summaryrefslogtreecommitdiff
path: root/drivers/pci/pci-bridge-emul.h
AgeCommit message (Collapse)AuthorFilesLines
2021-08-05PCI: pci-bridge-emul: Add PCIe Root Capabilities RegisterPali Rohár1-1/+1
The 16-bit Root Capabilities register is at offset 0x1e in the PCIe Capability. Rename current 'rsvd' struct member to 'rootcap'. Link: https://lore.kernel.org/r/20210722144041.12661-4-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org>
2019-10-17PCI: pci-bridge-emul: Fix big-endian supportGrzegorz Jaszczyk1-39/+39
Perform conversion to little-endian before every write to configuration space and convert it back to CPU endianness on reads. Additionally, initialise every multiple byte field of config space with the cpu_to_le* macro, which is required since the structure describing config space of emulated bridge assumes little-endian convention. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-02-22PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flagsThomas Petazzoni1-1/+6
Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2019-02-22PCI: pci-bridge-emul: Create per-bridge copy of register behaviorThomas Petazzoni1-1/+7
The behavior of the different registers of the PCI-to-PCI bridge is currently encoded in two global arrays, shared by all instances of PCI-to-PCI bridge emulation. However, we will need to tweak the behavior on a per-bridge basis, to accommodate for different capabilities of the platforms where this code is used. In preparation for this, create a per-bridge copy of the register behavior arrays, so that they can later be tweaked on a per-bridge basis. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2018-10-18PCI: Introduce PCI bridge emulated config space common logicThomas Petazzoni1-0/+124
Some PCI host controllers do not expose a configuration space for the root port PCI bridge. Due to this, the Marvell Armada 370/38x/XP PCI controller driver (pci-mvebu) emulates a root port PCI bridge configuration space, and uses that to (among other things) dynamically create the memory windows that correspond to the PCI MEM and I/O regions. Since we now need to add a very similar logic for the Marvell Armada 37xx PCI controller driver (pci-aardvark), instead of duplicating the code, we create in this commit a common logic called pci-bridge-emul. The idea of this logic is to emulate a root port PCI bridge configuration space by providing configuration space read/write operations, and faking behind the scenes the configuration space of a PCI bridge. A PCI host controller driver simply has to call pci_bridge_emul_conf_read() and pci_bridge_emul_conf_write() to read/write the configuration space of the bridge. By default, the PCI bridge configuration space is simply emulated by a chunk of memory, but the PCI host controller can override the behavior of the read and write operations on a per-register basis to do additional actions if needed. We take care of complying with the behavior of the PCI configuration space registers in terms of bits that are read-write, read-only, reserved and write-1-to-clear. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>