summaryrefslogtreecommitdiff
path: root/drivers/vfio
AgeCommit message (Collapse)AuthorFilesLines
2020-06-05Merge tag 'powerpc-5.8-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ...
2020-06-02Merge branch 'v5.8/vfio/kirti-migration-fixes' into v5.8/vfio/nextAlex Williamson1-3/+4
2020-06-02vfio iommu: typecast correctionsKirti Wankhede1-2/+2
Fixes sparse warnings by adding '__user' in typecast for copy_[from,to]_user() Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-06-02vfio iommu: Use shift operation for 64-bit integer divisionKirti Wankhede1-1/+2
Fixes compilation error with ARCH=i386. Error fixed by this commit: ld: drivers/vfio/vfio_iommu_type1.o: in function `vfio_dma_populate_bitmap': >> vfio_iommu_type1.c:(.text+0x666): undefined reference to `__udivdi3' Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-30Merge branch 'qiushi-wu-mdev-ref-v1' into v5.8/vfio/nextAlex Williamson1-1/+1
2020-05-30vfio/mdev: Fix reference count leak in add_mdev_supported_typeQiushi Wu1-1/+1
kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Thus, replace kfree() by kobject_put() to fix this issue. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 7b96953bc640 ("vfio: Mediated device Core driver") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio: Selective dirty page tracking if IOMMU backed device pins pagesKirti Wankhede2-10/+106
Added a check such that only singleton IOMMU groups can pin pages. >From the point when vendor driver pins any pages, consider IOMMU group dirty page scope to be limited to pinned pages. To optimize to avoid walking list often, added flag pinned_page_dirty_scope to indicate if all of the vfio_groups for each vfio_domain in the domain_list dirty page scope is limited to pinned pages. This flag is updated on first pinned pages request for that IOMMU group and on attaching/detaching group. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio iommu: Add migration capability to report supported featuresKirti Wankhede1-1/+22
Added migration capability in IOMMU info chain. User application should check IOMMU info chain for migration capability to use dirty page tracking feature provided by kernel module. User application must check page sizes supported and maximum dirty bitmap size returned by this capability structure for ioctls used to get dirty bitmap. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio iommu: Update UNMAP_DMA ioctl to get dirty bitmap before unmapKirti Wankhede1-11/+50
DMA mapped pages, including those pinned by mdev vendor drivers, might get unpinned and unmapped while migration is active and device is still running. For example, in pre-copy phase while guest driver could access those pages, host device or vendor driver can dirty these mapped pages. Such pages should be marked dirty so as to maintain memory consistency for a user making use of dirty page tracking. To get bitmap during unmap, user should allocate memory for bitmap, set it all zeros, set size of allocated memory, set page size to be considered for bitmap and set flag VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio iommu: Implementation of ioctl for dirty pages trackingKirti Wankhede1-6/+308
VFIO_IOMMU_DIRTY_PAGES ioctl performs three operations: - Start dirty pages tracking while migration is active - Stop dirty pages tracking. - Get dirty pages bitmap. Its user space application's responsibility to copy content of dirty pages from source to destination during migration. To prevent DoS attack, memory for bitmap is allocated per vfio_dma structure. Bitmap size is calculated considering smallest supported page size. Bitmap is allocated for all vfio_dmas when dirty logging is enabled Bitmap is populated for already pinned pages when bitmap is allocated for a vfio_dma with the smallest supported page size. Update bitmap from pinning functions when tracking is enabled. When user application queries bitmap, check if requested page size is same as page size used to populated bitmap. If it is equal, copy bitmap, but if not equal, return error. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Fixed error reported by build bot by changing pgsize type from uint64_t to size_t. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio iommu: Cache pgsize_bitmap in struct vfio_iommuKirti Wankhede1-39/+49
Calculate and cache pgsize_bitmap when iommu->domain_list is updated and iommu->external_domain is set for mdev device. Add iommu->lock protection when cached pgsize_bitmap is accessed. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-29vfio iommu: Remove atomicity of ref_count of pinned pagesKirti Wankhede1-4/+5
vfio_pfn.ref_count is always updated while holding iommu->lock, using atomic variable is overkill. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-26Merge branches 'v5.8/vfio/alex-block-mmio-v3', 'v5.8/vfio/alex-zero-cap-v2' ↵Alex Williamson6-42/+450
and 'v5.8/vfio/qian-leak-fixes' into v5.8/vfio/next
2020-05-26vfio/pci: fix memory leaks of eventfd ctxQian Cai1-0/+4
Finished a qemu-kvm (-device vfio-pci,host=0001:01:00.0) triggers a few memory leaks after a while because vfio_pci_set_ctx_trigger_single() calls eventfd_ctx_fdget() without the matching eventfd_ctx_put() later. Fix it by calling eventfd_ctx_put() for those memory in vfio_pci_release() before vfio_device_release(). unreferenced object 0xebff008981cc2b00 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994816 (age 9796.310s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 unreferenced object 0x29ff008981cc4180 (size 128): comm "qemu-kvm", pid 4043, jiffies 4294994818 (age 9796.290s) hex dump (first 32 bytes): 01 00 00 00 6b 6b 6b 6b 00 00 00 00 ad 4e ad de ....kkkk.....N.. ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........ backtrace: [<00000000917e8f8d>] slab_post_alloc_hook+0x74/0x9c [<00000000df0f2aa2>] kmem_cache_alloc_trace+0x2b4/0x3d4 [<000000005fcec025>] do_eventfd+0x54/0x1ac [<0000000082791a69>] __arm64_sys_eventfd2+0x34/0x44 [<00000000b819758c>] do_el0_svc+0x128/0x1dc [<00000000b244e810>] el0_sync_handler+0xd0/0x268 [<00000000d495ef94>] el0_sync+0x164/0x180 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-18vfio/pci: fix memory leaks in alloc_perm_bits()Qian Cai1-2/+5
vfio_pci_disable() calls vfio_config_free() but forgets to call free_perm_bits() resulting in memory leaks, unreferenced object 0xc000000c4db2dee0 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 00 ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<00000000a6a4552d>] alloc_perm_bits+0x58/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] init_pci_cap_msi_perm at drivers/vfio/pci/vfio_pci_config.c:1125 (inlined by) vfio_msi_cap_len at drivers/vfio/pci/vfio_pci_config.c:1180 (inlined by) vfio_cap_len at drivers/vfio/pci/vfio_pci_config.c:1241 (inlined by) vfio_cap_init at drivers/vfio/pci/vfio_pci_config.c:1468 (inlined by) vfio_config_init at drivers/vfio/pci/vfio_pci_config.c:1707 [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278 unreferenced object 0xc000000c4db2e330 (size 16): comm "qemu-kvm", pid 4305, jiffies 4295020272 (age 3463.780s) hex dump (first 16 bytes): 00 ff ff 00 ff ff ff ff ff ff ff ff ff ff 00 00 ................ backtrace: [<000000004c71914f>] alloc_perm_bits+0x44/0xe0 [vfio_pci] [<00000000ac990549>] vfio_config_init+0xdf0/0x11b0 [vfio_pci] [<000000006db873a1>] vfio_pci_open+0x234/0x700 [vfio_pci] [<00000000630e1906>] vfio_group_fops_unl_ioctl+0x8e0/0xb84 [vfio] [<000000009e34c54f>] ksys_ioctl+0xd8/0x130 [<000000006577923d>] sys_ioctl+0x28/0x40 [<000000006d7b1cf2>] system_call_exception+0x114/0x1e0 [<0000000008ea7dd5>] system_call_common+0xf0/0x278 Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver") Signed-off-by: Qian Cai <cai@lca.pw> [aw: rolled in follow-up patch] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-18vfio-pci: Mask cap zeroAlex Williamson1-1/+6
The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map. Seen on an NVIDIA Tesla T4. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-18vfio-pci: Invalidate mmaps and block MMIO access on disabled memoryAlex Williamson5-43/+330
Accessing the disabled memory space of a PCI device would typically result in a master abort response on conventional PCI, or an unsupported request on PCI express. The user would generally see these as a -1 response for the read return data and the write would be silently discarded, possibly with an uncorrected, non-fatal AER error triggered on the host. Some systems however take it upon themselves to bring down the entire system when they see something that might indicate a loss of data, such as this discarded write to a disabled memory space. To avoid this, we want to try to block the user from accessing memory spaces while they're disabled. We start with a semaphore around the memory enable bit, where writers modify the memory enable state and must be serialized, while readers make use of the memory region and can access in parallel. Writers include both direct manipulation via the command register, as well as any reset path where the internal mechanics of the reset may both explicitly and implicitly disable memory access, and manipulation of the MSI-X configuration, where the MSI-X vector table resides in MMIO space of the device. Readers include the read and write file ops to access the vfio device fd offsets as well as memory mapped access. In the latter case, we make use of our new vma list support to zap, or invalidate, those memory mappings in order to force them to be faulted back in on access. Our semaphore usage will stall user access to MMIO spaces across internal operations like reset, but the user might experience new behavior when trying to access the MMIO space while disabled via the PCI command register. Access via read or write while disabled will return -EIO and access via memory maps will result in a SIGBUS. This is expected to be compatible with known use cases and potentially provides better error handling capabilities than present in the hardware, while avoiding the more readily accessible and severe platform error responses that might otherwise occur. Fixes: CVE-2020-12888 Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-18vfio-pci: Fault mmaps to enable vma trackingAlex Williamson2-2/+81
Rather than calling remap_pfn_range() when a region is mmap'd, setup a vm_ops handler to support dynamic faulting of the range on access. This allows us to manage a list of vmas actively mapping the area that we can later use to invalidate those mappings. The open callback invalidates the vma range so that all tracking is inserted in the fault handler and removed in the close handler. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-18vfio/type1: Support faulting PFNMAP vmasAlex Williamson1-3/+33
With conversion to follow_pfn(), DMA mapping a PFNMAP range depends on the range being faulted into the vma. Add support to manually provide that, in the same way as done on KVM with hva_to_pfn_remapped(). Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-05-11drivers/powerpc: Replace _ALIGN_UP() by ALIGN()Christophe Leroy1-1/+1
_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/a5945463f86c984151962a475a3ee56a2893e85d.1587407777.git.christophe.leroy@c-s.fr
2020-04-23vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()Sean Christopherson1-2/+2
Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that vma->vm_pgoff holds the base PFN of the VMA. This fixes a bug where attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of memory calculates garbage for the PFN. Hilariously, this only got detected because the first "PFN" calculated by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys() uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin() because the translation "failed". PFN 0 is now unconditionally reserved on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn() to return true and in turns results in vaddr_get_pfn() returning success for PFN 0. Eventually the bogus calculation runs into PFNs that aren't reserved and leads to failure in vfio_pin_map_dma(). The subsequent call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs. WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ... CPU: 8 PID: 5130 Comm: sgx Tainted: G W 5.6.0-rc5-705d787c7fee-vfio+ #3 Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018 RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1] Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200 RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2 R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000 R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08 FS: 00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: vfio_remove_dma+0x17/0x70 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4c/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f15d04c75d7 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-20vfio: avoid possible overflow in vfio_iommu_type1_pin_pagesYan Zhao1-1/+1
add parentheses to avoid possible vaddr overflow. Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-20vfio: checking of validity of user vaddr in vfio_dma_rwYan Zhao1-2/+2
instead of calling __copy_to/from_user(), use copy_to_from_user() to ensure vaddr range is a valid user address range before accessing them. Fixes: 8d46c0cca5f4 ("vfio: introduce vfio_dma_rw to read/write a range of IOVAs") Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-01vfio: Ignore -ENODEV when getting MSI cookieAndre Przywara1-1/+1
When we try to get an MSI cookie for a VFIO device, that can fail if CONFIG_IOMMU_DMA is not set. In this case iommu_get_msi_cookie() returns -ENODEV, and that should not be fatal. Ignore that case and proceed with the initialisation. This fixes VFIO with a platform device on the Calxeda Midway (no MSIs). Fixes: f6810c15cf973f ("iommu/arm-smmu: Clean up early-probing workarounds") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-04-01vfio-pci/nvlink2: Allow fallback to ibm,mmio-atsd[0]Sam Bobroff1-2/+8
Older versions of skiboot only provide a single value in the device tree property "ibm,mmio-atsd", even when multiple Address Translation Shoot Down (ATSD) registers are present. This prevents NVLink2 devices (other than the first) from being used with vfio-pci because vfio-pci expects to be able to assign a dedicated ATSD register to each NVLink2 device. However, ATSD registers can be shared among devices. This change allows vfio-pci to fall back to sharing the register at index 0 if necessary. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24Merge branches 'v5.7/vfio/alex-sriov-v3' and 'v5.7/vfio/yan-dma-rw-v4' into ↵Alex Williamson4-28/+646
v5.7/vfio/next
2020-03-24vfio/pci: Cleanup .probe() exit pathsAlex Williamson1-29/+25
The cleanup is getting a tad long. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Remove dev_fmt definitionAlex Williamson1-1/+0
It currently results in messages like: "vfio-pci 0000:03:00.0: vfio_pci: ..." Which is quite a bit redundant. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Add sriov_configure supportAlex Williamson2-11/+97
With the VF Token interface we can now expect that a vfio userspace driver must be in collaboration with the PF driver, an unwitting userspace driver will not be able to get past the GET_DEVICE_FD step in accessing the device. We can now move on to actually allowing SR-IOV to be enabled by vfio-pci on the PF. Support for this is not enabled by default in this commit, but it does provide a module option for this to be enabled (enable_sriov=1). Enabling VFs is rather straightforward, except we don't want to risk that a VF might get autoprobed and bound to other drivers, so a bus notifier is used to "capture" VFs to vfio-pci using the driver_override support. We assume any later action to bind the device to other drivers is condoned by the system admin and allow it with a log warning. vfio-pci will disable SR-IOV on a PF before releasing the device, allowing a VF driver to be assured other drivers cannot take over the PF and that any other userspace driver must know the shared VF token. This support also does not provide a mechanism for the PF userspace driver itself to manipulate SR-IOV through the vfio API. With this patch SR-IOV can only be enabled via the host sysfs interface and the PF driver user cannot create or remove VFs. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: Introduce VFIO_DEVICE_FEATURE ioctl and first userAlex Williamson1-0/+59
The VFIO_DEVICE_FEATURE ioctl is meant to be a general purpose, device agnostic ioctl for setting, retrieving, and probing device features. This implementation provides a 16-bit field for specifying a feature index, where the data porition of the ioctl is determined by the semantics for the given feature. Additional flag bits indicate the direction and nature of the operation; SET indicates user data is provided into the device feature, GET indicates the device feature is written out into user data. The PROBE flag augments determining whether the given feature is supported, and if provided, whether the given operation on the feature is supported. The first user of this ioctl is for setting the vfio-pci VF token, where the user provides a shared secret key (UUID) on a SR-IOV PF device, which users must provide when opening associated VF devices. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Introduce VF tokenAlex Williamson2-1/+205
If we enable SR-IOV on a vfio-pci owned PF, the resulting VFs are not fully isolated from the PF. The PF can always cause a denial of service to the VF, even if by simply resetting itself. The degree to which a PF can access the data passed through a VF or interfere with its operation is dependent on a given SR-IOV implementation. Therefore we want to avoid a scenario where an existing vfio-pci based userspace driver might assume the PF driver is trusted, for example assigning a PF to one VM and VF to another with some expectation of isolation. IOMMU grouping could be a solution to this, but imposes an unnecessarily strong relationship between PF and VF drivers if they need to operate with the same IOMMU context. Instead we introduce a "VF token", which is essentially just a shared secret between PF and VF drivers, implemented as a UUID. The VF token can be set by a vfio-pci based PF driver and must be known by the vfio-pci based VF driver in order to gain access to the device. This allows the degree to which this VF token is considered secret to be determined by the applications and environment. For example a VM might generate a random UUID known only internally to the hypervisor while a userspace networking appliance might use a shared, or even well know, UUID among the application drivers. To incorporate this VF token, the VFIO_GROUP_GET_DEVICE_FD interface is extended to accept key=value pairs in addition to the device name. This allows us to most easily deny user access to the device without risk that existing userspace drivers assume region offsets, IRQs, and other device features, leading to more elaborate error paths. The format of these options are expected to take the form: "$DEVICE_NAME $OPTION1=$VALUE1 $OPTION2=$VALUE2" Where the device name is always provided first for compatibility and additional options are specified in a space separated list. The relation between and requirements for the additional options will be vfio bus driver dependent, however unknown or unused option within this schema should return error. This allow for future use of unknown options as well as a positive indication to the user that an option is used. An example VF token option would take this form: "0000:03:00.0 vf_token=2ab74924-c335-45f4-9b16-8569e5b08258" When accessing a VF where the PF is making use of vfio-pci, the user MUST provide the current vf_token. When accessing a PF, the user MUST provide the current vf_token IF there are active VF users or MAY provide a vf_token in order to set the current VF token when no VF users are active. The former requirement assures VF users that an unassociated driver cannot usurp the PF device. These semantics also imply that a VF token MUST be set by a PF driver before VF drivers can access their device, the default token is random and mechanisms to read the token are not provided in order to protect the VF token of previous users. Use of the vf_token option outside of these cases will return an error, as discussed above. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio/pci: Implement match opsAlex Williamson1-0/+8
This currently serves the same purpose as the default implementation but will be expanded for additional functionality. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: Include optional device match in vfio_device_ops callbacksAlex Williamson1-4/+16
Allow bus drivers to provide their own callback to match a device to the user provided string. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: avoid inefficient operations on VFIO group in vfio_pin/unpin_pagesYan Zhao1-0/+91
vfio_group_pin_pages() and vfio_group_unpin_pages() are introduced to avoid inefficient search/check/ref/deref opertions associated with VFIO group as those in each calling into vfio_pin_pages() and vfio_unpin_pages(). VFIO group is taken as arg directly. The callers combine search/check/ref/deref operations associated with VFIO group by calling vfio_group_get_external_user()/vfio_group_get_external_user_from_dev() beforehand, and vfio_group_put_external_user() afterwards. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: introduce vfio_dma_rw to read/write a range of IOVAsYan Zhao2-0/+125
vfio_dma_rw will read/write a range of user space memory pointed to by IOVA into/from a kernel buffer without enforcing pinning the user space memory. TODO: mark the IOVAs to user space memory dirty if they are written in vfio_dma_rw(). Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: allow external user to get vfio group from deviceYan Zhao1-0/+38
external user calls vfio_group_get_external_user_from_dev() with a device pointer to get the VFIO group associated with this device. The VFIO group is checked to be vialbe and have IOMMU set. Then container user counter is increased and VFIO group reference is hold to prevent the VFIO group from disposal before external user exits. when the external user finishes using of the VFIO group, it calls vfio_group_put_external_user() to dereference the VFIO group and the container user counter. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-03-24vfio: platform: Switch to platform_get_irq_optional()Eric Auger1-1/+1
Since commit 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()"), platform_get_irq() calls dev_err() on an error. As we enumerate all interrupts until platform_get_irq() fails, we now systematically get a message such as: "vfio-platform fff51000.ethernet: IRQ index 3 not found" which is a false positive. Let's use platform_get_irq_optional() instead. Signed-off-by: Eric Auger <eric.auger@redhat.com> Cc: stable@vger.kernel.org # v5.3+ Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-02-04Merge tag 'vfio-v5.6-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds4-7/+9
Pull VFIO updates from Alex Williamson: - Fix nvlink error path (Alexey Kardashevskiy) - Update nvlink and spapr to use mmgrab() (Julia Lawall) - Update static declaration (Ben Dooks) - Annotate __iomem to fix sparse warnings (Ben Dooks) * tag 'vfio-v5.6-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: fix __iomem in vfio_platform_amdxgbe.c vfio/mdev: make create attribute static vfio/spapr_tce: use mmgrab vfio: vfio_pci_nvlink2: use mmgrab vfio/spapr/nvlink2: Skip unpinning pages on error exit
2020-01-31mm, tree-wide: rename put_user_page*() to unpin_user_page*()John Hubbard1-1/+1
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31vfio, mm: pin_user_pages (FOLL_PIN) and put_user_page() conversionJohn Hubbard1-4/+3
1. Change vfio from get_user_pages_remote(), to pin_user_pages_remote(). 2. Because all FOLL_PIN-acquired pages must be released via put_user_page(), also convert the put_page() call over to put_user_pages_dirty_lock(). Note that this effectively changes the code's behavior in vfio_iommu_type1.c: put_pfn(): it now ultimately calls set_page_dirty_lock(), instead of set_page_dirty(). This is probably more accurate. As Christoph Hellwig put it, "set_page_dirty() is only safe if we are dealing with a file backed page where we have reference on the inode it hangs off." [1] [1] https://lore.kernel.org/r/20190723153640.GB720@lst.de Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31vfio: fix FOLL_LONGTERM use, simplify get_user_pages_remote() callJohn Hubbard1-25/+5
Update VFIO to take advantage of the recently loosened restriction on FOLL_LONGTERM with get_user_pages_remote(). Also, now it is possible to fix a bug: the VFIO caller is logically a FOLL_LONGTERM user, but it wasn't setting FOLL_LONGTERM. Also, remove an unnessary pair of calls that were releasing and reacquiring the mmap_sem. There is no need to avoid holding mmap_sem just in order to call page_to_pfn(). Also, now that the the DAX check ("if a VMA is DAX, don't allow long term pinning") is in the internals of get_user_pages_remote() and __gup_longterm_locked(), there's no need for it at the VFIO call site. So remove it. Link: http://lkml.kernel.org/r/20200107224558.2362728-8-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Jason Gunthorpe <jgg@ziepe.ca> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-09vfio: platform: fix __iomem in vfio_platform_amdxgbe.cBen Dooks (Codethink)1-2/+2
The ioaddr should have __iomem marker on it, so add that to fix the following sparse warnings: drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:33:44: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: expected void const volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:34:33: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:44:44: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: warning: incorrect type in argument 2 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: expected void volatile [noderef] <asn:2> *addr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:45:33: got void * drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:69:41: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:71:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:76:49: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:85:37: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:87:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:90:30: got void [noderef] <asn:2> *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: warning: incorrect type in argument 1 (different address spaces) drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: expected void *ioaddr drivers/vfio/platform/reset/vfio_platform_amdxgbe.c:93:30: got void [noderef] <asn:2> *ioaddr Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Acked-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-09vfio/mdev: make create attribute staticBen Dooks (Codethink)1-1/+1
The create attribute is not exported, so make it static to avoid the following sparse warning: drivers/vfio/mdev/mdev_sysfs.c:77:1: warning: symbol 'mdev_type_attr_create' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-07vfio/spapr_tce: use mmgrabJulia Lawall1-1/+1
Mmgrab was introduced in commit f1f1007644ff ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-07vfio: vfio_pci_nvlink2: use mmgrabJulia Lawall1-1/+1
Mmgrab was introduced in commit f1f1007644ff ("mm: add new mmgrab() helper") and most of the kernel was updated to use it. Update a remaining file. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression e; @@ - atomic_inc(&e->mm_count); + mmgrab(e); </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-06vfio/spapr/nvlink2: Skip unpinning pages on error exitAlexey Kardashevskiy1-2/+4
The nvlink2 subdriver for IBM Witherspoon machines preregisters GPU memory in the IOMMI API so KVM TCE code can map this memory for DMA as well. This is done by mm_iommu_newdev() called from vfio_pci_nvgpu_regops::mmap. In an unlikely event of failure the data->mem remains NULL and since mm_iommu_put() (which unregisters the region and unpins memory if that was regular memory) does not expect mem=NULL, it should not be called. This adds a check to only call mm_iommu_put() for a valid data->mem. Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig5-7/+7
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-08Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-23/+5
Pull VFIO updates from Alex Williamson: - Remove hugepage checks for reserved pfns (Ben Luo) - Fix irq-bypass unregister ordering (Jiang Yi) * tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: call irq_bypass_unregister_producer() before freeing irq vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()
2019-12-04Merge branch 'v5.5/vfio/jiang-yi-irq-bypass-unregister-v1' into v5.5/vfio/nextAlex Williamson1-1/+1
2019-12-04Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds3-21/+26
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...