summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-07-16Merge branch 'vhost-net' of ↵David S. Miller1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-07-16PCI: fall back to original BIOS BAR addressesBjorn Helgaas1-0/+32
If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew <nitr0@seti.kr.ua> Tested-by: Andrew <nitr0@seti.kr.ua> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-16rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()Stephen Boyd1-5/+5
The rt2x00dev->intf_work workqueue is never initialized when a driver is probed for a non-existent device (in this case rt2500usb). On such a path we call rt2x00lib_remove_dev() to free any resources initialized during the probe before we use INIT_WORK to initialize the workqueue. This causes lockdep to get confused since the lock used in the workqueue hasn't been initialized yet but is now being acquired during cancel_work_sync() called by rt2x00lib_remove_dev(). Fix this by initializing the workqueue first before we attempt to probe the device. This should make lockdep happy and avoid breaking any assumptions about how the library cleans up after a probe fails. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 Call Trace: [<ffffffff8105fe59>] register_lock_class+0x152/0x31f [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111 [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4 [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81492aef>] ? _raw_spin_unlock_irqrestore+0x33/0x41 [<ffffffff810628d5>] lock_acquire+0xd1/0xf7 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f136>] cancel_work_sync+0xb/0xd [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52 [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb] [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb] [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136 [<ffffffff812ea167>] __driver_attach+0x4a/0x66 [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66 [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89 [<ffffffff812e9efd>] driver_attach+0x19/0x1b [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204 [<ffffffff812ea41b>] driver_register+0x98/0x109 [<ffffffff813465dd>] usb_register_driver+0xb2/0x173 [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb] [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb] [<ffffffff81000203>] do_one_initcall+0x6d/0x17a [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0 [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-16Merge branch 'for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: w90p910_ts - fix call to setup_timer() Input: synaptics - fix wrong dimensions check Input: i8042 - mark stubs in i8042.h "static inline"
2010-07-16vhost: avoid pr_err on condition guest can triggerMichael S. Tsirkin1-4/+4
Guest can trigger packet truncation by posting a very short buffer and disabling buffer merging. Convert pr_err to pr_debug to avoid log from filling up when this happens. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-16Input: w90p910_ts - fix call to setup_timer()Wan ZongShun1-1/+1
No need to take address, w90p910_ts is already a pointer. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-16drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asicsAlex Deucher10-5/+16
The asics in question have the following requirements with regard to their gart setups: 1. The GART aperture size has to be in the form of 2^X bytes, where X is from 25 to 31 2. The GART aperture MC base has to be aligned to a boundary equal to the size of the aperture. 3. The GART page table has to be aligned to the boundary equal to the size of the table. 4. The GART page table size is: table_entry_size * (aperture_size / page_size) 5. The GART page table has to be allocated in non-paged, non-cached, contiguous system memory. This patch takes care 2. The rest should already be handled properly. This fixes a regression noticed by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-15vhost-net: avoid flush under lockMichael S. Tsirkin1-0/+5
We flush under vq mutex when changing backends. This creates a deadlock as workqueue being flushed needs this lock as well. https://bugzilla.redhat.com/show_bug.cgi?id=612421 Drop the vq mutex before flush: we have the device mutex which is sufficient to prevent another ioctl from touching the vq. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-15Merge branch 'merge' of ↵Linus Torvalds1-22/+0
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/fsl-booke: Fix address issue when using relocatable kernels powerpc/cpm1: Mark micropatch code/data static and __init powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinations powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)
2010-07-14hostap_pci: set dev->base_addr during probeJohn W. Linville1-0/+1
"hostap: Protect against initialization interrupt" (which reinstated "wireless: hostap, fix oops due to early probing interrupt") reintroduced Bug 16111. This is because hostap_pci wasn't setting dev->base_addr, which is now checked in prism2_interrupt. As a result, initialization was failing for PCI-based hostap devices. This corrects that oversight. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-14Input: synaptics - fix wrong dimensions checkTakashi Iwai1-0/+1
The commit 83ba9ea8a04b72dfee2515428c15e7414ba4fc61 ommitted the return line for the old synaptics model accidentally. This resulted in a wrong check, namely, the dimensions are checked for the old devices that don't support the query properly. This patch adds the return line back. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-07-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds4-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: input: i8042 - add runtime check in x86's i8042_platform_init Revert "Input: fixup X86_MRST selects" Revert "Input: do not force selecting i8042 on Moorestown" x86, mrst: Add i8042_detect API for Moorestwon platform x86: Add i8042 pre-detection hook to x86_platform_ops x86, platform: Export x86_platform to modules
2010-07-14drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740Alex Deucher1-2/+9
Check ulBootUpMemoryClock on AMD IGPs. Fix regression noticed by Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-13drivers/sbus: Remove unnecessary casts of private_dataJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-13axnet_cs: use spin_lock_irqsave in ax_interruptKen Kawasaki1-3/+4
Use spin_lock_irqsave instead of spin_lock in ax_interrupt because the interrupt handler can also be invoked from ei_watchdog. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-13drm/radeon/kms: fix legacy tv-out pal modeAlex Deucher1-2/+2
fixes fdo bug 26915 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-13Merge branch 'master' of ↵David S. Miller2-2/+17
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-13Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds16-163/+167
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
2010-07-13Merge branch 'for-linus' of ↵Linus Torvalds7-5/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
2010-07-12r8169: incorrect identifier for a 8168dpFrancois Romieu1-1/+1
Merge error. See CFG_METHOD_8 (0x3c800000 + 0x00300000) since version 8.002.00 of Realtek's driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-12HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott1-3/+10
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-12V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host driversLaurent Pinchart7-110/+89
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-12Merge branch 'hwmon-for-linus' of ↵Linus Torvalds4-12/+60
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
2010-07-12Merge branch 'i2c-for-linus' of ↵Linus Torvalds2-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-12HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards2-0/+3
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway2-0/+2
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)Anton Vorontsov1-22/+0
spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe <christophe.leroy@c-s.fr> Reported-by: Tony Breeds <tony@bakeyournoodle.com> Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck1-2/+2
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-10i2c: Fix probability checkJean Delvare1-4/+3
The new unified probing function differs from the original code, and the preliminary test whether probing is possible must be updated accordingly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09hwmon: Fix autoloading of fschmd on recent Fujitsu machinesJean Delvare1-6/+2
Fujitsu slightly changed the DMI strings in their recent machines, (for example the D2778) and this breaks the automatic loading of the needed fschmd driver. Being more tolerant on string comparison fixes the issue. This closes bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Sergey Spiridonov <sena@hurd.homeunix.org> Cc: Hans de Goede <hdegoede@redhat.com>
2010-07-09hwmon: (coretemp) Properly label the sensorsJean Delvare1-1/+5
Don't assume that CPU entry number and core ID always match. It worked in the simple cases (single CPU, no HT) but fails on multi-CPU systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (coretemp) Skip duplicate CPU entriesJean Delvare1-1/+25
On hyper-threaded CPUs, each core appears twice in the CPU list. Skip the second entry to avoid duplicate sensors. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Cc: stable@kernel.org
2010-07-09hwmon: (it87) Fix in7 on IT8720FJean Delvare1-0/+22
The IT8720F has no VIN7 pin, so VCCH should always be routed internally to VIN7 with an internal divider. Curiously, there still is a configuration bit to control this, which means it can be set incorrectly. And even more curiously, many boards out there are improperly configured, even though the IT8720F datasheet claims that the internal routing of VCCH to VIN7 is the default setting. So we force the internal routing in this case. It turns out that all boards with the wrong setting are from Gigabyte, so I suspect a BIOS bug. But it's easy enough to workaround in the driver, so let's do it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org> Cc: stable@kernel.org
2010-07-09hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisionsAndreas Herrmann1-4/+6
Reported temperature for ASB1 CPUs is too high. Add ASB1 CPU revisions (these are also non-desktop variants) to the list of CPUs for which the temperature fixup is not required. Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle) Current kernel reports $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +74.0 C Core0 Temp: +70.0 C Core1 Temp: +69.0 C Core1 Temp: +70.0 C With this patch I have $ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +54.0 C Core0 Temp: +51.0 C Core1 Temp: +48.0 C Core1 Temp: +49.0 C Cc: stable@kernel.org [.32.x .33.x, .34.x] Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-07-09IB/qib: Use request_firmware() to load SD7220 firmwareBen Hutchings4-1100/+46
Extract the microcode for the QLogic QLE7220 series IB HCA and use the kernel microcode request facility to load the microcode. This supports Debian Linux's requirements to separate microcode which doesn't have open source code available from the device driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-07-08V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereferencePawel Osciak1-0/+3
Calling g_fmt before s_fmt resulted in a NULL pointer dereference as no default formats were being selected on probe. Reported-by: Németh Márton <nm127@freemail.hu> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RESLaurent Pinchart1-2/+2
Issuing a GET_MIN request on the power line frequency control times out on at least the Apple iSight. As the UVC specification doesn't list GET_MIN/MAX/RES as supported on that control, remove them from the uvc_ctrls array. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank ↵Ian Armstrong1-0/+3
screen Add a short delay when stopping the decoder, allowing it to settle and preventing some unexpected interaction with other firmware commands. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Tested-by: Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tunerAndy Walls1-0/+15
Hauppauge EEPROM tuner code 168 has recently shown up on HVR-1600 TV capture cards supported by the cx18 driver. This change allows analog tuner type autodetection to succeed for these cards. Information for decoding tuner code 168 was provided by Hauppauge. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tunerAndy Walls2-0/+17
Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargsVaibhav Hiremath1-2/+2
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contigVaibhav Hiremath2-32/+16
Actually OMAP doesn't support scatter-gather DMA for Display subsystem but due to legacy coding it has been overlooked till now. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changesVaibhav Hiremath2-17/+20
Changes - - Kconfig option dependancy changed to ARCH_OMAP2/3 from ARCH_OMAP24XX/34XX - There are some moments of function from omap_dss_device to omap_dss_driver. Incorporated changes for the same. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Muralidharan Karicheri <mkaricheri@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-08Merge branch 'for-linus' of ↵Linus Torvalds15-66/+148
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix world-writable child interface control sysfs attributes IB/qib: Clean up properly if qib_init() fails IB/qib: Completion queue callback needs to be single threaded IB/qib: Update 7322 serdes tables IB/qib: Clear 6120 hardware error register IB/qib: Clear eager buffer memory for each new process IB/qib: Mask hardware error during link reset IB/qib: Don't mark VL15 bufs as WC to avoid a rare 7322 chip problem RDMA/cxgb4: Derive smac_idx from port viid RDMA/cxgb4: Avoid false GTS CIDX_INC overflows RDMA/cxgb4: Don't call abort_connection() for active connect failures RDMA/cxgb4: Use the DMA state API instead of the pci equivalents
2010-07-08Merge branches 'cxgb4', 'ipoib' and 'qib' into for-nextRoland Dreier9-41/+106
2010-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds23-159/+232
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (35 commits) NET: SB1250: Initialize .owner vxge: show startup message with KERN_INFO ll_temac: Fix missing iounmaps bridge: Clear IPCB before possible entry into IP stack bridge br_multicast: BUG: unable to handle kernel NULL pointer dereference net: Fix definition of netif_vdbg() when VERBOSE_DEBUG is defined net/ne: fix memory leak in ne_drv_probe() xfrm: fix xfrm by MARK logic virtio_net: fix oom handling on tx virtio_net: do not reschedule rx refill forever s2io: resolve statistics issues linux/net.h: fix kernel-doc warnings net: decreasing real_num_tx_queues needs to flush qdisc sched: qdisc_reset_all_tx is calling qdisc_reset without qdisc_lock qlge: fix a eeh handler to not add a pending timer qlge: Replacing add_timer() to mod_timer() usbnet: Set parent device early for netdev_printk() net: Revert "rndis_host: Poll status channel before control channel" netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT drivers: bluetooth: bluecard_cs.c: Fixed include error, changed to linux/io.h ...
2010-07-08input: i8042 - add runtime check in x86's i8042_platform_initFeng Tang1-0/+10
Then it will first check x86_platforms's i8042 detection result, then go on with normal probe. Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <4c34dd482753bb8f1@agluck-desktop.sc.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-08Revert "Input: fixup X86_MRST selects"Feng Tang2-2/+2
This reverts commit 0b28bac5aef7bd1ab213723df031e61db9ff151a. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-5-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-08Revert "Input: do not force selecting i8042 on Moorestown"Feng Tang2-2/+2
This reverts commit 685afae02557a178185a4be36f58332976e79f63. After adding x86_platform's detection for i8042 controller, we don't need the force dependency on !X86_MRST any more Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <1278342202-10973-4-git-send-email-feng.tang@intel.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-08NET: SB1250: Initialize .ownerRalf Baechle1-0/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/sb1250-mac.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 06:25:28 +0300