin1-0/+1
This counter counts the number of good (non-erred) packets transmitted sent by the host. A good transmit packet is considered one that is 64 or more bytes in length (from <Destination Address> through <CRC>, inclusively) in length Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Remove MULR mask defineSasha Neftin1-1/+0
Multiple Tx Data Read Requests is hardware pipeline feature and is not controlled by software Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Remove igc_set_fw_version commentSasha Neftin1-1/+0
i225 device not supported and do not plan to support configuration of fw version string for ethtool Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-04igc: Clean up nvm_operations structureSasha Neftin1-1/+0
valid_led_default function pointer not in use and can be removed from nvm_operations structure. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-4/+4
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01igc: check return value of ret_val in igc_config_fc_after_link_upKevin Lo1-1/+1
Check return value from ret_val to make error check actually work. Fixes: 4eb8080143a9 ("igc: Add setup link functionality") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: set the default return value to -IGC_ERR_NVM in igc_write_nvm_srwrKevin Lo1-2/+1
This patch sets the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM write EEWR timeout. Fixes: ab4056126813 ("igc: Add NVM support") Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-01igc: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng1-1/+2
Similar to commit 165ae7a8feb5 ("igb: Report speed and duplex as unknown when device is runtime suspended"), if we try to read speed and duplex sysfs while the device is runtime suspended, igc will complain and stops working: [ 123.449883] igc 0000:03:00.0 enp3s0: PCIe link lost, device now detached [ 123.450052] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 123.450056] #PF: supervisor read access in kernel mode [ 123.450058] #PF: error_code(0x0000) - not-present page [ 123.450059] PGD 0 P4D 0 [ 123.450064] Oops: 0000 [#1] SMP NOPTI [ 123.450068] CPU: 0 PID: 2525 Comm: udevadm Tainted: G U W OE 5.10.0-1002-oem #2+rkl2-Ubuntu [ 123.450078] RIP: 0010:igc_rd32+0x1c/0x90 [igc] [ 123.450080] Code: c0 5d c3 b8 fd ff ff ff c3 0f 1f 44 00 00 0f 1f 44 00 00 55 89 f0 48 89 e5 41 56 41 55 41 54 49 89 c4 53 48 8b 57 08 48 01 d0 <44> 8b 28 41 83 fd ff 74 0c 5b 44 89 e8 41 5c 41 5d 4 [ 123.450083] RSP: 0018:ffffb0d100d6fcc0 EFLAGS: 00010202 [ 123.450085] RAX: 0000000000000008 RBX: ffffb0d100d6fd30 RCX: 0000000000000000 [ 123.450087] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff945a12716c10 [ 123.450089] RBP: ffffb0d100d6fce0 R08: ffff945a12716550 R09: ffff945a09874000 [ 123.450090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000008 [ 123.450092] R13: ffff945a12716000 R14: ffff945a037da280 R15: ffff945a037da290 [ 123.450094] FS: 00007f3b34c868c0(0000) GS:ffff945b89200000(0000) knlGS:0000000000000000 [ 123.450096] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 123.450098] CR2: 0000000000000008 CR3: 00000001144de006 CR4: 0000000000770ef0 [ 123.450100] PKRU: 55555554 [ 123.450101] Call Trace: [ 123.450111] igc_ethtool_get_link_ksettings+0xd6/0x1b0 [igc] [ 123.450118] __ethtool_get_link_ksettings+0x71/0xb0 [ 123.450123] duplex_show+0x74/0xc0 [ 123.450129] dev_attr_show+0x1d/0x40 [ 123.450134] sysfs_kf_seq_show+0xa1/0x100 [ 123.450137] kernfs_seq_show+0x27/0x30 [ 123.450142] seq_read+0xb7/0x400 [ 123.450148] ? common_file_perm+0x72/0x170 [ 123.450151] kernfs_fop_read+0x35/0x1b0 [ 123.450155] vfs_read+0xb5/0x1b0 [ 123.450157] ksys_read+0x67/0xe0 [ 123.450160] __x64_sys_read+0x1a/0x20 [ 123.450164] do_syscall_64+0x38/0x90 [ 123.450168] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 123.450170] RIP: 0033:0x7f3b351fe142 [ 123.450173] Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 123.450174] RSP: 002b:00007fffef2ec138 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 123.450177] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b351fe142 [ 123.450179] RDX: 0000000000001001 RSI: 00005644c047f070 RDI: 0000000000000003 [ 123.450180] RBP: 00007fffef2ec340 R08: 00005644c047f070 R09: 00007f3b352d9320 [ 123.450182] R10: 00005644c047c010 R11: 0000000000000246 R12: 00005644c047cbf0 [ 123.450184] R13: 00005644c047e6d0 R14: 0000000000000003 R15: 00007fffef2ec140 [ 123.450189] Modules linked in: rfcomm ccm cmac algif_hash algif_skcipher af_alg bnep toshiba_acpi industrialio toshiba_haps hp_accel lis3lv02d btusb btrtl btbcm btintel bluetooth ecdh_generic ecc joydev input_leds nls_iso8859_1 snd_sof_pci snd_sof_intel_byt snd_sof_intel_ipc snd_sof_intel_hda_common snd_soc_hdac_hda snd_hda_codec_hdmi snd_sof_xtensa_dsp snd_sof_intel_hda snd_sof snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg soundwire_intel soundwire_generic_allocation soundwire_cadence snd_hda_codec snd_hda_core ath10k_pci snd_hwdep intel_rapl_msr intel_rapl_common ath10k_core soundwire_bus snd_soc_core x86_pkg_temp_thermal ath intel_powerclamp snd_compress ac97_bus snd_pcm_dmaengine mac80211 snd_pcm coretemp snd_seq_midi snd_seq_midi_event snd_rawmidi kvm_intel cfg80211 snd_seq snd_seq_device snd_timer mei_hdcp kvm libarc4 snd crct10dif_pclmul ghash_clmulni_intel aesni_intel mei_me dell_wmi [ 123.450266] dell_smbios soundcore sparse_keymap dcdbas crypto_simd cryptd mei dell_uart_backlight glue_helper ee1004 wmi_bmof intel_wmi_thunderbolt dell_wmi_descriptor mac_hid efi_pstore acpi_pad acpi_tad intel_cstate sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 btrfs blake2b_generic raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mirror dm_region_hash dm_log hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec crc32_pclmul rc_core drm intel_lpss_pci i2c_i801 ahci igc intel_lpss i2c_smbus idma64 xhci_pci libahci virt_dma xhci_pci_renesas wmi video pinctrl_tigerlake [ 123.450335] CR2: 0000000000000008 [ 123.450338] ---[ end trace 9f731e38b53c35cc ]--- The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks, and calls runtime resume and runtime suspend routine respectively. However, igc is like igb, runtime resume routine uses rtnl_lock() which upper ethtool layer also uses. So to prevent a deadlock on rtnl, take a different approach, use pm_runtime_suspended() to avoid reading register while device is runtime suspended. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+18
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27igc: fix link speed advertisingCorinna Vinschen1-6/+18
Link speed advertising in igc has two problems: - When setting the advertisement via ethtool, the link speed is converted to the legacy 32 bit representation for the intel PHY code. This inadvertently drops ETHTOOL_LINK_MODE_2500baseT_Full_BIT (being beyond bit 31). As a result, any call to `ethtool -s ...' drops the 2500Mbit/s link speed from the PHY settings. Only reloading the driver alleviates that problem. Fix this by converting the ETHTOOL_LINK_MODE_2500baseT_Full_BIT to the Intel PHY ADVERTISE_2500_FULL bit explicitly. - Rather than checking the actual PHY setting, the .get_link_ksettings function always fills link_modes.advertising with all link speeds the device is capable of. Fix this by checking the PHY autoneg_advertised settings and report only the actually advertised speeds up to ethtool. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-01-20net: igc: use skb_csum_is_sctp instead of protocol checkXin Long1-13/+1
Using skb_csum_is_sctp is a easier way to validate it's a SCTP CRC checksum offload packet, and yet it also makes igc support SCTP CRC checksum offload for UDP and GRE encapped packets, just as it does in igb driver. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-11igc: Add new device IDSasha Neftin3-0/+3
Add new device ID for the next step of the silicon and reflect the I226_K part. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-11igc: Fix returning wrong statisticsVinicius Costa Gomes1-6/+8
'igc_update_stats()' was not updating 'netdev->stats', so the returned statistics, for example, requested by: $ ip -s link show dev enp3s0 were not being updated and were always zero. Fix by returning a set of statistics that are actually being updated (adapter->stats64). Fixes: c9a11c23ceb6 ("igc: Add netdev") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-30net: intel: Remove in_interrupt() warningsSebastian Andrzej Siewior1-1/+0
in_interrupt() is ill defined and does not provide what the name suggests. The usage especially in driver code is deprecated and a tree wide effort to clean up and consolidate the (ab)usage of in_interrupt() and related checks is happening. In this case the checks cover only parts of the contexts in which these functions cannot be called. They fail to detect preemption or interrupt disabled invocations. As the functions which are invoked from the various places contain already a broad variety of checks (always enabled or debug option dependent) cover all invalid conditions already, there is no point in having inconsistent warnings in those drivers. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29igc: Clean up nvm_info structureSasha Neftin1-3/+0
flash_bank_size and flash_base_addr field not in use and can be removed from a nvm_info structure Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Reject schedules with a base_time in the futureVinicius Costa Gomes1-2/+23
When we set the BASET registers of i225 with a base_time in the future, i225 will "hold" all packets until that base_time is reached, causing a lot of TX Hangs. As this behaviour seems contrary to the expectations of the IEEE 802.1Q standard (section 8.6.9, especially 8.6.9.4.5), let's start by rejecting these types of schedules. If this is too limiting, we can for example, setup a timer to configure the BASET registers closer to the start time, only blocking the packets for a "short" while. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Export a way to read the PTP timerVinicius Costa Gomes2-4/+4
The next patch will need a way to retrieve the current timestamp from the NIC's PTP clock. The 'i225' suffix is removed, if anything model specific is needed, those specifics should be hidden by this function. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Remove reset disable flagSasha Neftin1-1/+0
Boolean reset disable flag not applicable for i225 device and could be removed. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Save PTP time before a resetVinicius Costa Gomes3-3/+29
Many TSN features depend on the internal PTP clock, so the internal PTP jumping when the adapter is reset can cause problems, usually in the form of "TX Hangs" warnings in the driver. The solution is to save the PTP time before a reset and restore it after the reset is done. The value of the PTP time is saved before a reset and we use the difference from CLOCK_MONOTONIC from reset time to now, to correct what's going to be the new PTP time. This is heavily inspired by commit bf4bf09bdd91 ("i40e: save PTP time before a device reset"). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Remove references to SYSTIMR registerVinicius Costa Gomes1-10/+2
In i225, it's no longer necessary to use the SYSTIMR register to latch the timer value, the timestamp is latched when SYSTIML is read. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Expose LPI countersSasha Neftin3-0/+7
Completion to commit 900d1e8b346b ("igc: Add LPI counters") LPI counters exposed by statistics update method. A EEE TX LPI counter reflect the transmitter entries EEE (IEEE 802.3az) into the LPI state. A EEE RX LPI counter reflect the receiver link partner entries into EEE(IEEE 802.3az) LPI state. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Clean RX descriptor error flagsAndre Guedes2-16/+3
i225 advanced receive descriptor doesn't have the following extend error bits: CE, SE, SEQ, CXE. In addition to that, the bit TCPE is called L4E in the datasheet. Clean up the code accordingly, and get rid of the macro IGC_RXDEXT_ERR_FRAME_ERR_MASK since it doesn't make much sense anymore. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Remove timeout check from ptp_tx workAndre Guedes1-6/+0
The Tx timestamp timeout is already checked by the watchdog_task which runs periodically. In addition to that, from the ptp_tx work perspective, if __IGC_PTP_TX_IN_PROGRESS flag is set we always want handle the timestamp stored in hardware and update the skb. So remove the timeout check in igc_ptp_tx_work() function. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Don't reschedule ptp_tx workAndre Guedes1-5/+4
The ptp_tx work is scheduled only if TSICR.TXTS bit is set, therefore TSYNCTXCTL.TXTT_0 bit is expected to be set when we check it igc_ptp_tx_ work(). If it isn't, something is really off and rescheduling the ptp_tx work to check it later doesn't help much. This patch changes the code to WARN_ON_ONCE() if this situation ever happens. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Rename IGC_TSYNCTXCTL_VALID macroAndre Guedes2-2/+2
Rename the IGC_TSYNCTXCTL_VALID macro to IGC_TSYNCTXCTL_TXTT_0 so it matches the datasheet. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-29igc: Add new device ID'sSasha Neftin3-0/+15
Add new device ID's for the next step of the silicon and reflect i221 and i226 parts Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-26intel-ethernet: clean up W=1 warnings in kdocJesse Brandeburg2-3/+3
This takes care of all of the trivial W=1 fixes in the Intel Ethernet drivers, which allows developers and maintainers to build more of the networking tree with more complete warning checks. There are three classes of kdoc warnings fixed: - cannot understand function prototype: 'x' - Excess function parameter 'x' description in 'y' - Function parameter or member 'x' not described in 'y' All of the changes were trivial comment updates on function headers. Inspired by Lee Jones' series of wireless work to do the same. Compile tested only, and passes simple test of $ git ls-files *.[ch] | egrep drivers/net/ethernet/intel | \ xargs scripts/kernel-doc -none Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-12/+27
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10igc: Fix not considering the TX delay for timestampsVinicius Costa Gomes1-0/+19
When timestamping a packet there's a delay between the start of the packet and the point where the hardware actually captures the timestamp. This difference needs to be considered if we want accurate timestamps. This was done on the RX side, but not on the TX side. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-09-10igc: Fix wrong timestamp latency numbersVinicius Costa Gomes1-12/+8
The previous timestamping latency numbers were obtained by interpolating the i210 numbers with the i225 crystal clock value. That calculation was wrong. Use the correct values from real measurements. Fixes: 81b055205e8b ("igc: Add support for RX timestamping") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-27net: Take common prefetch code structure into a functionTariq Toukan1-8/+2
Many device drivers use the same prefetch code structure to deal with small L1 cacheline size. Take this code into a function and call it from the drivers. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14igc: Fix PTP initializationVinicius Costa Gomes2-5/+2
Right now, igc_ptp_reset() is called from igc_reset(), which is called from igc_probe() before igc_ptp_init() has a chance to run. It is detected as an attempt to use an spinlock without registering its key first. See log below. To avoid this problem, simplify the initialization: igc_ptp_init() is only called from igc_probe(), and igc_ptp_reset() is only called from igc_reset(). [ 2.736332] INFO: trying to register non-static key. [ 2.736902] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 2.737513] the code is fine but needs lockdep annotation. [ 2.737513] turning off the locking correctness validator. [ 2.737515] CPU: 8 PID: 239 Comm: systemd-udevd Tainted: G E 5.8.0-rc7+ #13 [ 2.737515] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 2.737516] Call Trace: [ 2.737521] dump_stack+0x78/0xa0 [ 2.737524] register_lock_class+0x6b1/0x6f0 [ 2.737526] ? lockdep_hardirqs_on_prepare+0xca/0x160 [ 2.739177] ? _raw_spin_unlock_irq+0x24/0x50 [ 2.739179] ? trace_hardirqs_on+0x1c/0xf0 [ 2.740820] __lock_acquire+0x56/0x1ff0 [ 2.740823] ? __schedule+0x30c/0x970 [ 2.740825] lock_acquire+0x97/0x3e0 [ 2.740830] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.740833] ? schedule_hrtimeout_range_clock+0xb7/0x120 [ 2.742507] _raw_spin_lock_irqsave+0x3a/0x50 [ 2.742512] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.742515] igc_ptp_reset+0x35/0xf0 [igc] [ 2.742519] igc_reset+0x96/0xd0 [igc] [ 2.744148] igc_probe+0x68f/0x7d0 [igc] [ 2.745796] local_pci_probe+0x3d/0x70 [ 2.745799] pci_device_probe+0xd1/0x190 [ 2.745802] really_probe+0x15a/0x3f0 [ 2.759936] driver_probe_device+0xe1/0x150 [ 2.759937] device_driver_attach+0xa8/0xb0 [ 2.761786] __driver_attach+0x89/0x150 [ 2.761786] ? device_driver_attach+0xb0/0xb0 [ 2.761787] ? device_driver_attach+0xb0/0xb0 [ 2.761788] bus_for_each_dev+0x66/0x90 [ 2.765012] bus_add_driver+0x12e/0x1f0 [ 2.765716] driver_register+0x8b/0xe0 [ 2.766418] ? 0xffffffffc0230000 [ 2.767119] do_one_initcall+0x5a/0x310 [ 2.767826] ? kmem_cache_alloc_trace+0xe9/0x200 [ 2.768528] do_init_module+0x5c/0x260 [ 2.769206] __do_sys_finit_module+0x93/0xe0 [ 2.770048] do_syscall_64+0x46/0xa0 [ 2.770716] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2.771396] RIP: 0033:0x7f83534589e0 [ 2.772073] Code: 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 2e 2e 2e 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 80 24 0d 00 f7 d8 64 89 01 48 [ 2.772074] RSP: 002b:00007ffd31d0ed18 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.774854] RAX: ffffffffffffffda RBX: 000055d52816aba0 RCX: 00007f83534589e0 [ 2.774855] RDX: 0000000000000000 RSI: 00007f83535b982f RDI: 0000000000000006 [ 2.774855] RBP: 00007ffd31d0ed60 R08: 0000000000000000 R09: 00007ffd31d0ed30 [ 2.774856] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.774856] R13: 0000000000020000 R14: 00007f83535b982f R15: 000055d527f5e120 Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-27igc: Fix static checker warningSasha Neftin1-1/+1
drivers/net/ethernet/intel/igc/igc_mac.c:424 igc_check_for_copper_link() error: uninitialized symbol 'link'. This patch come to fix this warning and initialize the 'link' symbol. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 707abf069548 ("igc: Add initial LTR support") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-27igc: Clean up the hw_stats structureSasha Neftin4-13/+0
Remove ictxptc, ictxatc, cbtmpc, cbrdpc, cbrmpc and htcbdpc fields from the hw_stats structure. Accordance to the i225 device specification these fields not in use. This patch come to clean up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-27igc: Clean up the mac_info structureSasha Neftin1-5/+0
collision_delta, tx_packet_delta, txcw, adaptive_ifs and has_fwsm fields not in use. This patch come to clean up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-27igc: Remove ledctl_ fields from the mac_info structureSasha Neftin1-3/+0
LED control currently not implemented. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-12 15:56:28 +0300