Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This change has the following effects, in order of descreasing importance:
1) Prevent a stack buffer overflow
2) Do not append an unnecessary NULL to an anyway binary buffer, which
is writing one byte past client_digest when caller is:
chap_string_to_hex(client_digest, chap_r, strlen(chap_r));
The latter was found by KASAN (see below) when input value hes expected size
(32 hex chars), and further analysis revealed a stack buffer overflow can
happen when network-received value is longer, allowing an unauthenticated
remote attacker to smash up to 17 bytes after destination buffer (16 bytes
attacker-controlled and one null). As switching to hex2bin requires
specifying destination buffer length, and does not internally append any null,
it solves both issues.
This addresses CVE-2018-14633.
Beyond this:
- Validate received value length and check hex2bin accepted the input, to log
this rejection reason instead of just failing authentication.
- Only log received CHAP_R and CHAP_C values once they passed sanity checks.
==================================================================
BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021
CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014
Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod]
Call Trace:
dump_stack+0x71/0xac
print_address_description+0x65/0x22e
? chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
kasan_report.cold.6+0x241/0x2fd
chap_string_to_hex+0x32/0x60 [iscsi_target_mod]
chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod]
? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod]
? ftrace_caller_op_ptr+0xe/0xe
? __orc_find+0x6f/0xc0
? unwind_next_frame+0x231/0x850
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? ret_from_fork+0x35/0x40
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? deref_stack_reg+0xd0/0xd0
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? is_module_text_address+0xa/0x11
? kernel_text_address+0x4c/0x110
? __save_stack_trace+0x82/0x100
? ret_from_fork+0x35/0x40
? save_stack+0x8c/0xb0
? 0xffffffffc1660000
? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod]
? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? process_one_work+0x35c/0x640
? worker_thread+0x66/0x5d0
? kthread+0x1a0/0x1c0
? ret_from_fork+0x35/0x40
? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod]
? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod]
chap_main_loop+0x172/0x570 [iscsi_target_mod]
? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod]
? rx_data+0xd6/0x120 [iscsi_target_mod]
? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod]
? cyc2ns_read_begin.part.2+0x90/0x90
? _raw_spin_lock_irqsave+0x25/0x50
? memcmp+0x45/0x70
iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod]
? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod]
? del_timer+0xe0/0xe0
? memset+0x1f/0x40
? flush_sigqueue+0x29/0xd0
iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod]
? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod]
? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod]
process_one_work+0x35c/0x640
worker_thread+0x66/0x5d0
? flush_rcu_work+0x40/0x40
kthread+0x1a0/0x1c0
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
The buggy address belongs to the page:
page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x17fffc000000000()
raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00
ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00
>ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00
^
ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2
ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00
==================================================================
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fedora got a bug report of a crash with iSCSI:
kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod]
...
Call Trace:
? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod]
? native_sched_clock+0x3e/0xa0
? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod]
kthread+0x120/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
This is a BUG_ON for using a stack buffer with a scatterlist. There
are two cases that trigger this bug. Switch to using a dynamically
allocated buffer for one case and do not assign a NULL buffer in
another case.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If iscsi_login_init_conn fails it can free conn_ops.
__iscsi_target_login_thread will then call iscsi_target_login_sess_out
which will also free it.
This fixes the problem by organizing conn allocation/setup into parts that
are needed through the life of the conn and parts that are only needed for
the login. The free functions then release what was allocated in the alloc
functions.
With this patch we have:
iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the
entire life of the conn.
iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts
of the conn that are only needed during login.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
fails
Fixes a use-after-free reported by KASAN when later
iscsi_target_login_sess_out gets called and it tries to access
conn->sess->se_sess:
Disabling lock debugging due to kernel taint
iSCSI Login timeout on Network Portal [::]:3260
iSCSI Login negotiation failed.
==================================================================
BUG: KASAN: use-after-free in
iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980
CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O
4.17.8kasan.sess.connops+ #4
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB,
BIOS 5.6.5 05/19/2014
Call Trace:
dump_stack+0x71/0xac
print_address_description+0x65/0x22e
? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
kasan_report.cold.6+0x241/0x2fd
iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod]
? __sched_text_start+0x8/0x8
? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
? __kthread_parkme+0xcc/0x100
? parse_args.cold.14+0xd3/0xd3
? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
kthread+0x1a0/0x1c0
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
Allocated by task 980:
kasan_kmalloc+0xbf/0xe0
kmem_cache_alloc_trace+0x112/0x210
iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod]
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
Freed by task 980:
__kasan_slab_free+0x125/0x170
kfree+0x90/0x1d0
iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod]
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
The buggy address belongs to the object at ffff880109d06f00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 456 bytes inside of
512-byte region [ffff880109d06f00, ffff880109d07100)
The buggy address belongs to the page:
page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000
index:0x0 compound_mapcount: 0
flags: 0x17fffc000008100(slab|head)
raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
[rebased against idr/ida changes and to handle ret review comments from Matthew]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
DDP programming happens in data path and it can fail because of lack of
resources so use pr_debug() instead of pr_info() for this case.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull IDA updates from Matthew Wilcox:
"A better IDA API:
id = ida_alloc(ida, GFP_xxx);
ida_free(ida, id);
rather than the cumbersome ida_simple_get(), ida_simple_remove().
The new IDA API is similar to ida_simple_get() but better named. The
internal restructuring of the IDA code removes the bitmap
preallocation nonsense.
I hope the net -200 lines of code is convincing"
* 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits)
ida: Change ida_get_new_above to return the id
ida: Remove old API
test_ida: check_ida_destroy and check_ida_alloc
test_ida: Convert check_ida_conv to new API
test_ida: Move ida_check_max
test_ida: Move ida_check_leaf
idr-test: Convert ida_check_nomem to new API
ida: Start new test_ida module
target/iscsi: Allocate session IDs from an IDA
iscsi target: fix session creation failure handling
drm/vmwgfx: Convert to new IDA API
dmaengine: Convert to new IDA API
ppc: Convert vas ID allocation to new IDA API
media: Convert entity ID allocation to new IDA API
ppc: Convert mmu context allocation to new IDA API
Convert net_namespace to new IDA API
cb710: Convert to new IDA API
rsxx: Convert to new IDA API
osd: Convert to new IDA API
sd: Convert to new IDA API
...
|
|
Since the session is never looked up by ID, we can use the more
space-efficient IDA instead of the IDR.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in
iscsi_login_set_conn_values. If the function fails later like when we
alloc the idr it does kfree(sess) and leaves the conn->sess pointer set.
iscsi_login_zero_tsih_s1 then returns -Exyz and we then call
iscsi_target_login_sess_out and access the freed memory.
This patch has iscsi_login_zero_tsih_s1 either completely setup the
session or completely tear it down, so later in
iscsi_target_login_sess_out we can just check for it being set to the
connection.
Cc: stable@vger.kernel.org
Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...")
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
hisi_sas, smartpqi, megaraid_sas, arcmsr.
In addition, with the continuing absence of Nic we have target updates
for tcmu and target core (all with reviews and acks).
The biggest observable change is going to be that we're (again) trying
to switch to mulitqueue as the default (a user can still override the
setting on the kernel command line).
Other major core stuff is the removal of the remaining Microchannel
drivers, an update of the internal timers and some reworks of
completion and result handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
scsi: ufs: remove unnecessary query(DM) UPIU trace
scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
scsi: aacraid: Spelling fix in comment
scsi: mpt3sas: Fix calltrace observed while running IO & reset
scsi: aic94xx: fix an error code in aic94xx_init()
scsi: st: remove redundant pointer STbuffer
scsi: qla2xxx: Update driver version to 10.00.00.08-k
scsi: qla2xxx: Migrate NVME N2N handling into state machine
scsi: qla2xxx: Save frame payload size from ICB
scsi: qla2xxx: Fix stalled relogin
scsi: qla2xxx: Fix race between switch cmd completion and timeout
scsi: qla2xxx: Fix Management Server NPort handle reservation logic
scsi: qla2xxx: Flush mailbox commands on chip reset
scsi: qla2xxx: Fix unintended Logout
scsi: qla2xxx: Fix session state stuck in Get Port DB
scsi: qla2xxx: Fix redundant fc_rport registration
scsi: qla2xxx: Silent erroneous message
scsi: qla2xxx: Prevent sysfs access when chip is down
scsi: qla2xxx: Add longer window for chip reset
...
|
|
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
|
|
The target loopback driver is a low-level driver for the SCSI subsystem,
and as such needs to depend on it.
Fixes: 8a39a047 ("target: don't depend on SCSI")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The core target code only needs code from scsi_common.c, which is now
separately selectable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This converts drivers that were only calling transport_deregister_session
to use target_remove_session. The calling of
transport_deregister_session_configfs via target_remove_session for these
types of drivers is ok, because they were not exporting info from fields
like sess_acl_list, sess->se_tpg and sess->fabric_sess_ptr from configfs
accessible functions, so they will see no difference.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This converts tcm_fc to use target_remove_session
tcm_fc was calling transport_deregister_session_configfs then calling
transport_deregister_session when commands have completed. It should be ok
for it to call transport_deregister_session_configfs later via
target_remove_session because transport_deregister_session_configfs only
prevents access from configfs via tpg removal and its call to the
close_session callback for that driver, and this is already protected by
the ft_lport_lock and its port lookup handling.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This converts the drivers that called transport_deregister_session_configfs
and then immediately called transport_deregister_session to use
target_remove_session.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This adds a function to remove a session which should be used by drivers
that use target_setup_session. The next patches will convert the target
drivers to use this new function.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename target_alloc_session to target_setup_session to avoid confusion with
the other transport session allocation function that only allocates the
session and because the target_alloc_session does so much more. It
allocates the session, sets up the nacl and registers the session.
The next patch will then add a remove function to match the setup in this
one, so it should make sense for all drivers, except iscsi, to just call
those 2 functions to setup and remove a session.
iscsi will continue to be the odd driver.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Chris Boot <bootc@bootc.net>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Michael Cyr <mikecyr@linux.vnet.ibm.com>
Cc: <qla2xxx-upstream@qlogic.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
transport_init_session_tags is only called from target_core_transport.c so
make it static.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
__iscsit_start_nopin_timer
Just have iscsit_start_nopin_timer grab the lock and call
__iscsit_start_nopin_timer.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When __transport_register_session is called from transport_register_session
irqs will already have been disabled, so we do not want the unlock irq call
to enable them until the higher level has done the final
spin_unlock_irqrestore/ spin_unlock_irq.
This has __transport_register_session use the save/restore call.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The cxgbit driver expects that __iscsit_free_cmd() is called before the
target core frees the command page list. Since this patch breaks the
cxgbit driver, revert it.
Reported-by: Varun Prakash <varun@chelsio.com>
Fixes: ed88f055788a ("scsi: target/iscsi: Reduce number of __iscsit_free_cmd() callers")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We use unsigned long, size_t and u64 for dev_size. This has us standardize
on u64.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of doing strdup and kstrto* just use match_int for dev params.
It will be ok to use int instead of unsigned long in tcmu_set_dev_attrib
because that is only being used for max sectors and block size and the
supported values for them are well under the max possible integer value.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch prevents a bug where data_bitmap is allocated in
tcmu_configure_device, userspace changes the max_blocks setting, the device
is mapped to a LUN, then we try to access the data_bitmap based on the new
max_blocks limit which may now be out of range.
To prevent this, we just check if data_bitmap has been setup. If it has
then we fail the max_blocks update operation.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The tcmu dev is added to the list of tcmu devices during configuration. At
this time the tcmu setup has completed, but lio core has not completed its
setup. The device is not yet usable so do not try to unmap blocks from it
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Do not allow userspace to block or reset the ring until the device has been
configured. This will prevent the bug where userspace can write to those
files and access mb_addr before it has been setup.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the lio core helper to check if the device is configured.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This just adds a helper function to check if a device is configured and it
converts the target users to use it. The next patch will add a backend
module user so those types of modules do not have to know the lio core
details.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use INIT_LIST_HEAD to initialize node list head.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The caller of queue_cmd_ring grabs and releases the lock, so the
tcmu_setup_cmd_timer failure handling inside queue_cmd_ring should not call
mutex_unlock.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating
max_iso_npdu to get max TCP payload in multiple of mss.
- call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set
csk->submode, it is used in calculating number of iso pdus.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
se_dev_entry.ua_count is only used to check whether or not
se_dev_entry.ua_list is empty. Use list_empty_careful() instead. Checking
whether or not ua_list is empty without holding the lock that protects that
list is fine because the code that dequeues from that list will check again
whether or not that list is empty.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Send a valid ASC / ASCQ combination back to the initiator if a SCSI command
is received after a LUN has been removed. This patch fixes the following
call trace:
WARNING: CPU: 0 PID: 4 at drivers/target/target_core_transport.c:3131 translate_sense_reason+0x164/0x190 [target_core_mod]
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
RIP: 0010:translate_sense_reason+0x164/0x190 [target_core_mod]
Call Trace:
transport_send_check_condition_and_sense+0x95/0x1c0 [target_core_mod]
transport_generic_request_failure+0x102/0x270 [target_core_mod]
transport_generic_new_cmd+0x138/0x340 [target_core_mod]
transport_handle_cdb_direct+0x2f/0x80 [target_core_mod]
target_submit_cmd_map_sgls+0x212/0x2a0 [target_core_mod]
srpt_handle_new_iu+0x244/0x680 [ib_srpt]
__ib_process_cq+0x6d/0xc0 [ib_core]
ib_cq_poll_work+0x18/0x50 [ib_core]
process_one_work+0x20b/0x6a0
worker_thread+0x35/0x380
kthread+0x117/0x130
ret_from_fork+0x24/0x30
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
small
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The code under the "release:" label can only be reached after se_cmd has
been set to a non-NULL value. Hence remove the if (se_cmd) test. Keep the
else-part since calling transport_generic_free_cmd() is not necessary for a
command that has not been submitted to the core.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 4d3895d5ea43 ("target/tcm_loop: Merge struct tcm_loop_cmd and struct tcm_loop_tmr")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since most target drivers do not use the second fabric_make_tpg() argument
("group") and since it is trivial to derive the group pointer from the wwn
pointer, do not pass the group pointer to fabric_make_tpg().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
buffer size
Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of calling __iscsit_free_cmd() from inside iscsit_aborted_task() if
a command has been aborted and from inside iscsit_free_cmd() if a command
has not been aborted, call __iscsit_free_cmd() from inside
lio_release_cmd(). The latter function is namely called for all commands
once the reference count has dropped to zero.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Varun Prakash <varun@chelsio.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of embedding the completion that is used for waiting for command
completion in struct se_cmd, let the context that waits for command
completion allocate it. This makes it possible to have a single code path
for non-aborted and aborted commands in target_release_cmd_kref() and
avoids that transport_generic_free_cmd() has to call
cmd->se_tfo->release_cmd() directly. This patch does not change any
functionality. Note: transport_generic_free_cmd() only waits until the
se_cmd reference count has reached zero after it has set both
CMD_T_FABRIC_STOP and CMD_T_ABORTED.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since target_wait_free_cmd() skips TMFs with no associated LUN, it is safe
to call that function for such commands. Use this to simplify
transport_generic_free_cmd(). The only functional change in this patch is
that CMD_T_FABRIC_STOP gets set for TMFs with no associated LUN by
transport_generic_free_cmd().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move identical code outside an if/else statement. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For the two calls to transport_cmd_finish_abort() outside
core_tmr_handle_tas_abort() it is guaranteed that CMD_T_TAS is not set. Use
this property to fold core_tmr_handle_tas_abort() into
transport_cmd_finish_abort(). This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The code that can set CMD_T_TAS is executed by the same thread as the
thread that executes core_tmr_handle_tas_abort(). That means that no
locking is needed to check CMD_T_TAS from inside
core_tmr_handle_tas_abort(). This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document those aspects of transport_cmd_check_stop_to_fabric() and
transport_generic_free_cmd() of which it is nontrivial to derive these from
their implementation.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
being aborted
Target drivers must call target_sess_cmd_list_set_waiting() and
target_wait_for_sess_cmds() before freeing a session. Since freeing a
session is only safe after all commands that are associated with a session
have finished, make target_wait_for_sess_cmds() also wait for commands that
are being aborted. Instead of setting a flag in each pending command from
target_sess_cmd_list_set_waiting() and waiting in
target_wait_for_sess_cmds() on a per-command completion, only set a
per-session flag in the former function and wait on a per-session
completion in the latter function. This change is safe because once a SCSI
initiator system has submitted a command a target system is always allowed
to execute it to completion. See also commit 0f4a943168f3 ("target: Fix
remote-port TMR ABORT + se_cmd fabric stop").
This patch is based on the following two patches:
* Bart Van Assche, target: Simplify session shutdown code, February 19, 2015
(https://github.com/bvanassche/linux/commit/8df5463d7d7619f2f1b70cfe5172eaef0aa52815).
* Christoph Hellwig, target: Rework session shutdown code, December 7, 2015
(http://thread.gmane.org/gmane.linux.scsi.target.devel/10695).
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Other than initializing xcopy_pt_sess.sess_wait_list, this patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch does not change any functionality but makes the next patch
easier to read.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|