summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlxsw/minimal.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21mlxsw: core: Add support for module EEPROM read by pageIdo Schimmel1-0/+13
Add support for ethtool_ops::get_module_eeprom_by_page() which allows user space to read transceiver module EEPROM based on passed parameters. The I2C address is not validated in order to avoid module-specific code. In case of wrong address, error will be returned from device's firmware. Tested by comparing output with legacy method (ioctl) output. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-18mlxsw: Verify the accessed index doesn't exceed the array lengthDanielle Ratson1-0/+4
There are few cases in which an array index queried from a fw register, is accessed without any validation that it doesn't exceed the array length. Add a proper length validation, so accessing memory past the end of an array will be forbidden. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-15mlxsw: Ignore ports that are connected to eXtended mezanineJiri Pirko1-1/+2
Use the info stored in the bus_info struct about the eXtended mezanine connected ports and don't expose them. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-09mlxsw: Set port split ability attribute in driverDanielle Ratson1-2/+2
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the split ability of the port as well, based on port_mapping->width field and split attribute of devlink port in spectrum, so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09mlxsw: Set number of port lanes attribute in driverDanielle Ratson1-1/+1
Currently, port attributes like flavour, port number and whether the port was split are set when initializing a port. Set the number of lanes of the port as well so that it could be easily passed to devlink in the next patch. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()'Christophe JAILLET1-1/+1
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: minimal: Add validation for FW versionVadim Pasternak1-0/+30
Add validation for FW version in order to prevent driver initialization in case FW version is older than expected. FW version validation is necessary, because use of a new field 'num_of_modules' in MGPIR register is not backward compatible. FW 'minor' and 'subminor' versions are expected to be greater than or equal to 2000 and 1886, respectively. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko1-1/+2
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko1-0/+1
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30mlxsw: i2c: Extend initialization with querying firmware infoVadim Pasternak1-0/+18
Extend initialization flow with query request for firmware info in order to obtain firmware version info. This info is to be provided to minimal driver to support ethtool get_drvinfo() interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05mlxsw: Remove ndo_get_port_parent_id implementationJiri Pirko1-13/+0
Remove implementation of get_port_parent_id ndo and rely on core calling into devlink for the information directly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05mlxsw: Pass switch ID through devlink_port_attrs_set()Jiri Pirko1-1/+3
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Remove ndo_get_phys_port_name implementationJiri Pirko1-11/+0
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Implement ndo_get_devlink_portJiri Pirko1-0/+11
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24mlxsw: Move devlink_port_attrs_set() call before registerJiri Pirko1-2/+3
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-13mlxsw: minimal: Initialize base_macJiri Pirko1-0/+18
Currently base_mac is not initialized which causes wrong reporting of zeroed parent_id to userspace. Fix this by initializing base_mac properly. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mlxsw: i2c: Extend initialization by querying resources dataVadim Pasternak1-5/+6
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mlxsw: minimal: Add ethtool supportVadim Pasternak1-2/+322
The minimal driver is chip independent and uses I2C bus for chip access. Its purpose is to support chassis management on systems equipped with Mellanox switch ASICs. For example from BMC (Board Management Controller) device. Expose a dummy netdev for each front panel port and implement basic ethtool operations to obtain QSFP/SFP module info through ethtool. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04mlxsw: minimal: Make structures and variables names shorterVadim Pasternak1-18/+18
Replace "mlxsw_minimal" by "mlxsw_m" in order to improve code readability. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko1-33/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17mlxsw: minimal: Add I2C support for Mellanox ASICsVadim Pasternak1-0/+97
Add I2C access support for Mellanox ASICs: - Virtual Protocol Interconnect switches SwitchX, SwitchX2, providing InfiniBand, Ethernet and Fibre Channel connectivity; - Infiniband switches SwitchIB, SwitchIB2: - Ethernet switch Spectrum. Example of probing activation: echo mlxsw_minimal 0x48 > /sys/bus/i2c/devices/i2c-2/new_device Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-04 17:13:41 +0300