summaryrefslogtreecommitdiff
path: root/drivers/net/phy/marvell10g.c
AgeCommit message (Collapse)AuthorFilesLines
2021-02-12net: phy: introduce phydev->portMichael Walle1-0/+2
At the moment, PORT_MII is reported in the ethtool ops. This is odd because it is an interface between the MAC and the PHY and no external port. Some network card drivers will overwrite the port to twisted pair or fiber, though. Even worse, the MDI/MDIX setting is only used by ethtool if the port is twisted pair. Set the port to PORT_TP by default because most PHY drivers are copper ones. If there is fibre support and it is enabled, the PHY driver will set it to PORT_FIBRE. This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE; except for the genphy fallback driver. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-12net: phy: marvell10g: fix null pointer dereferenceMarek Behún1-11/+7
Commit c3e302edca24 ("net: phy: marvell10g: fix temperature sensor on 2110") added a check for PHY ID via phydev->drv->phy_id in a function which is called by devres at a time when phydev->drv is already set to null by phy_remove function. This null pointer dereference can be triggered via SFP subsystem with a SFP module containing this Marvell PHY. When the SFP interface is put down, the SFP subsystem removes the PHY. Fixes: c3e302edca24 ("net: phy: marvell10g: fix temperature sensor on 2110") Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: phy: marvell10g: support XFI rate matching modeBaruch Siach1-0/+22
When the hardware MACTYPE hardware configuration pins are set to "XFI with Rate Matching" the PHY interface operate at fixed 10Gbps speed. The MAC buffer packets in both directions to match various wire speeds. Read the MAC Type field in the Port Control register, and set the MAC interface speed accordingly. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+26
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net: phy: marvell10g: fix temperature sensor on 2110Baruch Siach1-1/+26
Read the temperature sensor register from the correct location for the 88E2110 PHY. There is no enable/disable bit on 2110, so make mv3310_hwmon_config() run on 88X3310 only. Fixes: 62d01535474b61 ("net: phy: marvell10g: add support for the 88x2110 PHY") Cc: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+2
Simple overlapping changes to linux/vermagic.h Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-25net: phy: remove genphy_no_soft_resetHeiner Kallweit1-2/+0
Since 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") we don't need genphy_no_soft_reset() any longer. Not setting callback soft_reset results in a no-op now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-23net: phy: marvell10g: limit soft reset to 88x3310Baruch Siach1-1/+2
The MV_V2_PORT_CTRL_SWRST bit in MV_V2_PORT_CTRL is reserved on 88E2110. Setting SWRST on 88E2110 breaks packets transfer after interface down/up cycle. Fixes: 8f48c2ac85ed ("net: marvell10g: soft-reset the PHY when coming out of low power") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: marvell10g: soft-reset the PHY when coming out of low powerRussell King1-3/+13
Soft-reset the PHY when coming out of low power mode, which seems to be necessary with firmware versions 0.3.3.0 and 0.3.10.0. This depends on ("net: marvell10g: report firmware version") Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-15net: marvell10g: report firmware versionRussell King1-0/+20
Report the firmware version when probing the PHY to allow issues attributable to firmware to be diagnosed. Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24net: phy: marvell10g: use phy_read_mmd_poll_timeout() to simplify the codeDejin Zheng1-10/+5
use phy_read_mmd_poll_timeout() to replace the poll codes for simplify mv3310_reset() function. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05net: phy: marvell10g: place in powersave mode at probeRussell King1-4/+26
Place the 88x3310 into powersaving mode when probing, which saves 600mW per PHY. For both PHYs on the Macchiatobin double-shot, this saves about 10% of the board idle power. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05net: phy: marvell10g: add energy detect power down tunableRussell King1-1/+85
Add support for the energy detect power down tunable, which saves around 600mW when the link is down. The 88x3310 supports off, rx-only and NLP every second. Enable EDPD by default for 88x3310. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05net: phy: marvell10g: add mdix controlRussell King1-2/+59
Add support for controlling the MDI-X state of the PHY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: phy: marvell10g: read copper results from CSSR1Russell King1-52/+89
Read the copper autonegotiation results from the copper specific status register, rather than decoding the advertisements. Reading what the link is actually doing will allow us to support downshift modes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKRRussell King1-5/+6
Switch network drivers, phy drivers, and SFP/phylink over to use the more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane ethernet, which is 10GBASE-R with autonegotiation on top, which our current usage on the affected platforms does not have. The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia PHY, which has a separate mode for 10GBASE-KR. For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R for compatibility with existing DT - this is the only network driver at present that makes use of PHY_INTERFACE_MODE_10GKR. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-11net: sfp: derive interface mode from ethtool link modesRussell King1-1/+1
We don't need the EEPROM ID to derive the phy interface mode as we can derive it merely from the ethtool link modes. Remove the EEPROM ID argument to sfp_select_interface(). Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: phy: marvell10g: add SFP+ supportRussell King1-1/+24
Add support for SFP+ cages to the Marvell 10G PHY driver. This is slightly complicated by the way phylib works in that we need to use a multi-step process to attach the SFP bus, and we also need to track the phylink state machine to know when the module's transmit disable signal should change state. With appropriate DT changes, this allows the SFP+ canges on the Macchiatobin platform to be functional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30net: phy: marvell10g: report if the PHY fails to boot firmwareRussell King1-0/+13
Some boards do not have the PHY firmware programmed in the 3310's flash, which leads to the PHY not working as expected. Warn the user when the PHY fails to boot the firmware and refuse to initialise. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-09net: phy: remove unnecessary callback settings in C45 driversHeiner Kallweit1-1/+0
genphy_c45_aneg_done() is used by phylib as fallback for c45 PHY's if callback aneg_done isn't defined. So we don't have to set this explicitly. Same for genphy_c45_pma_read_abilities(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: phy: marvell10g: add the suspend/resume callbacks for the 88x2210Antoine Tenart1-0/+2
When the 88x2110 PHY support was added, the suspend and resume callbacks were forgotten. This patch adds them to the 88x2110 PHY callback definition. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: phy: marvell10g: implement suspend/resume callbacksAntoine Tenart1-1/+11
This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS are powered down) when the PHY isn't used. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04net: phy: remove gen10g_no_soft_resetHeiner Kallweit1-2/+2
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops, one is enough. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: phy: marvell10g: Use the generic C45 helper to read the 2110 featuresMaxime Chevallier1-1/+1
Contrary to the 3310, the 2110 PHY correctly reports it's 2.5G/5G abilities. We can therefore use the genphy_c45_pma_read_abilities helper to build the list of features. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28net: phy: marvell10g: Let genphy_c45_pma_read_abilities set Aneg bitMaxime Chevallier1-10/+0
The genphy_c45_pma_read_abilities helper now sets the Autoneg ability in phydev->supported according to what the AN MMD reports. We therefore don't need to manually do that in mv3310_get_features(). Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: add support for the 88x2110 PHYMaxime Chevallier1-0/+13
This patch adds support for the 88x2110 PHY, which is similar to the already supported 88x3310 PHY without the SFP interface. It supports 10/100/1000BASET along with 2.5GBASET, 5GBASET and 10GBASET, with the same interface modes that are used by the 3310. This PHY don't have the same issue as the 88x3310 regarding 2.5/5G abilities, and correctly follows the 802.3bz standard to list the supported abilities. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: Force reading of 2.5/5GMaxime Chevallier1-0/+35
As per 802.3bz, if bit 14 of (1.11) "PMA Extended Abilities" indicates whether or not we should read register (1.21) "2.52/5G PMA Extended Abilities", which contains information on the support of 2.5GBASET and 5GBASET. After testing on several variants of PHYS of this family, it appears that bit 14 in (1.11) isn't always set when it should be. PHYs 88X3310 (on MacchiatoBin) and 88E2010 do support 2.5G and 5GBASET, but don't have 1.11.14 set. Their register 1.21 is filled with the correct values, indicating 2.5G and 5G support. PHYs 88E2110 do have their 1.11.14 bit set, as it should. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: Use a #define for 88X3310 family idMaxime Chevallier1-2/+2
The PHY ID corresponding to the 88X3310 is also used for other PHYs in the same family, such as the 88E2010. Use a #define for the PHY id, that ignores the last nibble. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: Use 2500BASEX when using 2.5GBASETMaxime Chevallier1-7/+19
The Marvell Alaska family of PHYs supports 2.5GBaseT and 5GBaseT modes, as defined in the 802.3bz specification. Upon establishing a 2.5GBASET link, the PHY will reconfigure it's MII interface to 2500BASEX. At 5G, the PHY will reconfigure it's interface to 5GBASE-R, but this mode isn't supported by any MAC for now. This was tested with : - The 88X3310, which is on the MacchiatoBin - The 88E2010, an Alaska PHY that has no fiber interfaces, and is limited to 5G maximum speed. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: Use linkmode_set_bit helper instead of __set_bitMaxime Chevallier1-2/+2
Cosmetic patch making use of helpers dedicated to linkmodes handling. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25net: phy: marvell10g: Use get_features to get the PHY abilitiesMaxime Chevallier1-3/+8
The Alaska family of 10G PHYs has more abilities than the ones listed in PHY_10GBIT_FULL_FEATURES, the exact list depending on the model. Make use of the newly introduced .get_features call to build this list, using genphy_c45_pma_read_abilities to build the list of supported linkmodes, and adding autoneg ability based on what's reported by the AN MMD. .config_init is still used to validate the interface_mode. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: marvell10g: use genphy_c45_check_and_restart_aneg in ↵Heiner Kallweit1-14/+1
mv3310_config_aneg Use new function genphy_c45_check_and_restart_aneg() to reduce boilerplate code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: phy: marvell10g: improve mv3310_config_anegHeiner Kallweit1-7/+2
Now that genphy_c45_pma_setup_forced() makes sure the "aneg enabled" bit is cleared, the call to genphy_c45_an_disable_aneg() isn't needed any longer. And the code pattern is now the same as in genphy_config_aneg(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-18net: phy: marvell10g: Don't explicitly set Pause and Asym_PauseMaxime Chevallier1-3/+0
The PHY core expects PHY drivers not to set Pause and Asym_Pause bits, unless the driver only wants to specify one of them due to HW limitation. In the case of the Marvell10g driver, we don't need to set them. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: check for newly set anegHeiner Kallweit1-0/+10
Even if the advertisement registers content didn't change, we may have just switched to aneg, and therefore have to trigger an aneg restart. This matches the behavior of genphy_config_aneg(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-17net: phy: marvell10g: use genphy_c45_an_config_anegAndrew Lunn1-21/+4
Use new function genphy_c45_config_aneg() in mv3310_config_aneg(). v2: - add a comment regarding 1000BaseT vendor registers v3: - rebased Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: patch splitted] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: phy: Extract genphy_c45_pma_read_abilities from marvell10gMaxime Chevallier1-70/+8
Marvell 10G PHY driver has a generic way of initializing the supported link modes by reading the PHY's C45 PMA abilities. This can be made generic, since these registers are part of the 802.3 specifications. This commit extracts the config_init link_mode initialization code from marvell10g and uses it to introduce the genphy_c45_pma_read_abilities function. Only PMA modes are read, it's still up to the caller to set the Pause parameters. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10net: phy: marvell10g: fix usage of new MMD modifying helpersHeiner Kallweit1-7/+6
When replacing mv3310_modify() with phy_modify_mmd() we missed that they behave differently, mv3310_modify() returns 1 on a changed register value whilst phy_modify_mmd() returns 0. Fix this by replacing phy_modify_mmd() with phy_modify_mmd_changed() where needed. Fixes: b52c018ddccf ("net: phy: make use of new MMD accessors") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08net: phy: let genphy_c45_read_link manage the devices to checkHeiner Kallweit1-9/+1
Let genphy_c45_read_link manage the devices to check, this removes overhead from callers. Add C22EXT to the list of excluded devices because it doesn't implement the status register. According to the 802.3 clause 45 spec registers 29.0 - 29.4 are reserved. At the moment we have very few clause 45 PHY drivers, so we are lacking experience whether other drivers will have to exclude further devices, or may need to check PHY XS. If we should figure out that list of devices to check needs to be configurable, I think best will be to add a device list member to struct phy_driver. v2: - adjusted commit message - exclude also device C22EXT from link checking Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-07net: phy: improve genphy_c45_read_linkHeiner Kallweit1-2/+0
Let's make genphy_c45_read_link behave the same as genphy_update_link and set phydev->link in the function directly. This allows to simplify the callers. In addition don't check further devices once we detect that at least one device reports link as down. v2: - remove an unused variable Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: phy: make use of new MMD accessorsHeiner Kallweit1-28/+10
Make use of the new MMD accessors. v2: - fix SoB Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn1-0/+1
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06net: mii: Rename mii_stat1000_to_linkmode_lpa_tAndrew Lunn1-1/+1
Rename mii_stat1000_to_linkmode_lpa_t to mii_stat1000_mod_linkmode_lpa_t to indicate it modifies the passed linkmode bitmap, without clearing any other bits. Add a helper to set/clear bits in a linkmode. Use this helper to ensure bit are clear which the stat1000 indicates should not be set. Fixes: c0ec3c273677 ("net: phy: Convert u32 phydev->lp_advertising to linkmode") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: phy: Convert u32 phydev->lp_advertising to linkmodeAndrew Lunn1-2/+2
Convert phy drivers to report the link partner advertised modes using a linkmode bitmap. This allows them to report the higher speeds which don't fit in a u32. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-17/+16
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: phy: Replace phy driver features u32 with link_mode bitmapAndrew Lunn1-10/+1
This is one step in allowing phylib to make use of link_mode bitmaps, instead of u32 for supported and advertised features. Convert the phy drivers to use bitmaps to indicates the features they support. Build bitmap equivalents of the u32 values at runtime, and have the drivers point to the appropriate bitmap. These bitmaps are shared, and we don't want a driver to modify them. So mark them __ro_after_init. Within phylib, the features bitmap is currently turned back into a u32. This will be removed once the whole of phylib, and the drivers are converted to use bitmaps. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02net: phy: Add phydev_warn()Andrew Lunn1-3/+3
Not all new style LINK_MODE bits can be converted into old style SUPPORTED bits. We need to warn when such a conversion is attempted. Add a helper for this. Convert all pr_warn() calls to phydev_warn() where possible. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04net: phy: marvell10g: add thermal hwmon deviceRussell King1-2/+182
Add a thermal monitoring device for the Marvell 88x3310, which updates once a second. We also need to hook into the suspend/resume mechanism to ensure that the thermal monitoring is reconfigured when we resume. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05net: phy: Fix spelling mistake: "advertisment"-> "advertisement"Colin Ian King1-1/+1
Trivial fix to spelling mistake in comments and error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02net: phy: marvell10g: Utilize gen10g_no_soft_reset()Florian Fainelli1-10/+1
We do the same thing as the generic function: nothing, so utilize it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-16 14:36:10 +0300