Age | Commit message (Collapse) | Author | Files | Lines |
|
https://github.com/openbmc/linux into openbmc/dev-5.15-intel-bump_v5.15.36
Signed-off-by: Sujoy Ray <sujoy.ray@intel.com>
|
|
Add support to deselect the mux when there is a timeout.
The mux idle_state settings will be configured on startup. In case of
MCTP it is MUX_IDLE_DISCONNECT. But when there is a timeout, mux ends
up in connected position and the devices behind the mux will appear under
different muxes connected to the same bus. This change fix the same.
Signed-off-by: Arun P. Mohanan <arun.p.m@linux.intel.com>
|
|
This is the 5.15.36 stable release
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
commit 8c235cc25087495c4288d94f547e9d3061004991 upstream.
Use the spi_mem_default_supports_op() core helper in order to take into
account the buswidth specified by the user in device tree.
Cc: <stable@vger.kernel.org>
Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220406133604.455356-1-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream.
In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.
Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04ebaa1cfddae5f240cc7404f009133bb0389a47 upstream.
When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.
Scaling is represented as:
scale 0 - 1 (2^(5*0)) = 2^0
scale 1 - 32 (2^(5 *1))= 2^5
scale 2 - 1024 (2^(5 *2)) =2^10
scale 3 - 32768 (2^(5 *3)) =2^15
scale 4 - 1048576 (2^(5 *4)) = 2^20
scale 5 - 33554432 (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.
Replace the u16 type with the u32 type and allow corrected LTR
representation.
Cc: stable@vger.kernel.org
Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06fb4ecfeac7e00d6704fa5ed19299f2fefb3cc9 upstream.
Commit 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members
before initialization") attempted to fix a race condition that lead to a
NULL pointer, but in the process caused a regression for _AEI/_EVT
declared GPIOs.
This manifests in messages showing deferred probing while trying to
allocate IRQs like so:
amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x0000 to IRQ, err -517
amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x002C to IRQ, err -517
amd_gpio AMDI0030:00: Failed to translate GPIO pin 0x003D to IRQ, err -517
[ .. more of the same .. ]
The code for walking _AEI doesn't handle deferred probing and so this
leads to non-functional GPIO interrupts.
Fix this issue by moving the call to `acpi_gpiochip_request_interrupts`
to occur after gc->irc.initialized is set.
Fixes: 5467801f1fcb ("gpio: Restrict usage of GPIO chip irq members before initialization")
Link: https://lore.kernel.org/linux-gpio/BL1PR12MB51577A77F000A008AA694675E2EF9@BL1PR12MB5157.namprd12.prod.outlook.com/
Link: https://bugzilla.suse.com/show_bug.cgi?id=1198697
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215850
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1979
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1976
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Shreeya Patel <shreeya.patel@collabora.com>
Tested-By: Samuel Čavoj <samuel@cavoj.net>
Tested-By: lukeluk498@gmail.com Link:
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Shreeya Patel <shreeya.patel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3d0b93d92a2790337aa9d18cb332d02356a24126 ]
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1.
Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.
Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f18c0782b99e26121efa93d20b76c19e17aa1dd ]
The panel has a prepare call which is before video starts, and an
enable call which is after.
The Toshiba bridge should be configured before video, so move
the relevant power and initialisation calls to prepare.
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-3-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f92055ae0acb035891e988ce345d6b81a0316423 ]
If a call to rpi_touchscreen_i2c_write from rpi_touchscreen_probe
fails before mipi_dsi_device_register_full is called, then
in trying to log the error message if uses ts->dsi->dev when
it is still NULL.
Use ts->i2c->dev instead, which is initialised earlier in probe.
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415162513.42190-2-stefan.wahren@i2se.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit faad6cebded8e0fd902b672f220449b93db479eb ]
sr_ioctl.c uses this pattern:
result = sr_do_ioctl(cd, &cgc);
to-user = buffer[];
kfree(buffer);
return result;
Use of a buffer without checking leaks information. Check result and jump
over the use of buffer if there is an error.
result = sr_do_ioctl(cd, &cgc);
if (result)
goto err;
to-user = buffer[];
err:
kfree(buffer);
return result;
Additionally, initialize the buffer to zero.
This problem can be seen in the 2.4.0 kernel.
Link: https://lore.kernel.org/r/20220411174756.2418435-1-trix@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81022a170462d38ea10612cb67e8e2c529d58abe ]
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes: f77621cc640a ("Input: omap-keypad - dynamically handle register offsets")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cbe6c3a8f8f4315b96e46e1a1c70393c06d95a4c upstream.
This will reset deeply on freeze and thaw instead of suspend and
resume and prevent null pointer dereferences of the uninitialized ring
0 buffer while thawing.
The impact is an indefinitely hanging kernel. You can't switch
consoles after this and the only possible user interaction is SysRq.
BUG: kernel NULL pointer dereference
RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic]
aq_vec_init+0x85/0xe0 [atlantic]
aq_nic_init+0xf7/0x1d0 [atlantic]
atl_resume_common+0x4f/0x100 [atlantic]
pci_pm_thaw+0x42/0xa0
resolves in aq_ring.o to
```
0000000000000ae0 <aq_ring_rx_fill>:
{
/* ... */
baf: 48 8b 43 08 mov 0x8(%rbx),%rax
buff->flags = 0U; /* buff is NULL */
```
The bug has been present since the introduction of the new pm code in
8aaa112a57c1 ("net: atlantic: refactoring pm logic") and was hidden
until 8ce84271697a ("net: atlantic: changes for multi-TC support"),
which refactored the aq_vec_{free,alloc} functions into
aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The
original functions just always reinitialized the buffers on S3/S4. If
the interface is down before freezing, the bug does not occur. It does
not matter, whether the initrd contains and loads the module before
thawing.
So the fix is to invert the boolean parameter deep in all pm function
calls, which was clearly intended to be set like that.
First report was on Github [1], which you have to guess from the
resume logs in the posted dmesg snippet. Recently I posted one on
Bugzilla [2], since I did not have an AQC device so far.
#regzbot introduced: 8ce84271697a
#regzbot from: koo5 <kolman.jindrich@gmail.com>
#regzbot monitor: https://github.com/Aquantia/AQtion/issues/32
Fixes: 8aaa112a57c1 ("net: atlantic: refactoring pm logic")
Link: https://github.com/Aquantia/AQtion/issues/32 [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2]
Cc: stable@vger.kernel.org
Reported-by: koo5 <kolman.jindrich@gmail.com>
Signed-off-by: Manuel Ullmann <labre@posteo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3ae97f4c87d9570e7e9a3e3324c443757f6e29a upstream.
Commit b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script") broke
uart rx on imx5 when using sdma firmware from older Freescale 2.6.35
kernel. In this case reading addr->uartXX_2_mcu_addr was going out of
bounds of the firmware memory and corrupting the uart script addresses.
Simply adding a bounds check before accessing addr->uartXX_2_mcu_addr
does not work as the uartXX_2_mcu_addr members are now beyond the size
of the older firmware and the uart addresses would never be populated
in that case. There are other ways to fix this but overall the logic
seems clearer to me to revert the uartXX_2_mcu_ram_addr structure
entries back to uartXX_2_mcu_addr, change the newer entries to
uartXX_2_mcu_rom_addr and update the logic accordingly.
I have tested this patch on:
1. An i.MX53 system with sdma firmware from Freescale 2.6.35 kernel.
Without this patch uart rx is broken in this scenario, with the
patch uart rx is restored.
2. An i.MX6D system with no external sdma firmware. uart is okay with
or without this patch.
3. An i.MX8MM system using current sdma-imx7d.bin firmware from
linux-firmware. uart is okay with or without this patch and I
confirmed the rom version of the uart script is being used which was
the intention and reason for commit b98ce2f4e32b ("dmaengine:
imx-sdma: add uart rom script") in the first place.
Fixes: b98ce2f4e32b ("dmaengine: imx-sdma: add uart rom script")
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220410223118.15086-1-kgroeneveld@lenbrook.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 206680c4e46b62fd8909385e0874a36952595b85 upstream.
The bug is here:
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
The list iterator 'desc' will point to a bogus position containing
HEAD if the list is empty or no element is found. To avoid dev_dbg()
prints a invalid address, use a new variable 'iter' as the list
iterator, while use the origin variable 'desc' as a dedicated
pointer to point to the found element.
Cc: stable@vger.kernel.org
Fixes: 82e2424635f4c ("dmaengine: xdmac: fix print warning on dma_addr_t variable")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327061154.4867-1-xiam0nd.tong@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aafa9f958342db36c17ac2a7f1b841032c96feb4 upstream.
Before detecting the cable type on the dma bar, the driver should check
whether the 'bmdma_addr' is zero, which means the adapter does not
support DMA, otherwise we will get the following error:
[ 5.146634] Bad IO access at port 0x1 (return inb(port))
[ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60
[ 5.150856] RIP: 0010:ioread8+0x4a/0x60
[ 5.160238] Call Trace:
[ 5.160470] <TASK>
[ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell]
[ 5.161728] ata_eh_recover+0x3520/0x6cc0
[ 5.168075] ata_do_eh+0x49/0x3c0
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2932d1f6f055b2af2114c7e64a26dc1b5593d0c upstream.
Currently, the error count is read wrongly from the status register. Read
the count from the proper error count register (ERRCNT).
[ bp: Massage. ]
Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220414102813.4468-1-shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 66dd346b84d79fde20832ed691a54f4881eac20d ]
Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a98a945b80f8684121d477ae68ebc01da953da1f ]
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00ff400e6deee00f7b15e200205b2708b63b8cf6 ]
Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.
The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 857b06527f707f5df634b854898a191b5c1d0272 ]
We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is
created. Then in qedi_set_path we kick off the offload work. If userspace
times out the connection and calls ep_disconnect, qedi will only flush the
offload work if the qedi_ep state has transitioned away from
EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned
state and will leave the offload work running, and we will free the qedi_ep
from under it.
This patch just has us init the work when we create the ep, then always
flush it.
Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44ac97109e42f87b1a34954704b81b6c8eca80c4 ]
If a offload driver doesn't use the xmit workqueue, then when we are doing
ep_disconnect libiscsi can still inject PDUs to the driver. This adds a
check for if the connection is bound before trying to inject PDUs.
Link: https://lore.kernel.org/r/20220408001314.5014-9-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bd856256f8c03e329f8ff36d8c8efcb111fe6df ]
Move the tx and rx suspend fields into one flags field.
Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c6ae371b8a1ffba1fc415989fd581ebf841ed0a ]
We can't release the endpoint ID until all references to the endpoint have
been dropped or it could be allocated while in use. This has us use an idr
instead of looping over all conns to find a free ID and then free the ID
when all references have been dropped instead of when the device is only
deleted.
Link: https://lore.kernel.org/r/20220408001314.5014-4-michael.christie@oracle.com
Tested-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ad7f18cd82cee8e773d40cc7a1465a526f2615c ]
commit 4298388574da ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.
For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.
This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 047ae665577776b7feb11bd4f81f46627cff95e7 ]
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Besides, since mdp5_plane_reset() is void type, so we should better
set `plane-state` to NULL after releasing it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481055/
Link: https://lore.kernel.org/r/tencent_8E2A1C78140EE1784AB2FF4B2088CC0AB908@qq.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a7eb80d170c28be2928433702256fe2a0bd1e0f ]
Both of of_get_parent() and of_parse_phandle() return node pointer with
refcount incremented, use of_node_put() on it to decrease refcount
when done.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6fb3a5868b2117611f41e421e10e6a8c2a13039a ]
Fix:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
^~~~
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant
case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: netdev@vger.kernel.org
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Ykx0iRlvtBnKqtbG@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbc2b1764734857d68425468ffa8486e97ab89df ]
Fix:
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’:
././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \
declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Shayne Chen <shayne.chen@mediatek.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220405151517.29753-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d3a6c37d50d5a0504c126c932cc749e6dd9c78f ]
UBSAN warnings are observed on atlantic driver:
[ 294.432996] UBSAN: array-index-out-of-bounds in /build/linux-Qow4fL/linux-5.15.0/drivers/net/ethernet/aquantia/atlantic/aq_nic.c:484:48
[ 294.433695] index 8 is out of range for type 'aq_vec_s *[8]'
The ring is dereferenced right before breaking out the loop, to prevent
that from happening, only use the index in the loop to fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1958770
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20220408022204.16815-1-kai.heng.feng@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cea5560bf656b84f9ed01c0cc829d4eecd0640b ]
When kmalloc and dst_cache_init failed,
should return ENOMEM rather than ENOBUFS.
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f75e582b0c3ee8f0bddc2248cc8b9175f29c5937 ]
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/tencent_B3E19486FF39415098B572B7397C2936C309@qq.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
negative
[ Upstream commit 0284d4d1be753f648f28b77bdfbe6a959212af5c ]
Eliminate the follow smatch warnings:
drivers/platform/x86/samsung-laptop.c:1124 kbd_led_set() warn: unsigned
'value' is never less than zero.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220322061830.105579-1-jiapeng.chong@linux.alibaba.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1da1052ffad63aa5181b69f20a6952e31f339c2 ]
This reverts following commit 69125b4b9440 ("reset: tegra-bpmp: Revert
Handle errors in BPMP response").
The Tegra194 HDA reset failure is fixed by commit d278dc9151a0 ("ALSA:
hda/tegra: Fix Tegra194 HDA reset failure"). The temporary revert of
original commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP
response") can be removed now.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1641995806-15245-1-git-send-email-spujar@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da18980a855edf44270f05455e0ec3f2472f64cc ]
Deasserting the reset is vital, therefore bail out in case of error.
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/b2131908-0110-006b-862f-080517f3e2d8@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1cd8e751d96c43ece3f6842ac2244a37d9332c3a ]
If the device shows up as read-only configuration, skip the clearing of the
state as the context must be preserved for device re-enable after being
disabled.
Fixes: 0dcfe41e9a4c ("dmanegine: idxd: cleanup all device related bits after disabling device")
Reported-by: Tony Zhu <tony.zhu@intel.com>
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971479479.2200566.13980022473526292759.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 505a2d1032ae656b0a8c736be110255503941cde ]
Block wq_max_transfer_size_store() when the device is configured as
read-only and not configurable.
Fixes: d7aad5550eca ("dmaengine: idxd: add support for configurable max wq xfer size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971488154.2200913.10706665404118545941.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 66903461ffed0b66fc3e0200082d4e09365aacdc ]
Block wq_max_batch_size_store() when the device is configured as read-only
and not configurable.
Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Reported-by: Bernice Zhang <bernice.zhang@intel.com>
Tested-by: Bernice Zhang <bernice.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/164971493551.2201159.1942042593642155209.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 234901de2bc6847eaa0aeb4aba62c31ffb8d3ad6 ]
The init_systime() may be invoked in atomic state. We have observed the
following call trace when running "phc_ctl /dev/ptp0 set" on a Intel
Agilex board.
BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Preemption disabled at:
[<ffff80000892ef78>] stmmac_set_time+0x34/0x8c
CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567
Hardware name: SoCFPGA Agilex SoCDK (DT)
Call trace:
dump_backtrace.part.0+0xc4/0xd0
show_stack+0x24/0x40
dump_stack_lvl+0x7c/0xa0
dump_stack+0x18/0x34
__might_resched+0x154/0x1c0
__might_sleep+0x58/0x90
init_systime+0x78/0x120
stmmac_set_time+0x64/0x8c
ptp_clock_settime+0x60/0x9c
pc_clock_settime+0x6c/0xc0
__arm64_sys_clock_settime+0x88/0xf0
invoke_syscall+0x5c/0x130
el0_svc_common.constprop.0+0x4c/0x100
do_el0_svc+0x7c/0xa0
el0_svc+0x58/0xcc
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x18c/0x190
So we should use readl_poll_timeout_atomic() here instead of
readl_poll_timeout().
Also adjust the delay time to 10us to fix a "__bad_udelay" build error
reported by "kernel test robot <lkp@intel.com>". I have tested this on
Intel Agilex and NXP S32G boards, there is no delay needed at all.
So the 10us delay should be long enough for most cases.
Fixes: ff8ed737860e ("net: stmmac: use readl_poll_timeout() function in init_systime()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
intel_psr2_config_valid() fails
[ Upstream commit bb02330408a7bde33b5f46aa14fd5d7bfe6093b7 ]
If any of the PSR2 checks after intel_psr2_sel_fetch_config_valid()
fails, enable_psr2_sel_fetch will be kept enabled causing problems
in the functions that only checks for it and not for has_psr2.
So here moving the check that do not depend on enable_psr2_sel_fetch
and for the remaning ones jumping to a section that unset
enable_psr2_sel_fetch in case of failure to support PSR2.
Fixes: 6e43e276b8c9 ("drm/i915: Initial implementation of PSR2 selective fetch")
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414151118.21980-1-jose.souza@intel.com
(cherry picked from commit 554ae8dce1268789e72767a67f0635cb743b3cea)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4cf35a2b627a020fe1a6b6fc7a6a12394644e474 ]
When the user runs:
bridge link set dev $br_port mcast_flood on
this command should affect not only L2 multicast, but also IPv4 and IPv6
multicast.
In the Ocelot switch, unknown multicast gets flooded according to
different PGIDs according to its type, and PGID_MC only handles L2
multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their
default value of 0, unknown IP multicast traffic is never flooded.
Fixes: 421741ea5672 ("net: mscc: ocelot: offload bridge port flags to device")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220415151950.219660-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da367ac74aecb59b62a9538009d4aee8ce4bdfb3 ]
The displayed list of Ethernet devices in make menuconfig
has gotten out of order. This is mostly due to changes in vendor
names etc, but also because of new Microsoft entry in wrong place.
This restores so that the display is in order even if the names
of the sub directories are not.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 822f52e7efdc88fccffb9fbf6250a4b7666a0b0f ]
Some mainboard/CPU combinations, in particular, Alder Lake-S with a
W680 mainboard, have shown problems (system hangs usually, no kernel
logs) with suspend/resume when PCIe PTM is enabled and active. In some
cases, it could be reproduced when removing the igc module.
The best we can do is to stop PTM dialogs from the downstream/device
side before the interface is brought down. PCIe PTM will be re-enabled
when the interface is being brought up.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c80a29f0fe9b6f5457e0788e27d1110577eba99b ]
Replace usleep_range() method with udelay() method to allow atomic contexts
in low-level MDIO access functions.
The following issue can be seen by doing the following:
$ modprobe -r bonding
$ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0
$ ip link set bond0 up
$ ifenslave bond0 eth0 eth1
[ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002
[ 982.364431] INFO: lockdep is turned off.
[ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding]
[ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1
[ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017
[ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding]
[ 982.465622] Call Trace:
[ 982.468355] dump_stack+0x8e/0xd0
[ 982.472056] __schedule_bug.cold.60+0x3a/0x60
[ 982.476919] __schedule+0x147b/0x1bc0
[ 982.481007] ? firmware_map_remove+0x16b/0x16b
[ 982.485967] ? hrtimer_fixup_init+0x40/0x40
[ 982.490625] schedule+0xd9/0x250
[ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0
[ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130
[ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90
[ 982.511332] ? usleep_range+0x88/0x130
[ 982.515514] ? recalibrate_cpu_khz+0x10/0x10
[ 982.520279] ? ktime_get+0xab/0x1c0
[ 982.524175] ? usleep_range+0x88/0x130
[ 982.528355] usleep_range+0xdd/0x130
[ 982.532344] ? console_conditional_schedule+0x30/0x30
[ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc]
[ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc]
[ 982.548887] igc_phy_has_link+0xfa/0x260 [igc]
[ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc]
[ 982.558894] ? lock_acquire+0x34d/0x890
[ 982.563187] ? lock_downgrade+0x710/0x710
[ 982.567659] ? rcu_read_unlock+0x50/0x50
[ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc]
[ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc]
[ 982.584286] ? rcu_read_unlock+0x50/0x50
[ 982.588661] ? lock_release+0x591/0xb80
[ 982.592939] ? lock_release+0x591/0xb80
[ 982.597220] igc_has_link+0x113/0x330 [igc]
[ 982.601887] ? lock_downgrade+0x710/0x710
[ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc]
[ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding]
[ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding]
[ 982.623277] ? rcu_read_lock_held+0x62/0xc0
[ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0
[ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding]
[ 982.638738] ? lock_contended+0x880/0x880
[ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding]
[ 982.649336] ? lock_acquire+0x34d/0x890
[ 982.653615] ? lock_downgrade+0x710/0x710
[ 982.658089] ? debug_object_deactivate+0x221/0x340
[ 982.663436] ? rcu_read_unlock+0x50/0x50
[ 982.667811] ? debug_print_object+0x2b0/0x2b0
[ 982.672672] ? __switch_to_asm+0x41/0x70
[ 982.677049] ? __switch_to_asm+0x35/0x70
[ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40
[ 982.686288] ? trace_hardirqs_on+0x20/0x195
[ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40
[ 982.695818] process_one_work+0x8f0/0x1770
[ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320
[ 982.705443] ? debug_show_held_locks+0x50/0x50
[ 982.710403] worker_thread+0x87/0xb40
[ 982.714489] ? process_one_work+0x1770/0x1770
[ 982.719349] kthread+0x344/0x410
[ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0
[ 982.728975] ret_from_fork+0x3a/0x50
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 907862e9aef75bf89e2b265efcc58870be06081e ]
An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.
Fixes: c0071c7aa5fe ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1d388f216aeb41a5df518815ae559d14a6d438e ]
Since the conversion to spi-mem, the driver advertised support for
various operations that cqspi_set_protocol() was never expected to handle
correctly - in particuar all non-DTR operations with command or address
buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as
cqspi_set_protocol() returns -EINVAL.
In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that
support such operations. As a minimal fix that can be backported to stable
kernels, simply disallow the unsupported operations again to avoid this
issue.
Fixes: a314f6367787 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220406132832.199777-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 317c2045618cc1f8d38beb8c93a7bdb6ad8638c6 ]
After system resumes, the registers of nor controller are
initialized with default values. The nor controller will
not function properly.
To handle both issues above, we add mtk_nor_init() in
mtk_nor_resume after pm_runtime_force_resume().
Fixes: 3bfd9103c7af ("spi: spi-mtk-nor: Add power management support")
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220412115743.22641-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8fc5133d6d4da65cad6b73152fc714ad3d7f91c1 ]
On some arch (ie aarch64 iMX8MM) unaligned PCIe accesses are
not allowed and lead to a kernel Oops.
[ 1911.668835] Unable to handle kernel paging request at virtual address ffff80001bc00a8c
[ 1911.668841] Mem abort info:
[ 1911.668844] ESR = 0x96000061
[ 1911.668847] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1911.668850] SET = 0, FnV = 0
[ 1911.668852] EA = 0, S1PTW = 0
[ 1911.668853] Data abort info:
[ 1911.668855] ISV = 0, ISS = 0x00000061
[ 1911.668857] CM = 0, WnR = 1
[ 1911.668861] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000040ff4000
[ 1911.668864] [ffff80001bc00a8c] pgd=00000000bffff003, pud=00000000bfffe003, pmd=0068000018400705
[ 1911.668872] Internal error: Oops: 96000061 [#1] PREEMPT SMP
...
The llp register present in the channel group registers is not
aligned on 64bit.
Fix unaligned 64bit access using two 32bit accesses
Fixes: 04e0a39fc10f ("dmaengine: dw-edma: Add writeq() and readq() for 64 bits architectures")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220225120252.309404-1-herve.codina@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mtk_uart_apdma_alloc_chan_resources
[ Upstream commit 545b2baac89b859180e51215468c05d85ea8465a ]
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
We fix it:
1) Replacing it with pm_runtime_resume_and_get to keep usage counter
balanced.
2) Add putting operation before returning error.
Fixes:9135408c3ace4 ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220319022142.142709-1-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7104b9cb35a33ad803a1adbbfa50569b008faf15 ]
of_parse_phandle() returns NULL on errors, rather than error
pointers. Using NULL check on grp_np to fix this.
Fixes: d078cd1b4185 ("dmaengine: imx-sdma: Add imx6sx platform support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308064952.15743-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|