Age | Commit message (Collapse) | Author | Files | Lines | |
---|---|---|---|---|---|
2021-05-24 | net: r6040: Allow restarting auto-negotiation | Florian Fainelli | 1 | -0/+1 | |
Use phy_ethtool_nway_reset() since the driver makes use of the PHY library. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-05-24 | net: r6040: Use ETH_FCS_LEN | Florian Fainelli | 1 | -2/+2 | |
Instead of the open coded constant 4. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2021-05-24 | net: r6040: Use logical or for MDIO operations | Florian Fainelli | 1 | -2/+2 | |
This is not a functional change, but we should be using a logical or to assign the bits we will be writing to the MDIO read and write registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-07-21 | r6040: switch from 'pci_' to 'dma_' API | Christophe JAILLET | 1 | -30/+34 | |
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'r6040_open()', GFP_KERNEL can be used because this is a net_device_ops' 'ndo_open' function. This function is protected by the rtnl_lock() semaphore. So only a mutex is used and no spin_lock is acquired. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2020-06-13 | treewide: replace '---help---' in Kconfig files with 'help' | Masahiro Yamada | 1 | -2/+2 | |
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | |||||
2020-01-21 | net: convert suitable network drivers to use phy_do_ioctl | Heiner Kallweit | 1 | -9/+1 | |
Convert suitable network drivers to use phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-12-13 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 1 | -1/+1 | |
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2019-05-21 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 1 | Thomas Gleixner | 1 | -15/+1 | |
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option [no]_[pad]_[ctrl] any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin street fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 176 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.652910950@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||||
2019-05-21 | treewide: Add SPDX license identifier - Makefile/Kconfig | Thomas Gleixner | 2 | -0/+2 | |
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||||
2019-04-02 | net: move skb->xmit_more hint to softnet data | Florian Westphal | 1 | -1/+1 | |
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2018-09-13 | net: ethernet: Use phy_set_max_speed() to limit advertised speed | Andrew Lunn | 1 | -10/+2 | |
Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-12-18 | r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detected | Manuel Bessler | 1 | -5/+5 | |
'ifconfig eth0 down' makes r6040_close() trigger: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue() to outside of the module's private spin_lock_irq block. Found on a Versalogic Tomcat SBC with a Vortex86 SoC s1660e_5150:~# sudo ifconfig eth0 down [ 61.306415] ====================================================== [ 61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted [ 61.306415] ------------------------------------------------------ [ 61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 61.306415] (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] and this task is already holding: [ 61.306415] (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] which would create a new lock dependency: [ 61.306415] (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...} [ 61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 61.306415] (&(&lp->lock)->rlock){+.-...} [ 61.306415] ... which became SOFTIRQ-irq-safe at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] to a SOFTIRQ-irq-unsafe lock: [ 61.306415] (&dev->lock){+.+...} [ 61.306415] ... which became SOFTIRQ-irq-unsafe at: [ 61.306415] ...[ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] other info that might help us debug this: [ 61.306415] [ 61.306415] Possible interrupt unsafe locking scenario: [ 61.306415] [ 61.306415] CPU0 CPU1 [ 61.306415] ---- ---- [ 61.306415] lock(&dev->lock); [ 61.306415] local_irq_disable(); [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] lock(&dev->lock); [ 61.306415] <Interrupt> [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] [ 61.306415] *** DEADLOCK *** [ 61.306415] [ 61.306415] 2 locks held by ifconfig/449: [ 61.306415] #0: (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20 [ 61.306415] #1: (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] [ 61.306415] [ 61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30 [ 61.306415] [ 61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040] [ 61.306415] [ 61.306415] [<c13a5577>] net_rx_action+0x197/0x340 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40 [ 61.306415] [ 61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180 [ 61.306415] [ 61.306415] [<c105c84e>] kthread+0xde/0x110 [ 61.306415] [ 61.306415] [<c14bb949>] ret_from_fork+0x19/0x30 [ 61.306415] IN-SOFTIRQ-W at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040] [ 61.306415] [ 61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0 [ 61.306415] [ 61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd [ 61.306415] [ 61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0 [ 61.306415] [ 61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0 [ 61.306415] [ 61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40 [ 61.306415] [ 61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20 [ 61.306415] [ 61.306415] [<c13a9d19>] register_netdevice+0x409/0x550 [ 61.306415] [ 61.306415] [<c13a9e72>] register_netdev+0x12/0x20 [ 61.306415] [ 61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040] [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] the dependencies between the lock to be acquired[ 61.306415] and SOFTIRQ-irq-unsafe lock: [ 61.306415] -> (&dev->lock){+.+...} ops: 56 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] SOFTIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<c1f28f39>] __key.43998+0x0/0x8 [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] [ 61.306415] stack backtrace: [ 61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1 [ 61.306415] Call Trace: [ 61.306415] dump_stack+0x16/0x19 [ 61.306415] check_usage+0x3f6/0x550 [ 61.306415] ? check_usage+0x4d/0x550 [ 61.306415] check_irq_usage+0x42/0xb0 [ 61.306415] __lock_acquire+0x110c/0x1770 [ 61.306415] lock_acquire+0x7c/0x150 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] ? r6040_close+0x24/0x230 [r6040] [ 61.306415] ? __delay+0x9/0x10 [ 61.306415] phy_stop+0x16/0x80 [ 61.306415] r6040_close+0x89/0x230 [r6040] [ 61.306415] __dev_close_many+0x61/0xa0 [ 61.306415] __dev_close+0x1f/0x30 [ 61.306415] __dev_change_flags+0x87/0x150 [ 61.306415] dev_change_flags+0x23/0x60 [ 61.306415] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] inet_ioctl+0x65/0x90 [ 61.306415] sock_ioctl+0x124/0x2b0 [ 61.306415] ? dlci_ioctl_set+0x30/0x30 [ 61.306415] do_vfs_ioctl+0x7c/0x790 [ 61.306415] ? trace_hardirqs_on+0xb/0x10 [ 61.306415] ? call_rcu_sched+0xd/0x10 [ 61.306415] ? __put_cred+0x32/0x50 [ 61.306415] ? SyS_faccessat+0x178/0x1e0 [ 61.306415] SyS_ioctl+0x28/0x50 [ 61.306415] do_int80_syscall_32+0x3f/0x110 [ 61.306415] entry_INT80_32+0x2f/0x2f [ 61.306415] EIP: 0xb764d364 [ 61.306415] EFLAGS: 00000286 CPU: 0 [ 61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c [ 61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58 [ 61.306415] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 63.836607] r6040 0000:00:08.0 eth0: Link is Down Signed-off-by: Manuel Bessler <manuel.bessler@sensus.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-10-13 | net: deprecate eth_change_mtu, remove usage | Jarod Wilson | 1 | -1/+0 | |
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-09-19 | net: r6040: add in missing white space in error message text | Colin Ian King | 1 | -4/+2 | |
A couple of dev_err messages span two lines and the literal string is missing a white space between words. Add the white space and join the two lines into one. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: FLorian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Bump version and date | Florian Fainelli | 1 | -2/+2 | |
Bump version to 0.28 and date to 4th of July 2016. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Update my email | Florian Fainelli | 1 | -2/+2 | |
Update my email address in the driver and MAINTAINERS file. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Utilize napi_complete_done() | Florian Fainelli | 1 | -1/+1 | |
We maintain how much work we did in NAPI context, so provide that with napi_complete_done(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Utilize __napi_schedule_irqoff | Florian Fainelli | 1 | -1/+1 | |
We are already in hard IRQ context, so we can use __napi_schedule_irqoff() to save a few operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Check for skb->xmit_more | Florian Fainelli | 1 | -1/+2 | |
Kick the transmission only if this is the last SKB to transmit or the queue is not already stopped. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Reclaim transmitted buffers in NAPI | Florian Fainelli | 1 | -9/+8 | |
Instead of taking one interrupt per packet transmitted, re-use the same NAPI context to free transmitted buffers. Since we are no longer in hard IRQ context replace dev_kfree_skb_irq() by dev_kfree_skb(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Utilize skb_put_padto() | Florian Fainelli | 1 | -5/+4 | |
Pad the SKB to the minimum length of ETH_ZLEN by using skb_put_padto() and take this operation out of the critical section since there is no need to check any HW resources before doing that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Increase statistics upon transmit completion | Florian Fainelli | 1 | -3/+5 | |
r6040_xmit() is increasing transmit statistics during transmission while this may still fail, do this in r6040_tx() where we complete transmitted buffers instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-07-05 | net: r6040: Utilize phy_print_status | Florian Fainelli | 1 | -8/+2 | |
Instead of open coding our own version utilize the library provided function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-06-28 | net: ethernet: r6040: use phy_ethtool_{get|set}_link_ksettings | Philippe Reynes | 1 | -12/+2 | |
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-06-28 | net: ethernet: r6040: use phydev from struct net_device | Philippe Reynes | 1 | -15/+7 | |
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-01-07 | mdio: Move allocation of interrupts into core | Andrew Lunn | 1 | -13/+1 | |
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-01-07 | phy: Centralise print about attached phy | Andrew Lunn | 1 | -3/+1 | |
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2016-01-07 | phy: add phydev_name() wrapper | Andrew Lunn | 1 | -2/+2 | |
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2015-06-23 | drivers/net: remove all references to obsolete Ethernet-HOWTO | Paul Gortmaker | 1 | -3/+1 | |
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2014-08-12 | PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use | Benoit Taine | 1 | -1/+1 | |
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> | |||||
2014-03-28 | r6040: remove empty MDIO bus reset function | Florian Fainelli | 1 | -6/+0 | |
r6040_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2014-01-17 | r6040: use ETH_ZLEN instead of MISR for SKB length checking | Florian Fainelli | 1 | -2/+2 | |
Ever since this driver was merged the following code was included: if (skb->len < MISR) skb->len = MISR; MISR is defined to 0x3C which is also equivalent to ETH_ZLEN, but use ETH_ZLEN directly which is exactly what we want to be checking for. Reported-by: Marc Volovic <marcv@ezchip.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2014-01-17 | r6040: add delays in MDIO read/write polling loops | Florian Fainelli | 1 | -0/+2 | |
On newer and faster machines (Vortex X86DX) using the r6040 driver, it was noticed that the driver was returning an error during probing traced down to being the MDIO bus probing and the inability to complete a MDIO read operation in time. It turns out that the MDIO operations on these faster machines usually complete after ~2140 iterations which is bigger than 2048 (MAC_DEF_TIMEOUT) and results in spurious timeouts depending on the system load. Update r6040_phy_read() and r6040_phy_write() to include a 1 micro second delay in each busy-looping iteration of the loop which is a much safer operation than incrementing MAC_DEF_TIMEOUT. Reported-by: Nils Koehler <nils.koehler@ibt-interfaces.de> Reported-by: Daniel Goertzen <daniel.goertzen@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2014-01-16 | drivers/net: delete non-required instances of include <linux/init.h> | Paul Gortmaker | 1 | -1/+0 | |
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-10-22 | net: r6040: remove unnecessary pci_set_drvdata() | Jingoo Han | 1 | -2/+0 | |
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-06-20 | net: Move MII out from under NET_CORE and hide it | Ben Hutchings | 1 | -1/+0 | |
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-03-10 | drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb | Joe Perches | 1 | -1/+0 | |
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-03-07 | r6040: check MDIO register busy waiting result | Florian Fainelli | 1 | -4/+7 | |
We are currently busy waiting for MDIO registers to complete their operation but we did not propagate the result back to the caller. Update r6040_phy_{read,write} to report the busy waiting result accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-02-04 | ethernet: Remove unnecessary alloc/OOM messages, alloc cleanups | Joe Perches | 1 | -2/+1 | |
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-01-15 | net: phy: remove flags argument from phy_{attach, connect, connect_direct} | Florian Fainelli | 1 | -1/+1 | |
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-01-09 | remove init of dev->perm_addr in drivers | Jiri Pirko | 1 | -3/+0 | |
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2013-01-07 | ethtool: fix drvinfo strings set in drivers | Jiri Pirko | 1 | -3/+3 | |
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-12-07 | drivers/net: fix up function prototypes after __dev* removals | Greg Kroah-Hartman | 1 | -2/+1 | |
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-12-03 | r6040: remove __dev* attributes | Bill Pemberton | 1 | -4/+4 | |
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||||
2012-07-10 | r6040: use module_pci_driver macro | Devendra Naga | 1 | -14/+1 | |
as the manual of module_pci_driver says that it can be used when the init and exit functions of the module does nothing but the pci_register_driver and pci_unregister_driver. use it for rdc's r6040 driver, as the init and exit paths does as above, and also this reduces a little amount of code. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-07-08 | r6040: remove duplicate call to the pci_set_drvdata | Devendra Naga | 1 | -1/+0 | |
pci_set_drvdata is called twice at the remove path of driver, call it once. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-05-30 | r6040: Do a Proper deinit at errorpath and also when driver unloads (calling ↵ | Devendra Naga | 1 | -0/+5 | |
r6040_remove_one) so if mdiobus_alloc fails, the errorpath doesnt do a netif_napi_del and also doesn't set the priv data of the driver to NULL. at the driver unload stage the driver doesn't remove the NAPI context, and doesnt' set the priv data to NULL, and also doesn't call the pci_iounmap. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-05-30 | r6040: disable pci device if the subsequent calls (after pci_enable_device) ↵ | Devendra Naga | 1 | -4/+6 | |
fails the calls after the pci_enable_device may fail, and will error out with out disabling it. disable the device at error paths. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-04-13 | r6040: update copyright from 2007 to now | Florian Fainelli | 1 | -1/+1 | |
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> | |||||
2012-04-13 | r6040: define and use bits of register PHY_CC | Florian Fainelli | 1 | -2/+10 | |
Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> |