summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-fsl-lib.h
AgeCommit message (Collapse)AuthorFilesLines
2016-11-14spi: fsl-espi: separate fsl-espi from fsl-lib completelyHeiner Kallweit1-7/+0
After having removed all code dependencies we can make fsl-espi completely independent of fsl-lib now. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-11spi: fsl-espi: add support for ESPI RXSKIP modeHeiner Kallweit1-0/+1
This patch adds support for ESPI RXSKIP mode. This mode is optimized for flash reads: - sends a number of bytes and then reads a number of bytes - shifts out zeros automatically when reading Supporting RXSKIP mode is a prerequisite for supporting dual output read mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsignedHeiner Kallweit1-1/+1
Now that we introduced element tx_len in struct mpc8xxx_spi let's rename element len to rx_len as it actually is the number of bytes to receive. In addition make it unsigned. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28spi: fsl-espi: fix and improve writing to TX FIFOHeiner Kallweit1-0/+2
This change addresses two issues: - If the TX FIFO is full the ISR polls until there's free space again. An ISR should never wait for something. - Currently the number of bytes to transfer is rounded up to the next multiple of 4. For most transfers therefore few bytes remain in the TX FIFO after end of transfer. This would cause the next transfer to fail and as a workaround the ESPI block is disabled / re-enabled in fsl_espi_change_mode. This seems to clear the FIFO's (although it's not mentioned in the spec). With this change the TX FIFO is filled as much as possible initially and whenever the ISR is called. Also the exact number of bytes is transferred. The spinlock protects against a potential race if the first interrupt occurs whilst the TX FIFO is still being initially filled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14spi: fsl-espi: align register access with other driversHeiner Kallweit1-1/+1
Change register access to the method used in other drivers too. - use register names as in the chip spec for constants - avoid hard to read statements like __be32 __iomem *espi_mode = &reg_base->mode - get rid of old powerpc-specific functions like in_8 In addition annotate reg_base in struct mpc8xxx_spi as __iomem. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12spi: fsl-espi: pre-allocate message bufferHeiner Kallweit1-0/+1
Currently the driver allocates a 64kb buffer for each single message. On systems with little and fragmented memory this can result in memory allocation errors. Solve this by pre-allocating a buffer. This patch was developed in OpenWRT long ago, however it never made it upstream. I slightly modified the original patch to re-initialize the buffer at the beginning of each transfer. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-(e)spi: simplify cleanup codeHeiner Kallweit1-3/+0
Now that most cleanup is done automatically the remove functions can be significantly simplified. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-06spi: fsl-(e)spi: Support compile as moduleEsben Haabendal1-2/+2
Signed-off-by: Esben Haabendal <eha@deif.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03spi: fsl-(e)spi: migrate to generic master queueingHeiner Kallweit1-9/+1
Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-04-14spi: fsl: Kill mpc8xxx_spi_cleanup and convert fsl_espi_setup to use ↵Axel Lin1-1/+0
devm_kzalloc In current code, master->cleanup and master->setup are not set in the same function. This makes it hard to read and not good for code maintain. One example is in fsl-spi.c, master->cleanup is overrided in mpc8xxx_spi_probe() which leads to a memory leak. This patch removes mpc8xxx_spi_cleanup() and converts fsl_espi_setup to use devm_kzalloc so we don't need to take care of freeing memory. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-04-07spi/spi-fsl-spi: Add support for gpio chipselects for GRLIB type coresAndreas Larsson1-0/+1
This relies upon of_spi_register_master to find out which gpios to use. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for setting a maximum number of bits per wordAndreas Larsson1-0/+1
Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Introduce a type for the driverAndreas Larsson1-0/+2
For being able to distinguishing between the regular type of cores and others with different entries in of_fsl_spi_match. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Move setting non-zero tx and rx shifts to a function ↵Andreas Larsson1-0/+5
accessed by a function pointer Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make driver usable in CPU mode outside of an FSL_SOC ↵Andreas Larsson1-2/+4
environment This makes the spi-fsl-spi driver usable in CPU mode outside of an FSL_SOC and even an powerpc environment by moving CPM mode functionality to a separate file that is only compiled and linked in an FSL_SOC environment and adding some ifdefs to hide types and functions or provide alternatives. For devicetree probing a "clock-frequency" property is used for clock frequency instead of calls to FSL_SOC-specific functions. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06spi: reorganize driversGrant Likely1-0/+123
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>