summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLEGeert Uytterhoeven1-0/+2
[ Upstream commit d142585bceb3218ad432ed0fcd5be9d6e3cd9052 ] If CONFIG_CONSOLE_POLL=y, and CONFIG_SERIAL_CPM=m (hence CONFIG_SERIAL_CPM_CONSOLE=n): drivers/tty/serial/cpm_uart/cpm_uart_core.c:1109:12: warning: ‘udbg_cpm_getc’ defined but not used [-Wunused-function] 1109 | static int udbg_cpm_getc(void) | ^~~~~~~~~~~~~ drivers/tty/serial/cpm_uart/cpm_uart_core.c:1095:13: warning: ‘udbg_cpm_putc’ defined but not used [-Wunused-function] 1095 | static void udbg_cpm_putc(char c) | ^~~~~~~~~~~~~ Fix this by making the udbg definitions depend on CONFIG_SERIAL_CPM_CONSOLE, in addition to CONFIG_CONSOLE_POLL. Fixes: a60526097f42eb98 ("tty: serial: cpm_uart: Add udbg support for enabling xmon") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20211027075326.3270785-1-geert@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18serial: xilinx_uartps: Fix race condition causing stuck TXAnssi Hannula1-1/+2
[ Upstream commit 88b20f84f0fe47409342669caf3e58a3fc64c316 ] xilinx_uartps .start_tx() clears TXEMPTY when enabling TXEMPTY to avoid any previous TXEVENT event asserting the UART interrupt. This clear operation is done immediately after filling the TX FIFO. However, if the bytes inserted by cdns_uart_handle_tx() are consumed by the UART before the TXEMPTY is cleared, the clear operation eats the new TXEMPTY event as well, causing cdns_uart_isr() to never receive the TXEMPTY event. If there are bytes still queued in circbuf, TX will get stuck as they will never get transferred to FIFO (unless new bytes are queued to circbuf in which case .start_tx() is called again). While the racy missed TXEMPTY occurs fairly often with short data sequences (e.g. write 1 byte), in those cases circbuf is usually empty so no action on TXEMPTY would have been needed anyway. On the other hand, longer data sequences make the race much more unlikely as UART takes longer to consume the TX FIFO. Therefore it is rare for this race to cause visible issues in general. Fix the race by clearing the TXEMPTY bit in ISR *before* filling the FIFO. The TXEMPTY bit in ISR will only get asserted at the exact moment the TX FIFO *becomes* empty, so clearing the bit before filling FIFO does not cause an extra immediate assertion even if the FIFO is initially empty. This is hard to reproduce directly on a normal system, but inserting e.g. udelay(200) after cdns_uart_handle_tx(port), setting 4000000 baud, and then running "dd if=/dev/zero bs=128 of=/dev/ttyPS0 count=50" reliably reproduces the issue on my ZynqMP test system unless this fix is applied. Fixes: 85baf542d54e ("tty: xuartps: support 64 byte FIFO size") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20211026102741.2910441-1-anssi.hannula@bitwise.fi Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18serial: imx: fix detach/attach of serial consoleStefan Agner1-2/+2
[ Upstream commit 6d0d1b5a1b4870911beb89544ec1a9751c42fec7 ] If the device used as a serial console gets detached/attached at runtime, register_console() will try to call imx_uart_setup_console(), but this is not possible since it is marked as __init. For instance # cat /sys/devices/virtual/tty/console/active tty1 ttymxc0 # echo -n N > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console # echo -n Y > /sys/devices/virtual/tty/console/subsystem/ttymxc0/console [ 73.166649] 8<--- cut here --- [ 73.167005] Unable to handle kernel paging request at virtual address c154d928 [ 73.167601] pgd = 55433e84 [ 73.167875] [c154d928] *pgd=8141941e(bad) [ 73.168304] Internal error: Oops: 8000000d [#1] SMP ARM [ 73.168429] Modules linked in: [ 73.168522] CPU: 0 PID: 536 Comm: sh Not tainted 5.15.0-rc6-00056-g3968ddcf05fb #3 [ 73.168675] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 73.168791] PC is at imx_uart_console_setup+0x0/0x238 [ 73.168927] LR is at try_enable_new_console+0x98/0x124 [ 73.169056] pc : [<c154d928>] lr : [<c0196f44>] psr: a0000013 [ 73.169178] sp : c2ef5e70 ip : 00000000 fp : 00000000 [ 73.169281] r10: 00000000 r9 : c02cf970 r8 : 00000000 [ 73.169389] r7 : 00000001 r6 : 00000001 r5 : c1760164 r4 : c1e0fb08 [ 73.169512] r3 : c154d928 r2 : 00000000 r1 : efffcbd1 r0 : c1760164 [ 73.169641] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 73.169782] Control: 10c5387d Table: 8345406a DAC: 00000051 [ 73.169895] Register r0 information: non-slab/vmalloc memory [ 73.170032] Register r1 information: non-slab/vmalloc memory [ 73.170158] Register r2 information: NULL pointer [ 73.170273] Register r3 information: non-slab/vmalloc memory [ 73.170397] Register r4 information: non-slab/vmalloc memory [ 73.170521] Register r5 information: non-slab/vmalloc memory [ 73.170647] Register r6 information: non-paged memory [ 73.170771] Register r7 information: non-paged memory [ 73.170892] Register r8 information: NULL pointer [ 73.171009] Register r9 information: non-slab/vmalloc memory [ 73.171142] Register r10 information: NULL pointer [ 73.171259] Register r11 information: NULL pointer [ 73.171375] Register r12 information: NULL pointer [ 73.171494] Process sh (pid: 536, stack limit = 0xcd1ba82f) [ 73.171621] Stack: (0xc2ef5e70 to 0xc2ef6000) [ 73.171731] 5e60: ???????? ???????? ???????? ???????? [ 73.171899] 5e80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172059] 5ea0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172217] 5ec0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172377] 5ee0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172537] 5f00: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172698] 5f20: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.172856] 5f40: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173016] 5f60: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173177] 5f80: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173336] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173496] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173654] 5fe0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.173826] [<c0196f44>] (try_enable_new_console) from [<c01984a8>] (register_console+0x10c/0x2ec) [ 73.174053] [<c01984a8>] (register_console) from [<c06e2c90>] (console_store+0x14c/0x168) [ 73.174262] [<c06e2c90>] (console_store) from [<c0383718>] (kernfs_fop_write_iter+0x110/0x1cc) [ 73.174470] [<c0383718>] (kernfs_fop_write_iter) from [<c02cf5f4>] (vfs_write+0x31c/0x548) [ 73.174679] [<c02cf5f4>] (vfs_write) from [<c02cf970>] (ksys_write+0x60/0xec) [ 73.174863] [<c02cf970>] (ksys_write) from [<c0100080>] (ret_fast_syscall+0x0/0x1c) [ 73.175052] Exception stack(0xc2ef5fa8 to 0xc2ef5ff0) [ 73.175167] 5fa0: ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175327] 5fc0: ???????? ???????? ???????? ???????? ???????? ???????? ???????? ???????? [ 73.175486] 5fe0: ???????? ???????? ???????? ???????? [ 73.175608] Code: 00000000 00000000 00000000 00000000 (00000000) [ 73.175744] ---[ end trace 9b75121265109bf1 ]--- A similar issue could be triggered by unbinding/binding the serial console device [*]. Drop __init so that imx_uart_setup_console() can be safely called at runtime. [*] https://lore.kernel.org/all/20181114174940.7865-3-stefan@agner.ch/ Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20211020192643.476895-2-francesco.dolcini@toradex.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18serial: 8250_dw: Drop wrong use of ACPI_PTR()Andy Shevchenko1-1/+1
[ Upstream commit ebabb77a2a115b6c5e68f7364b598310b5f61fb2 ] ACPI_PTR() is more harmful than helpful. For example, in this case if CONFIG_ACPI=n, the ID table left unused which is not what we want. Instead of adding ifdeffery here and there, drop ACPI_PTR(). Fixes: 6a7320c4669f ("serial: 8250_dw: Add ACPI 5.0 support") Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20211005134516.23218-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18Revert "serial: 8250: Fix reporting real baudrate value in c_ospeed field"Johan Hovold1-17/+0
commit d02b006b29de14968ba4afa998bede0d55469e29 upstream. This reverts commit 32262e2e429cdb31f9e957e997d53458762931b7. The commit in question claims to determine the inverse of serial8250_get_divisor() but failed to notice that some drivers override the default implementation using a get_divisor() callback. This means that the computed line-speed values can be completely wrong and results in regular TCSETS requests failing (the incorrect values would also be passed to any overridden set_divisor() callback). Similarly, it also failed to honour the old (deprecated) ASYNC_SPD_FLAGS and would break applications relying on those when re-encoding the actual line speed. There are also at least two quirks, UART_BUG_QUOT and an OMAP1510 workaround, which were happily ignored and that are now broken. Finally, even if the offending commit were to be implemented correctly, this is a new feature and not something which should be backported to stable. Cc: Pali Rohár <pali@kernel.org> Fixes: 32262e2e429c ("serial: 8250: Fix reporting real baudrate value in c_ospeed field") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211007133146.28949-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18serial: 8250: Fix reporting real baudrate value in c_ospeed fieldPali Rohár1-0/+17
commit 32262e2e429cdb31f9e957e997d53458762931b7 upstream. In most cases it is not possible to set exact baudrate value to hardware. So fix reporting real baudrate value which was set to hardware via c_ospeed termios field. It can be retrieved by ioctl(TCGETS2) from userspace. Real baudrate value is calculated from chosen hardware divisor and base clock. It is implemented in a new function serial8250_compute_baud_rate() which is inverse of serial8250_get_divisor() function. With this change is fixed also UART timeout value (it is updated via uart_update_timeout() function), which is calculated from the now fixed baudrate value too. Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210927093704.19768-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18serial: 8250: fix racy uartclk updateJohan Hovold1-4/+17
commit 211cde4f5817dc88ef7f8f2fa286e57fbf14c8ee upstream. Commit 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") added a hack to support SoCs where the UART reference clock can change behind the back of the driver but failed to add the proper locking. First, make sure to take a reference to the tty struct to avoid dereferencing a NULL pointer if the clock change races with a hangup. Second, the termios semaphore must be held during the update to prevent a racing termios change. Fixes: 868f3ee6e452 ("serial: 8250: Add 8250 port clock update method") Fixes: c8dff3aa8241 ("serial: 8250: Skip uninitialized TTY port baud rate update") Cc: stable@vger.kernel.org # 5.9 Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru> Tested-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211015111422.1027-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18serial: core: Fix initializing and restoring termios speedPali Rohár1-2/+14
commit 027b57170bf8bb6999a28e4a5f3d78bf1db0f90c upstream. Since commit edc6afc54968 ("tty: switch to ktermios and new framework") termios speed is no longer stored only in c_cflag member but also in new additional c_ispeed and c_ospeed members. If BOTHER flag is set in c_cflag then termios speed is stored only in these new members. Therefore to correctly restore termios speed it is required to store also ispeed and ospeed members, not only cflag member. In case only cflag member with BOTHER flag is restored then functions tty_termios_baud_rate() and tty_termios_input_baud_rate() returns baudrate stored in c_ospeed / c_ispeed member, which is zero as it was not restored too. If reported baudrate is invalid (e.g. zero) then serial core functions report fallback baudrate value 9600. So it means that in this case original baudrate is lost and kernel changes it to value 9600. Simple reproducer of this issue is to boot kernel with following command line argument: "console=ttyXXX,86400" (where ttyXXX is the device name). For speed 86400 there is no Bnnn constant and therefore kernel has to represent this speed via BOTHER c_cflag. Which means that speed is stored only in c_ospeed and c_ispeed members, not in c_cflag anymore. If bootloader correctly configures serial device to speed 86400 then kernel prints boot log to early console at speed speed 86400 without any issue. But after kernel starts initializing real console device ttyXXX then speed is changed to fallback value 9600 because information about speed was lost. This patch fixes above issue by storing and restoring also ispeed and ospeed members, which are required for BOTHER flag. Fixes: edc6afc54968 ("[PATCH] tty: switch to ktermios and new framework") Cc: stable@vger.kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211002130900.9518-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-18Merge tag 'tty-5.15-rc6' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "Here is a single 8250 Kconfig fix for 5.15-rc6 that resolves a regression that showed up in 5.15-rc1. It has been in linux-next for a while with no reported issues" * tag 'tty-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: allow disabling of Freescale 16550 compile test
2021-10-08Merge tag 'for-linus-5.15b-rc5-tag' of ↵Linus Torvalds1-8/+5
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - fix two minor issues in the Xen privcmd driver plus a cleanup patch for that driver - fix multiple issues related to running as PVH guest and some related earlyprintk fixes for other Xen guest types - fix an issue introduced in 5.15 the Xen balloon driver * tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix cancelled balloon action xen/x86: adjust data placement x86/PVH: adjust function/data placement xen/x86: hook up xen_banner() also for PVH xen/x86: generalize preferred console model from PV to PVH Dom0 xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU xen/x86: allow "earlyprintk=xen" to work for PV Dom0 xen/x86: make "earlyprintk=xen" work better for PVH Dom0 xen/x86: allow PVH Dom0 without XEN_PV=y xen/x86: prevent PVH type from getting clobbered xen/privcmd: drop "pages" parameter from xen_remap_pfn() xen/privcmd: fix error handling in mmap-resource processing xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
2021-10-05serial: 8250: allow disabling of Freescale 16550 compile testJohan Hovold1-2/+6
The SERIAL_8250_FSL option is used to enable a workaround for a break-detection erratum for Freescale 16550 UARTs in the 8250 driver and is currently also used to enable support for ACPI enumeration. It is enabled on PPC, ARM and ARM64 whenever 8250 console support is enabled (since the quirk is needed for sysrq handling). Commit b1442c55ce89 ("serial: 8250: extend compile-test coverage") enabled compile testing of the code in question but did not provide a means to disable the option when COMPILE_TEST is enabled. Add a conditional input prompt instead so that SERIAL_8250_FSL is no longer enabled by default when compile testing while continuing to always enable the quirk for platforms that may need it. Fixes: b1442c55ce89 ("serial: 8250: extend compile-test coverage") Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210924141232.4419-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05xen/x86: make "earlyprintk=xen" work for HVM/PVH DomUJan Beulich1-3/+1
xenboot_write_console() is dealing with these quite fine so I don't see why xenboot_console_setup() would return -ENOENT in this case. Adjust documentation accordingly. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/3d212583-700e-8b2d-727a-845ef33ac265@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-10-05xen/x86: make "earlyprintk=xen" work better for PVH Dom0Jan Beulich1-5/+4
The xen_hvm_early_write() path better wouldn't be taken in this case; while port 0xE9 can be used, the hypercall path is quite a bit more efficient. Put that first, as it may also work for DomU-s (see also xen_raw_console_write()). While there also bail from the function when the first domU_write_console() failed - later ones aren't going to succeed. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/4fd89dcb-cfc5-c740-2e94-bb271e432d3e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-14tty: unexport tty_ldisc_releaseJiri Slaby1-1/+0
Initially, tty_ldisc_release() was exported for speakup (spk_tty) while in staging. Later, the call to this function was removed as it was bogus anyway. Remove the export now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210914091134.17426-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14tty: synclink_gt: rename a conflicting function nameRandy Dunlap1-22/+22
'set_signals()' in synclink_gt.c conflicts with an exported symbol in arch/um/, so change set_signals() to set_gtsignals(). Keep the function names similar by also changing get_signals() to get_gtsignals(). ../drivers/tty/synclink_gt.c:442:13: error: conflicting types for ‘set_signals’ static void set_signals(struct slgt_info *info); ^~~~~~~~~~~ In file included from ../include/linux/irqflags.h:16:0, from ../include/linux/spinlock.h:58, from ../include/linux/mm_types.h:9, from ../include/linux/buildid.h:5, from ../include/linux/module.h:14, from ../drivers/tty/synclink_gt.c:46: ../arch/um/include/asm/irqflags.h:6:5: note: previous declaration of ‘set_signals’ was here int set_signals(int enable); ^~~~~~~~~~~ Fixes: 705b6c7b34f2 ("[PATCH] new driver synclink_gt") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210902003806.17054-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14serial: mvebu-uart: fix driver's tx_empty callbackPali Rohár1-1/+1
Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable <stable@vger.kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14serial: 8250: 8250_omap: Fix RX_LVL register offsetNishanth Menon1-1/+1
Commit b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") introduced fixup including a register read to RX_LVL, however, we should be using word offset than byte offset since our registers are on 4 byte boundary (port.regshift = 2) for 8250_omap. Fixes: b67e830d38fa ("serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs") Cc: stable <stable@vger.kernel.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20210903050550.29050-1-nm@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-02Merge tag 'for-5.15/parisc' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture updates from Helge Deller: - Fix a kernel crash when a signal is delivered to bad userspace stack - Fix fall-through warnings in math-emu code - Increase size of gcc stack frame check - Switch coding from 'pci_' to 'dma_' API - Make struct parisc_driver::remove() return void - Some parisc related Makefile changes - Minor cleanups, e.g. change to octal permissions, fix macro collisions, fix PMD_ORDER collision, replace spaces with tabs * tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: math-emu: Fix fall-through warnings parisc: fix crash with signals and alloca parisc: Fix compile failure when building 64-bit kernel natively parisc: ccio-dma.c: Added tab instead of spaces parisc/parport_gsc: switch from 'pci_' to 'dma_' API parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild parisc: switch from 'pci_' to 'dma_' API parisc: Make struct parisc_driver::remove() return void parisc: remove unused arch/parisc/boot/install.sh and its phony target parisc: Rename PMD_ORDER to PMD_TABLE_ORDER parisc: math-emu: Avoid "fmt" macro collision parisc: Increase size of gcc stack frame check parisc: Replace symbolic permissions with octal permissions
2021-09-01Merge tag 'tty-5.15-rc1' of ↵Linus Torvalds46-534/+804
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-09-01Merge tag 'net-next-5.15' of ↵Linus Torvalds1-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-30vt_kdsetmode: extend console lockingLinus Torvalds1-4/+6
As per the long-suffering comment. Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-30console: consume APC, DM, DCSnick black1-4/+27
The Linux console's VT102 implementation already consumes OSC ("Operating System Command") sequences, probably because that's how palette changes are transmitted. In addition to OSC, there are three other major clases of ANSI control strings: APC ("Application Program Command"), PM ("Privacy Message"), and DCS ("Device Control String"). They are handled similarly to OSC in terms of termination. Source: vt100.net Add three new enumerated states, one for each of these types. All three are handled the same way right now--they simply consume input until terminated. I hope to expand upon this firmament in the future. Add new predicate ansi_control_string(), returning true for any of these states. Replace explicit checks against ESosc with calls to this function. Transition to these states appropriately from the escape initiation (ESesc) state. This was motivated by the following Notcurses bugs: https://github.com/dankamongmen/notcurses/issues/2050 https://github.com/dankamongmen/notcurses/issues/1828 https://github.com/dankamongmen/notcurses/issues/2069 where standard VT sequences are not consumed by the Linux console. It's not necessary that the Linux console *support* these sequences, but it ought *consume* these well-specified classes of sequences. Tested by sending a variety of escape sequences to the console, and verifying that they still worked, or were now properly consumed. Verified that the escapes were properly terminated at a generic level. Verified that the Notcurses tools continued to show expected output on the Linux console, except now without escape bleedthrough. Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/ Signed-off-by: nick black <dankamongmen@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-30parisc: Make struct parisc_driver::remove() return voidUwe Kleine-König1-2/+1
The caller of this function (parisc_driver_remove() in arch/parisc/kernel/drivers.c) ignores the return value, so better don't return any value at all to not wake wrong expectations in driver authors. The only function that could return a non-zero value before was ipmi_parisc_remove() which returns the return value of ipmi_si_remove_by_dev(). Make this function return void, too, as for all other callers the value is ignored, too. Also fold in a small checkpatch fix for: WARNING: Unnecessary space before function pointer arguments + void (*remove) (struct parisc_device *dev); Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-08-27tty: serial: uartlite: Use read_poll_timeout for a polling loopSean Anderson1-13/+5
read_poll_timeout was recently introduced, and can be used to simplify our console polling loop. This results in a slight reduction in code. early_uartlite_putc can't get the same treatment, because it can be called before udelay is set up. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210826192549.3203071-1-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-27tty: serial: uartlite: Use constants in early_uartlite_putcSean Anderson1-5/+4
Use the constants defined at the beginning of this file instead of integer literals when accessing registers. This makes this code easier to read, and obviates the need for some explanatory comments. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20210826194323.3209227-1-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: Fix data race between tiocsti() and flush_to_ldisc()Nguyen Dinh Phi1-2/+2
The ops->receive_buf() may be accessed concurrently from these two functions. If the driver flushes data to the line discipline receive_buf() method while tiocsti() is waiting for the ops->receive_buf() to finish its work, the data race will happen. For example: tty_ioctl |tty_ldisc_receive_buf ->tioctsi | ->tty_port_default_receive_buf | ->tty_ldisc_receive_buf ->hci_uart_tty_receive | ->hci_uart_tty_receive ->h4_recv | ->h4_recv In this case, the h4 receive buffer will be overwritten by the latecomer, and we will lost the data. Hence, change tioctsi() function to use the exclusive lock interface from tty_buffer to avoid the data race. Reported-by: syzbot+97388eb9d31b997fe1d0@syzkaller.appspotmail.com Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Link: https://lore.kernel.org/r/20210823000641.2082292-1-phind.uet@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: vt8500: Use of_device_get_match_dataTang Bin1-5/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-4-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: tegra: Use of_device_get_match_dataTang Bin1-4/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-3-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26serial: 8250_ingenic: Use of_device_get_match_dataTang Bin1-4/+2
Retrieve OF match data, it's better and cleaner to use 'of_device_get_match_data' over 'of_match_device'. Acked-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210822032806.3256-2-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: linflexuart: Remove redundant check to simplify the codeTang Bin1-5/+1
In the function uart_add_one_port(), it can return zero or non-zero, so remove redundant check to simplify the code. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210823110754.11232-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxpFugang Duan1-0/+48
Do software reset for communication port on imx7ulp and imx8qxp after the port is registered if the UART controller support the feature. Do partition reset with LPUART's power on, LPUART registers will keep the previous status, like on i.MX8QXP platform, which is not expected action, so need to set the RST bit of GLOBAL register to reset all uart internal logic and registers. Currently, only i.MX7ULP and i.MX8QXP LPUART controllers include global register that support the software reset. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210823091801.17447-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: enable two stop bits for lpuart32Fugang Duan1-2/+6
Add two stop bits support. User can run the command to enable two stop bits for test: stty cstopb -F /dev/ttyLPx Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210823081733.31941-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: serial: fsl_lpuart: fix the wrong mapbase valueAndy Duan1-1/+1
Register offset needs to be applied on mapbase also. dma_tx/rx_request use the physical address of UARTDATA. Register offset is currently only applied to membase (the corresponding virtual addr) but not on mapbase. Fixes: 24b1e5f0e83c ("tty: serial: lpuart: add imx7ulp support") Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Adriana Reus <adriana.reus@nxp.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Andy Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20210819021033.32606-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26mxser: use semi-colons instead of commasDan Carpenter1-6/+6
This code works, but it's cleaner to use semi-colons at the end of a statement instead of a comma. Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210825072435.GB13013@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26tty: moxa: use semi-colons instead of commasDan Carpenter1-4/+4
This code works but it's cleaner to use a semi-colon to end a statement instead of a comma. Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210825072405.GA13013@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callbackFugang Duan1-0/+4
There have a corner case that tx DMA .callback() is coming after .flush_buffer(), then .callback() should check dma_tx_in_progress flag and return in directly. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20210817100203.21300-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16tty: replace in_irq() with in_hardirq()Changbin Du1-2/+2
Replace the obsolete and ambiguos macro in_irq() with new macro in_hardirq(). Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Link: https://lore.kernel.org/r/20210814005033.2381-1-changbin.du@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: sh-sci: fix break handling for sysrqUlrich Hecht1-1/+6
This fixes two issues that cause the sysrq sequence to be inadvertently aborted on SCIF serial consoles: - a NUL character remains in the RX queue after a break has been detected, which is then passed on to uart_handle_sysrq_char() - the break interrupt is handled twice on controllers with multiplexed ERI and BRI interrupts Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210816162201.28801-1-uli+renesas@fpond.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: stm32: use devm_platform_get_and_ioremap_resource()Tang Bin1-2/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210814131418.13608-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16serial: stm32: use the defined variable to simplify codeTang Bin1-2/+2
Use the defined variable 'dev' to make the code cleaner. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210814124951.30084-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16Revert "arm pl011 serial: support multi-irq request"Qian Cai1-31/+3
This reverts commit b0819465be8be0c76af15436a9e6db4dab4c196e which results in amba_device-specific code being called from sbsa_uart_startup() and sbsa_uart_shutdown(). Signed-off-by: Qian Cai <quic_qiancai@quicinc.com> Link: https://lore.kernel.org/r/20210813163135.205-1-quic_qiancai@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski8-13/+37
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13tty: serial: samsung: Add Exynos850 SoC dataSam Protsenko1-0/+13
Add serial driver data for Exynos850 SoC. This driver data is basically reusing EXYNOS_COMMON_SERIAL_DRV_DATA, which is common for all Exynos chips, but also enables USI init, which was added in previous commit: "tty: serial: samsung: Init USI to keep clocks running". Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-7-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13tty: serial: samsung: Fix driver data macros styleSam Protsenko1-2/+2
Make checkpatch happy by fixing this error: ERROR: Macros with complex values should be enclosed in parentheses Although this change is made to keep macros consistent with consequent patches (adding driver data for new SoC), it's intentionally added as a separate patch to ease possible porting efforts in future. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-6-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13tty: serial: samsung: Init USI to keep clocks runningSam Protsenko1-1/+31
UART block is a part of USI (Universal Serial Interface) IP-core in Samsung SoCs since Exynos9810 (e.g. in Exynos850). USI allows one to enable one of three types of serial interface: UART, SPI or I2C. That's possible because USI shares almost all internal circuits within each protocol. USI also provides some additional registers so it's possible to configure it. One USI register called USI_OPTION has reset value of 0x0. Because of this the clock gating behavior is controlled by hardware (HWACG = Hardware Auto Clock Gating), which simply means the serial won't work after reset as is. In order to make it work, USI_OPTION[2:1] bits must be set to 0b01, so that HWACG is controlled manually (by software). Bits meaning: - CLKREQ_ON = 1: clock is continuously provided to IP - CLKSTOP_ON = 0: drive IP_CLKREQ to High (needs to be set along with CLKREQ_ON = 1) USI is not present on older chips, like s3c2410, s3c2412, s3c2440, s3c6400, s5pv210, exynos5433, exynos4210. So the new boolean field '.has_usi' was added to struct s3c24xx_uart_info. USI registers will be only actually accessed when '.has_usi' field is set to "1". This feature is needed for further serial enablement on Exynos850, but some other new Exynos chips (like Exynos9810) may benefit from this feature as well. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20210811114827.27322-5-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13serdev: Split and export serdev_acpi_get_uart_resource()Andy Shevchenko1-7/+29
The same as for I²C Serial Bus resource split and export serdev_acpi_get_uart_resource(). We have already a few users one of which is converted here. Rationale of this is to consolidate parsing UART Serial Bus resource in one place as it's done, e.g., for I²C Serial Bus. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210806111736.66591-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13serial: stm32: fix the conditional expression writingTang Bin1-2/+2
In the function stm32_usart_init_port, intent of the code maybe when irq returns a value of zero, the return should be '-ENODEV'. But the conditional expression '? :' maybe clerical error, it should be '?:' to make '-ENODEV' work. But in fact, as the example in platform.c is * int irq = platform_get_irq(pdev, 0); * if (irq < 0) * return irq; So the return value of zero is unnecessary to check, at last remove the unnecessary '?: -ENODEV'. Co-developed-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20210811105136.25392-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into driver-core-nextGreg Kroah-Hartman8-13/+37
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into tty-nextGreg Kroah-Hartman8-13/+37
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-15 02:27:44 +0300