summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/socionext/netsec.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-3/+7
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-1/+1
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24netsec: Remove rcu_read_lock() around XDP program invocationToke Høiland-Jørgensen1-3/+0
The netsec driver has a rcu_read_lock()/rcu_read_unlock() pair around the full RX loop, covering everything up to and including xdp_do_flush(). This is actually the correct behaviour, but because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), it is also technically redundant. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep the rcu_read_lock() around anymore, so let's just remove it. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/bpf/20210624160609.292325-18-toke@redhat.com
2021-03-26Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-9/+7
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18netsec: restore phy power state after controller resetMian Yousaf Kaukab1-3/+6
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") netsec_netdev_init() power downs phy before resetting the controller. However, the state is not restored once the reset is complete. As a result it is not possible to bring up network on a platform with Broadcom BCM5482 phy. Fix the issue by restoring phy power state after controller reset is complete. Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") Cc: stable@vger.kernel.org Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi1-9/+7
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-01-09net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi1-4/+2
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-09net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi1-2/+1
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-1/+1
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel1-1/+1
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-20net: netsec: add xdp tx return bulking supportLorenzo Bianconi1-1/+11
Convert netsec driver to xdp_return_frame_bulk APIs. Rely on xdp_return_frame_rx_napi for XDP_TX in order to try to recycle the page in the "in-irq" page_pool cache. Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/01487b8f5167d62649339469cdd0c6d8df885902.1605605531.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21netsec: ignore 'phy-mode' device property on ACPI systemsArd Biesheuvel1-7/+17
Since commit bbc4d71d63549bc ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the Realtek PHY driver will override any TX/RX delay set by hardware straps if the phy-mode device property does not match. This is causing problems on SynQuacer based platforms (the only SoC that incorporates the netsec hardware), since many were built with this Realtek PHY, and shipped with firmware that defines the phy-mode as 'rgmii', even though the PHY is configured for TX and RX delay using pull-ups. From the driver's perspective, we should not make any assumptions in the general case that the PHY hardware does not require any initial configuration. However, the situation is slightly different for ACPI boot, since it implies rich firmware with AML abstractions to handle hardware details that are not exposed to the OS. So in the ACPI case, it is reasonable to assume that the PHY comes up in the right mode, regardless of whether the mode is set by straps, by boot time firmware or by AML executed by the ACPI interpreter. So let's ignore the 'phy-mode' device property when probing the netsec driver in ACPI mode, and hardcode the mode to PHY_INTERFACE_MODE_NA, which should work with any PHY provided that it is configured by the time the driver attaches to it. While at it, document that omitting the mode is permitted for DT probing as well, by setting the phy-mode DT property to the empty string. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201018163625.2392-1-ardb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-26bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-3/+0
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-06-26socionext: account for napi_gro_receive never returning GRO_DROPJason A. Donenfeld1-2/+3
The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-02xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi1-1/+1
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
2020-05-15net: netsec: Add support for XDP frame sizeIlias Apalodimas1-12/+18
This driver takes advantage of page_pool PP_FLAG_DMA_SYNC_DEV that can help reduce the number of cache-lines that need to be flushed when doing DMA sync for_device. Due to xdp_adjust_tail can grow the area accessible to the by the CPU (can possibly write into), then max sync length *after* bpf_prog_run_xdp() needs to be taken into account. For XDP_TX action the driver is smart and does DMA-sync. When growing tail this is still safe, because page_pool have DMA-mapped the entire page size. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/bpf/158945336295.97035.15034759661036971024.stgit@firesoul
2020-03-18net: socionext: reject unsupported coalescing paramsJakub Kicinski1-0/+2
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20net: page_pool: API cleanup and commentsIlias Apalodimas1-12/+11
Functions starting with __ usually indicate those which are exported, but should not be called directly. Update some of those declared in the API and make it more readable. page_pool_unmap_page() and page_pool_release_page() were doing exactly the same thing calling __page_pool_clean_page(). Let's rename __page_pool_clean_page() to page_pool_release_page() and export it in order to show up on perf logs and get rid of page_pool_unmap_page(). Finally rename __page_pool_put_page() to page_pool_put_page() since we can now directly call it from drivers and rename the existing page_pool_put_page() to page_pool_put_full_page() since they do the same thing but the latter is trying to sync the full DMA area. This patch also updates netsec, mvneta and stmmac drivers which use those functions. Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19net: socionext: use new helper tcp_v6_gso_csum_prepHeiner Kallweit1-5/+1
Use new helper tcp_v6_gso_csum_prep in additional network drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix xdp_result initialization in netsec_process_rxLorenzo Bianconi1-1/+1
Fix xdp_result initialization in netsec_process_rx in order to not increase rx counters if there is no bpf program attached to the xdp hook and napi_gro_receive returns GRO_DROP Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-27net: socionext: fix possible user-after-free in netsec_process_rxLorenzo Bianconi1-1/+1
Fix possible use-after-free in in netsec_process_rx that can occurs if the first packet is sent to the normal networking stack and the following one is dropped by the bpf program attached to the xdp hook. Fix the issue defining the skb pointer in the 'budget' loop Fixes: ba2b232108d3c ("net: netsec: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22net: convert additional drivers to use phy_do_ioctlHeiner Kallweit1-7/+1
The first batch of driver conversions missed a few cases where we can use phy_do_ioctl too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: socionext: get rid of huge dma sync in netsec_alloc_rx_dataLorenzo Bianconi1-17/+26
Socionext driver can run on dma coherent and non-coherent devices. Get rid of huge dma_sync_single_for_device in netsec_alloc_rx_data since now the driver can let page_pool API to managed needed DMA sync Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-03net: netsec: Change page pool nid to NUMA_NO_NODEIlias Apalodimas1-1/+1
The current driver only exists on a non NUMA aware machine. With 44768decb7c0 ("page_pool: handle page recycle for NUMA_NO_NODE condition") applied we can safely change that to NUMA_NO_NODE and accommodate future NUMA aware hardware using netsec network interface Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: netsec: Correct dma sync for XDP_TX framesIlias Apalodimas1-2/+2
bpf_xdp_adjust_head() can change the frame boundaries. Account for the potential shift properly by calculating the new offset before syncing the buffer to the device for XDP_TX Fixes: ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: socionext: netsec: fix xdp stats accountingLorenzo Bianconi1-2/+3
Increment netdev rx counters even for XDP_DROP verdict. Report even tx bytes for xdp buffers (TYPE_NETSEC_XDP_TX or TYPE_NETSEC_XDP_NDO). Moreover account pending buffer length in netsec_xdp_queue_one as it is done for skb counterpart Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: socionext: netsec: always grab descriptor lockLorenzo Bianconi1-23/+7
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b232108d3 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: netsec: Fix signedness bug in netsec_probe()Dan Carpenter1-1/+1
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-10net: netsec: remove static declaration for netsec_set_tx_de()Ilias Apalodimas1-45/+41
On commit ba2b232108d3 ("net: netsec: add XDP support") a static declaration for netsec_set_tx_de() was added to make the diff easier to read. Now that the patch is merged let's move the functions around and get rid of that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-10net: netsec: remove superfluous if statementIlias Apalodimas1-4/+4
While freeing tx buffers the memory has to be unmapped if the packet was an skb or was used for .ndo_xdp_xmit using the same arguments. Get rid of the unneeded extra 'else if' statement Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: start using buffers if page_pool registration succeededIlias Apalodimas1-8/+9
The current driver starts using page_pool buffers before calling xdp_rxq_info_reg_mem_model(). Start using the buffers after the registration succeeded, so we won't have to call page_pool_request_shutdown() in case of failure Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: core: page_pool: add user refcnt and reintroduce page_pool_destroyIvan Khoronzhuk1-6/+2
Jesper recently removed page_pool_destroy() (from driver invocation) and moved shutdown and free of page_pool into xdp_rxq_info_unreg(), in-order to handle in-flight packets/pages. This created an asymmetry in drivers create/destroy pairs. This patch reintroduce page_pool_destroy and add page_pool user refcnt. This serves the purpose to simplify drivers error handling as driver now drivers always calls page_pool_destroy() and don't need to track if xdp_rxq_info_reg_mem_model() was unsuccessful. This could be used for a special cases where a single RX-queue (with a single page_pool) provides packets for two net_device'es, and thus needs to register the same page_pool twice with two xdp_rxq_info structures. This patch is primarily to ease API usage for drivers. The recently merged netsec driver, actually have a bug in this area, which is solved by this API change. This patch is a modified version of Ivan Khoronzhuk's original patch. Link: https://lore.kernel.org/netdev/20190625175948.24771-2-ivan.khoronzhuk@linaro.org/ Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: netsec: Sync dma for device on buffer allocationIlias Apalodimas1-3/+1
cd1973a9215a ("net: netsec: Sync dma for device on buffer allocation") was merged on it's v1 instead of the v3. Merge the proper patch version Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06net: netsec: Sync dma for device on buffer allocationIlias Apalodimas1-0/+5
Quoting Arnd, We have to do a sync_single_for_device /somewhere/ before the buffer is given to the device. On a non-cache-coherent machine with a write-back cache, there may be dirty cache lines that get written back after the device DMA's data into it (e.g. from a previous memset from before the buffer got freed), so you absolutely need to flush any dirty cache lines on it first. Since the coherency is configurable in this device make sure we cover all configurations by explicitly syncing the allocated buffer for the device before refilling it's descriptors Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-06net: socionext: remove set but not used variable 'pkts'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_clean_tx_dring': drivers/net/ethernet/socionext/netsec.c:637:15: warning: variable 'pkts' set but not used [-Wunused-but-set-variable] It is not used since commit ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02net: netsec: add XDP supportIlias Apalodimas1-27/+334
The interface only supports 1 Tx queue so locking is introduced on the Tx queue if XDP is enabled to make sure .ndo_start_xmit and .ndo_xdp_xmit won't corrupt Tx ring - Performance (SMMU off) Benchmark XDP_SKB XDP_DRV xdp1 291kpps 344kpps rxdrop 282kpps 342kpps - Performance (SMMU on) Benchmark XDP_SKB XDP_DRV xdp1 167kpps 324kpps rxdrop 164kpps 323kpps Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02net: netsec: Use page_pool APIIlias Apalodimas1-47/+79
Use page_pool and it's DMA mapping capabilities for Rx buffers instead of netdev/napi_alloc_frag() Although this will result in a slight performance penalty on small sized packets (~10%) the use of the API will allow to easily add XDP support. The penalty won't be visible in network testing i.e ipef/netperf etc, it only happens during raw packet drops. Furthermore we intend to add recycling capabilities on the API in the future. Once the recycling is added the performance penalty will go away. The only 'real' penalty is the slightly increased memory usage, since we now allocate a page per packet instead of the amount of bytes we need + skb metadata (difference is roughly 2kb per packet). With a minimum of 4BG of RAM on the only SoC that has this NIC the extra memory usage is negligible (a bit more on 64K pages) Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: netsec: remove loops in napi Rx processIlias Apalodimas1-9/+2
netsec_process_rx was running in a loop trying to process as many packets as possible before re-enabling interrupts. With the recent DMA changes this is not needed anymore as we manage to consume all the budget without looping over the function. Since it has no performance penalty let's remove that and simplify the Rx path a bit Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: netsec: initialize tx ring on ndo_openIlias Apalodimas1-14/+18
Since we changed the Tx ring handling and now depends on bit31 to figure out the owner of the descriptor, we should initialize this every time the device goes down-up instead of doing it once on driver init. If the value is not correctly initialized the device won't have any available descriptors Changes since v1: - Typo fixes Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: socionext: replace napi_alloc_frag with the netdev variant on initIlias Apalodimas1-4/+7
The netdev variant is usable on any context since it disables interrupts. The napi variant of the call should only be used within softirq context. Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag call Changes since v1: - Adjusted commit message Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Fixes: 4acb20b46214 ("net: socionext: different approach on DMA") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-16net: socionext: remove mmio reads on TxIlias Apalodimas1-43/+54
Currently the driver issues 2 mmio reads to figure out the number of transmitted packets and clean them. We can get rid of the expensive reads since BIT 31 of the Tx descriptor can be used for that. We can also remove the budget counting of Tx completions since all of the descriptors are not deliberately processed. Performance numbers using pktgen are: size pre-patch(pps) post-patch(pps) 64 362483 427916 128 358315 411686 256 352725 389683 512 215675 216464 1024 113812 114442 Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: socionext: correctly recover txq after being fullIlias Apalodimas1-11/+45
Running pktgen with packets sizes > 512b ends up in the interface Txq getting stuck. "netsec 522d0000.ethernet eth0: netsec_netdev_start_xmit: TxQFull!" appears on dmesg but the interface never recovers. It requires an ifconfig down/up to make the interface usable again. The reason that triggers this, is a race condition between .ndo_start_xmit and the napi completion. The available budget is calculated first and indicates the queue is full. Due to a costly netif_err() the queue is not stopped in time while the napi completion runs, clears the irq and frees up descriptors, thus the queue never wakes up again. Fix this by moving the print after stopping the queue, make the print ratelimited, add barriers and check for cleaned descriptors.. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: socionext: refactor netsec_alloc_dring()Ilias Apalodimas1-8/+3
return -ENOMEM directly instead of assigning it in a variable Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: socionext: different approach on DMAIlias Apalodimas1-99/+128
Current driver dynamically allocates an skb and maps it as DMA Rx buffer. In order to prepare for upcoming XDP changes, let's introduce a different allocation scheme. Buffers are allocated dynamically and mapped into hardware. During the Rx operation the driver uses build_skb() to produce the necessary buffers for the network stack. This change increases performance ~15% on 64b packets with smmu disabled and ~5% with smmu enabled Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Reset tx queue in ndo_stopMasahisa Kojima1-0/+3
We observed that packets and bytes count are not reset when user performs interface down. Eventually, tx queue is exhausted and packets will not be sent out. To avoid this problem, resets tx queue in ndo_stop. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Add dummy PHY register read in phy_write()Masahisa Kojima1-2/+16
There is a compatibility issue between RTL8211E implemented in Developerbox and netsec ethernet controller IP. Our MDIO controller stops MDC clock right after the write access, but RTL8211E expects MDC clock must be kept toggling for several clock cycle with MDIO high before entering the IDLE state. Without keeping clock after write access, write access is not correctly handled and register is not updated. To meet this requirement, netsec driver needs to issue dummy read(e.g. read PHYID1(offset 0x2) register) right after write access, to keep MDC clock. We think this compatibility issue is a problem specific to our MDIO controller and RTL8211E. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Stop PHY before resetting netsecMasahisa Kojima1-4/+15
In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: socionext: clear rx irq correctlyIlias Apalodimas1-1/+4
commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-28 07:33:37 +0300