summaryrefslogtreecommitdiff
path: root/drivers/usb/core
AgeCommit message (Collapse)AuthorFilesLines
2021-07-12USB: core: Fix incorrect pipe calculation in do_proc_control()Alan Stern1-1/+1
When the user submits a control URB via usbfs, the user supplies the bRequestType value and the kernel uses it to compute the pipe value. However, do_proc_control() performs this computation incorrectly in the case where the bRequestType direction bit is set to USB_DIR_IN and the URB's transfer length is 0: The pipe's direction is also set to IN but it should be OUT, which is the direction the actual transfer will use regardless of bRequestType. Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup packet direction") added a check to compare the direction bit in the pipe value to a control URB's actual direction and to WARN if they are different. This can be triggered by the incorrect computation mentioned above, as found by syzbot. This patch fixes the computation, thus avoiding the WARNing. Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-21Merge tag 'v5.13-rc7' into usb-nextGreg Kroah-Hartman1-0/+7
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: core: hub: Disable autosuspend for Cypress CY7C65632Andrew Lunn1-0/+7
The Cypress CY7C65632 appears to have an issue with auto suspend and detecting devices, not too dissimilar to the SMSC 5534B hub. It is easiest to reproduce by connecting multiple mass storage devices to the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts result in the devices not being detected. It is however possible to make them appear using lsusb -v. Disabling autosuspend for this hub resolves the issue. Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: stable@vger.kernel.org Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09USB: core: Avoid WARNings for 0-length descriptor requestsAlan Stern1-0/+6
The USB core has utility routines to retrieve various types of descriptors. These routines will now provoke a WARN if they are asked to retrieve 0 bytes (USB "receive" requests must not have zero length), so avert this by checking the size argument at the start. CC: Johan Hovold <johan@kernel.org> Reported-and-tested-by: syzbot+7dbcd9ff34dc4ed45240@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210607152307.GD1768031@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman1-3/+8
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27USB: core: Check buffer length matches wLength for control transfersAlan Stern1-0/+6
A type of inconsistency that can show up in control URBs is when the setup packet's wLength value does not match the URB's transfer_buffer_length field. The two should always be equal; differences could lead to information leaks or undefined behavior for OUT transfers or overruns for IN transfers. This patch adds a test for such mismatches during URB submission. If the test fails, the submission is rejected with a -EBADR error code (which is not used elsewhere in the USB core), and a debugging message is logged for people interested in tracking down these errors. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210526153244.GA1400430@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27driver core: Move the "removable" attribute from USB to coreRajat Jain2-30/+7
Move the "removable" attribute from USB to core in order to allow it to be supported by other subsystem / buses. Individual buses that want to support this attribute can populate the removable property of the device while enumerating it with the 3 possible values - - "unknown" - "fixed" - "removable" Leaving the field unchanged (i.e. "not supported") would mean that the attribute would not show up in sysfs for that device. The UAPI (location, symantics etc) for the attribute remains unchanged. Move the "removable" attribute from USB to the device core so it can be used by other subsystems / buses. By default, devices do not have a "removable" attribute in sysfs. If a subsystem or bus driver wants to support a "removable" attribute, it should call device_set_removable() before calling device_register() or device_add(), e.g.: device_set_removable(dev, DEVICE_REMOVABLE); device_register(dev); The possible values and the resulting sysfs attribute contents are: DEVICE_REMOVABLE_UNKNOWN -> "unknown" DEVICE_REMOVABLE -> "removable" DEVICE_FIXED -> "fixed" Convert the USB "removable" attribute to use this new device core functionality. There should be no user-visible change in the location or semantics of attribute for USB devices. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rajat Jain <rajatja@google.com> Link: https://lore.kernel.org/r/20210524171812.18095-1-rajatja@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-24USB: usbfs: remove double evaluation of usb_sndctrlpipe()Geoffrey D. Bennett1-1/+1
usb_sndctrlpipe() is evaluated in do_proc_control(), saved in a variable, then evaluated again. Use the saved variable instead, to match the use of usb_rcvctrlpipe(). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/20210521174027.GA116484@m.b4.vu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22USB: core: WARN if pipe direction != setup packet directionAlan Stern1-0/+3
When a control URB is submitted, the direction indicated by URB's pipe member is supposed to match the direction indicated by the setup packet's bRequestType member. A mismatch could lead to trouble, depending on which field the host controller drivers use for determining the actual direction. This shouldn't ever happen; it would represent a careless bug in a kernel driver somewhere. This patch adds a dev_WARN_ONCE to let people know about the potential problem. Suggested-by: "Geoffrey D. Bennett" <g@b4.vu> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210522021623.GB1260282@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21USB: usbfs: Don't WARN about excessively large memory allocationsAlan Stern1-3/+8
Syzbot found that the kernel generates a WARNing if the user tries to submit a bulk transfer through usbfs with a buffer that is way too large. This isn't a bug in the kernel; it's merely an invalid request from the user and the usbfs code does handle it correctly. In theory the same thing can happen with async transfers, or with the packet descriptor table for isochronous transfers. To prevent the MM subsystem from complaining about these bad allocation requests, add the __GFP_NOWARN flag to the kmalloc calls for these buffers. CC: Andrew Morton <akpm@linux-foundation.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21Revert "USB: Add reset-resume quirk for WD19's Realtek Hub"Chris Chiu1-1/+0
This reverts commit ca91fd8c7643 ("USB: Add reset-resume quirk for WD19's Realtek Hub"). The previous patch in the series now handles the problematic hubs by checking the port status and handling it accordingly when PORT_SUSPEND timeout occurs. We don't need to use reset-resume all the time. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Link: https://lore.kernel.org/r/20210514045405.5261-3-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21USB: Verify the port status when timeout happens during port suspendChris Chiu1-0/+21
On the Realtek high-speed Hub(0bda:5487), the port which has wakeup enabled_descendants will sometimes timeout when setting PORT_SUSPEND feature. After checking the PORT_SUSPEND bit in wPortStatus, it is already set which means the port has been suspended. We should treat it suspended to make sure it will be resumed correctly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Link: https://lore.kernel.org/r/20210514045405.5261-2-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-17Merge 5.13-rc2 into usb-nextGreg Kroah-Hartman1-3/+3
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: core: hcd: use map_urb_for_dma for single step set feature urbLi Jun1-10/+6
Use map_urb_for_dma() to improve the dma map code for single step set feature request urb in test mode. Signed-off-by: Li Jun <jun.li@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/1620452039-11694-3-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to corePeter Chen1-0/+134
It is needed at USB Certification test for Embedded Host 2.0, and the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification. Since other USB 2.0 capable host like XHCI also need it, so move it to HCD core. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620452039-11694-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: core: hub: fix race condition about TRSMRCY of resumeChunfeng Yun1-3/+3
This may happen if the port becomes resume status exactly when usb_port_resume() gets port status, it still need provide a TRSMCRY time before access the device. CC: <stable@vger.kernel.org> Reported-by: Tianping Fang <tianping.fang@mediatek.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210512020738.52961-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22USB: Add reset-resume quirk for WD19's Realtek HubChris Chiu1-0/+1
Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 EthernetKai-Heng Feng1-0/+3
This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-12Revert "usb: Link the ports to the connectors they are attached to"Greg Kroah-Hartman1-3/+0
This reverts commit 63cd78617350dae99cc5fbd8f643b83ee819fe33 as it causes a build error: depmod: ERROR: Cycle detected: usbcore -> typec -> usbcore depmod: ERROR: Found 2 modules in dependency cycles! Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20210412213655.3776e15e@canb.auug.org.au Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10usb: core: reduce power-on-good delay time of root hubChunfeng Yun1-2/+4
Return the exactly delay time given by root hub descriptor, this helps to reduce resume time etc. Due to the root hub descriptor is usually provided by the host controller driver, if there is compatibility for a root hub, we can fix it easily without affect other root hub Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09usb: core: hub: Fix PM reference leak in usb_port_resume()Bixuan Cui1-1/+1
pm_runtime_get_sync will increment pm usage counter even it failed. thus a pairing decrement is needed. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Link: https://lore.kernel.org/r/20210408130831.56239-1-cuibixuan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09usb: Iterator for portsHeikki Krogerus1-0/+46
Introducing usb_for_each_port(). It works the same way as usb_for_each_dev(), but instead of going through every USB device in the system, it walks through the USB ports in the system. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210407065555.88110-4-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-09usb: Link the ports to the connectors they are attached toHeikki Krogerus1-0/+3
Creating link to the USB Type-C connector for every new port that is added when possible. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210407065555.88110-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into usb-nextGreg Kroah-Hartman1-0/+4
We want the USB fixes in here as well and it resolves a merge issue with xhci-mtk.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modemVincent Palatin1-0/+4
This LTE modem (M.2 card) has a bug in its power management: there is some kind of race condition for U3 wake-up between the host and the device. The modem firmware sometimes crashes/locks when both events happen at the same time and the modem fully drops off the USB bus (and sometimes re-enumerates, sometimes just gets stuck until the next reboot). Tested with the modem wired to the XHCI controller on an AMD 3015Ce platform. Without the patch, the modem dropped of the USB bus 5 times in 3 days. With the quirk, it stayed connected for a week while the 'runtime_suspended_time' counter incremented as excepted. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: sysfs: Check for SSP rate in speed attrThinh Nguyen1-1/+4
Check for usb_device->ssp_rate to output the signaling rate for genXxY. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/80a3214592b30da6ca95bb87984f2a9779de0b14.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: hub: Print speed name based on ssp rateThinh Nguyen1-3/+7
Check for usb_device->ssp_rate to print the SuperSpeed Plus signaling rate generation and lane count. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/df0986bbe92251c104dd92e3c796df7c4f2674ce.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: hub: Remove port_speed_is_ssp()Thinh Nguyen1-30/+1
The get_port_ssp_rate() can replace port_speed_is_ssp(). If the port speed is detected to be in gen2x1, gen1x2, or gen2x2, then the port is operating at SuperSpeed Plus. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/dfd61ae637597bad502d2420b4dbd3774fc76aab.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23usb: core: Track SuperSpeed Plus GenXxYThinh Nguyen2-1/+83
Introduce ssp_rate field to usb_device structure to capture the connected SuperSpeed Plus signaling rate generation and lane count with the corresponding usb_ssp_rate enum. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/b7805d121e5ae4ad5ae144bd860b6ac04ee47436.1615432770.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: core: rename usb_driver_claim_interface() data parameterJohan Hovold1-3/+3
It's been almost twenty years since the interface "private data" pointer was removed in favour of using the driver-data pointer of struct device. Let's rename the driver-data parameter of usb_driver_claim_interface() so that it better reflects how it's used. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155406.22399-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-23USB: core: drop outdated interface-binding commentJohan Hovold1-4/+0
It's been almost twenty years since USB drivers returned a data pointer from their probe routines in order to bind to an interface. Time to update the documentation for usb_driver_claim_interface(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210318155406.22399-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-15Merge 5.12-rc3 into usb-nextGreg Kroah-Hartman1-0/+32
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11drm: Use USB controller's DMA mask when importing dmabufsThomas Zimmermann1-0/+32
USB devices cannot perform DMA and hence have no dma_mask set in their device structure. Therefore importing dmabuf into a USB-based driver fails, which breaks joining and mirroring of display in X11. For USB devices, pick the associated USB controller as attachment device. This allows the DRM import helpers to perform the DMA setup. If the DMA controller does not support DMA transfers, we're out of luck and cannot import. Our current USB-based DRM drivers don't use DMA, so the actual DMA device is not important. Tested by joining/mirroring displays of udl and radeon under Gnome/X11. v8: * release dmadev if device initialization fails (Noralf) * fix commit description (Noralf) v7: * fix use-before-init bug in gm12u320 (Dan) v6: * implement workaround in DRM drivers and hold reference to DMA device while USB device is in use * remove dev_is_usb() (Greg) * collapse USB helper into usb_intf_get_dma_device() (Alan) * integrate Daniel's TODO statement (Daniel) * fix typos (Greg) v5: * provide a helper for USB interfaces (Alan) * add FIXME item to documentation and TODO list (Daniel) v4: * implement workaround with USB helper functions (Greg) * use struct usb_device->bus->sysdev as DMA device (Takashi) v3: * drop gem_create_object * use DMA mask of USB controller, if any (Daniel, Christian, Noralf) v2: * move fix to importer side (Christian, Daniel) * update SHMEM and CMA helpers for new PRIME callbacks Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB devices") Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Noralf Trønnes <noralf@tronnes.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2021-03-10usb: common: add function to get interval expressed in us unitChunfeng Yun2-48/+8
Add a new function to convert bInterval into the time expressed in 1us unit. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/25c8a09b055f716c1e5bf11fea72c3418f844482.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10USB: core: no need to save usb_devices_rootGreg Kroah-Hartman1-5/+3
There is no need to save the usb_devices debugfs file as we only need it when removing it, so have the debugfs code look it up when it is needed instead, saving the storage. Link: https://lore.kernel.org/r/YCubCA/trHAF7PtF@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-16kbuild: simplify access to the kernel's versionSasha Levin1-2/+2
Instead of storing the version in a single integer and having various kernel (and userspace) code how it's constructed, export individual (major, patchlevel, sublevel) components and simplify kernel code that uses it. This should also make it easier on userspace. Signed-off-by: Sasha Levin <sashal@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-10usb: quirks: add quirk to start video capture on ELMO L-12F document camera ↵Stefan Ursella1-0/+3
reliable Without this quirk starting a video capture from the device often fails with kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34). Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net> Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10USB: quirks: sort quirk entriesJohan Hovold1-3/+3
Move the last entry to its proper place to maintain the VID/PID sort order. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urbAndrey Konovalov1-5/+3
Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid cluttering the code, hide them in kcov helpers instead. Fixes: aee9ddb1d371 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07USB: add RESET_RESUME quirk for Snapscan 1212Oliver Neukum1-0/+3
I got reports that some models of this old scanner need this when using runtime PM. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-07USB: core: drop pipe-type check from new control-message helpersJohan Hovold1-4/+1
The new control-message helpers include a pipe-type check which is almost completely redundant. Control messages are generally sent to the default pipe which always exists and is of the correct type since its endpoint representation is created by USB core as part of enumeration for all devices. There is currently only one instance of a driver in the tree which use a control endpoint other than endpoint 0 (and it does not use the new helpers). Drivers should be testing for the existence of their resources at probe rather than at runtime, but to catch drivers failing to do so USB core already does a sanity check on URB submission and triggers a WARN(). Having the same sanity check done in the helper only suppresses the warning without allowing us to find and fix the drivers. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20201204085110.20055-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04USB: core: return -EREMOTEIO on short usb_control_msg_recv()Johan Hovold1-1/+1
Return -EREMOTEIO instead of -EINVAL on short control transfers when using the new usb_control_msg_recv() helper. EINVAL is used to report invalid arguments (e.g. to the helper) and should not be used for unrelated errors. Many driver currently return -EIO on short control transfers but since host-controller drivers already use -EREMOTEIO for short transfers whenever the URB_SHORT_NOT_OK flag is set, let's use that here as well. This also allows usb_control_msg_recv() to eventually use URB_SHORT_NOT_OK without changing the return value again. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20201204085110.20055-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04USB: core: drop short-transfer check from usb_control_msg_send()Johan Hovold1-3/+2
A failure to send a complete control message is always an error so there's no need to check for short transfers in usb_control_msg_send(). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20201204085110.20055-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-30Merge 5.10-rc6 into usb-nextGreg Kroah-Hartman2-7/+17
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26USB: core: Constify static attribute_group structsRikard Falkeborn3-10/+10
These are never modified, so make them const to allow the compiler to put them in read-only memory. Done with the help of coccinelle. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201125162500.37228-2-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: core: Change %pK for __user pointers to %pxAlan Stern1-7/+7
Commit 2f964780c03b ("USB: core: replace %p with %pK") used the %pK format specifier for a bunch of __user pointers. But as the 'K' in the specifier indicates, it is meant for kernel pointers. The reason for the %pK specifier is to avoid leaks of kernel addresses, but when the pointer is to an address in userspace the security implications are minimal. In particular, no kernel information is leaked. This patch changes the __user %pK specifiers (used in a bunch of debugging output lines) to %px, which will always print the actual address with no mangling. (Notably, there is no printk format specifier particularly intended for __user pointers.) Fixes: 2f964780c03b ("USB: core: replace %p with %pK") CC: Vamsi Krishna Samavedam <vskrishn@codeaurora.org> CC: <stable@vger.kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201119170228.GB576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: core: Fix regression in Hercules audio cardAlan Stern1-0/+6
Commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") aimed to make the USB stack more reliable by detecting and skipping over endpoints that are duplicated between interfaces. This caused a regression for a Hercules audio card (reported as Bugzilla #208357), which contains such non-compliant duplications. Although the duplications are harmless, skipping the valid endpoints prevented the device from working. This patch fixes the regression by adding ENDPOINT_IGNORE quirks for the Hercules card, telling the kernel to ignore the invalid duplicate endpoints and thereby allowing the valid endpoints to be used as intended. Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") CC: <stable@vger.kernel.org> Reported-by: Alexander Chalikiopoulos <bugzilla.kernel.org@mrtoasted.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201119170040.GA576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO ↵penghao1-0/+4
built-in usb-audio card Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in usb-audio. when A630Z going into S3,the system immediately wakeup 7-8 seconds later by usb-audio disconnect interrupt to avoids the issue. eg dmesg: .... [ 626.974091 ] usb 7-1.1: USB disconnect, device number 3 .... .... [ 1774.486691] usb 7-1.1: new full-speed USB device number 5 using xhci_hcd [ 1774.947742] usb 7-1.1: New USB device found, idVendor=17ef, idProduct=a012, bcdDevice= 0.55 [ 1774.956588] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1774.964339] usb 7-1.1: Product: Thinkcentre TIO24Gen3 for USB-audio [ 1774.970999] usb 7-1.1: Manufacturer: Lenovo [ 1774.975447] usb 7-1.1: SerialNumber: 000000000000 [ 1775.048590] usb 7-1.1: 2:1: cannot get freq at ep 0x1 ....... Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. Signed-off-by: penghao <penghao@uniontech.com> Link: https://lore.kernel.org/r/20201118123039.11696-1-penghao@uniontech.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13usb: fix a few cases of -WfallthroughNick Desaulniers1-0/+1
The "fallthrough" pseudo-keyword was added as a portable way to denote intentional fallthrough. Clang will still warn on cases where there is a fallthrough to an immediate break. Add explicit breaks for those cases. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20201111014716.260633-1-ndesaulniers@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-08 23:46:44 +0300