summaryrefslogtreecommitdiff
path: root/drivers/tty/n_gsm.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01Merge tag 'tty-4.16-rc1' of ↵Linus Torvalds1-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/staging driver updates from Greg KH: "Here is the big tty/serial driver update for 4.16-rc1. The usual number of various serial driver fixes and updates to try to get them to work with crazy hardware configurations (seriously, how many different ways are hardware engineers going to come up with to hook up a simple UART?) There is also some serdev bugfixes and updates, as well as a smattering of other small fixes in here. All have been in the linux-next tree for a while, with no reported issues" * tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits) tty: serial: exar: Relocate sleep wake-up handling tty: fix data race between tty_init_dev and flush of buf serial: imx: fix endless loop during suspend serial: core: mark port as initialized after successful IRQ change serdev: only match serdev devices serdev: do not generate modaliases for controllers serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction serial: 8250_dw: Revert "Improve clock rate setting" MAINTAINERS: Add myself as designated reviewer for 8250_dw gpio: serial: max310x: Support open-drain configuration for GPIOs serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers serial: 8250_ingenic: Parse earlycon options serial: 8250_ingenic: Add support for the JZ4770 SoC serial: core: Make uart_parse_options take const char* argument serial: 8250_of: fix return code when probe function fails to get reset serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS serial: 8250_uniphier: fix error return code in uniphier_uart_probe() tty: n_gsm: Allow ADM response in addition to UA for control dlci tty: omap-serial: Fix initial on-boot RTS GPIO level tty: serial: jsm: Add one check against NULL pointer dereference ...
2018-01-09tty: n_gsm: Allow ADM response in addition to UA for control dlciTony Lindgren1-3/+14
Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial@vger.kernel.org Cc: Alan Cox <alan@llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal@aksignal.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-28tty: n_gsm: remove redundant pointer gsmColin Ian King1-2/+0
Pointer gsm is assigned a value that is never read, hence it is redundant and can be removed. Cleans up clang warning: drivers/tty/n_gsm.c:2979:2: warning: Value stored to 'gsm' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-22treewide: setup_timer() -> timer_setup()Kees Cook1-6/+6
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-08tty: Remove redundant license textGreg Kroah-Hartman1-13/+0
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: James Hogan <jhogan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman1-0/+1
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-03drivers: tty: n_gsm: use setup_timer() helper.Allen Pais1-3/+1
Use setup_timer function instead of initializing timer with the function and data fields. Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28tty: n_gsm: Add compat_ioctlLars Poeschel1-0/+11
To use this driver with 32 bit userspace applications on 64 bit kernels a compat_ioctl is needed. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-1/+1
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-03tty: n_gsm: do not send/receive in ldisc close pathSascha Hauer1-19/+35
gsm_cleanup_mux() is called in the line discipline close path which is called at tty_release() time. At this stage the tty is no longer operational enough to send any frames. Sending close frames is therefore not possible and waiting for their answers always times out. This patch removes sending close messages and waiting for their answers from the tty_release path. This patch makes explicit what previously implicitly had been the case already: We are not able to tell the modem that we are about to close the multiplexer on our side. This means the modem will stay in multiplexer mode and re-establishing the multiplexer later fails. The only way for userspace to work around this is to manually send a close frame in N_TTY mode after closing the mux. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17tty: n_gsm: Use net_device_stats from struct net_deviceTobias Klauser1-15/+6
Instead of using a private copy of struct net_device_stats in struct gsm_mux_net, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-1/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-20net: use core MTU range checking in wireless driversJarod Wilson1-10/+2
- set max_mtu in wil6210 driver - set max_mtu in atmel driver - set min/max_mtu in cisco airo driver, remove airo_change_mtu - set min/max_mtu in ipw2100/ipw2200 drivers, remove libipw_change_mtu - set min/max_mtu in p80211netdev, remove wlan_change_mtu - set min/max_mtu in net/mac80211/iface.c and remove ieee80211_change_mtu - set min/max_mtu in wimax/i2400m and remove i2400m_change_mtu - set min/max_mtu in intersil/hostap and remove prism2_change_mtu - set min/max_mtu in intersil/orinoco - set min/max_mtu in tty/n_gsm and remove gsm_change_mtu CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Maya Erez <qca_merez@qca.qualcomm.com> CC: Simon Kelley <simon@thekelleys.org.uk> CC: Stanislav Yakovlev <stas.yakovlev@gmail.com> CC: Johannes Berg <johannes@sipsolutions.net> CC: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-21Merge tag 'tty-4.7-rc1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-1/+1
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley1-5/+3
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-29TTY: n_gsm, fix false positive WARN_ONJiri Slaby1-1/+3
Dmitry reported, that the current cleanup code in n_gsm can trigger a warning: WARNING: CPU: 2 PID: 24238 at drivers/tty/n_gsm.c:2048 gsm_cleanup_mux+0x166/0x6b0() ... Call Trace: ... [<ffffffff81247ab9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:490 [<ffffffff828d0456>] gsm_cleanup_mux+0x166/0x6b0 drivers/tty/n_gsm.c:2048 [<ffffffff828d4d87>] gsmld_open+0x5b7/0x7a0 drivers/tty/n_gsm.c:2386 [<ffffffff828b9078>] tty_ldisc_open.isra.2+0x78/0xd0 drivers/tty/tty_ldisc.c:447 [<ffffffff828b973a>] tty_set_ldisc+0x1ca/0xa70 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff828a14ea>] tty_ioctl+0xb2a/0x2140 drivers/tty/tty_io.c:2883 ... But this is a legal path when open fails to find a space in the gsm_mux array and tries to clean up. So make it a standard test instead of a warning. Reported-by: "Dmitry Vyukov" <dvyukov@google.com> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/CACT4Y+bHQbAB68VFi7Romcs-Z9ZW3kQRvcq+BvHH1oa5NcAdLA@mail.gmail.com Fixes: 5a640967 ("tty/n_gsm.c: fix a memory leak in gsmld_open()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-29tty: Use termios c_*flag macrosPeter Hurley1-3/+3
Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Remove chars_in_buffer() line discipline methodPeter Hurley1-16/+0
The chars_in_buffer() line discipline method serves no functional purpose, other than as a (dubious) debugging aid for mostly bit-rotting drivers. Despite being documented as an optional method, every caller is unconditionally executed (although conditionally compiled). Furthermore, direct tty->ldisc access without an ldisc ref is unsafe. Lastly, N_TTY's chars_in_buffer() has warned of removal since 3.12. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-24tty: Convert use of __constant_htons to htonsVaishali Thakkar1-1/+1
In little endian cases, macro htons unfolds to __swab16 which provides special case for constants. In big endian cases, __constant_htons and htons expand directly to the same expression. So, replace __constant_htons with htons with the goal of getting rid of the definition of __constant_htons completely. The semantic patch that performs this transformation is as follows: @@expression x;@@ - __constant_htons(x) + htons(x) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24tty: Spelling s/reseved/reserved/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-19Merge 4.1-rc4 into tty-nextGreg Kroah-Hartman1-3/+2
This resolves some tty driver merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10tty/n_gsm.c: fix a memory leak when gsmtty is removedPan Xinhui1-3/+2
when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Fixes: dfabf7ffa30585 Cc: stable <stable@vger.kernel.org> # 3.14+ Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06tty: remove buf parameter from tty_name()Rasmus Villemoes1-2/+1
tty_name no longer uses the buf parameter, so remove it along with all the 64 byte stack buffers that used to be passed in. Mostly generated by the coccinelle script @depends on patch@ identifier buf; constant C; expression tty; @@ - char buf[C]; <+... - tty_name(tty, buf) + tty_name(tty) ...+> allmodconfig compiles, so I'm fairly confident the stack buffers weren't used for other purposes as well. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-10n_gsm: Drop unneeded cast on netdev_privJulia Lawall1-5/+5
The result of netdev_priv is already implicitly cast to the type of the left side of the assignment. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; @@ x = - (T *) netdev_priv(...) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tty/n_gsm: fix sparse warningLad, Prabhakar1-1/+1
this patch fixes following sparse warning: n_gsm.c:2827:22: warning: symbol 'tty_ldisc_packet' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-3/+2
Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...
2014-08-02tty/n_gsm.c: fix a memory leak in gsmld_openxinhui.pan1-1/+8
If gsmld_attach_gsm fails, the gsm is not used anymore. tty core will not call gsmld_close to do the cleanup work. tty core just restore to the tty old ldisc. That always causes memory leak. Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com> Reported-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-02tty: n_gsm, use setup_timerJiri Slaby1-3/+1
Just a simple cleanup of init_timer with setting the fields manually. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-24tty/n_gsm.c: get gsm->num after gsm_activate_muxxinhui.pan1-2/+2
gsm->num is the index of gsm_mux[], it's invalid before calling gsm_activate_mux. Signed-off-by: xinhui.pan <xinhuiX.pan@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-16net: set name_assign_type in alloc_netdev()Tom Gundersen1-3/+2
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07tty: n_gsm: Fix for modems with brk in modem status controlLars Poeschel1-0/+11
3GPP TS 07.10 states in section 5.4.6.3.7: "The length byte contains the value 2 or 3 ... depending on the break signal." The break byte is optional and if it is sent, the length is 3. In fact the driver was not able to work with modems that send this break byte in their modem status control message. If the modem just sends the break byte if it is really set, then weird things might happen. The code for deconding the modem status to the internal linux presentation in gsm_process_modem has already a big comment about this 2 or 3 byte length thing and it is already able to decode the brk, but the code calling the gsm_process_modem function in gsm_control_modem does not encode it and hand it over the right way. This patch fixes this. Without this fix if the modem sends the brk byte in it's modem status control message the driver will hang when opening a muxed channel. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()Chuansheng Liu1-4/+1
Commit 4d9b109060f690f5c835(tty: Prevent deadlock in n_gsm driver) tried to close all the virtual ports synchronously before closing the phycial ports, so the tty_vhangup() is used. But the tty_unlock/lock() is wrong: tty_release tty_ldisc_release tty_lock_pair(tty, o_tty) < == Here the tty is for physical port tty_ldisc_kill gsmld_close gsm_cleanup_mux gsm_dlci_release tty = tty_port_tty_get(&dlci->port) < == Here the tty(s) are for virtual port They are different ttys, so before tty_vhangup(virtual tty), do not need to call the tty_unlock(virtual tty) at all which causes unbalanced unlock warning. When enabling mutex debugging option, we will hit the below warning also: [ 99.276903] ===================================== [ 99.282172] [ BUG: bad unlock balance detected! ] [ 99.287442] 3.10.20-261976-gaec5ba0 #44 Tainted: G O [ 99.293972] ------------------------------------- [ 99.299240] mmgr/152 is trying to release lock (&tty->legacy_mutex) at: [ 99.306693] [<c1b2dcad>] mutex_unlock+0xd/0x10 [ 99.311669] but there are no more locks to release! [ 99.317131] [ 99.317131] other info that might help us debug this: [ 99.324440] 3 locks held by mmgr/152: [ 99.328542] #0: (&tty->legacy_mutex/1){......}, at: [<c1b30ab0>] tty_lock_nested+0x40/0x90 [ 99.338116] #1: (&tty->ldisc_mutex){......}, at: [<c15dbd02>] tty_ldisc_kill+0x22/0xd0 [ 99.347284] #2: (&gsm->mutex){......}, at: [<c15e3d83>] gsm_cleanup_mux+0x73/0x170 [ 99.356060] [ 99.356060] stack backtrace: [ 99.360932] CPU: 0 PID: 152 Comm: mmgr Tainted: G O 3.10.20-261976-gaec5ba0 #44 [ 99.370086] ef4a4de0 ef4a4de0 ef4c1d98 c1b27b91 ef4c1db8 c1292655 c1dd10f5 c1b2dcad [ 99.378921] c1b2dcad ef4a4de0 ef4a528c ffffffff ef4c1dfc c12930dd 00000246 00000000 [ 99.387754] 00000000 00000000 c15e1926 00000000 00000001 ddfa7530 00000003 c1b2dcad [ 99.396588] Call Trace: [ 99.399326] [<c1b27b91>] dump_stack+0x16/0x18 [ 99.404307] [<c1292655>] print_unlock_imbalance_bug+0xe5/0xf0 [ 99.410840] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.416110] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.421382] [<c12930dd>] lock_release_non_nested+0x1cd/0x210 [ 99.427818] [<c15e1926>] ? gsm_destroy_network+0x36/0x130 [ 99.433964] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.439235] [<c12931a2>] lock_release+0x82/0x1c0 [ 99.444505] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.449776] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.455047] [<c1b2dc2f>] __mutex_unlock_slowpath+0x5f/0xd0 [ 99.461288] [<c1b2dcad>] mutex_unlock+0xd/0x10 [ 99.466365] [<c1b30bb1>] tty_unlock+0x21/0x50 [ 99.471345] [<c15e3dd1>] gsm_cleanup_mux+0xc1/0x170 [ 99.476906] [<c15e44d2>] gsmld_close+0x52/0x90 [ 99.481983] [<c15db905>] tty_ldisc_close.isra.1+0x35/0x50 [ 99.488127] [<c15dbd0c>] tty_ldisc_kill+0x2c/0xd0 [ 99.493494] [<c15dc7af>] tty_ldisc_release+0x2f/0x50 [ 99.499152] [<c15d572c>] tty_release+0x37c/0x4b0 [ 99.504424] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.509695] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.514967] [<c1372f6e>] ? eventpoll_release_file+0x7e/0x90 [ 99.521307] [<c1335849>] __fput+0xd9/0x200 [ 99.525996] [<c133597d>] ____fput+0xd/0x10 [ 99.530685] [<c125c731>] task_work_run+0x81/0xb0 [ 99.535957] [<c12019e9>] do_notify_resume+0x49/0x70 [ 99.541520] [<c1b30dc4>] work_notifysig+0x29/0x31 [ 99.546897] ------------[ cut here ]------------ So here we can call tty_vhangup() directly which is for virtual port. Reviewed-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17drivers: tty: Mark the functions as static in n_gsm.cRashika Kheria1-9/+5
Marks the functions gsm_cleanup_mux(), gsm_activate_mux(), gsm_free_mux(), gsm_alloc_mux() and gsm_change_mtu() as static in n_gsm.c because they are not used outside this file. Also, drop the EXPORT_SYMBOL_GPL for the above mentioned functions because nothing else in the kernel calls them. This eliminates the following warnings in n_gsm.c: drivers/tty/n_gsm.c:2022:6: warning: no previous prototype for ‘gsm_cleanup_mux’ [-Wmissing-prototypes] drivers/tty/n_gsm.c:2076:5: warning: no previous prototype for ‘gsm_activate_mux’ [-Wmissing-prototypes] drivers/tty/n_gsm.c:2120:6: warning: no previous prototype for ‘gsm_free_mux’ [-Wmissing-prototypes] drivers/tty/n_gsm.c:2156:17: warning: no previous prototype for ‘gsm_alloc_mux’ [-Wmissing-prototypes] drivers/tty/n_gsm.c:2714:5: warning: no previous prototype for ‘gsm_change_mtu’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09n_gsm: race between ld close and gsmtty openChao Bi1-10/+29
ttyA has ld associated to n_gsm, when ttyA is closing, it triggers to release gsmttyB's ld data dlci[B], then race would happen if gsmttyB is opening in parallel. (Note: This patch set differs from previous set in that it uses mutex instead of spin lock to avoid race, so that it avoids sleeping in automic context) Here are race cases we found recently in test: CASE #1 ==================================================================== releasing dlci[B] race with gsmtty_install(gsmttyB), then panic in gsmtty_open(gsmttyB), as below: tty_release(ttyA) tty_open(gsmttyB) | | ----- gsmtty_install(gsmttyB) | | ----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B] tty_ldisc_release(ttyA) ----- | | gsm_dlci_release(dlci[B]) ----- | | gsm_dlci_free(dlci[B]) ----- | | ----- gsmtty_open(gsmttyB) gsmtty_open() { struct gsm_dlci *dlci = tty->driver_data; => here it uses dlci[B] ... } In gsmtty_open(gsmttyA), it uses dlci[B] which was release, so hit a panic. ===================================================================== CASE #2 ===================================================================== releasing dlci[0] race with gsmtty_install(gsmttyB), then panic in gsmtty_open(), as below: tty_release(ttyA) tty_open(gsmttyB) | | ----- gsmtty_install(gsmttyB) | | ----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B] | | ----- gsmtty_open(gsmttyB) fail | | ----- tty_release(gsmttyB) | | ----- gsmtty_close(gsmttyB) | | ----- gsmtty_detach_dlci(dlci[B]) | | ----- dlci_put(dlci[B]) | | tty_ldisc_release(ttyA) ----- | | gsm_dlci_release(dlci[0]) ----- | | gsm_dlci_free(dlci[0]) ----- | | ----- dlci_put(dlci[0]) In gsmtty_detach_dlci(dlci[B]), it tries to use dlci[0] which was released, then hit panic. ===================================================================== IMHO, n_gsm tty operations would refer released ldisc, as long as gsm_dlci_release() has chance to release ldisc data when some gsmtty operations are ongoing.. This patch is try to avoid it by: 1) in n_gsm driver, use a global gsm mutex lock to avoid gsm_dlci_release() run in parallel with gsmtty_install(); 2) Increase dlci's ref count in gsmtty_install() instead of in gsmtty_open(), the purpose is to prevent gsm_dlci_release() releasing dlci after gsmtty_install() allocats dlci but before gsmtty_open increases dlci's ref count; 3) Decrease dlci's ref count in gsmtty_remove(), a tty framework API, this is the opposite process of step 2). Signed-off-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-09tty: Always handle NULL flag ptrPeter Hurley1-2/+3
Most line disciplines already handle the undocumented NULL flag ptr in their .receive_buf method; however, several don't. Document the NULL flag ptr, and correct handling in the N_MOUSE, N_GSM0710 and N_R394 line disciplines. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25Drivers: tty: n_gsm.c: fixed 7 errors & 6 warnings that checkpatch complainedAldo Iljazi1-13/+16
Specifically: n_gsm.c:810: ERROR: space required before the open parenthesis '(' n_gsm.c:830: WARNING: line over 80 characters n_gsm.c:971: ERROR: trailing whitespace n_gsm.c:984: ERROR: code indent should use tabs where possible n_gsm.c:984: WARNING: please, no space before tabs n_gsm.c:984: WARNING: please, no spaces at the start of a line n_gsm.c:1141: WARNING: space prohibited before semicolon n_gsm.c:1743: ERROR: space required before the open brace '{' n_gsm.c:1744: WARNING: line over 80 characters n_gsm.c:1745: ERROR: code indent should use tabs where possible n_gsm.c:1746: ERROR: code indent should use tabs where possible n_gsm.c:2908: WARNING: line over 80 characters n_gsm.c:2912: ERROR: trailing whitespace Signed-off-by: Aldo Iljazi <neonsync1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-19TTY: fix DTR not being dropped on hang upJohan Hovold1-0/+4
Move HUPCL handling to port shutdown so that DTR is dropped also on hang up (tty_port_close is a noop for hung-up ports). Also do not try to drop DTR for uninitialised ports where it has never been raised (e.g. after a failed open). Note that this is also the current behaviour of serial-core. Nine drivers currently call tty_port_close_start directly (rather than through tty_port_close) and seven of them lower DTR as part of their close (if the port has been initialised). Fixup the remaining two drivers so that it continues to be lowered also on normal (non-HUP) close. [ Note that most of those other seven drivers did not expect DTR to have been dropped by tty_port_close_start in the first place. ] Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-19TTY: add tty_port_tty_hangup helperJiri Slaby1-5/+1
It allows for cleaning up on a considerable amount of places. They did port_get, hangup, kref_put. Now the only thing needed is to call tty_port_tty_hangup which does exactly that. And they can also decide whether to consider CLOCAL or completely ignore that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-30tty: Prevent deadlock in n_gsm driverDirkjan Bussink1-1/+41
This change fixes a deadlock when the multiplexer is closed while there are still client side ports open. When the multiplexer is closed and there are active tty's it tries to close them with tty_vhangup. This has a problem though, because tty_vhangup needs the tty_lock. This patch changes it to unlock the tty_lock before attempting the hangup and relocks afterwards. The additional call to tty_port_tty_set is needed because otherwise the port stays active because of the reference counter. This change also exposed another problem that other code paths don't expect that the multiplexer could have been closed. This patch also adds checks for these cases in the gsmtty_ class of function that could be called. The documentation explicitly states that "first close all virtual ports before closing the physical port" but we've found this to not always reality in our field situations. The GPRS / UTMS modem sometimes crashes and needs a power cycle in that case which means cleanly shutting down everything is not always possible. This change makes it much more robust for our situation where at least the system is recoverable with this patch and doesn't hang in a deadlock situation inside the kernel. The patch is against the long term support kernel (3.4.27) and should apply cleanly to more recent branches. Tested with a Telit GE864-QUADV2 and Telit HE910 modem. Signed-off-by: Dirkjan Bussink <dirkjan.bussink@nedap.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16Revert "n_gsm.c: add tx_lock in gsm_send"Greg Kroah-Hartman1-3/+0
This reverts commit f96f7f7f39af53274d98aa9c29d6fa4d122218a4, at the request of Jin. Cc: xiaojin <jin.xiao@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16TTY: switch tty_flip_buffer_pushJiri Slaby1-31/+27
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16TTY: switch tty_insert_flip_stringJiri Slaby1-1/+1
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16TTY: switch tty_insert_flip_charJiri Slaby1-10/+14
Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_char is the next one to proceed. This one is used all over the code, so the patch is huge. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-16n_gsm.c: add tx_lock in gsm_sendxiaojin1-0/+3
All the call to gsm->output should be in the tx_lock, that could avoid potential race from MUX level. But we have no tx_lock in gsm_send. This patch is to add tx_lock in gsm_send. Signed-off-by: xiaojin <jin.xiao@intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16TTY: n_gsm, use kref from tty_portJiri Slaby1-6/+5
After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17tty: n_gsm: Fix incorrect debug displayAlan Cox1-1/+1
In the trace we print the wrong values for N(R) on an I frame. Correct the mask. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>