summaryrefslogtreecommitdiff
path: root/drivers/net/veth.c
AgeCommit message (Collapse)AuthorFilesLines
2017-12-08veth: set peer GSO valuesStephen Hemminger1-0/+3
When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer1-2/+3
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-22veth: Be more robust on network device creation when no attributesSerhey Popovych1-2/+2
There are number of problems with configuration peer network device in absence of IFLA_VETH_PEER attributes where attributes for main network device shared with peer. First it is not feasible to configure both network devices with same MAC address since this makes communication in such configuration problematic. This case can be reproduced with following sequence: # ip link add address 02:11:22:33:44:55 type veth # ip li sh ... 26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff 27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff Second it is not possible to register both main and peer network devices with same name, that happens when name for main interface is given with IFLA_IFNAME and same attribute reused for peer. This case can be reproduced with following sequence: # ip link add dev veth1a type veth RTNETLINK answers: File exists To fix both of the cases check if corresponding netlink attributes are taken from peer_tb when valid or name based on rtnl ops kind and random address is used. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-2/+2
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-1/+2
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30net: veth: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+7
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: make ndo_get_stats64 a void functionstephen hemminger1-4/+2
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in core net infraJarod Wilson1-14/+3
geneve: - Merge __geneve_change_mtu back into geneve_change_mtu, set max_mtu - This one isn't quite as straight-forward as others, could use some closer inspection and testing macvlan: - set min/max_mtu tun: - set min/max_mtu, remove tun_net_change_mtu vxlan: - Merge __vxlan_change_mtu back into vxlan_change_mtu - Set max_mtu to IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function - This one is also not as straight-forward and could use closer inspection and testing from vxlan folks bridge: - set max_mtu of IP_MAX_MTU and retain dynamic MTU range checks in change_mtu function openvswitch: - set min/max_mtu, remove internal_dev_change_mtu - note: max_mtu wasn't checked previously, it's been set to 65535, which is the largest possible size supported sch_teql: - set min/max_mtu (note: max_mtu previously unchecked, used max of 65535) macsec: - min_mtu = 0, max_mtu = 65535 macvlan: - min_mtu = 0, max_mtu = 65535 ntb_netdev: - min_mtu = 0, max_mtu = 65535 veth: - min_mtu = 68, max_mtu = 65535 8021q: - min_mtu = 0, max_mtu = 65535 CC: netdev@vger.kernel.org CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Tom Herbert <tom@herbertland.com> CC: Daniel Borkmann <daniel@iogearbox.net> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Paolo Abeni <pabeni@redhat.com> CC: Jiri Benc <jbenc@redhat.com> CC: WANG Cong <xiyou.wangcong@gmail.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Pravin B Shelar <pshelar@ovn.org> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Patrick McHardy <kaber@trash.net> CC: Stephen Hemminger <stephen@networkplumber.org> CC: Pravin Shelar <pshelar@nicira.com> CC: Maxim Krasnyansky <maxk@qti.qualcomm.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31net: veth: Set features for MPLSDavid Ahern1-0/+1
veth does not really transmit packets only moves the skb from one netdev to another so gso and checksum is not really needed. Add the features to mpls_features to get the same benefit and performance with MPLS as without it. Reported-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26veth: sctp: add NETIF_F_SCTP_CRC to device featuresXin Long1-1/+1
Commit b17c706987fa ("loopback: sctp: add NETIF_F_SCTP_CSUM to device features") added NETIF_F_SCTP_CRC to device features for lo device to improve the performance of sctp over lo. This patch is to add NETIF_F_SCTP_CRC to device features for veth to improve the performance of sctp over veth. Before this patch: ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 212992 212992 10240 10.00 1117.16 After this patch: ip netns exec cs_client netperf -H 10.167.12.2 -t SCTP_STREAM -- -m 10K Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 212992 212992 10240 10.20 1415.22 Tested-by: Li Shuang <tjlishuang@yeah.net> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21veth: Update features to include all tunnel GSO typesAlexander Duyck1-4/+3
This patch adds support for the checksum enabled versions of UDP and GRE tunnels. With this change we should be able to send and receive GSO frames of these types over the veth pair without needing to segment the packets. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01veth: implement ndo_set_rx_headroomPaolo Abeni1-0/+26
The rx headroom for veth dev is the peer device needed_headroom. Avoid ping-pong updates setting the private flag IFF_PHONY_HEADROOM. This avoids skb head reallocation when forwarding from a veth dev towards a device adding some kind of encapsulation. When transmitting frames below the MTU size towards a vxlan device, this gives about 10% performance speed-up when OVS is used to connect the veth and the vxlan device and a little more when using a plain Linux bridge. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-22veth: don’t modify ip_summed; doing so treats packets with bad checksums ↵Vijay Pandurangan1-6/+0
as good. Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc1c0dc6a548ecf> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b7967503dc97864f283a> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by: Evan Jones <ej@evanjones.ca> Signed-off-by: Evan Jones <ej@evanjones.ca> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vijay Pandurangan <vijayp@vijayp.ca> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: veth: enable noqueue operation by defaultPhil Sutter1-0/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04veth: Don't segment multiple tagged packets on veth deviceToshiaki Makita1-0/+1
Veth devices don't need to segment multiple tagged packets. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02veth: set iflink to the peer vethNicolas Dichtel1-0/+15
Now that the peer netns is advertised in rtnl messages, we can set this property so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get the full veth configuration. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24veth: advertise link netns via netlinkNicolas Dichtel1-0/+9
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-16net: rtnetlink - make create_link take name_assign_typeTom Gundersen1-3/+8
This passes down NET_NAME_USER (or NET_NAME_ENUM) to alloc_netdev(), for any device created over rtnetlink. v9: restore reverse-christmas-tree order of local variables Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26veth: add netpoll supportWANG Cong1-0/+18
It is trivial to add netpoll support to veth, since it is not a stacked device, we don't need to setup and clean up netpoll. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Cc: "David S. Miller" <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29veth: Turn off vlan rx acceleration in vlan_featuresVlad Yasevich1-1/+4
For completeness, turn off vlan rx acceleration in vlan_features so that it doesn't show up on q-in-q setups. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman1-2/+2
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-20veth: Fix vlan_features so as to be able to use stacked vlan interfacesToshiaki Makita1-1/+2
Even if we create a stacked vlan interface such as veth0.10.20, it sends single tagged frames (tagged with only vid 10). Because vlan_features of a veth interface has the NETIF_F_HW_VLAN_[CTAG/STAG]_TX bits, veth0.10 also has that feature, so dev_hard_start_xmit(veth0.10) doesn't call __vlan_put_tag() and vlan_dev_hard_start_xmit(veth0.10) overwrites vlan_tci. This prevents us from using a combination of 802.1ad and 802.1Q in containers, etc. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19rtnl: make ifla_policy staticJiri Pirko1-4/+4
The only place this is used outside rtnetlink.c is veth. So provide wrapper function for this usage. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-15net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong1-10/+1
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
2013-11-06net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz1-0/+8
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-28veth: extend features to support tunnelingEric Dumazet1-0/+3
While investigating on a recent vxlan regression, I found veth was using a zero features set for vxlan tunnels. We have to segment GSO frames, copy the payload, and do the checksum. This patch brings a ~200% performance increase We probably have to add hw_enc_features support on other virtual devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10veth: allow to setup multicast address for veth deviceGao feng1-0/+6
We can only setup multicast address for network device when net_device_ops->ndo_set_rx_mode is not null. Some configurations need to add multicast address for net device, such as netfilter cluster match module. Add a fake ndo_set_rx_mode function to allow this operation. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-09Revert "veth: Showing peer of veth type dev in ip link (kernel side)"David S. Miller1-21/+0
This reverts commit 612c337306f00dc8d396830212de51c475844791. As per Stephen Hemminger, the layout of the netlink attribute is not implemented correctly so revert this for now. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-08veth: Showing peer of veth type dev in ip link (kernel side)Masatake YAMATO1-0/+21
ip link has ability to show extra information of net work device if kernel provides sunh information. With this patch veth driver can provide its peer ifindex information to ip command via netlink interface. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-20veth: add vlan featuresFlavio Leitner1-0/+1
The veth device doesn't provide the vlan features, so TSO for example is disabled and that causes performance issues when using tagged traffic. The test topology looks like this: br0 br1 / \ / \ vnet veth0.10 ----- veth1.10 vnet VM VM The netperf results with current veth driver: MIGRATED TCP STREAM TEST from 192.168.1.1 () port 0 AF_INET to 192.168.1.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.01 2210.22 Now after applying the proposed patch: MIGRATED TCP STREAM TEST from 192.168.1.1 () port 0 AF_INET to 192.168.1.2 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 13067.47 Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12veth: remove redundant call of dev_alloc_nameHong zhi guo1-7/+0
it's called in the following register_netdevice. No need to call it here. Tested with "ip link add type veth" and "ip link add xxx%d type veth". Signed-off-by: Hong Zhiguo <honkiko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: announce STAG offload capability in some driversPatrick McHardy1-1/+2
- macvlan: propagate STAG filtering capabilities from underlying device - ifb: announce STAG tagging support in addition to CTAG tagging support - veth: announce STAG tagging/stripping support in addition to CTAG support Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-1/+1
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11veth: fix NULL dereference in veth_dellink()Eric Dumazet1-5/+6
commit d0e2c55e7c940 (veth: avoid a NULL deref in veth_stats_one) added another NULL deref in veth_dellink(). # ip link add name veth1 type veth peer name veth0 # rmmod veth We crash because veth_dellink() is called twice, so we must take care of NULL peer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11veth: fix a NULL deref in netif_carrier_offEric Dumazet1-1/+3
In commit d0e2c55e7c94 (veth: avoid a NULL deref in veth_stats_one) we now clear the peer pointers in veth_dellink() veth_close() must therefore make sure the peer pointer is set. Reported-by: Tom Parkin <tom.parkin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08veth: avoid a NULL deref in veth_stats_oneEric Dumazet1-18/+40
commit 2681128f0ced8a (veth: extend device features) added a NULL deref in veth_stats_one(), as veth_get_stats64() was not testing if the peer device was setup or not. At init time, we call dev_get_stats() before veth pair is fully setup. [ 178.854758] [<ffffffffa00f5677>] veth_get_stats64+0x47/0x70 [veth] [ 178.861013] [<ffffffff814f0a2d>] dev_get_stats+0x6d/0x130 [ 178.866486] [<ffffffff81504efc>] rtnl_fill_ifinfo+0x47c/0x930 [ 178.872299] [<ffffffff81505b93>] rtmsg_ifinfo+0x83/0x100 [ 178.877678] [<ffffffff81505cc6>] rtnl_configure_link+0x76/0xa0 [ 178.883580] [<ffffffffa00f52fa>] veth_newlink+0x16a/0x350 [veth] [ 178.889654] [<ffffffff815061cc>] rtnl_newlink+0x4dc/0x5e0 [ 178.895128] [<ffffffff81505e1e>] ? rtnl_newlink+0x12e/0x5e0 [ 178.900769] [<ffffffff8150587d>] rtnetlink_rcv_msg+0x11d/0x310 [ 178.906669] [<ffffffff81505760>] ? __rtnl_unlock+0x20/0x20 [ 178.912225] [<ffffffff81521f89>] netlink_rcv_skb+0xa9/0xd0 [ 178.917779] [<ffffffff81502d55>] rtnetlink_rcv+0x25/0x40 [ 178.923159] [<ffffffff815218d1>] netlink_unicast+0x1b1/0x230 [ 178.928887] [<ffffffff81521c4e>] netlink_sendmsg+0x2fe/0x3b0 [ 178.934615] [<ffffffff814dbe22>] sock_sendmsg+0xd2/0xf0 So we must check if peer was setup in veth_get_stats64() As pointed out by Ben Hutchings, priv->peer is missing proper synchronization. Adding RCU protection is a safe and well documented way to make sure we don't access about to be freed or already freed data. Reported-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: Eric Dumazet <edumazet@google.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30veth: extend device featuresEric Dumazet1-1/+6
veth is lacking most modern facilities, like SG, checksums, TSO. It makes sense to extend dev->features to get them, or GRO aggregation is defeated by a forced segmentation. Reported-by: Andrew Vagin <avagin@parallels.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30veth: reduce stat overheadEric Dumazet1-68/+47
veth stats are a bit bloated. There is no need to account transmit and receive stats, since they are absolutely symmetric. Also use a per device atomic64_t for the dropped counter, as it should never be used in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-30rtnelink: remove unused parameter from rtnl_create_link().Rami Rosen1-1/+1
This patch removes an unused parameter (src_net) from rtnl_create_link() method and from the method single invocation, in veth. This parameter was used in the past when calling ops->get_tx_queues(src_net, tb) in rtnl_create_link(). The get_tx_queues() member of rtnl_link_ops was replaced by two methods, get_num_tx_queues() and get_num_rx_queues(), which do not get any parameter. This was done in commit d40156aa5ecbd51fed932ed4813df82b56e5ff4d by Jiri Pirko ("rtnl: allow to specify different num for rx and tx queue count"). Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01veth: allow changing the mac address while interface is upHannes Frederic Sowa1-0/+1
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10veth: Allow to create peer link with given ifindexPavel Emelyanov1-0/+3
The ifinfomsg is in there (thanks kaber@ for foreseeing this long time ago), so take the given ifidex and register netdev with it. Ben noticed, that this code path previously ignored ifmp->ifi_index and userland could be passing in garbage. Thus it may now fail occasionally because the value clashes with an existing interface. To address this it's assumed that if the caller specifies the ifindex for the veth master device, then it's aware of this possibility and should explicitly specify (or set to 0 for auto-assignment) the peer's ifindex as well. With this the compatibility with old tools not setting ifindex is preserved. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c Small minor conflict in bnx2x, wherein one commit changed how statistics were stored in software, and another commit fixed endianness bugs wrt. reading the values provided by the chip in memory. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-16net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka1-2/+2
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15veth: Enforce minimum size of VETH_INFO_PEERThomas Graf1-1/+3
VETH_INFO_PEER carries struct ifinfomsg plus optional IFLA attributes. A minimal size of sizeof(struct ifinfomsg) must be enforced or we may risk accessing that struct beyond the limits of the netlink message. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a ↵Rick Jones1-1/+0
number of drivers Per discussion with Ben Hutchings and David Miller, go through and remove assignments of "N/A" to fw_version in various drivers' .get_drvinfo routines. While there clean-up some use of bare constants and such. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>