summaryrefslogtreecommitdiff
path: root/fs/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2021-04-23netfs: Provide readahead and readpage netfs helpersDavid Howells1-0/+1
Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2021-03-08s390,alpha: make TMPFS_INODE64 available againHeiko Carstens1-1/+1
Both s390 and alpha have been switched to 64-bit ino_t with commit 96c0a6a72d18 ("s390,alpha: switch to 64-bit ino_t"). Therefore enable TMPFS_INODE64 for both architectures again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Link: https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/ Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-02-21Merge tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds1-0/+4
Pull nfsd updates from Chuck Lever: - Update NFSv2 and NFSv3 XDR decoding functions - Further improve support for re-exporting NFS mounts - Convert NFSD stats to per-CPU counters - Add batch Receive posting to the server's RPC/RDMA transport * tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits) nfsd: skip some unnecessary stats in the v4 case nfs: use change attribute for NFS re-exports NFSv4_2: SSC helper should use its own config. nfsd: cstate->session->se_client -> cstate->clp nfsd: simplify nfsd4_check_open_reclaim nfsd: remove unused set_client argument nfsd: find_cpntf_state cleanup nfsd: refactor set_client nfsd: rename lookup_clientid->set_client nfsd: simplify nfsd_renew nfsd: simplify process_lock nfsd4: simplify process_lookup1 SUNRPC: Correct a comment svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom() svcrdma: Reduce Receive doorbell rate svcrdma: Deprecate stat variables that are no longer used svcrdma: Restore read and write stats svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter svcrdma: Convert rdma_stat_recv to a per-CPU counter svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up() ...
2021-02-10tmpfs: disallow CONFIG_TMPFS_INODE64 on alphaSeth Forshee1-1/+1
As with s390, alpha is a 64-bit architecture with a 32-bit ino_t. With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and display "inode64" in the mount options, whereas passing "inode64" in the mount options will fail. This leads to erroneous behaviours such as this: # mkdir mnt # mount -t tmpfs nodev mnt # mount -o remount,rw mnt mount: /home/ubuntu/mnt: mount point not mounted or bad option. Prevent CONFIG_TMPFS_INODE64 from being selected on alpha. Link: https://lkml.kernel.org/r/20210208215726.608197-1-seth.forshee@canonical.com Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb") Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Chris Down <chris@chrisdown.name> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-10tmpfs: disallow CONFIG_TMPFS_INODE64 on s390Seth Forshee1-1/+1
Currently there is an assumption in tmpfs that 64-bit architectures also have a 64-bit ino_t. This is not true on s390 which has a 32-bit ino_t. With CONFIG_TMPFS_INODE64=y tmpfs mounts will get 64-bit inode numbers and display "inode64" in the mount options, but passing the "inode64" mount option will fail. This leads to the following behavior: # mkdir mnt # mount -t tmpfs nodev mnt # mount -o remount,rw mnt mount: /home/ubuntu/mnt: mount point not mounted or bad option. As mount sees "inode64" in the mount options and thus passes it in the options for the remount. So prevent CONFIG_TMPFS_INODE64 from being selected on s390. Link: https://lkml.kernel.org/r/20210205230620.518245-1-seth.forshee@canonical.com Fixes: ea3271f7196c ("tmpfs: support 64-bit inums per-sb") Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Chris Down <chris@chrisdown.name> Cc: Hugh Dickins <hughd@google.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: <stable@vger.kernel.org> [5.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-28NFSv4_2: SSC helper should use its own config.Dai Ngo1-0/+4
Currently NFSv4_2 SSC helper, nfs_ssc, incorrectly uses GRACE_PERIOD as its config. Fix by adding new config NFS_V4_2_SSC_HELPER which depends on NFS_V4_2 and is automatically selected when NFSD_V4 is enabled. Also removed the file name from a comment in nfs_ssc.c. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-08-07tmpfs: support 64-bit inums per-sbChris Down1-0/+21
The default is still set to inode32 for backwards compatibility, but system administrators can opt in to the new 64-bit inode numbers by either: 1. Passing inode64 on the command line when mounting, or 2. Configuring the kernel with CONFIG_TMPFS_INODE64=y The inode64 and inode32 names are used based on existing precedent from XFS. [hughd@google.com: Kconfig fixes] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008011928010.13320@eggly.anvils Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/8b23758d0c66b5e2263e08baf9c4b6a7565cbd8f.1594661218.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-2/+2
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-21docs: filesystems: fix renamed referencesMauro Carvalho Chehab1-1/+1
Some filesystem references got broken by a previous patch series I submitted. Address those. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: David Sterba <dsterba@suse.com> # fs/affs/Kconfig Link: https://lore.kernel.org/r/57318c53008dbda7f6f4a5a9e5787f4d37e8565a.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-03-06exfat: add Kconfig and MakefileNamjae Jeon1-1/+2
This adds the Kconfig and Makefile for exfat. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-10Merge tag 'zonefs-5.6-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
2020-02-09fs: Add VirtualBox guest shared folder (vboxsf) supportHans de Goede1-0/+1
VirtualBox hosts can share folders with guests, this commit adds a VFS driver implementing the Linux-guest side of this, allowing folders exported by the host to be mounted under Linux. This driver depends on the guest <-> host IPC functions exported by the vboxguest driver. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07fs: New zonefs file systemDamien Le Moal1-0/+1
zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with zoned block device support (e.g. f2fs), zonefs does not hide the sequential write constraint of zoned block devices to the user. Files representing sequential write zones of the device must be written sequentially starting from the end of the file (append only writes). As such, zonefs is in essence closer to a raw block device access interface than to a full featured POSIX file system. The goal of zonefs is to simplify the implementation of zoned block device support in applications by replacing raw block device file accesses with a richer file API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application as well as introducing support for different application programming languages. Zonefs on-disk metadata is reduced to an immutable super block to persistently store a magic number and optional feature flags and values. On mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration and populates the mount point with a static file tree solely based on this information. E.g. file sizes come from the device zone type and write pointer offset managed by the device itself. The zone files created on mount have the following characteristics. 1) Files representing zones of the same type are grouped together under a common sub-directory: * For conventional zones, the sub-directory "cnv" is used. * For sequential write zones, the sub-directory "seq" is used. These two directories are the only directories that exist in zonefs. Users cannot create other directories and cannot rename nor delete the "cnv" and "seq" sub-directories. 2) The name of zone files is the number of the file within the zone type sub-directory, in order of increasing zone start sector. 3) The size of conventional zone files is fixed to the device zone size. Conventional zone files cannot be truncated. 4) The size of sequential zone files represent the file's zone write pointer position relative to the zone start sector. Truncating these files is allowed only down to 0, in which case, the zone is reset to rewind the zone write pointer position to the start of the zone, or up to the zone size, in which case the file's zone is transitioned to the FULL state (finish zone operation). 5) All read and write operations to files are not allowed beyond the file zone size. Any access exceeding the zone size is failed with the -EFBIG error. 6) Creating, deleting, renaming or modifying any attribute of files and sub-directories is not allowed. 7) There are no restrictions on the type of read and write operations that can be issued to conventional zone files. Buffered, direct and mmap read & write operations are accepted. For sequential zone files, there are no restrictions on read operations, but all write operations must be direct IO append writes. mmap write of sequential files is not allowed. Several optional features of zonefs can be enabled at format time. * Conventional zone aggregation: ranges of contiguous conventional zones can be aggregated into a single larger file instead of the default one file per zone. * File ownership: The owner UID and GID of zone files is by default 0 (root) but can be changed to any valid UID/GID. * File access permissions: the default 640 access permissions can be changed. The mkzonefs tool is used to format zoned block devices for use with zonefs. This tool is available on Github at: git@github.com:damien-lemoal/zonefs-tools.git. zonefs-tools also includes a test suite which can be run against any zoned block device, including null_blk block device created with zoned mode. Example: the following formats a 15TB host-managed SMR HDD with 256 MB zones with the conventional zones aggregation feature enabled. $ sudo mkzonefs -o aggr_cnv /dev/sdX $ sudo mount -t zonefs /dev/sdX /mnt $ ls -l /mnt/ total 0 dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq The size of the zone files sub-directories indicate the number of files existing for each type of zones. In this example, there is only one conventional zone file (all conventional zones are aggregated under a single file). $ ls -l /mnt/cnv total 137101312 -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 This aggregated conventional zone file can be used as a regular file. $ sudo mkfs.ext4 /mnt/cnv/0 $ sudo mount -o loop /mnt/cnv/0 /data The "seq" sub-directory grouping files for sequential write zones has in this example 55356 zones. $ ls -lv /mnt/seq total 14511243264 -rw-r----- 1 root root 0 Nov 25 13:23 0 -rw-r----- 1 root root 0 Nov 25 13:23 1 -rw-r----- 1 root root 0 Nov 25 13:23 2 ... -rw-r----- 1 root root 0 Nov 25 13:23 55354 -rw-r----- 1 root root 0 Nov 25 13:23 55355 For sequential write zone files, the file size changes as data is appended at the end of the file, similarly to any regular file system. $ dd if=/dev/zero of=/mnt/seq/0 bs=4K count=1 conv=notrunc oflag=direct 1+0 records in 1+0 records out 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000452219 s, 9.1 MB/s $ ls -l /mnt/seq/0 -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 The written file can be truncated to the zone size, preventing any further write operation. $ truncate -s 268435456 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 Truncation to 0 size allows freeing the file zone storage space and restart append-writes to the file. $ truncate -s 0 /mnt/seq/0 $ ls -l /mnt/seq/0 -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 Since files are statically mapped to zones on the disk, the number of blocks of a file as reported by stat() and fstat() indicates the size of the file zone. $ stat /mnt/seq/0 File: /mnt/seq/0 Size: 0 Blocks: 524288 IO Block: 4096 regular empty file Device: 870h/2160d Inode: 50431 Links: 1 Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2019-11-25 13:23:57.048971997 +0900 Modify: 2019-11-25 13:52:25.553805765 +0900 Change: 2019-11-25 13:52:25.553805765 +0900 Birth: - The number of blocks of the file ("Blocks") in units of 512B blocks gives the maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone size in this example. Of note is that the "IO block" field always indicates the minimum IO size for writes and corresponds to the device physical sector size. This code contains contributions from: * Johannes Thumshirn <jthumshirn@suse.de>, * Darrick J. Wong <darrick.wong@oracle.com>, * Christoph Hellwig <hch@lst.de>, * Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> and * Ting Yao <tingyao@hust.edu.cn>. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-10-29io-wq: small threadpool implementation for io_uringJens Axboe1-0/+3
This adds support for io-wq, a smaller and specialized thread pool implementation. This is meant to replace workqueues for io_uring. Among the reasons for this addition are: - We can assign memory context smarter and more persistently if we manage the life time of threads. - We can drop various work-arounds we have in io_uring, like the async_list. - We can implement hashed work insertion, to manage concurrency of buffered writes without needing a) an extra workqueue, or b) needlessly making the concurrency of said workqueue very low which hurts performance of multiple buffered file writers. - We can implement cancel through signals, for cancelling interruptible work like read/write (or send/recv) to/from sockets. - We need the above cancel for being able to assign and use file tables from a process. - We can implement a more thorough cancel operation in general. - We need it to move towards a syslet/threadlet model for even faster async execution. For that we need to take ownership of the used threads. This list is just off the top of my head. Performance should be the same, or better, at least that's what I've seen in my testing. io-wq supports basic NUMA functionality, setting up a pool per node. io-wq hooks up to the scheduler schedule in/out just like workqueue and uses that to drive the need for more/less workers. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-19Merge tag 'fsverity-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fs-verity support from Eric Biggers: "fs-verity is a filesystem feature that provides Merkle tree based hashing (similar to dm-verity) for individual readonly files, mainly for the purpose of efficient authenticity verification. This pull request includes: (a) The fs/verity/ support layer and documentation. (b) fs-verity support for ext4 and f2fs. Compared to the original fs-verity patchset from last year, the UAPI to enable fs-verity on a file has been greatly simplified. Lots of other things were cleaned up too. fs-verity is planned to be used by two different projects on Android; most of the userspace code is in place already. Another userspace tool ("fsverity-utils"), and xfstests, are also available. e2fsprogs and f2fs-tools already have fs-verity support. Other people have shown interest in using fs-verity too. I've tested this on ext4 and f2fs with xfstests, both the existing tests and the new fs-verity tests. This has also been in linux-next since July 30 with no reported issues except a couple minor ones I found myself and folded in fixes for. Ted and I will be co-maintaining fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add fs-verity support ext4: update on-disk format documentation for fs-verity ext4: add fs-verity read support ext4: add basic fs-verity support fs-verity: support builtin file signatures fs-verity: add SHA-512 support fs-verity: implement FS_IOC_MEASURE_VERITY ioctl fs-verity: implement FS_IOC_ENABLE_VERITY ioctl fs-verity: add data verification hooks for ->readpages() fs-verity: add the hook for file ->setattr() fs-verity: add the hook for file ->open() fs-verity: add inode and superblock fields fs-verity: add Kconfig and the helper functions for hashing fs: uapi: define verity bit for FS_IOC_GETFLAGS fs-verity: add UAPI header fs-verity: add MAINTAINERS file entry fs-verity: add a documentation file
2019-08-24erofs: move erofs out of stagingGao Xiang1-0/+1
EROFS filesystem has been merged into linux-staging for a year. EROFS is designed to be a better solution of saving extra storage space with guaranteed end-to-end performance for read-only files with the help of reduced metadata, fixed-sized output compression and decompression inplace technologies. In the past year, EROFS was greatly improved by many people as a staging driver, self-tested, betaed by a large number of our internal users, successfully applied to almost all in-service HUAWEI smartphones as the part of EMUI 9.1 and proven to be stable enough to be moved out of staging. EROFS is a self-contained filesystem driver. Although there are still some TODOs to be more generic, we have a dedicated team actively keeping on working on EROFS in order to make it better with the evolution of Linux kernel as the other in-kernel filesystems. As Pavel suggested, it's better to do as one commit since git can do moves and all histories will be saved in this way. Let's promote it from staging and enhance it more actively as a "real" part of kernel for more wider scenarios! Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Pavel Machek <pavel@denx.de> Cc: David Sterba <dsterba@suse.cz> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J . Wong <darrick.wong@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Richard Weinberger <richard@nod.at> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Li Guifu <bluce.liguifu@huawei.com> Cc: Fang Wei <fangwei1@huawei.com> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Link: https://lore.kernel.org/r/20190822213659.5501-1-hsiangkao@aol.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-29fs-verity: add Kconfig and the helper functions for hashingEric Biggers1-0/+2
Add the beginnings of the fs/verity/ support layer, including the Kconfig option and various helper functions for hashing. To start, only SHA-256 is supported, but other hash algorithms can easily be added. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-05fs: VALIDATE_FS_PARSER should default to nGeert Uytterhoeven1-1/+0
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser tables are vaguely sane. It was set to default to 'Y' for the moment to catch errors in upcoming fs conversion development. Make sure it is not enabled by default in the final release of v5.1. Fixes: 31d921c7fb969172 ("vfs: Add configuration parser helpers") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25unicode: introduce UTF-8 character databaseGabriel Krisman Bertazi1-0/+1
The decomposition and casefolding of UTF-8 characters are described in a prefix tree in utf8data.h, which is a generate from the Unicode Character Database (UCD), published by the Unicode Consortium, and should not be edited by hand. The structures in utf8data.h are meant to be used for lookup operations by the unicode subsystem, when decoding a utf-8 string. mkutf8data.c is the source for a program that generates utf8data.h. It was written by Olaf Weber from SGI and originally proposed to be merged into Linux in 2014. The original proposal performed the compatibility decomposition, NFKD, but the current version was modified by me to do canonical decomposition, NFD, as suggested by the community. The changes from the original submission are: * Rebase to mainline. * Fix out-of-tree-build. * Update makefile to build 11.0.0 ucd files. * drop references to xfs. * Convert NFKD to NFD. * Merge back robustness fixes from original patch. Requested by Dave Chinner. The original submission is archived at: <https://linux-xfs.oss.sgi.narkive.com/Xx10wjVY/rfc-unicode-utf-8-support-for-xfs> The utf8data.h file can be regenerated using the instructions in fs/unicode/README.utf8data. - Notes on the update from 8.0.0 to 11.0: The structure of the ucd files and special cases have not experienced any changes between versions 8.0.0 and 11.0.0. 8.0.0 saw the addition of Cherokee LC characters, which is an interesting case for case-folding. The update is accompanied by new tests on the test_ucd module to catch specific cases. No changes to mkutf8data script were required for the updates. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-13Merge branch 'work.mount' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount infrastructure updates from Al Viro: "The rest of core infrastructure; no new syscalls in that pile, but the old parts are switched to new infrastructure. At that point conversions of individual filesystems can happen independently; some are done here (afs, cgroup, procfs, etc.), there's also a large series outside of that pile dealing with NFS (quite a bit of option-parsing stuff is getting used there - it's one of the most convoluted filesystems in terms of mount-related logics), but NFS bits are the next cycle fodder. It got seriously simplified since the last cycle; documentation is probably the weakest bit at the moment - I considered dropping the commit introducing Documentation/filesystems/mount_api.txt (cutting the size increase by quarter ;-), but decided that it would be better to fix it up after -rc1 instead. That pile allows to do followup work in independent branches, which should make life much easier for the next cycle. fs/super.c size increase is unpleasant; there's a followup series that allows to shrink it considerably, but I decided to leave that until the next cycle" * 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits) afs: Use fs_context to pass parameters over automount afs: Add fs_context support vfs: Add some logging to the core users of the fs_context log vfs: Implement logging through fs_context vfs: Provide documentation for new mount API vfs: Remove kern_mount_data() hugetlbfs: Convert to fs_context cpuset: Use fs_context kernfs, sysfs, cgroup, intel_rdt: Support fs_context cgroup: store a reference to cgroup_ns into cgroup_fs_context cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper cgroup_do_mount(): massage calling conventions cgroup: stash cgroup_root reference into cgroup_fs_context cgroup2: switch to option-by-option parsing cgroup1: switch to option-by-option parsing cgroup: take options parsing into ->parse_monolithic() cgroup: fold cgroup1_mount() into cgroup1_get_tree() cgroup: start switching to fs_context ipc: Convert mqueue fs to fs_context proc: Add fs_context support to procfs ...
2019-02-28vfs: Add configuration parser helpersDavid Howells1-0/+7
Because the new API passes in key,value parameters, match_token() cannot be used with it. Instead, provide three new helpers to aid with parsing: (1) fs_parse(). This takes a parameter and a simple static description of all the parameters and maps the key name to an ID. It returns 1 on a match, 0 on no match if unknowns should be ignored and some other negative error code on a parse error. The parameter description includes a list of key names to IDs, desired parameter types and a list of enumeration name -> ID mappings. [!] Note that for the moment I've required that the key->ID mapping array is expected to be sorted and unterminated. The size of the array is noted in the fsconfig_parser struct. This allows me to use bsearch(), but I'm not sure any performance gain is worth the hassle of requiring people to keep the array sorted. The parameter type array is sized according to the number of parameter IDs and is indexed directly. The optional enum mapping array is an unterminated, unsorted list and the size goes into the fsconfig_parser struct. The function can do some additional things: (a) If it's not ambiguous and no value is given, the prefix "no" on a key name is permitted to indicate that the parameter should be considered negatory. (b) If the desired type is a single simple integer, it will perform an appropriate conversion and store the result in a union in the parse result. (c) If the desired type is an enumeration, {key ID, name} will be looked up in the enumeration list and the matching value will be stored in the parse result union. (d) Optionally generate an error if the key is unrecognised. This is called something like: enum rdt_param { Opt_cdp, Opt_cdpl2, Opt_mba_mpbs, nr__rdt_params }; const struct fs_parameter_spec rdt_param_specs[nr__rdt_params] = { [Opt_cdp] = { fs_param_is_bool }, [Opt_cdpl2] = { fs_param_is_bool }, [Opt_mba_mpbs] = { fs_param_is_bool }, }; const const char *const rdt_param_keys[nr__rdt_params] = { [Opt_cdp] = "cdp", [Opt_cdpl2] = "cdpl2", [Opt_mba_mpbs] = "mba_mbps", }; const struct fs_parameter_description rdt_parser = { .name = "rdt", .nr_params = nr__rdt_params, .keys = rdt_param_keys, .specs = rdt_param_specs, .no_source = true, }; int rdt_parse_param(struct fs_context *fc, struct fs_parameter *param) { struct fs_parse_result parse; struct rdt_fs_context *ctx = rdt_fc2context(fc); int ret; ret = fs_parse(fc, &rdt_parser, param, &parse); if (ret < 0) return ret; switch (parse.key) { case Opt_cdp: ctx->enable_cdpl3 = true; return 0; case Opt_cdpl2: ctx->enable_cdpl2 = true; return 0; case Opt_mba_mpbs: ctx->enable_mba_mbps = true; return 0; } return -EINVAL; } (2) fs_lookup_param(). This takes a { dirfd, path, LOOKUP_EMPTY? } or string value and performs an appropriate path lookup to convert it into a path object, which it will then return. If the desired type was a blockdev, the type of the looked up inode will be checked to make sure it is one. This can be used like: enum foo_param { Opt_source, nr__foo_params }; const struct fs_parameter_spec foo_param_specs[nr__foo_params] = { [Opt_source] = { fs_param_is_blockdev }, }; const char *char foo_param_keys[nr__foo_params] = { [Opt_source] = "source", }; const struct constant_table foo_param_alt_keys[] = { { "device", Opt_source }, }; const struct fs_parameter_description foo_parser = { .name = "foo", .nr_params = nr__foo_params, .nr_alt_keys = ARRAY_SIZE(foo_param_alt_keys), .keys = foo_param_keys, .alt_keys = foo_param_alt_keys, .specs = foo_param_specs, }; int foo_parse_param(struct fs_context *fc, struct fs_parameter *param) { struct fs_parse_result parse; struct foo_fs_context *ctx = foo_fc2context(fc); int ret; ret = fs_parse(fc, &foo_parser, param, &parse); if (ret < 0) return ret; switch (parse.key) { case Opt_source: return fs_lookup_param(fc, &foo_parser, param, &parse, &ctx->source); default: return -EINVAL; } } (3) lookup_constant(). This takes a table of named constants and looks up the given name within it. The table is expected to be sorted such that bsearch() be used upon it. Possibly I should require the table be terminated and just use a for-loop to scan it instead of using bsearch() to reduce hassle. Tables look something like: static const struct constant_table bool_names[] = { { "0", false }, { "1", true }, { "false", false }, { "no", false }, { "true", true }, { "yes", true }, }; and a lookup is done with something like: b = lookup_constant(bool_names, param->string, -1); Additionally, optional validation routines for the parameter description are provided that can be enabled at compile time. A later patch will invoke these when a filesystem is registered. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-02-06scsi: fs: remove exofsChristoph Hellwig1-3/+0
This was an example for using the SCSI OSD protocol, which we're trying to remove. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-11autofs: remove left-over autofs4 stubsLinus Torvalds1-1/+0
There's no need to retain the fs/autofs4 directory for backward compatibility. Adding an AUTOFS4_FS fragment to the autofs Kconfig and a module alias for autofs4 is sufficient for almost all cases. Not keeping fs/autofs4 remnants will prevent "insmod <path>/autofs4/autofs4.ko" from working but this shouldn't be used in automation scripts rather than modprobe(8). There were some comments about things to look out for with the module rename in the fs/autofs4/Kconfig that is removed by this patch, see the commit patch if you are interested. One potential problem with this change is that when the fs/autofs/Kconfig fragment for AUTOFS4_FS is removed any AUTOFS4_FS entries will be removed from the kernel config, resulting in no autofs file system being built if there is no AUTOFS_FS entry also. This would have also happened if the fs/autofs4 remnants had remained and is most likely to be a problem with automated builds. Please check your build configurations before the removal which will occur after the next couple of kernel releases. Acked-by: Ian Kent <raven@themaw.net> [ With edits and commit message from Ian Kent ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-09Merge tag 'libnvdimm-for-4.18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This adds a user for the new 'bytes-remaining' updates to memcpy_mcsafe() that you already received through Ingo via the x86-dax- for-linus pull. Not included here, but still targeting this cycle, is support for handling memory media errors (poison) consumed via userspace dax mappings. Summary: - DAX broke a fundamental assumption of truncate of file mapped pages. The truncate path assumed that it is safe to disconnect a pinned page from a file and let the filesystem reclaim the physical block. With DAX the page is equivalent to the filesystem block. Introduce dax_layout_busy_page() to enable filesystems to wait for pinned DAX pages to be released. Without this wait a filesystem could allocate blocks under active device-DMA to a new file. - DAX arranges for the block layer to be bypassed and uses dax_direct_access() + copy_to_iter() to satisfy read(2) calls. However, the memcpy_mcsafe() facility is available through the pmem block driver. In order to safely handle media errors, via the DAX block-layer bypass, introduce copy_to_iter_mcsafe(). - Fix cache management policy relative to the ACPI NFIT Platform Capabilities Structure to properly elide cache flushes when they are not necessary. The table indicates whether CPU caches are power-fail protected. Clarify that a deep flush is always performed on REQ_{FUA,PREFLUSH} requests" * tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) dax: Use dax_write_cache* helpers libnvdimm, pmem: Do not flush power-fail protected CPU caches libnvdimm, pmem: Unconditionally deep flush on *sync libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH acpi, nfit: Remove ecc_unit_size dax: dax_insert_mapping_entry always succeeds libnvdimm, e820: Register all pmem resources libnvdimm: Debug probe times linvdimm, pmem: Preserve read-only setting for pmem devices x86, nfit_test: Add unit test for memcpy_mcsafe() pmem: Switch to copy_to_iter_mcsafe() dax: Report bytes remaining in dax_iomap_actor() dax: Introduce a ->copy_to_iter dax operation uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation xfs, dax: introduce xfs_break_dax_layouts() xfs: prepare xfs_break_layouts() for another layout type xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL mm, fs, dax: handle layout changes to pinned dax mappings mm: fix __gup_device_huge vs unmap mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS ...
2018-06-08autofs: create autofs Kconfig and MakefileIan Kent1-0/+1
Create Makefile and Kconfig for autofs module. [raven@themaw.net: make autofs4 Kconfig depend on AUTOFS_FS] Link: http://lkml.kernel.org/r/152687649097.8263.7046086367407522029.stgit@pluto.themaw.net Link: http://lkml.kernel.org/r/152626705591.28589.356365986974038383.stgit@pluto.themaw.net Signed-off-by: Ian Kent <raven@themaw.net> Tested-by: Randy Dunlap <rdunlap@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08mm: restructure memfd codeMike Kravetz1-0/+3
With the addition of memfd hugetlbfs support, we now have the situation where memfd depends on TMPFS -or- HUGETLBFS. Previously, memfd was only supported on tmpfs, so it made sense that the code resided in shmem.c. In the current code, memfd is only functional if TMPFS is defined. If HUGETLFS is defined and TMPFS is not defined, then memfd functionality will not be available for hugetlbfs. This does not cause BUGs, just a lack of potentially desired functionality. Code is restructured in the following way: - include/linux/memfd.h is a new file containing memfd specific definitions previously contained in shmem_fs.h. - mm/memfd.c is a new file containing memfd specific code previously contained in shmem.c. - memfd specific code is removed from shmem_fs.h and shmem.c. - A new config option MEMFD_CREATE is added that is defined if TMPFS or HUGETLBFS is defined. No functional changes are made to the code: restructuring only. Link: http://lkml.kernel.org/r/20180415182119.4517-4-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Marc-Andr Lureau <marcandre.lureau@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-22mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPSDan Williams1-0/+1
In preparation for fixing dax-dma-vs-unmap issues, filesystems need to be able to rely on the fact that they will get wakeups on dev_pagemap page-idle events. Introduce MEMORY_DEVICE_FS_DAX and generic_dax_page_free() as common indicator / infrastructure for dax filesytems to require. With this change there are no users of the MEMORY_DEVICE_HOST designation, so remove it. The HMM sub-system extended dev_pagemap to arrange a callback when a dev_pagemap managed page is freed. Since a dev_pagemap page is free / idle when its reference count is 1 it requires an additional branch to check the page-type at put_page() time. Given put_page() is a hot-path we do not want to incur that check if HMM is not in use, so a static branch is used to avoid that overhead when not necessary. Now, the FS_DAX implementation wants to reuse this mechanism for receiving dev_pagemap ->page_free() callbacks. Rework the HMM-specific static-key into a generic mechanism that either HMM or FS_DAX code paths can enable. For ARCH=um builds, and any other arch that lacks ZONE_DEVICE support, care must be taken to compile out the DEV_PAGEMAP_OPS infrastructure. However, we still need to support FS_DAX in the FS_DAX_LIMITED case implemented by the s390/dcssblk driver. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Thomas Meyer <thomas@m3y3r.de> Reported-by: Dave Jiang <dave.jiang@intel.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-28docs/admin-guide/mm: start moving here files from Documentation/vmMike Rapoport1-1/+1
Several documents in Documentation/vm fit quite well into the "admin/user guide" category. The documents that don't overload the reader with lots of implementation details and provide coherent description of certain feature can be moved to Documentation/admin-guide/mm. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-04-16docs/vm: rename documentation files to .rstMike Rapoport1-1/+1
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-02-06Merge tag 'libnvdimm-for-4.16' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Ross Zwisler: - Require struct page by default for filesystem DAX to remove a number of surprising failure cases. This includes failures with direct I/O, gdb and fork(2). - Add support for the new Platform Capabilities Structure added to the NFIT in ACPI 6.2a. This new table tells us whether the platform supports flushing of CPU and memory controller caches on unexpected power loss events. - Revamp vmem_altmap and dev_pagemap handling to clean up code and better support future future PCI P2P uses. - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}. - Enhance nfit_test so we can test some of the new things added in version 1.6 of the DSM specification. This includes testing firmware download and simulating the Last Shutdown State (LSS) status. * tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits) libnvdimm, namespace: remove redundant initialization of 'nd_mapping' acpi, nfit: fix register dimm error handling libnvdimm, namespace: make min namespace size 4K tools/testing/nvdimm: force nfit_test to depend on instrumented modules libnvdimm/nfit_test: adding support for unit testing enable LSS status libnvdimm/nfit_test: add firmware download emulation nfit-test: Add platform cap support from ACPI 6.2a to test libnvdimm: expose platform persistence attribute for nd_region acpi: nfit: add persistent memory control flag for nd_region acpi: nfit: Add support for detect platform CPU cache flush on power loss device-dax: Fix trailing semicolon libnvdimm, btt: fix uninitialized err_lock dax: require 'struct page' by default for filesystem dax ext2: auto disable dax instead of failing mount ext4: auto disable dax instead of failing mount mm, dax: introduce pfn_t_special() mm: Fix devm_memremap_pages() collision handling mm: Fix memory size alignment in devm_memremap_pages_release() memremap: merge find_dev_pagemap into get_dev_pagemap memremap: change devm_memremap_pages interface to use struct dev_pagemap ...
2018-02-01Merge tag 'staging-4.16-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here is the big Staging and IIO driver patches for 4.16-rc1. There is the normal amount of new IIO drivers added, like all releases. The networking IPX and the ncpfs filesystem are moved into the staging tree, as they are on their way out of the kernel due to lack of use anymore. The visorbus subsystem finall has started moving out of the staging tree to the "real" part of the kernel, and the most and fsl-mc codebases are almost ready to move out, that will probably happen for 4.17-rc1 if all goes well. Other than that, there is a bunch of license header cleanups in the tree, along with the normal amount of coding style churn that we all know and love for this codebase. I also got frustrated at the Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting huge chunks of it that were never even being used. Full details of everything is in the shortlog. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits) staging: rtlwifi: remove redundant initialization of 'cfg_cmd' staging: rtl8723bs: remove a couple of redundant initializations staging: comedi: reformat lines to 80 chars or less staging: lustre: separate a connection destroy from free struct kib_conn Staging: rtl8723bs: Use !x instead of NULL comparison Staging: rtl8723bs: Remove dead code Staging: rtl8723bs: Change names to conform to the kernel code staging: ccree: Fix missing blank line after declaration staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd' staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST staging: fbtft: remove unused FB_TFT_SSD1325 kconfig staging: comedi: dt2811: remove redundant initialization of 'ns' staging: wilc1000: fix alignments to match open parenthesis staging: wilc1000: removed unnecessary defined enums typedef staging: wilc1000: remove unnecessary use of parentheses staging: rtl8192u: remove redundant initialization of 'timeout' staging: sm750fb: fix CamelCase for dispSet var staging: lustre: lnet/selftest: fix compile error on UP build staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons staging: rts5208: Fix "seg_no" calculation in reset_ms_card() ...
2018-01-20dax: require 'struct page' by default for filesystem daxDan Williams1-0/+7
If a dax buffer from a device that does not map pages is passed to read(2) or write(2) as a target for direct-I/O it triggers SIGBUS. If gdb attempts to examine the contents of a dax buffer from a device that does not map pages it triggers SIGBUS. If fork(2) is called on a process with a dax mapping from a device that does not map pages it triggers SIGBUS. 'struct page' is required otherwise several kernel code paths break in surprising ways. Disable filesystem-dax on devices that do not map pages. In addition to needing pfn_to_page() to be valid we also require devmap pages. We need this to detect dax pages in the get_user_pages_fast() path and so that we can stop managing the VM_MIXEDMAP flag. For DAX drivers that have not supported get_user_pages() to date we allow them to opt-in to supporting DAX with the CONFIG_FS_DAX_LIMITED configuration option which requires ->direct_access() to return pfn_t_special() pfns. This leaves DAX support in brd disabled and scheduled for removal. Note that when the initial dax support was being merged a few years back there was concern that struct page was unsuitable for use with next generation persistent memory devices. The theoretical concern was that struct page access, being such a hotly used data structure in the kernel, would lead to media wear out. While that was a reasonable conservative starting position it has not held true in practice. We have long since committed to using devm_memremap_pages() to support higher order kernel functionality that needs get_user_pages() and pfn_to_page(). Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-01-01fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.atAdam Borowski1-5/+1
This link is replicated in most filesystems' config stanzas. Referring to an archived version of that site is pointless as it mostly deals with patches; user documentation is available elsewhere. Signed-off-by: Adam Borowski <kilobyte@angband.pl> CC: Alexander Viro <viro@zeniv.linux.org.uk> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Chao Yu <yuchao0@huawei.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-11-28ncpfs: move net/ncpfs to drivers/staging/ncpfsStephen Hemminger1-1/+0
The Netware Core Protocol is a file system that talks to Netware clients over IPX. Since IPX has been dead for many years move the file system into staging for eventual interment. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-13fs/Kconfig: kill CONFIG_PERCPU_RWSEM some moreDavidlohr Bueso1-1/+0
As of commit bf3eac84c42d ("percpu-rwsem: kill CONFIG_PERCPU_RWSEM") we unconditionally build pcpu-rwsems. Remove a leftover in for FILE_LOCKING. Link: http://lkml.kernel.org/r/20170518180115.2794-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08block, dax: move "select DAX" from BLOCK to FS_DAXDan Williams1-0/+1
For configurations that do not enable DAX filesystems or drivers, do not require the DAX core to be built. Given that the 'direct_access' method has been removed from 'block_device_operations', we can also go ahead and remove the block-related dax helper functions from fs/block_dev.c to drivers/dax/super.c. This keeps dax details out of the block layer and lets the DAX core be built as a module in the FS_DAX=n case. Filesystems need to include dax.h to call bdev_dax_supported(). Cc: linux-xfs@vger.kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-01-25dax: fix build warnings with FS_DAX and !FS_IOMAPRoss Zwisler1-0/+1
As reported by Arnd: https://lkml.org/lkml/2017/1/10/756 Compiling with the following configuration: # CONFIG_EXT2_FS is not set # CONFIG_EXT4_FS is not set # CONFIG_XFS_FS is not set # CONFIG_FS_IOMAP depends on the above filesystems, as is not set CONFIG_FS_DAX=y generates build warnings about unused functions in fs/dax.c: fs/dax.c:878:12: warning: `dax_insert_mapping' defined but not used [-Wunused-function] static int dax_insert_mapping(struct address_space *mapping, ^~~~~~~~~~~~~~~~~~ fs/dax.c:572:12: warning: `copy_user_dax' defined but not used [-Wunused-function] static int copy_user_dax(struct block_device *bdev, sector_t sector, size_t size, ^~~~~~~~~~~~~ fs/dax.c:542:12: warning: `dax_load_hole' defined but not used [-Wunused-function] static int dax_load_hole(struct address_space *mapping, void **entry, ^~~~~~~~~~~~~ fs/dax.c:312:14: warning: `grab_mapping_entry' defined but not used [-Wunused-function] static void *grab_mapping_entry(struct address_space *mapping, pgoff_t index, ^~~~~~~~~~~~~~~~~~ Now that the struct buffer_head based DAX fault paths and I/O path have been removed we really depend on iomap support being present for DAX. Make this explicit by selecting FS_IOMAP if we compile in DAX support. This allows us to remove conditional selections of FS_IOMAP when FS_DAX was present for ext2 and ext4, and to remove an #ifdef in fs/dax.c. Link: http://lkml.kernel.org/r/1484087383-29478-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: - more ->d_init() stuff (work.dcache) - pathname resolution cleanups (work.namei) - a few missing iov_iter primitives - copy_from_iter_full() and friends. Either copy the full requested amount, advance the iterator and return true, or fail, return false and do _not_ advance the iterator. Quite a few open-coded callers converted (and became more readable and harder to fuck up that way) (work.iov_iter) - several assorted patches, the big one being logfs removal * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: logfs: remove from tree vfs: fix put_compat_statfs64() does not handle errors namei: fold should_follow_link() with the step into not-followed link namei: pass both WALK_GET and WALK_MORE to should_follow_link() namei: invert WALK_PUT logics namei: shift interpretation of LOOKUP_FOLLOW inside should_follow_link() namei: saner calling conventions for mountpoint_last() namei.c: get rid of user_path_parent() switch getfrag callbacks to ..._full() primitives make skb_add_data,{_nocache}() and skb_copy_to_page_nocache() advance only on success [iov_iter] new primitives - copy_from_iter_full() and friends don't open-code file_inode() ceph: switch to use of ->d_init() ceph: unify dentry_operations instances lustre: switch to use of ->d_init()
2016-12-15logfs: remove from treeChristoph Hellwig1-1/+0
Logfs was introduced to the kernel in 2009, and hasn't seen any non drive-by changes since 2012, while having lots of unsolved issues including the complete lack of error handling, with more and more issues popping up without any fixes. The logfs.org domain has been bouncing from a mail, and the maintainer on the non-logfs.org domain hasn't repsonded to past queries either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-08dax: remove "depends on BROKEN" from FS_DAX_PMDRoss Zwisler1-1/+0
Now that DAX PMD faults are once again working and are now participating in DAX's radix tree locking scheme, allow their config option to be enabled. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-10-08mm/hugetlb: introduce ARCH_HAS_GIGANTIC_PAGEYisheng Xie1-0/+3
Avoid making ifdef get pretty unwieldy if many ARCHs support gigantic page. No functional change with this patch. Link: http://lkml.kernel.org/r/1475227569-63446-2-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-22fs/locks: Replace lg_local with a per-cpu spinlockPeter Zijlstra1-0/+1
As Oleg suggested, replace file_lock_list with a structure containing the hlist head and a spinlock. This completely removes the lglock from fs/locks. Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: der.herr@hofr.at Cc: paulmck@linux.vnet.ibm.com Cc: riel@redhat.com Cc: tj@kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-05Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-0/+6
Pull nfsd updates from Bruce Fields: "Highlights: - Trond made a change to the server's tcp logic that allows a fast client to better take advantage of high bandwidth networks, but may increase the risk that a single client could starve other clients; a new sunrpc.svc_rpc_per_connection_limit parameter should help mitigate this in the (hopefully unlikely) event this becomes a problem in practice. - Tom Haynes added a minimal flex-layout pnfs server, which is of no use in production for now--don't build it unless you're doing client testing or further server development" * tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits) nfsd: remove some dead code in nfsd_create_locked() nfsd: drop unnecessary MAY_EXEC check from create nfsd: clean up bad-type check in nfsd_create_locked nfsd: remove unnecessary positive-dentry check nfsd: reorganize nfsd_create nfsd: check d_can_lookup in fh_verify of directories nfsd: remove redundant zero-length check from create nfsd: Make creates return EEXIST instead of EACCES SUNRPC: Detect immediate closure of accepted sockets SUNRPC: accept() may return sockets that are still in SYN_RECV nfsd: allow nfsd to advertise multiple layout types nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock nfsd/blocklayout: Make sure calculate signature/designator length aligned xfs: abstract block export operations from nfsd layouts SUNRPC: Remove unused callback xpo_adjust_wspace() SUNRPC: Change TCP socket space reservation SUNRPC: Add a server side per-connection limit SUNRPC: Micro optimisation for svc_data_ready SUNRPC: Call the default socket callbacks instead of open coding SUNRPC: lock the socket while detaching it ...
2016-07-15xfs: abstract block export operations from nfsd layoutsBenjamin Coddington1-0/+6
Instead of creeping pnfs layout configuration into filesystems, move the definition of block-based export operations under a more abstract configuration. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Dave Chinner <david@fromorbit.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-06-21fs: introduce iomap infrastructureChristoph Hellwig1-0/+3
Add infrastructure for multipage buffered writes. This is implemented using an main iterator that applies an actor function to a range that can be written. This infrastucture is used to implement a buffered write helper, one to zero file ranges and one to implement the ->page_mkwrite VM operations. All of them borrow a fair amount of code from fs/buffers. for now by using an internal version of __block_write_begin that gets passed an iomap and builds the corresponding buffer head. The file system is gets a set of paired ->iomap_begin and ->iomap_end calls which allow it to map/reserve a range and get a notification once the write code is finished with it. Based on earlier code from Dave Chinner. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-20dax: Make huge page handling depend of CONFIG_BROKENJan Kara1-0/+1
Currently the handling of huge pages for DAX is racy. For example the following can happen: CPU0 (THP write fault) CPU1 (normal read fault) __dax_pmd_fault() __dax_fault() get_block(inode, block, &bh, 0) -> not mapped get_block(inode, block, &bh, 0) -> not mapped if (!buffer_mapped(&bh) && write) get_block(inode, block, &bh, 1) -> allocates blocks truncate_pagecache_range(inode, lstart, lend); dax_load_hole(); This results in data corruption since process on CPU1 won't see changes into the file done by CPU0. The race can happen even if two normal faults race however with THP the situation is even worse because the two faults don't operate on the same entries in the radix tree and we want to use these entries for serialization. So make THP support in DAX code depend on CONFIG_BROKEN for now. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2016-03-26Merge tag 'ofs-pull-tag-1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs filesystem from Mike Marshall. This finally merges the long-pending orangefs filesystem, which has been much cleaned up with input from Al Viro over the last six months. From the documentation file: "OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal for large storage problems faced by HPC, BigData, Streaming Video, Genomics, Bioinformatics. Orangefs, originally called PVFS, was first developed in 1993 by Walt Ligon and Eric Blumer as a parallel file system for Parallel Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns of parallel programs. Orangefs features include: - Distributes file data among multiple file servers - Supports simultaneous access by multiple clients - Stores file data and metadata on servers using local file system and access methods - Userspace implementation is easy to install and maintain - Direct MPI support - Stateless" see Documentation/filesystems/orangefs.txt for more in-depth details. * tag 'ofs-pull-tag-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: (174 commits) orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s ornagefs: ensure that truncate has an up to date inode size orangefs: move code which sets i_link to orangefs_inode_getattr orangefs: remove needless wrapper around GFP_KERNEL orangefs: remove wrapper around mutex_lock(&inode->i_mutex) orangefs: refactor inode type or link_target change detection orangefs: use new getattr for revalidate and remove old getattr orangefs: use new getattr in inode getattr and permission orangefs: use new orangefs_inode_getattr to get size in write and llseek orangefs: use new orangefs_inode_getattr to create new inodes orangefs: rename orangefs_inode_getattr to orangefs_inode_old_getattr orangefs: remove inode->i_lock wrapper orangefs: put register_chrdev immediately before register_filesystem ...
2016-03-18fs crypto: move per-file encryption from f2fs tree to fs/cryptoJaegeuk Kim1-0/+2
This patch adds the renamed functions moved from the f2fs crypto files. 1. definitions for per-file encryption used by ext4 and f2fs. 2. crypto.c for encrypt/decrypt functions a. IO preparation: - fscrypt_get_ctx / fscrypt_release_ctx b. before IOs: - fscrypt_encrypt_page - fscrypt_decrypt_page - fscrypt_zeroout_range c. after IOs: - fscrypt_decrypt_bio_pages - fscrypt_pullback_bio_page - fscrypt_restore_control_page 3. policy.c supporting context management. a. For ioctls: - fscrypt_process_policy - fscrypt_get_policy b. For context permission - fscrypt_has_permitted_context - fscrypt_inherit_context 4. keyinfo.c to handle permissions - fscrypt_get_encryption_info - fscrypt_free_encryption_info 5. fname.c to support filename encryption a. general wrapper functions - fscrypt_fname_disk_to_usr - fscrypt_fname_usr_to_disk - fscrypt_setup_filename - fscrypt_free_filename b. specific filename handling functions - fscrypt_fname_alloc_buffer - fscrypt_fname_free_buffer 6. Makefile and Kconfig Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Michael Halcrow <mhalcrow@google.com> Signed-off-by: Ildar Muslukhov <ildarm@google.com> Signed-off-by: Uday Savagaonkar <savagaon@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-03-14Orangefs: merge to v4.5Mike Marshall1-1/+12
Merge tag 'v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into current Linux 4.5