summaryrefslogtreecommitdiff
path: root/include/kvm
AgeCommit message (Collapse)AuthorFilesLines
2017-11-29KVM: arm/arm64: Don't enable/disable physical timer access on VHEChristoffer Dall1-3/+0
After the timer optimization rework we accidentally end up calling physical timer enable/disable functions on VHE systems, which is neither needed nor correct, since the CNTHCTL_EL2 register format is different when HCR_EL2.E2H is set. The CNTHCTL_EL2 is initialized when CPUs become online in kvm_timer_init_vhe() and we don't have to call these functions on VHE systems, which also allows us to inline the non-VHE functionality. Reported-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-10KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking sourceMarc Zyngier1-0/+3
The doorbell interrupt is only useful if the vcpu is blocked on WFI. In all other cases, recieving a doorbell interrupt is just a waste of cycles. So let's only enable the doorbell if a vcpu is getting blocked, and disable it when it is unblocked. This is very similar to what we're doing for the background timer. Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-10KVM: arm/arm64: GICv4: Wire mapping/unmapping of VLPIs in VFIO irq bypassMarc Zyngier1-0/+8
Let's use the irq bypass mechanism also used for x86 posted interrupts to intercept the virtual PCIe endpoint configuration and establish our LPI->VLPI mapping. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-10KVM: arm/arm64: GICv4: Add init/teardown of the per-VM vPE irq domainMarc Zyngier1-0/+19
In order to control the GICv4 view of virtual CPUs, we rely on an irqdomain allocated for that purpose. Let's add a couple of helpers to that effect. At the same time, the vgic data structures gain new fields to track all this... erm... wonderful stuff. The way we hook into the vgic init is slightly convoluted. We need the vgic to be initialized (in order to guarantee that the number of vcpus is now fixed), and we must have a vITS (otherwise this is all very pointless). So we end-up calling the init from both vgic_init and vgic_its_create. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-10KVM: arm/arm64: GICv4: Add property field and per-VM predicateMarc Zyngier1-0/+3
Add a new has_gicv4 field in the global VGIC state that indicates whether the HW is GICv4 capable, as a per-VM predicate indicating if there is a possibility for a VM to support direct injection (the above being true and the VM having an ITS). Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-06KVM: arm/arm64: vgic: restructure kvm_vgic_(un)map_phys_irqEric Auger1-3/+5
We want to reuse the core of the map/unmap functions for IRQ forwarding. Let's move the computation of the hwirq in kvm_vgic_map_phys_irq and pass the linux IRQ as parameter. the host_irq is added to struct vgic_irq. We introduce kvm_vgic_map/unmap_irq which take a struct vgic_irq handle as a parameter. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-11-06KVM: arm/arm64: Rework kvm_timer_should_fireChristoffer Dall1-1/+2
kvm_timer_should_fire() can be called in two different situations from the kvm_vcpu_block(). The first case is before calling kvm_timer_schedule(), used for wait polling, and in this case the VCPU thread is running and the timer state is loaded onto the hardware so all we have to do is check if the virtual interrupt lines are asserted, becasue the timer interrupt handler functions will raise those lines as appropriate. The second case is inside the wait loop of kvm_vcpu_block(), where we have already called kvm_timer_schedule() and therefore the hardware will be disabled and the software view of the timer state is up to date (timer->loaded is false), and so we can simply check if the timer should fire by looking at the software state. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-06KVM: arm/arm64: Get rid of kvm_timer_flush_hwstateChristoffer Dall1-1/+0
Now when both the vtimer and the ptimer when using both the in-kernel vgic emulation and a userspace IRQ chip are driven by the timer signals and at the vcpu load/put boundaries, instead of recomputing the timer state at every entry/exit to/from the guest, we can get entirely rid of the flush hwstate function. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-06KVM: arm/arm64: Avoid timer save/restore in vcpu entry/exitChristoffer Dall1-2/+14
We don't need to save and restore the hardware timer state and examine if it generates interrupts on on every entry/exit to the guest. The timer hardware is perfectly capable of telling us when it has expired by signaling interrupts. When taking a vtimer interrupt in the host, we don't want to mess with the timer configuration, we just want to forward the physical interrupt to the guest as a virtual interrupt. We can use the split priority drop and deactivate feature of the GIC to do this, which leaves an EOI'ed interrupt active on the physical distributor, making sure we don't keep taking timer interrupts which would prevent the guest from running. We can then forward the physical interrupt to the VM using the HW bit in the LR of the GIC, like we do already, which lets the guest directly deactivate both the physical and virtual timer simultaneously, allowing the timer hardware to exit the VM and generate a new physical interrupt when the timer output is again asserted later on. We do need to capture this state when migrating VCPUs between physical CPUs, however, which we use the vcpu put/load functions for, which are called through preempt notifiers whenever the thread is scheduled away from the CPU or called directly if we return from the ioctl to userspace. One caveat is that we have to save and restore the timer state in both kvm_timer_vcpu_[put/load] and kvm_timer_[schedule/unschedule], because we can have the following flows: 1. kvm_vcpu_block 2. kvm_timer_schedule 3. schedule 4. kvm_timer_vcpu_put (preempt notifier) 5. schedule (vcpu thread gets scheduled back) 6. kvm_timer_vcpu_load (preempt notifier) 7. kvm_timer_unschedule And a version where we don't actually call schedule: 1. kvm_vcpu_block 2. kvm_timer_schedule 7. kvm_timer_unschedule Since kvm_timer_[schedule/unschedule] may not be followed by put/load, but put/load also may be called independently, we call the timer save/restore functions from both paths. Since they rely on the loaded flag to never save/restore when unnecessary, this doesn't cause any harm, and we ensure that all invokations of either set of functions work as intended. An added benefit beyond not having to read and write the timer sysregs on every entry and exit is that we no longer have to actively write the active state to the physical distributor, because we configured the irq for the vtimer to only get a priority drop when handling the interrupt in the GIC driver (we called irq_set_vcpu_affinity()), and the interrupt stays active after firing on the host. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-06KVM: arm/arm64: Use separate timer for phys timer emulationChristoffer Dall1-0/+3
We were using the same hrtimer for emulating the physical timer and for making sure a blocking VCPU thread would be eventually woken up. That worked fine in the previous arch timer design, but as we are about to actually use the soft timer expire function for the physical timer emulation, change the logic to use a dedicated hrtimer. This has the added benefit of not having to cancel any work in the sync path, which in turn allows us to run the flush and sync with IRQs disabled. Note that the hrtimer used to program the host kernel's timer to generate an exit from the guest when the emulated physical timer fires never has to inject any work, and to share the soft_timer_cancel() function with the bg_timer, we change the function to only cancel any pending work if the pointer to the work struct is not null. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-11-06KVM: arm/arm64: Rename soft timer to bg_timerChristoffer Dall1-1/+1
As we are about to introduce a separate hrtimer for the physical timer, call this timer bg_timer, because we refer to this timer as the background timer in the code and comments elsewhere. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-06KVM: arm/arm64: Make timer_arm and timer_disarm helpers more genericChristoffer Dall1-3/+0
We are about to add an additional soft timer to the arch timer state for a VCPU and would like to be able to reuse the functions to program and cancel a timer, so we make them slightly more generic and rename to make it more clear that these functions work on soft timers and not the hardware resource that this code is managing. The armed flag on the timer state is only used to assert a condition, and we don't rely on this assertion in any meaningful way, so we can simply get rid of this flack and slightly reduce complexity. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-07-25KVM: arm/arm64: PMU: Fix overflow interrupt injectionAndrew Jones1-2/+0
kvm_pmu_overflow_set() is called from perf's interrupt handler, making the call of kvm_vgic_inject_irq() from it introduced with "KVM: arm/arm64: PMU: remove request-less vcpu kick" a really bad idea, as it's quite easy to try and retake a lock that the interrupted context is already holding. The fix is to use a vcpu kick, leaving the interrupt injection to kvm_pmu_sync_hwstate(), like it was doing before the refactoring. We don't just revert, though, because before the kick was request-less, leaving the vcpu exposed to the request-less vcpu kick race, and also because the kick was used unnecessarily from register access handlers. Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-15KVM: arm64: vgic-v3: Add hook to handle guest GICv3 sysreg accesses at EL2Marc Zyngier1-0/+1
In order to start handling guest access to GICv3 system registers, let's add a hook that will get called when we trap a system register access. This is gated by a new static key (vgic_v3_cpuif_trap). Tested-by: Alexander Graf <agraf@suse.de> Acked-by: David Daney <david.daney@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-06-15Merge branch 'kvmarm-master/master' into HEADMarc Zyngier1-1/+4
2017-06-08KVM: arm/arm64: Don't assume initialized vgic when setting PMU IRQChristoffer Dall1-0/+2
The PMU IRQ number is set through the VCPU device's KVM_SET_DEVICE_ATTR ioctl handler for the KVM_ARM_VCPU_PMU_V3_IRQ attribute, but there is no enforced or stated requirement that this must happen after initializing the VGIC. As a result, calling vgic_valid_spi() which relies on the nr_spis being set during the VGIC init can incorrectly fail. Introduce irq_is_spi, which determines if an IRQ number is within the SPI range without verifying it against the actual VGIC properties. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Disallow userspace control of in-kernel IRQ linesChristoffer Dall1-3/+1
When injecting an IRQ to the VGIC, you now have to present an owner token for that IRQ line to show that you are the owner of that line. IRQ lines driven from userspace or via an irqfd do not have an owner and will simply pass a NULL pointer. Also get rid of the unused kvm_vgic_inject_mapped_irq prototype. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Introduce an allocator for in-kernel irq linesChristoffer Dall1-0/+5
Having multiple devices being able to signal the same interrupt line is very confusing and almost certainly guarantees a configuration error. Therefore, introduce a very simple allocator which allows a device to claim an interrupt line from the vgic for a given VM. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Allow setting the timer IRQ numbers from userspaceChristoffer Dall1-0/+4
First we define an ABI using the vcpu devices that lets userspace set the interrupt numbers for the various timers on both the 32-bit and 64-bit KVM/ARM implementations. Second, we add the definitions for the groups and attributes introduced by the above ABI. (We add the PMU define on the 32-bit side as well for symmetry and it may get used some day.) Third, we set up the arch-specific vcpu device operation handlers to call into the timer code for anything related to the KVM_ARM_VCPU_TIMER_CTRL group. Fourth, we implement support for getting and setting the timer interrupt numbers using the above defined ABI in the arch timer code. Fifth, we introduce error checking upon enabling the arch timer (which is called when first running a VCPU) to check that all VCPUs are configured to use the same PPI for the timer (as mandated by the architecture) and that the virtual and physical timers are not configured to use the same IRQ number. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Move timer IRQ default init to arch_timer.cChristoffer Dall1-3/+1
We currently initialize the arch timer IRQ numbers from the reset code, presumably because we once intended to model multiple CPU or SoC types from within the kernel and have hard-coded reset values in the reset code. As we are moving towards userspace being in charge of more fine-grained CPU emulation and stitching together the pieces needed to emulate a particular type of CPU, we should no longer have a tight coupling between resetting a VCPU and setting IRQ numbers. Therefore, move the logic to define and use the default IRQ numbers to the timer code and set the IRQ number immediately when creating the VCPU. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm/arm64: Move irq_is_ppi() to header fileChristoffer Dall1-0/+2
We are about to need this define in the arch timer code as well so move it to a common location. Signed-off-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-08KVM: arm64: Allow creating the PMU without the in-kernel GICChristoffer Dall1-0/+6
Since we got support for devices in userspace which allows reporting the PMU overflow output status to userspace, we should actually allow creating the PMU on systems without an in-kernel irqchip, which in turn requires us to slightly clarify error codes for the ABI and move things around for the initialization phase. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-18KVM: arm/arm64: Fix bug when registering redist iodevsChristoffer Dall1-1/+4
If userspace creates the VCPUs after initializing the VGIC, then we end up in a situation where we trigger a bug in kvm_vcpu_get_idx(), because it is called prior to adding the VCPU into the vcpus array on the VM. There is no tight coupling between the VCPU index and the area of the redistributor region used for the VCPU, so we can simply ensure that all creations of redistributors are serialized per VM, and increment an offset when we successfully add a redistributor. The vgic_register_redist_iodev() function can be called from two paths: vgic_redister_all_redist_iodev() which is called via the kvm_vgic_addr() device attribute handler. This patch already holds the kvm->lock mutex. The other path is via kvm_vgic_vcpu_init, which is called through a longer chain from kvm_vm_ioctl_create_vcpu(), which releases the kvm->lock mutex just before calling kvm_arch_vcpu_create(), so we can simply take this mutex again later for our purposes. Fixes: ab6f468c10 ("KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs") Signed-off-by: Christoffer Dall <cdall@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09Merge tag 'kvm-arm-for-v4.12-round2' of ↵Paolo Bonzini1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD Second round of KVM/ARM Changes for v4.12. Changes include: - A fix related to the 32-bit idmap stub - A fix to the bitmask used to deode the operands of an AArch32 CP instruction - We have moved the files shared between arch/arm/kvm and arch/arm64/kvm to virt/kvm/arm - We add support for saving/restoring the virtual ITS state to userspace
2017-05-09KVM: arm/arm64: Get rid of its->initialized fieldMarc Zyngier1-1/+0
The its->initialized doesn't bring much to the table, and creates unnecessary ordering between setting the address and initializing it (which amounts to exactly nothing). Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op it deserves to be. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUsChristoffer Dall1-0/+1
Instead of waiting with registering KVM iodevs until the first VCPU is run, we can actually create the iodevs when the redist base address is set. The only downside is that we must now also check if we need to do this for VCPUs which are created after creating the VGIC, because there is no enforced ordering between creating the VGIC (and setting its base addresses) and creating the VCPUs. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds3-6/+12
Pull KVM updates from Paolo Bonzini: "ARM: - HYP mode stub supports kexec/kdump on 32-bit - improved PMU support - virtual interrupt controller performance improvements - support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) MIPS: - basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) PPC: - in-kernel acceleration for VFIO s390: - support for guests without storage keys - adapter interruption suppression x86: - usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits - emulation of CPL3 CPUID faulting generic: - first part of VCPU thread request API - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) kvm: nVMX: Don't validate disabled secondary controls KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick Revert "KVM: Support vCPU-based gfn->hva cache" tools/kvm: fix top level makefile KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING KVM: Documentation: remove VM mmap documentation kvm: nVMX: Remove superfluous VMX instruction fault checks KVM: x86: fix emulation of RSM and IRET instructions KVM: mark requests that need synchronization KVM: return if kvm_vcpu_wake_up() did wake up the VCPU KVM: add explicit barrier to kvm_vcpu_kick KVM: perform a wake_up in kvm_make_all_cpus_request KVM: mark requests that do not need a wakeup KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up KVM: x86: always use kvm_make_request instead of set_bit KVM: add kvm_{test,clear}_request to replace {test,clear}_bit s390: kvm: Cpu model support for msa6, msa7 and msa8 KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK kvm: better MWAIT emulation for guests KVM: x86: virtualize cpuid faulting ...
2017-05-08KVM: arm64: vgic-its: Introduce migration ABI infrastructureEric Auger1-0/+3
We plan to support different migration ABIs, ie. characterizing the ITS table layout format in guest RAM. For example, a new ABI will be needed if vLPIs get supported for nested use case. So let's introduce an array of supported ABIs (at the moment a single ABI is supported though). The following characteristics are foreseen to vary with the ABI: size of table entries, save/restore operation, the way abi settings are applied. By default the MAX_ABI_REV is applied on its creation. In subsequent patches we will introduce a way for the userspace to change the ABI in use. The entry sizes now are set according to the ABI version and not hardcoded anymore. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-04-09KVM: arm/arm64: Report PMU overflow interrupts to userspace irqchipChristoffer Dall1-0/+7
When not using an in-kernel VGIC, but instead emulating an interrupt controller in userspace, we should report the PMU overflow status to that userspace interrupt controller using the KVM_CAP_ARM_USER_IRQ feature. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-04-09KVM: arm/arm64: Support arch timers with a userspace gicAlexander Graf1-0/+2
If you're running with a userspace gic or other interrupt controller (that is no vgic in the kernel), then you have so far not been able to use the architected timers, because the output of the architected timers, which are driven inside the kernel, was a kernel-only construct between the arch timer code and the vgic. This patch implements the new KVM_CAP_ARM_USER_IRQ feature, where we use a side channel on the kvm_run structure, run->s.regs.device_irq_level, to always notify userspace of the timer output levels when using a userspace irqchip. This works by ensuring that before we enter the guest, if the timer output level has changed compared to what we last told userspace, we don't enter the guest, but instead return to userspace to notify it of the new level. If we are exiting, because of an MMIO for example, and the level changed at the same time, the value is also updated and userspace can sample the line as it needs. This is nicely achieved simply always updating the timer_irq_level field after the main run loop. Note that the kvm_timer_update_irq trace event is changed to show the host IRQ number for the timer instead of the guest IRQ number, because the kernel no longer know which IRQ userspace wires up the timer signal to. Also note that this patch implements all required functionality but does not yet advertise the capability. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-04-09KVM: arm/arm64: vgic: Get rid of MISR and EISR fieldsChristoffer Dall1-4/+0
We don't use these fields anymore so let's nuke them completely. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-04-09KVM: arm/arm64: vgic: Get rid of live_lrsChristoffer Dall1-2/+0
There is no need to calculate and maintain live_lrs when we always populate the lowest numbered LRs first on every entry and clear all LRs on every exit. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-04-09KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/putChristoffer Dall1-0/+3
We don't have to save/restore the VMCR on every entry to/from the guest, since on GICv2 we can access the control interface from EL1 and on VHE systems with GICv3 we can access the control interface from KVM running in EL2. GICv3 systems without VHE becomes the rare case, which has to save/restore the register on each round trip. Note that userspace accesses may see out-of-date values if the VCPU is running while accessing the VGIC state via the KVM device API, but this is already the case and it is up to userspace to quiesce the CPUs before reading the CPU registers from the GIC for an up-to-date view. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-04-04KVM: arm64: Ensure LRs are clear when they should beChristoffer Dall1-0/+1
We currently have some code to clear the list registers on GICv3, but we never call this code, because the caller got nuked when removing the old vgic. We also used to have a similar GICv2 part, but that got lost in the process too. Let's reintroduce the logic for GICv2 and call the logic when we initialize the use of hypervisors on the CPU, for example when first loading KVM or when exiting a low power state. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Emulate the EL1 phys timer registersJintack Lim1-0/+2
Emulate read and write operations to CNTP_TVAL, CNTP_CVAL and CNTP_CTL. Now VMs are able to use the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Initialize the emulated EL1 physical timerJintack Lim1-1/+2
Initialize the emulated EL1 physical timer with the default irq number. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Add the EL1 physical timer contextJintack Lim1-0/+2
Add the EL1 physical timer context. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Decouple kvm timer functions from virtual timerJintack Lim1-1/+1
Now that we have a separate structure for timer context, make functions generic so that they can work with any timer context, not just the virtual timer context. This does not change the virtual timer functionality. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Move cntvoff to each timer contextJintack Lim1-6/+3
Make cntvoff per each timer context. This is helpful to abstract kvm timer functions to work with timer context without considering timer types (e.g. physical timer or virtual timer). This also would pave the way for ever doing adjustments of the cntvoff on a per-CPU basis if that should ever make sense. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-08KVM: arm/arm64: Abstract virtual timer context into separate structureJintack Lim1-13/+14
Abstract virtual timer context into a separate structure and change all callers referring to timer registers, irq state and so on. No change in functionality. This is about to become very handy when adding the EL1 physical timer. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-30KVM: arm/arm64: vgic: Implement VGICv3 CPU interface accessVijaya Kumar K1-0/+8
VGICv3 CPU interface registers are accessed using KVM_DEV_ARM_VGIC_CPU_SYSREGS ioctl. These registers are accessed as 64-bit. The cpu MPIDR value is passed along with register id. It is used to identify the cpu for registers access. The VM that supports SEIs expect it on destination machine to handle guest aborts and hence checked for ICC_CTLR_EL1.SEIS compatibility. Similarly, VM that supports Affinity Level 3 that is required for AArch64 mode, is required to be supported on destination machine. Hence checked for ICC_CTLR_EL1.A3V compatibility. The arch/arm64/kvm/vgic-sys-reg-v3.c handles read and write of VGIC CPU registers for AArch64. For AArch32 mode, arch/arm/kvm/vgic-v3-coproc.c file is created but APIs are not implemented. Updated arch/arm/include/uapi/asm/kvm.h with new definitions required to compile for AArch32. The version of VGIC v3 specification is defined here Documentation/virtual/kvm/devices/arm-vgic-v3.txt Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-01-25KVM: arm/arm64: vgic: Add debugfs vgic-state fileChristoffer Dall1-0/+5
Add a file to debugfs to read the in-kernel state of the vgic. We don't do any locking of the entire VGIC state while traversing all the IRQs, so if the VM is running the user/developer may not see a quiesced state, but should take care to pause the VM using facilities in user space for that purpose. We also don't support LPIs yet, but they can be added easily if needed. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-25KVM: arm/arm64: Remove struct vgic_irq pending fieldChristoffer Dall1-2/+3
One of the goals behind the VGIC redesign was to get rid of cached or intermediate state in the data structures, but we decided to allow ourselves to precompute the pending value of an IRQ based on the line level and pending latch state. However, this has now become difficult to base proper GICv3 save/restore on, because there is a potential to modify the pending state without knowing if an interrupt is edge or level configured. See the following post and related message for more background: https://lists.cs.columbia.edu/pipermail/kvmarm/2017-January/023195.html This commit gets rid of the precomputed pending field in favor of a function that calculates the value when needed, irq_is_pending(). The soft_pending field is renamed to pending_latch to represent that this latch is the equivalent hardware latch which gets manipulated by the input signal for edge-triggered interrupts and when writing to the SPENDR/CPENDR registers. After this commit save/restore code should be able to simply restore the pending_latch state, line_level state, and config state in any order and get the desired result. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-01-13KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systemsJintack Lim1-0/+1
Current KVM world switch code is unintentionally setting wrong bits to CNTHCTL_EL2 when E2H == 1, which may allow guest OS to access physical timer. Bit positions of CNTHCTL_EL2 are changing depending on HCR_EL2.E2H bit. EL1PCEN and EL1PCTEN are 1st and 0th bits when E2H is not set, but they are 11th and 10th bits respectively when E2H is set. In fact, on VHE we only need to set those bits once, not for every world switch. This is because the host kernel runs in EL2 with HCR_EL2.TGE == 1, which makes those bits have no effect for the host kernel execution. So we just set those bits once for guests, and that's it. Signed-off-by: Jintack Lim <jintack@cs.columbia.edu> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-2/+2
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-09-22ARM: KVM: Support vgic-v3Vladimir Murzin1-8/+0
This patch allows to build and use vgic-v3 in 32-bit mode. Unfortunately, it can not be split in several steps without extra stubs to keep patches independent and bisectable. For instance, virt/kvm/arm/vgic/vgic-v3.c uses function from vgic-v3-sr.c, handling access to GICv3 cpu interface from the guest requires vgic_v3.vgic_sre to be already defined. It is how support has been done: * handle SGI requests from the guest * report configured SRE on access to GICv3 cpu interface from the guest * required vgic-v3 macros are provided via uapi.h * static keys are used to select GIC backend * to make vgic-v3 build KVM_ARM_VGIC_V3 guard is removed along with the static inlines Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-22arm64: KVM: Use static keys for selecting the GIC backendVladimir Murzin1-0/+4
Currently GIC backend is selected via alternative framework and this is fine. We are going to introduce vgic-v3 to 32-bit world and there we don't have patching framework in hand, so we can either check support for GICv3 every time we need to choose which backend to use or try to optimise it by using static keys. The later looks quite promising because we can share logic involved in selecting GIC backend between architectures if both uses static keys. This patch moves arm64 from alternative to static keys framework for selecting GIC backend. For that we embed static key into vgic_global and enable the key during vgic initialisation based on what has already been exposed by the host GIC driver. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: vgic-v2: Add GICV access from HYPMarc Zyngier1-0/+3
Now that we have the necessary infrastructure to handle MMIO accesses in HYP, perform the GICV access on behalf of the guest. This requires checking that the access is strictly 32bit, properly aligned, and falls within the expected range. When all condition are satisfied, we perform the access and tell the rest of the HYP code that the instruction has been correctly emulated. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-09-08arm64: KVM: vgic-v2: Add the GICV emulation infrastructureMarc Zyngier1-0/+3
In order to efficiently perform the GICV access on behalf of the guest, we need to be able to avoid going back all the way to the host kernel. For this, we introduce a new hook in the world switch code, conveniently placed just after populating the fault info. At that point, we only have saved/restored the GP registers, and we can quickly perform all the required checks (data abort, translation fault, valid faulting syndrome, not an external abort, not a PTW). Coming back from the emulation code, we need to skip the emulated instruction. This involves an additional bit of save/restore in order to be able to access the guest's PC (and possibly CPSR if this is a 32bit guest). At this stage, no emulation code is provided. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-08-04Merge tag 'kvm-arm-for-4.8-take2' of ↵Paolo Bonzini1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.8 - Take 2 Includes GSI routing support to go along with the new VGIC and a small fix that has been cooking in -next for a while.