summaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2021-07-21Revert "usb: renesas-xhci: Fix handling of unknown ROM state"Moritz Fischer1-8/+8
This reverts commit d143825baf15f204dac60acdf95e428182aa3374. Justin reports some of his systems now fail as result of this commit: xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2 xhci_hcd 0000:04:00.0: request_firmware failed: -2 xhci_hcd: probe of 0000:04:00.0 failed with error -2 The revert brings back the original issue the commit tried to solve but at least unbreaks existing systems relying on previous behavior. Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Justin Forbes <jmforbes@linuxtx.org> Reported-by: Justin Forbes <jmforbes@linuxtx.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-06Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds16-354/+559
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
2021-07-06Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-29Merge tag 'printk-for-5.14' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Add %pt[RT]s modifier to vsprintf(). It overrides ISO 8601 separator by using ' ' (space). It produces "YYYY-mm-dd HH:MM:SS" instead of "YYYY-mm-ddTHH:MM:SS". - Correctly parse long row of numbers by sscanf() when using the field width. Add extensive sscanf() selftest. - Generalize re-entrant CPU lock that has already been used to serialize dump_stack() output. It is part of the ongoing printk rework. It will allow to remove the obsoleted printk_safe buffers and introduce atomic consoles. - Some code clean up and sparse warning fixes. * tag 'printk-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix cpu lock ordering lib/dump_stack: move cpu lock to printk.c printk: Remove trailing semicolon in macros random32: Fix implicit truncation warning in prandom_seed_state() lib: test_scanf: Remove pointless use of type_min() with unsigned types selftests: lib: Add wrapper script for test_scanf lib: test_scanf: Add tests for sscanf number conversion lib: vsprintf: Fix handling of number field widths in vsscanf lib: vsprintf: scanf: Negative number must have field width > 1 usb: host: xhci-tegra: Switch to use %ptTs nilfs2: Switch to use %ptTs kdb: Switch to use %ptTs lib/vsprintf: Allow to override ISO 8601 date and time separator
2021-06-24usb: xhci-mtk: allow multiple Start-Split in a microframeChunfeng Yun2-20/+0
This patch is used to relax bandwidth schedule by allowing multiple Start-Split in the same microframe. Reviewed-and-Tested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623995165-25759-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-21xhci: remove redundant continue statementColin Ian King1-1/+0
The continue statement at the end of a for-loop has no effect, remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Continue has no effect") Cc: Mathias Nyman <mathias.nyman@intel.com> Link: https://lore.kernel.org/r/20210618090447.99114-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18sched: Unbreak wakeupsPeter Zijlstra1-2/+1
Remove broken task->state references and let wake_up_process() DTRT. The anti-pattern in these patches breaks the ordering of ->state vs COND as described in the comment near set_current_state() and can lead to missed wakeups: (OoO load, observes RUNNING)<-. for (;;) { | t->state = UNINTERRUPTIBLE; | smp_mb(); ,-----> | (observes !COND) | / if (COND) ---------' | COND = 1; break; `- if (t->state != RUNNING) wake_up_process(t); // not done schedule(); // forever waiting } t->state = TASK_RUNNING; Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210611082838.160855222@infradead.org
2021-06-18Revert "usb: host: xhci-plat: Create platform device for onboard hubs in ↵Greg Kroah-Hartman3-9/+0
probe()" This reverts commit c950686b382d0ea5234545fcce252c9e63d7b7a9 as the patch series is causing build issues in linux-next at the moment. Cc: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/YMuRcrE8xlWnFSWW@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: solve a double free problem while doing s4Zhangjiantao (Kirin, nanjing)1-0/+1
when system is doing s4, the process of xhci_resume may be as below: 1、xhci_mem_cleanup 2、xhci_init->xhci_mem_init->xhci_mem_cleanup(when memory is not enough). xhci_mem_cleanup will be executed twice when system is out of memory. xhci->port_caps is freed in xhci_mem_cleanup,but it isn't set to NULL. It will be freed twice when xhci_mem_cleanup is called the second time. We got following bug when system resumes from s4: kernel BUG at mm/slub.c:309! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP CPU: 0 PID: 5929 Tainted: G S W 5.4.96-arm64-desktop #1 pc : __slab_free+0x5c/0x424 lr : kfree+0x30c/0x32c Call trace: __slab_free+0x5c/0x424 kfree+0x30c/0x32c xhci_mem_cleanup+0x394/0x3cc xhci_mem_init+0x9ac/0x1070 xhci_init+0x8c/0x1d0 xhci_resume+0x1cc/0x5fc xhci_plat_resume+0x64/0x70 platform_pm_thaw+0x28/0x60 dpm_run_callback+0x54/0x24c device_resume+0xd0/0x200 async_resume+0x24/0x60 async_run_entry_fn+0x44/0x110 process_one_work+0x1f0/0x490 worker_thread+0x5c/0x450 kthread+0x158/0x160 ret_from_fork+0x10/0x24 Original patch that caused this issue was backported to 4.4 stable, so this should be backported to 4.4 stabe as well. Fixes: cf0ee7c60c89 ("xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com> Signed-off-by: Tao Xue <xuetao09@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warningMathias Nyman1-2/+7
Set the urb->actual_length to bytes successfully copied in case all bytes weren't copied from a temporary buffer to the URB sg list. Also print a debug message Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirkMathias Nyman3-1/+15
Save a bit of power by not interrupting so often by default if XHCI_AVOID_BEI quirk is set. In normal cases the xhci driver will only generate an interrupt on the last isochronous TRB of an URB. In a common UVC webcam usecase there are 32 TRBs per URB. if AVOID_BEI flag is set then xhci driver will force an interrupt every 8th isoc TRB to make sure the event ring doesn't get too full. This is however way too frequent in common single webcam use cases, causing 1000 interrupts/sec and thus poor powermanagement performance. Instead start with interrupting every 32 isoc TRB, and halve it in case event ring becomes half-full. Stop halving when reaching a rate of every 8th trb. This is a one way solution. If interrupt rate is increased it will stay high until driver is reloaded. The highest rate is the same as the old default rate. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIESMathias Nyman1-4/+0
We don't want those around confusing people. ERST_NUM_SEGS is used both when allocating event ring segments, and when allocating entries in the event ring segment table (erst). Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210617150354.1512157-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: host: u132-hcd: remove redundant continue statementsColin Ian King1-4/+2
There are continue statements at the end of loops that have no effect and are redundant. Remove them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Continue has no effect") Link: https://lore.kernel.org/r/20210617123826.13764-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: host: xhci-tegra: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-2/+1
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210616044519.2183826-3-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: host: xhci-tegra: Add missing of_node_put() in tegra_xusb_probe()Yang Yingliang1-0/+1
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. of_node_put() on it before exitting this function. Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210616044519.2183826-2-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: host: xhci-tegra: add missing put_device() in tegra_xusb_probe()Yang Yingliang1-4/+8
Goto put_padctl to put refcount of device on error in tegra_xusb_probe() Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210616044519.2183826-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17usb: renesas-xhci: Fix handling of unknown ROM stateMoritz Fischer1-8/+8
The ROM load sometimes seems to return an unknown status (RENESAS_ROM_STATUS_NO_RESULT) instead of success / fail. If the ROM load indeed failed this leads to failures when trying to communicate with the controller later on. Attempt to load firmware using RAM load in those cases. Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201") Cc: stable@vger.kernel.org Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210615153758.253572-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15usb: host: xhci-plat: Create platform device for onboard hubs in probe()Matthias Kaehlcke3-0/+9
Call onboard_hub_create/destroy_pdevs() from _probe()/_remove() to create/destroy platform devices for onboard USB hubs that may be connected to the root hub of the controller. These functions are a NOP unless CONFIG_USB_ONBOARD_HUB=y/m. Also add a field to struct xhci_hcd to keep track of the onboard hub platform devices that are owned by the xHCI. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210609150159.v12.4.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15usb: renesas-xhci: Replace BIT(15) with macroMoritz Fischer1-1/+1
Replace BIT(15) with RENESAS_ROM_STATUS_ROM_EXISTS. Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210614215614.240489-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14Merge tag 'for-5.14-usb' of ↵Greg Kroah-Hartman1-131/+482
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into usb-next Thierry writes: usb: tegra: Changes for v5.14-rc1 Implements proper suspend/resume for the XUSB controller found on recent Tegra chips. * tag 'for-5.14-usb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: usb: xhci: tegra: Enable ELPG for runtime/system PM usb: xhci: tegra: Unlink power domain devices phy: tegra: xusb: Add wake/sleepwalk for Tegra186 phy: tegra: xusb: Tegra210 host mode VBUS control phy: tegra: xusb: Add wake/sleepwalk for Tegra210 phy: tegra: xusb: Add sleepwalk and suspend/resume phy: tegra: xusb: Add Tegra210 lane_iddq operation phy: tegra: xusb: Rearrange UPHY init on Tegra210 phy: tegra: xusb: Move usb3 port init for Tegra210
2021-06-14Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman2-1/+7
We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14Merge tag 'v5.13-rc6' into tty-nextGreg Kroah-Hartman2-1/+7
We want the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11usb: xhci: tegra: Enable ELPG for runtime/system PMJC Kuo1-37/+370
This commit implements the complete programming sequence for ELPG entry and exit. 1. At ELPG entry, invokes tegra_xusb_padctl_enable_phy_sleepwalk() and tegra_xusb_padctl_enable_phy_wake() to configure XUSB PADCTL sleepwalk and wake detection circuits to maintain USB lines level and respond to wake events (wake-on-connect, wake-on-disconnect, device-initiated-wake). 2. At ELPG exit, invokes tegra_xusb_padctl_disable_phy_sleepwalk() and tegra_xusb_padctl_disable_phy_wake() to disarm sleepwalk and wake detection circuits. At runtime suspend, XUSB host controller can enter ELPG to reduce power consumption. When XUSB PADCTL wake detection circuit detects a wake event, an interrupt will be raised. xhci-tegra driver then will invoke pm_runtime_resume() for xhci-tegra. Runtime resume could also be triggered by protocol drivers, this is the host-initiated-wake event. At runtime resume, xhci-tegra driver brings XUSB host controller out of ELPG to handle the wake events. The same ELPG enter/exit procedure will be performed for system suspend/resume path so USB devices can remain connected across SC7. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11usb: xhci: tegra: Unlink power domain devicesJC Kuo1-94/+112
This commit unlinks xhci-tegra platform device with SS/host power domain devices. Reasons for this change is - at ELPG entry, PHY sleepwalk and wake configuration need to be done before powering down SS/host partitions, and PHY need be powered off after powering down SS/host partitions. Sequence looks like roughly below: tegra_xusb_enter_elpg() -> xhci_suspend() -> enable PHY sleepwalk and wake if needed -> power down SS/host partitions -> power down PHY If SS/host power domains are linked to xhci-tegra platform device, we are not able to perform the sequence like above. This commit introduces: 1. tegra_xusb_unpowergate_partitions() to power up SS and host partitions together. If SS/host power domain devices are available, it invokes pm_runtime_get_sync() to request power driver to power up partitions; If power domain devices are not available, tegra_powergate_sequence_power_up() will be used to power up partitions. 2. tegra_xusb_powergate_partitions() to power down SS and host partitions together. If SS/host power domain devices are available, it invokes pm_runtime_put_sync() to request power driver to power down partitions; If power domain devices are not available, tegra_powergate_power_off() will be used to power down partitions. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-10usb: ehci: do not initialise static variablesJason Wang1-2/+2
Global static variables dont need to be initialised manully. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20210609094726.62459-1-wangborong@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD RenoirMario Limonciello2-1/+7
The XHCI controller is required to enter D3hot rather than D3cold for AMD s2idle on this hardware generation. Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by host in resume and eventually this results in xhci resume failures during the s2idle wakeup. Link: https://lore.kernel.org/linux-usb/1612527609-7053-1-git-send-email-Prike.Liang@amd.com/ Suggested-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Cc: stable <stable@vger.kernel.org> # 5.11+ Link: https://lore.kernel.org/r/20210527154534.8900-1-mario.limonciello@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman1-7/+7
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman5-21/+32
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27USB: fotg210-hcd: remove dentry storage for debugfs fileGreg Kroah-Hartman2-5/+3
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Link: https://lore.kernel.org/r/20210525172534.848775-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-25xhci: Fix 5.12 regression of missing xHC cache clearing command after a StallMathias Nyman1-2/+6
If endpoints halts due to a stall then the dequeue pointer read from hardware may already be set ahead of the stalled TRB. After commit 674f8438c121 ("xhci: split handling halted endpoints into two steps") in 5.12 xhci driver won't issue a Set TR Dequeue if hardware dequeue pointer is already in the right place. Turns out the "Set TR Dequeue pointer" command is anyway needed as it in addition to moving the dequeue pointer also clears endpoint state and cache. Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: <stable@vger.kernel.org> # 5.12 Reported-by: Peter Ganzhorn <peter.ganzhorn@googlemail.com> Tested-by: Peter Ganzhorn <peter.ganzhorn@googlemail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210525074100.1154090-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-25xhci: fix giving back URB with incorrect status regression in 5.12Mathias Nyman1-5/+1
5.12 kernel changes how xhci handles cancelled URBs and halted endpoints. Among these changes cancelled and stalled URBs are no longer given back before they are cleared from xHC hardware cache. These changes unfortunately cleared the -EPIPE status of a stalled transfer in one case before giving bak the URB, causing a USB card reader to fail from working. Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: <stable@vger.kernel.org> # 5.12 Reported-by: Peter Ganzhorn <peter.ganzhorn@googlemail.com> Tested-by: Peter Ganzhorn <peter.ganzhorn@googlemail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210525074100.1154090-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21fsl-usb: add need_oc_pp_cycle flag for 85xx alsoGopalakrishnan Santhanam1-4/+4
Commit e6604a7fd71f9 ("EHCI: Quirk flag for port power handling on overcurrent.") activated the quirks handling (flag need_oc_pp_cycle) for Freescale 83xx based boards. Activate same for 85xx based boards as well. Cc: xe-linux-external@cisco.com Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Gopalakrishnan Santhanam <gsanthan@cisco.com> Signed-off-by: Daniel Walker <danielwa@cisco.com> Link: https://lore.kernel.org/r/20210513083225.68912-1-gsanthan@cisco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-17usb: host: xhci-tegra: Switch to use %ptTsAndy Shevchenko1-5/+1
Use %ptTs instead of open coded variant to print contents of time64_t type in human readable form. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210511153958.34527-4-andriy.shevchenko@linux.intel.com
2021-05-17Merge 5.13-rc2 into usb-nextGreg Kroah-Hartman5-14/+25
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_operations::chars_in_buffer return uintJiri Slaby1-2/+2
tty_operations::chars_in_buffer is another hook which is expected to return values >= 0. So make it explicit by the return type too -- use unsigned int. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_operations::write_room return uintJiri Slaby1-2/+2
Line disciplines expect a positive value or zero returned from tty->ops->write_room (invoked by tty_write_room). So make this assumption explicit by using unsigned int as a return value. Both of tty->ops->write_room and tty_write_room. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa Acked-by: David Sterba <dsterba@suse.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Chris Zankel <chris@zankel.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-23-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to corePeter Chen3-140/+5
It is needed at USB Certification test for Embedded Host 2.0, and the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification. Since other USB 2.0 capable host like XHCI also need it, so move it to HCD core. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1620452039-11694-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Add reset resume quirk for AMD xhci controller.Sandeep Singh1-1/+3
One of AMD xhci controller require reset on resume. Occasionally AMD xhci controller does not respond to Stop endpoint command. Once the issue happens controller goes into bad state and in that case controller needs to be reset. Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13usb: xhci: Increase timeout for HC haltMaximilian Luz1-2/+3
On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Do not use GFP_KERNEL in (potentially) atomic contextChristophe JAILLET1-3/+3
'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci: Fix giving back cancelled URBs even if halted endpoint can't resetMathias Nyman1-5/+11
Commit 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") in 5.12 changes how cancelled URBs are given back. To cancel a URB xhci driver needs to stop the endpoint first. To clear a halted endpoint xhci driver needs to reset the endpoint. In rare cases when an endpoint halt (error) races with a endpoint stop we need to clear the reset before removing, and giving back the cancelled URB. The above change in 5.12 takes care of this, but it also relies on the reset endpoint completion handler to give back the cancelled URBs. There are cases when driver refuses to queue reset endpoint commands, for example when a link suddenly goes to an inactive error state. In this case the cancelled URB is never given back. Fix this by giving back the URB in the stop endpoint if queuing a reset endpoint command fails. Fixes: 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") CC: <stable@vger.kernel.org> # 5.12 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCIAbhijeet Rao1-1/+3
In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake TCSS xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3cold and thus save energy. Cc: stable@vger.kernel.org Signed-off-by: Abhijeet Rao <abhijeet.rao@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: xhci-mtk: use first-fit for LS/FSChunfeng Yun1-0/+5
Use first-fit instead of best-fit for LS/FS devices under TT, we found that best-fit will consume more bandwidth for some cases. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210507021127.54717-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: xhci-mtk: remove unnecessary assignments in periodic TT schedulerIkjoon Jang1-23/+14
Remove unnecessary variables in check_sch_bw(). No functional changes, just for better readability. Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210507021127.54717-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: xhci-mtk: remove unnecessary setting of has_ippcChunfeng Yun1-2/+0
Due to @has_ippc's default value is 0, no need set it again if fail to get ippc base address Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210507021127.54717-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: xhci-mtk: use bitfield instead of boolChunfeng Yun1-4/+4
Use bitfield instead of bool in struct Refer to coding-style.rst 17) Using bool: "If a structure has many true/false values, consider consolidating them into a bitfield with 1 bit members, or using an appropriate fixed width type, such as u8." Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210507021127.54717-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10usb: fotg210-hcd: Fix an error messageChristophe JAILLET1-2/+2
'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-22usb: xhci-mtk: remove bus status checkChunfeng Yun1-41/+2
PM will take care of the status of child device, so no need check each port anymore. Suggested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618555706-6810-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: remove unused membersChunfeng Yun1-3/+0
Now some members about phys and wakeup are not used anymore, remove them. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14usb: xhci-mtk: use clock bulk to get clocksChunfeng Yun2-95/+24
Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1618031406-15347-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-03 11:22:54 +0300