summaryrefslogtreecommitdiff
path: root/drivers/of/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+0
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-06mtd: nand: move of_get_nand_xxx() helpers into nand_base.cBoris Brezillon1-1/+0
Now that all drivers go through nand_set_flash_node() to parse the generic NAND properties, we can move all of_get_nand_xxx() helpers in to nand_base.c, make them static and remove of_mtd.c and of_mtd.h. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-15of, numa: Add NUMA of binding implementation.David Daney1-0/+1
Add device tree parsing for NUMA topology using device "numa-node-id" property in distance-map and cpu nodes. This is a complete rewrite of a previous patch by: Ganapatrao Kulkarni<gkulkarni@caviumnetworks.com> Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-06-05of: clean-up unnecessary libfdt include pathsRob Herring1-3/+0
With the libfdt include fixups to use "" instead of <> in the latest dtc import in commit 4760597 (scripts/dtc: Update to upstream version 9d3649bd3be245c9), it is no longer necessary to add explicit include paths to use libfdt. Remove these across the kernel. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: linux-mips@linux-mips.org Cc: linuxppc-dev@lists.ozlabs.org
2015-03-25dt: OF_UNITTEST make dependency brokenFrank Rowand1-2/+3
If CONFIG_OF_UNITTEST=y then a kernel image make will always cause .version to be incremented, even if there are not source changes. This is caused by a lack of dependency tracking and checking for drivers/of/unittest-data/testcases.dtb.o. Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2014-11-25of/overlay: Introduce DT overlay supportPantelis Antoniou1-0/+1
Overlays are a method to dynamically modify part of the kernel's device tree with dynamically loaded data. Add the core functionality to parse, apply and remove an overlay changeset. The core functionality takes care of managing the overlay data format and performing the add and remove. Drivers are expected to use the overlay functionality to support custom expansion busses commonly found on consumer development boards like the BeagleBone or Raspberry Pi. The overlay code uses CONFIG_OF_DYNAMIC changesets to perform the low level work of modifying the devicetree. Documentation about internal and APIs is provided in Documentation/devicetree/overlay-notes.txt v2: - Switch from __of_node_alloc() to __of_node_dup() - Documentation fixups - Remove 2-pass processing of properties - Remove separate ov_lock; just use the DT mutex. v1: - Drop delete capability using '-' prefix. The '-' prefixed names are valid properties and nodes and there is no need for it just yet. - Do not update special properties - name & phandle ones. - Change order of node attachment, so that the special property update works. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-04of/unittest: Rename selftest.c to unittest.cGrant Likely1-2/+2
This is unit testing code. It should use that name because it makes more sense than 'selftest'. Rename the files to match and rename the config variable. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-10-05of: Introduce Device Tree resolve support.Pantelis Antoniou1-0/+1
Introduce support for dynamic device tree resolution. Using it, it is possible to prepare a device tree that's been loaded on runtime to be modified and inserted at the kernel live tree. Export of of_resolve and bug fix of double free by Guenter Roeck <groeck@juniper.net> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Don't need to select CONFIG_OF_DYNAMIC and CONFIG_OF_DEVICE] [grant.likely: Don't need to depend on OF or !SPARC] [grant.likely: Factor out duplicate code blocks into single function] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-08-11Merge branch 'devicetree/next-overlay' into devicetree/nextGrant Likely1-0/+1
Conflicts: drivers/of/testcase-data/testcases.dts
2014-07-25Adding selftest testdata dynamically into live treeGaurav Minocha1-1/+2
This patch attaches selftest's device tree data (required by /drivers/of/selftest.c) dynamically into live device tree. First, it links selftest device tree data into the kernel image and then iterates over all the nodes and attaches them into the live tree. Once the testcases are complete, it removes the data attached. This patch will remove the manual process of addition and removal of selftest device tree data into the machine's dts file. Tested successfully with current selftest's testcases. Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> [glikely: Removed ability to build as a module and fixed no-devicetree bug] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-07-07of: Move CONFIG_OF_DYNAMIC code into a separate fileGrant Likely1-0/+1
Split the dynamic device tree code into a separate file to make it really clear what features CONFIF_OF_DYNAMIC add to the kernel. Without CONFIG_OF_DYNAMIC only properties can be changed, and notifiers do not get sent. Enabling it turns on reference counting, notifiers and the ability to add and remove nodes. v2: Moved of_node_release() into dynamic.c Signed-off-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Rob Herring <robh+dt@kernel.org>
2014-05-21of/fdt: add FDT address translation supportRob Herring1-0/+2
Copy u-boot's FDT address translation code from common/fdt_support. This code was originally based on the kernel's unflattened DT address parsing code. This commit can be reverted once relicensing of this code to GPLv2/BSD is done and it is added to libfdt. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Grant Likely <grant.likely@linaro.org>
2014-04-30of/fdt: Convert FDT functions to use libfdtRob Herring1-0/+2
The kernel FDT functions predate libfdt and are much more limited in functionality. Also, the kernel functions and libfdt functions are not compatible with each other because they have different definitions of node offsets. To avoid this incompatibility and in preparation to add more FDT parsing functions which will need libfdt, let's first convert the existing code to use libfdt. The FDT unflattening, top-level FDT scanning, and property retrieval functions are converted to use libfdt. The scanning code should be re-worked to be more efficient and understandable by using libfdt to find nodes directly by path or compatible strings. Signed-off-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Grant Likely <grant.likely@linaro.org> Tested-by: Stephen Chivers <schivers@csc.com>
2014-03-11drivers: of: add initialization code for dynamic reserved memoryMarek Szyprowski1-0/+1
This patch adds support for dynamically allocated reserved memory regions declared in device tree. Such regions are defined by 'size', 'alignment' and 'alloc-ranges' properties. Based on previous code provided by Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-10-15Revert "drivers: of: add initialization code for dma reserved memory"Marek Szyprowski1-1/+0
This reverts commit 9d8eab7af79cb4ce2de5de39f82c455b1f796963. There is still no consensus on the bindings for the reserved memory and various drawbacks of the proposed solution has been shown, so the best now is to revert it completely and start again from scratch later. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-09-09Merge branch 'for-v3.12' of ↵Linus Torvalds1-0/+1
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA mapping update from Marek Szyprowski: "This contains an addition of Device Tree support for reserved memory regions (Contiguous Memory Allocator is one of the drivers for it) and changes required by the KVM extensions for PowerPC architectue" * 'for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: init: add support for reserved memory defined by device tree drivers: of: add initialization code for dma reserved memory drivers: of: add function to scan fdt nodes given by path drivers: dma-contiguous: clean source code and prepare for device tree
2013-08-27drivers: of: add initialization code for dma reserved memoryMarek Szyprowski1-0/+1
This patch adds device tree support for contiguous and reserved memory regions defined in device tree. Large memory blocks can be reliably reserved only during early boot. This must happen before the whole memory management subsystem is initialized, because we need to ensure that the given contiguous blocks are not yet allocated by kernel. Also it must happen before kernel mappings for the whole low memory are created, to ensure that there will be no mappings (for reserved blocks) or mapping with special properties can be created (for CMA blocks). This all happens before device tree structures are unflattened, so we need to get reserved memory layout directly from fdt. Later, those reserved memory regions are assigned to devices on each device structure initialization. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2013-08-23i2c: move OF helpers into the coreWolfram Sang1-1/+0
I2C of helpers used to live in of_i2c.c but experience (from SPI) shows that it is much cleaner to have this in the core. This also removes a circular dependency between the helpers and the core, and so we can finally register child nodes in the core instead of doing this manually in each driver. So, fix the drivers and documentation, too. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-06-12of: remove CONFIG_OF_DEVICERob Herring1-2/+1
CONFIG_OF_DEVICE is always selected when CONFIG_OF is enabled, so remove it and simplify of_platform.h and of_device.h headers. This also fixes !OF compiles using of_platform_populate. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2012-05-25Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+0
Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c
2012-04-13spi/devicetree: Move devicetree support code into spi directoryGrant Likely1-1/+0
The SPI device tree support code isn't shared by any other subsystem. It can be moved into the core drivers/spi directory and the exported symbol can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com>
2012-04-08gpio: Move DT support code into drivers/gpioGrant Likely1-1/+0
The code in drivers/of/gpio.c isn't shared by any other subsystem since it is all gpiolib specific. drivers/gpio is a better place to maintain these functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Linus Walleij <linus.walleij@stericsson.com>
2012-03-15of/mtd/nand: add generic bindings and helpersJean-Christophe PLAGNIOL-VILLARD1-0/+1
- nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stefan Roese <sr@denx.de>
2011-12-13of: Add device tree selftestsGrant Likely1-0/+1
Add some runtime test cases for the library of device tree parsing functions. v2: - Add testcase for phandle with 0 args - Don't run testcases if testcase data isn't present in device tree Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-08pci/of: Match PCI devices to OF nodes dynamicallyBenjamin Herrenschmidt1-0/+1
powerpc has two different ways of matching PCI devices to their corresponding OF node (if any) for historical reasons. The ppc64 one does a scan looking for matching bus/dev/fn, while the ppc32 one does a scan looking only for matching dev/fn on each level in order to be agnostic to busses being renumbered (which Linux does on some platforms). This removes both and instead moves the matching code to the PCI core itself. It's the most logical place to do it: when a pci_dev is created, we know the parent and thus can do a single level scan for the matching device_node (if any). The benefit is that all archs now get the matching for free. There's one hook the arch might want to provide to match a PHB bus to its device node. A default weak implementation is provided that looks for the parent device device node, but it's not entirely reliable on powerpc for various reasons so powerpc provides its own. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Michal Simek <monstr@monstr.eu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-04of/pci: move of_irq_map_pci() into generic codeSebastian Andrzej Siewior1-0/+1
There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-01of/net: Move of_get_mac_address() to a common source file.David Daney1-0/+1
There are two identical implementations of of_get_mac_address(), one each in arch/powerpc/kernel/prom_parse.c and arch/microblaze/kernel/prom_parse.c. Move this function to a new common file of_net.{c,h} and adjust all the callers to include the new header. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: protect header with #ifdef] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-11of/promtree: make drivers/of/pdt.c no longer sparc-onlyAndres Salomon1-0/+1
Clean up pdt.c: - make build dependent upon config OF_PROMTREE - #ifdef out the sparc-specific stuff - create pdt-specific header Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-06of/address: merge of_iomap()Grant Likely1-0/+1
Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
2010-06-28of/irq: Move irq_of_parse_and_map() to common codeGrant Likely1-0/+1
Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
2009-11-24of/flattree: merge find_flat_dt_string and initial_boot_paramsGrant Likely1-0/+1
Merge common code between Microblaze and PowerPC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Michal Simek <monstr@monstr.eu>
2009-04-27openfirmware: Add OF phylib support codeGrant Likely1-0/+1
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-26spi: Add OF binding support for SPI bussesGrant Likely1-0/+1
This patch adds support for populating an SPI bus based on data in the OF device tree. This is useful for powerpc platforms which use the device tree instead of discrete code for describing platform layout. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-20[POWERPC] i2c: Fix build breakage introduced by OF helpersJochen Friedrich1-1/+1
Fix build breakage introduced in commit "[POWERPC] i2c: OF helpers for the i2c API". If i2c-core is compiled as a module, the helper needs to be compiled as a module, as well. Rename i2c.c to of_i2c.c to avoid name space conflict. [paulus@samba.org: Changed dependency from OF to PPC_OF to avoid sparc{32,64} allmodconfig breakage.] Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] i2c: OF helpers for the i2c APIJochen Friedrich1-0/+1
This implements various helpers to support OF bindings for the i2c API. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17[POWERPC] OF helpers for the GPIO APIAnton Vorontsov1-0/+1
This implements various helpers to support OF bindings for the GPIO LIB API. Previously this was PowerPC specific, but it seems this code isn't arch-dependent anyhow, so let's place it into of/. SPARC will not see this addition yet, real hardware seem to not use GPIOs at all. But this might change: http://www.leox.org/docs/faq_MLleon.html "16-bit I/O port" sounds promising. :-) Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-20Create drivers/of/platform.cStephen Rothwell1-1/+1
and populate it with the common parts from PowerPC and Sparc[64]. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Begin to consolidate of_device.cStephen Rothwell1-0/+1
This moves all the common parts for the Sparc, Sparc64 and PowerPC of_device.c files into drivers/of/device.c. Apart from the simple move, Sparc gains of_match_node() and a call to of_node_put in of_release_dev(). PowerPC gains better recovery if device_create_file() fails in of_device_register(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Start split out of common open firmware codeStephen Rothwell1-0/+1
This creates drivers/of/base.c (depending on CONFIG_OF) and puts the first trivially common bits from the prom.c files into it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>