Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- BPF:
- add syscall program type and libbpf support for generating
instructions and bindings for in-kernel BPF loaders (BPF loaders
for BPF), this is a stepping stone for signed BPF programs
- infrastructure to migrate TCP child sockets from one listener to
another in the same reuseport group/map to improve flexibility
of service hand-off/restart
- add broadcast support to XDP redirect
- allow bypass of the lockless qdisc to improving performance (for
pktgen: +23% with one thread, +44% with 2 threads)
- add a simpler version of "DO_ONCE()" which does not require jump
labels, intended for slow-path usage
- virtio/vsock: introduce SOCK_SEQPACKET support
- add getsocketopt to retrieve netns cookie
- ip: treat lowest address of a IPv4 subnet as ordinary unicast
address allowing reclaiming of precious IPv4 addresses
- ipv6: use prandom_u32() for ID generation
- ip: add support for more flexible field selection for hashing
across multi-path routes (w/ offload to mlxsw)
- icmp: add support for extended RFC 8335 PROBE (ping)
- seg6: add support for SRv6 End.DT46 behavior
- mptcp:
- DSS checksum support (RFC 8684) to detect middlebox meddling
- support Connection-time 'C' flag
- time stamping support
- sctp: packetization Layer Path MTU Discovery (RFC 8899)
- xfrm: speed up state addition with seq set
- WiFi:
- hidden AP discovery on 6 GHz and other HE 6 GHz improvements
- aggregation handling improvements for some drivers
- minstrel improvements for no-ack frames
- deferred rate control for TXQs to improve reaction times
- switch from round robin to virtual time-based airtime scheduler
- add trace points:
- tcp checksum errors
- openvswitch - action execution, upcalls
- socket errors via sk_error_report
Device APIs:
- devlink: add rate API for hierarchical control of max egress rate
of virtual devices (VFs, SFs etc.)
- don't require RCU read lock to be held around BPF hooks in NAPI
context
- page_pool: generic buffer recycling
New hardware/drivers:
- mobile:
- iosm: PCIe Driver for Intel M.2 Modem
- support for Qualcomm MSM8998 (ipa)
- WiFi: Qualcomm QCN9074 and WCN6855 PCI devices
- sparx5: Microchip SparX-5 family of Enterprise Ethernet switches
- Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)
- NXP SJA1110 Automotive Ethernet 10-port switch
- Qualcomm QCA8327 switch support (qca8k)
- Mikrotik 10/25G NIC (atl1c)
Driver changes:
- ACPI support for some MDIO, MAC and PHY devices from Marvell and
NXP (our first foray into MAC/PHY description via ACPI)
- HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx
- Mellanox/Nvidia NIC (mlx5)
- NIC VF offload of L2 bridging
- support IRQ distribution to Sub-functions
- Marvell (prestera):
- add flower and match all
- devlink trap
- link aggregation
- Netronome (nfp): connection tracking offload
- Intel 1GE (igc): add AF_XDP support
- Marvell DPU (octeontx2): ingress ratelimit offload
- Google vNIC (gve): new ring/descriptor format support
- Qualcomm mobile (rmnet & ipa): inline checksum offload support
- MediaTek WiFi (mt76)
- mt7915 MSI support
- mt7915 Tx status reporting
- mt7915 thermal sensors support
- mt7921 decapsulation offload
- mt7921 enable runtime pm and deep sleep
- Realtek WiFi (rtw88)
- beacon filter support
- Tx antenna path diversity support
- firmware crash information via devcoredump
- Qualcomm WiFi (wcn36xx)
- Wake-on-WLAN support with magic packets and GTK rekeying
- Micrel PHY (ksz886x/ksz8081): add cable test support"
* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
tcp: change ICSK_CA_PRIV_SIZE definition
tcp_yeah: check struct yeah size at compile time
gve: DQO: Fix off by one in gve_rx_dqo()
stmmac: intel: set PCI_D3hot in suspend
stmmac: intel: Enable PHY WOL option in EHL
net: stmmac: option to enable PHY WOL with PMT enabled
net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
net: use netdev_info in ndo_dflt_fdb_{add,del}
ptp: Set lookup cookie when creating a PTP PPS source.
net: sock: add trace for socket errors
net: sock: introduce sk_error_report
net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
net: dsa: include fdb entries pointing to bridge in the host fdb list
net: dsa: include bridge addresses which are local in the host fdb list
net: dsa: sync static FDB entries on foreign interfaces to hardware
net: dsa: install the host MDB and FDB entries in the master's RX filter
net: dsa: reference count the FDB addresses at the cross-chip notifier level
net: dsa: introduce a separate cross-chip notifier type for host FDBs
net: dsa: reference count the MDB entries at the cross-chip notifier level
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
|
|
We recently changed these two pointers from void pointers to struct
pointers and it breaks the pointer math so now the "txphdr" points
beyond the end of the buffer.
Fixes: 56a967c4f7e5 ("net: qualcomm: rmnet: Remove some unneeded casts")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove broken task->state references and let wake_up_process() DTRT.
The anti-pattern in these patches breaks the ordering of ->state vs
COND as described in the comment near set_current_state() and can lead
to missed wakeups:
(OoO load, observes RUNNING)<-.
for (;;) { |
t->state = UNINTERRUPTIBLE; |
smp_mb(); ,-----> | (observes !COND)
| /
if (COND) ---------' | COND = 1;
break; `- if (t->state != RUNNING)
wake_up_process(t); // not done
schedule(); // forever waiting
}
t->state = TASK_RUNNING;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.160855222@infradead.org
|
|
Remove the explicit casts in the checksum complement functions
and pass the actual protocol specific headers instead.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The idiomatic way to handle the changelink flags/mask pair seems to be
allow partial updates of the driver's link flags. In contrast the rmnet
driver masks the incoming flags and then use that as the new flags.
Change the rmnet driver to follow the common scheme, before the
introduction of IFLA_RMNET_FLAGS handling in iproute2 et al.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A recent change tidied up some conditional code, avoiding the use of
some #ifdefs. Unfortunately, if CONFIG_IPV6 was not enabled, it
meant that two functions were referenced but never defined.
The easiest fix is to just define stubs for these functions if
CONFIG_IPV6 is not defined. This will soon be simplified further
by some other development in the works...
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 75db5b07f8c39 ("net: qualcomm: rmnet: eliminate some ifdefs")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure
statistics on a given CPU are collected atomically. If one of the
statistics values gets updated within the begin/retry window, the
loop will run again.
Currently the statistics totals are updated inside that window.
This means that if the loop ever retries, the statistics for the
CPU will be counted more than once.
Fix this by taking a snapshot of a CPU's statistics inside the
protected window, and then updating the counters with the snapshot
values after exiting the loop.
(Also add a newline at the end of this file...)
Fixes: 192c4b5d48f2a ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't support any extension headers for IPv6 packets. Extension
headers therefore contribute 0 bytes to the payload length. As a
result we can just use the IPv6 payload length as the length used to
compute the pseudo header checksum for both UDP and TCP messages.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We compare a payload checksum with a pseudo checksum value for
equality in rmnet_map_ipv4_dl_csum_trailer(). Both of those values
are computed with a unary NOT (~) operation. The result of the
comparison is the same if we omit that NOT for both values.
Remove these operations in rmnet_map_ipv6_dl_csum_trailer() also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The csum_value field in the rmnet_map_dl_csum_trailer structure is a
"real" Internet checksum. It is a 16 bit value, in big endian format,
which represents an inverted ones' complement sum over pairs of bytes.
Make that clear by changing its type to __sum16.
This makes a typecast in rmnet_map_ipv4_dl_csum_trailer() and
another in rmnet_map_ipv6_dl_csum_trailer() unnecessary.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous patch makes rmnet_map_ipv4_dl_csum_trailer() return
early with an error if it is determined that the computed checksum
for the IP payload does not match what was expected.
If the computed checksum *does* match the expected value, the IP
payload (i.e., the transport message), can be considered good.
There is no need to do any further processing of the message.
This means a big block of code is unnecessary for validating the
transport checksum value, and can be removed.
Make comparable changes in rmnet_map_ipv6_dl_csum_trailer().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv4_dl_csum_trailer(), if the sum of the trailer
checksum and the pseudo checksum is non-zero, checksum validation
has failed. We can return an error as soon as we know that.
We can do the same thing in rmnet_map_ipv6_dl_csum_trailer().
Add some comments that explain where we're headed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch simply demonstrates that a checksum value computed when
verifying an offloaded transport checksum value for both IPv4 and
IPv6 is (normally) 0. It can be squashed into the next patch.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the ones' complement arithmetic, the sum of two negated values
is equal to the negation of the sum of the two original values [1].
Rearrange the calculation ip6_payload_sum using this property.
[1] https://tools.ietf.org/html/rfc1071
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv4_dl_csum_trailer(), remove the "csum_temp" and
"addend" local variables, and simplify a few lines of code.
Remove the "csum_temp", "csum_value", "ip6_hdr_csum", and "addend"
local variables in rmnet_map_ipv6_dl_csum_trailer(), and simplify a
few lines of code there as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the previous patch IPv4 download checksum offload code was
updated to avoid unnecessary byte swapping, based on properties of
the Internet checksum algorithm. This patch makes comparable
changes to the IPv6 download checksum offload handling.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Internet checksums are used for IPv4 header checksum, as well as TCP
segment and UDP datagram checksums. Such a checksum represents the
negated sum of adjacent pairs of bytes, using ones' complement
arithmetic.
One property of the Internet checkum is byte order independence [1].
Specifically, the sum of byte-swapped pairs is equal to the result
of byte swapping the sum of those same pairs when not byte-swapped.
So for example if a, b, c, d, y, and z are hexadecimal digits, and
PLUS represents ones' complement addition:
If: ab PLUS cd = yz
Then: ba PLUS dc = zy
For this reason, there is no need to swap the order of bytes in the
checksum value held in a message header, nor the one in the QMAPv4
trailer, in order to operate on them.
In other words, we can determine whether the hardware-computed
checksum matches the one in the message header without any byte
swaps.
(This patch leaves in place all existing type casts.)
[1] https://tools.ietf.org/html/rfc1071
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv6_dl_csum_trailer() there is an especially involved
line of code that determines the ones' complement sum of the IPv6
packet header (in host byte order). Simplify that by storing the
result of computing just the header checksum in a local variable,
then using that in the original assignment.
Use the size of the IPv6 header structure as the number of bytes to
checksum, rather than computing the offset to the transport header.
And use ip_fast_csum() rather than ipa_compute_csum(), knowing that
the size of an IPv6 header (40 bytes) is a multiple of 4 bytes
greater than 16.
Add some comments to match rmnet_map_ipv4_dl_csum_trailer().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv4_dl_csum_trailer(), an illegal checksum subtraction
is done, subtracting hdr_csum (in host byte order) from csum_value (in
network byte order). Despite being illegal, it generally works,
because it turns out the value subtracted is (or should be) always 0,
which has the same representation in either byte order.
Doing illegal operations is not good form though, so fix this by
verifying the IP header checksum early in that function. If its
checksum is non-zero, the packet will be bad, so just return an
error. This will cause the packet to passed to the IP layer where
it can be dropped.
Thereafter, there is no need subtract the IP header checksum from
the checksum value in the trailer because we know it is zero.
Add a comment explaining this.
This type of packet error is different from other types, so add a
new statistics counter to track this condition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The checksum fields of the TCP and UDP header structures already
have type __sum16. We don't support any other protocol headers, so
we can simplify rmnet_map_get_csum_field(), getting rid of the local
variable entirely and just returning the appropriate address.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The value passed as an argument to rmnet_map_ipv4_ul_csum_header()
is always an IPv4 header. Rather than using a local variable, just
have the type of the argument reflect the proper type.
In rmnet_map_ipv6_ul_csum_header() things are defined a little
differently, but make the same basic change there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If IPV6 is not enabled in the kernel configuration, the RMNet
checksum code indicates a buffer containing an IPv6 packet is not
supported. The same thing happens if a buffer contains something
other than an IPv4 or IPv6 packet.
We can rearrange things a bit in two functions so that some #ifdef
calls can simply be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv4_dl_csum_trailer() use ip_is_fragment() to
determine whether a socket buffer contains a packet fragment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5
checksum offload") broke ingress handling for devices where
RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are
not set. Unless either of these flags are set, the MAP header is not
removed. This commit restores the original logic by ensuring that the
MAP header is removed for all MAP packets.
Fixes: e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang warns that proto in rmnet_map_v5_checksum_uplink_packet() might be
used uninitialized:
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:14: warning:
variable 'proto' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
} else if (skb->protocol == htons(ETH_P_IPV6)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:295:36: note:
uninitialized use occurs here
check = rmnet_map_get_csum_field(proto, trans);
^~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:10: note:
remove the 'if' if its condition is always true
} else if (skb->protocol == htons(ETH_P_IPV6)) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:270:11: note:
initialize the variable 'proto' to silence this warning
u8 proto;
^
= '\0'
1 warning generated.
This is technically a false positive because there is an if statement
above this one that checks skb->protocol for not being either
ETH_P_IP{,V6}. However, it is more obvious to sink that into the if
statement as an else branch, which makes the code clearer and fixes the
warning.
At the same time, move the "IS_ENABLED(CONFIG_IPV6)" into the else if
condition so that the else branch of the preprocessor conditional can
be shared, since there is no build failure with CONFIG_IPV6 disabled.
Fixes: b6e5d27e32ef ("net: ethernet: rmnet: Add support for MAPv5 egress packets")
Link: https://github.com/ClangBuiltLinux/linux/issues/1390
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding support for MAPv5 egress packets.
This involves adding the MAPv5 header and setting the csum_valid_required
in the checksum header to request HW compute the checksum.
Corresponding stats are incremented based on whether the checksum is
computed in software or HW.
New stat has been added which represents the count of packets whose
checksum is calculated by the HW.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding support for processing of MAPv5 downlink packets.
It involves parsing the Mapv5 packet and checking the csum header
to know whether the hardware has validated the checksum and is
valid or not.
Based on the checksum valid bit the corresponding stats are
incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY
or left as CHEKSUM_NONE to let network stack revalidate the checksum
and update the respective snmp stats.
Current MAPV1 header has been modified, the reserved field in the
Mapv1 header is now used for next header indication.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to identify significant signature issues add a new stat counter,
which increases on bad signature values that causes a sync loss.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting a new network key would cause a reset of the QCA7000. Usually
the driver only notice the SPI interrupt and a single signature error.
So avoid the whole re-sync process (possible packet loss, transmit queue
stop and no carrier for at least 1 second) in this case.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no need to read the signature three times. So bail out
in case the second check failed.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In emac_mac_tx_buf_send, it calls emac_tx_fill_tpd(..,skb,..).
If some error happens in emac_tx_fill_tpd(), the skb will be freed via
dev_kfree_skb(skb) in error branch of emac_tx_fill_tpd().
But the freed skb is still used via skb->len by netdev_sent_queue(,skb->len).
As i observed that emac_tx_fill_tpd() haven't modified the value of skb->len,
thus my patch assigns skb->len to 'len' before the possible free and
use 'len' instead of skb->len later.
Fixes: b9b17debc69d2 ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the use of C bit-fields in the rmnet_map_ul_csum_header
structure with a single two-byte (big endian) structure member,
and use masks to encode or get values within it. The content of
these fields can be accessed using simple bitwise AND and OR
operations on the (host byte order) value of the new structure
member.
Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field
values in host byte order, then forcibly fix their byte order using
a combination of byte swap operations and types.
Instead, just compute the value that needs to go into the new
structure member and save it with a simple byte-order conversion.
Make similar simplifications in rmnet_map_ipv6_ul_csum_header().
Finally, in rmnet_map_checksum_uplink_packet() a set of assignments
zeroes every field in the upload checksum header. Replace that with
a single memset() operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the use of C bit-fields in the rmnet_map_dl_csum_trailer
structure with a single one-byte field, using constant field masks
to encode or get at embedded values.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The actual layout of bits defined in C bit-fields (e.g. int foo : 3)
is implementation-defined. Structures defined in <linux/if_rmnet.h>
address this by specifying all bit-fields twice, to cover two
possible layouts.
I think this pattern is repetitive and noisy, and I find the whole
notion of compiler "bitfield endianness" to be non-intuitive.
Stop using C bit-fields for the command/data flag and the pad length
fields in the rmnet_map structure, and define a single-byte flags
field instead. Define a mask for the single-bit "command" flag,
and another mask for the encoded pad length. The content of both
fields can be accessed using a simple bitwise AND operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following macros, defined in "rmnet_map.h", assume a socket
buffer is provided as an argument without any real indication this
is the case.
RMNET_MAP_GET_MUX_ID()
RMNET_MAP_GET_CD_BIT()
RMNET_MAP_GET_PAD()
RMNET_MAP_GET_CMD_START()
RMNET_MAP_GET_LENGTH()
What they hide is pretty trivial accessing of fields in a structure,
and it's much clearer to see this if we do these accesses directly.
So rather than using these accessor macros, assign a local
variable of the map header pointer type to the socket buffer data
pointer, and derereference that pointer variable.
In "rmnet_map_data.c", use sizeof(object) rather than sizeof(type)
in one spot. Also, there's no need to byte swap 0; it's all zeros
irrespective of endianness.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In rmnet_map_ipv4_ul_csum_header() and rmnet_map_ipv6_ul_csum_header()
the offset within a packet at which checksumming should commence is
calculated. This calculation involves byte swapping and a forced type
conversion that makes it hard to understand.
Simplify this by computing the offset in host byte order, then
converting the result when assigning it into the header field.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no guarantee that rmnet rx_handler is only fed with linear
skbs, but current rmnet implementation does not check that, leading
to crash in case of non linear skbs processed as linear ones.
Fix that by ensuring skb linearization before processing.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Link: https://lore.kernel.org/r/1612428002-12333-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Packets sent by rmnet to the real device have variable MAP header
lengths based on the data format configured. This patch adds checks
to ensure that the real device MTU is sufficient to transmit the MAP
packet comprising of the MAP header and the IP packet. This check
is enforced when rmnet devices are created and updated and during
MTU updates of both the rmnet and real device.
Additionally, rmnet devices now have a default MTU configured which
accounts for the real device MTU and the headroom based on the data
format.
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
linux/netdevice.h is included in very many places, touching any
of its dependecies causes large incremental builds.
Drop the linux/ethtool.h include, linux/netdevice.h just needs
a forward declaration of struct ethtool_ops.
Fix all the places which made use of this implicit include.
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Shannon Nelson <snelson@pensando.io>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20201120225052.1427503-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During rmnet unregistration, the real device rx_handler is first cleared
followed by the removal of rx_handler_data after the rcu synchronization.
Any packets in the receive path may observe that the rx_handler is NULL.
However, there is no check when dereferencing this value to use the
rmnet_port information.
This fixes following splat by adding the NULL check.
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000000d
pc : rmnet_rx_handler+0x124/0x284
lr : rmnet_rx_handler+0x124/0x284
rmnet_rx_handler+0x124/0x284
__netif_receive_skb_core+0x758/0xd74
__netif_receive_skb+0x50/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Link: https://lore.kernel.org/r/1605298325-3705-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As part of the W=1 cleanups for ethernet, a million [*] driver
comments had to be cleaned up to get the W=1 compilation to
succeed. This change finally makes the drivers/net/ethernet tree
compile with W=1 set on the command line. NOTE: The kernel uses
kdoc style (see Documentation/process/kernel-doc.rst) when
documenting code, not doxygen or other styles.
After this patch the x86_64 build has no warnings from W=1, however
scripts/kernel-doc says there are 1545 more warnings in source files, that
I need to develop a script to fix in a followup patch.
The errors fixed here are all kdoc of a few classes, with a few outliers:
In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10:
drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=]
1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff };
| ^~~~~~~~~~~~~~
... repeats 4 times...
drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
2084 | RX_USED_ADD(page, i);
drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’:
drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
603 | u32 tbisr, tanar, tanlpar;
| ^~~~~
drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’:
drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
1207 | u32 cfg, tanar, tbicr;
| ^~~~~
drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
1063 | int data_size, yf_size;
| ^~~~~~~
Normal kdoc fixes:
warning: Function parameter or member 'x' not described in 'y'
warning: Excess function parameter 'x' description in 'y'
warning: Cannot understand <string> on line <NNN> - I thought it was a doc line
[*] - ok it wasn't quite a million, but it felt like it.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only usage of qca_serdev_ops is to pass its address to
serdev_device_set_client_ops() which takes a const pointer. Make it
const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
emac_clks_phase1_init
Fix the missing clk_disable_unprepare() before return
from emac_clks_phase1_init() in the error handling case.
Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rmnet can have only two bridge interface.
One of them is a link interface and another one is added by
the master operation.
rmnet interface shouldn't allow adding additional
bridge interfaces by mater operation.
But, there is no code to deny additional interfaces.
So, interface leak occurs.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link set dummy1 master rmnet0
ip link set dummy2 master rmnet0
ip link del rmnet0
In the above test command, the dummy0 was attached to rmnet as VND mode.
Then, dummy1 was attached to rmnet0 as BRIDGE mode.
At this point, dummy0 mode is switched from VND to BRIDGE automatically.
Then, dummy2 is attached to rmnet as BRIDGE mode.
At this point, rmnet0 should deny this operation.
But, rmnet0 doesn't deny this.
So that below splat occurs when the rmnet0 interface is deleted.
Splat looks like:
[ 186.684787][ C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[ 186.684788][ C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x
[ 186.684805][ C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621
[ 186.684807][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 186.684808][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0
[ 186.684811][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5
[ 186.684812][ C2] RSP: 0018:ffff8880cd9472e0 EFLAGS: 00010287
[ 186.684815][ C2] RAX: ffff8880cc56da58 RBX: ffff8880ab21c000 RCX: ffffffff9329d323
[ 186.684816][ C2] RDX: 1ffffffff2be6410 RSI: 0000000000000008 RDI: ffffffff95f32080
[ 186.684818][ C2] RBP: dffffc0000000000 R08: fffffbfff2be6411 R09: fffffbfff2be6411
[ 186.684819][ C2] R10: ffffffff95f32087 R11: 0000000000000001 R12: ffff8880cd947480
[ 186.684820][ C2] R13: ffff8880ab21c0b8 R14: ffff8880cd947400 R15: ffff8880cdf10640
[ 186.684822][ C2] FS: 00007f00843890c0(0000) GS:ffff8880d4e00000(0000) knlGS:0000000000000000
[ 186.684823][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 186.684825][ C2] CR2: 000055b8ab1077b8 CR3: 00000000ab612006 CR4: 00000000000606e0
[ 186.684826][ C2] Call Trace:
[ 186.684827][ C2] ? lockdep_hardirqs_on_prepare+0x379/0x540
[ 186.684829][ C2] ? netif_set_real_num_tx_queues+0x780/0x780
[ 186.684830][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 186.684831][ C2] ? __kasan_slab_free+0x126/0x150
[ 186.684832][ C2] ? kfree+0xdc/0x320
[ 186.684834][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 186.684835][ C2] unregister_netdevice_many.part.135+0x13/0x1b0
[ 186.684836][ C2] rtnl_delete_link+0xbc/0x100
[ ... ]
[ 238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1
Fixes: 037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are two types of the lower interface of rmnet that are VND
and BRIDGE.
Each lower interface can have only one type either VND or BRIDGE.
But, there is a case, which uses both lower interface types.
Due to this unexpected behavior, lower interface leak occurs.
Test commands:
ip link add dummy0 type dummy
ip link add dummy1 type dummy
ip link add rmnet0 link dummy0 type rmnet mux_id 1
ip link set dummy1 master rmnet0
ip link add rmnet1 link dummy1 type rmnet mux_id 2
ip link del rmnet0
The dummy1 was attached as BRIDGE interface of rmnet0.
Then, it also was attached as VND interface of rmnet1.
This is unexpected behavior and there is no code for handling this case.
So that below splat occurs when the rmnet0 interface is deleted.
Splat looks like:
[ 53.254112][ C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0
[ 53.254117][ C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx
[ 53.254182][ C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620
[ 53.254188][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 53.254192][ C1] RIP: 0010:rollback_registered_many+0x986/0xcf0
[ 53.254200][ C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5
[ 53.254205][ C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287
[ 53.254214][ C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323
[ 53.254219][ C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080
[ 53.254223][ C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411
[ 53.254228][ C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480
[ 53.254233][ C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40
[ 53.254238][ C1] FS: 00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000
[ 53.254243][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 53.254248][ C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0
[ 53.254253][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 53.254257][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 53.254261][ C1] Call Trace:
[ 53.254266][ C1] ? lockdep_hardirqs_on_prepare+0x379/0x540
[ 53.254270][ C1] ? netif_set_real_num_tx_queues+0x780/0x780
[ 53.254275][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 53.254279][ C1] ? __kasan_slab_free+0x126/0x150
[ 53.254283][ C1] ? kfree+0xdc/0x320
[ 53.254288][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet]
[ 53.254293][ C1] unregister_netdevice_many.part.135+0x13/0x1b0
[ 53.254297][ C1] rtnl_delete_link+0xbc/0x100
[ 53.254301][ C1] ? rtnl_af_register+0xc0/0xc0
[ 53.254305][ C1] rtnl_dellink+0x2dc/0x840
[ 53.254309][ C1] ? find_held_lock+0x39/0x1d0
[ 53.254314][ C1] ? valid_fdb_dump_strict+0x620/0x620
[ 53.254318][ C1] ? rtnetlink_rcv_msg+0x457/0x890
[ 53.254322][ C1] ? lock_contended+0xd20/0xd20
[ 53.254326][ C1] rtnetlink_rcv_msg+0x4a8/0x890
[ ... ]
[ 73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1
Fixes: 037f9cdf72fb ("net: rmnet: use upper/lower device infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|