summaryrefslogtreecommitdiff
path: root/include/linux/drbd_genl.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30drbd: new disk-option disable-write-sameLars Ellenberg1-1/+2
Some backend devices claim to support write-same, but would fail actual write-same requests. Allow to set (or toggle) whether or not DRBD tries to support write-same. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2016-10-27genetlink: statically initialize familiesJohannes Berg1-1/+1
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14drbd: when receiving P_TRIM, zero-out partial unaligned chunksLars Ellenberg1-0/+1
We can avoid spurious data divergence caused by partially-ignored discards on certain backends with discard_zeroes_data=0, if we translate partial unaligned discard requests into explicit zero-out. The relevant use case is LVM/DM thin. If on different nodes, DRBD is backed by devices with differing discard characteristics, discards may lead to data divergence (old data or garbage left over on one backend, zeroes due to unmapped areas on the other backend). Online verify would now potentially report tons of spurious differences. While probably harmless for most use cases (fstrim on a file system), DRBD cannot have that, it would violate our promise to upper layers that our data instances on the nodes are identical. To be correct and play safe (make sure data is identical on both copies), we would have to disable discard support, if our local backend (on a Primary) does not support "discard_zeroes_data=true". We'd also have to translate discards to explicit zero-out on the receiving (typically: Secondary) side, unless the receiving side supports "discard_zeroes_data=true". Which both would allocate those blocks, instead of unmapping them, in contrast with expectations. LVM/DM thin does set discard_zeroes_data=0, because it silently ignores discards to partial chunks. We can work around this by checking the alignment first. For unaligned (wrt. alignment and granularity) or too small discards, we zero-out the initial (and/or) trailing unaligned partial chunks, but discard all the aligned full chunks. At least for LVM/DM thin, the result is effectively "discard_zeroes_data=1". Arguably it should behave this way internally, by default, and we'll try to make that happen. But our workaround is still valid for already deployed setups, and for other devices that may behave this way. Setting discard-zeroes-if-aligned=yes will allow DRBD to use discards, and to announce discard_zeroes_data=true, even on backends that announce discard_zeroes_data=false. Setting discard-zeroes-if-aligned=no will cause DRBD to always fall-back to zero-out on the receiving side, and to not even announce discard capabilities on the Primary, if the respective backend announces discard_zeroes_data=false. We used to ignore the discard_zeroes_data setting completely. To not break established and expected behaviour, and suddenly cause fstrim on thin-provisioned LVs to run out-of-space, instead of freeing up space, the default value is "yes". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-14drbd: Introduce new disk config option rs-discard-granularityPhilipp Reisner1-3/+3
As long as the value is 0 the feature is disabled. With setting it to a positive value, DRBD limits and aligns its resync requests to the rs-discard-granularity setting. If the sync source detects all zeros in such a block, the resync target discards the range on disk. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: Backport the "status" commandAndreas Gruenbacher1-0/+35
The status command originates the drbd9 code base. While for now we keep the status information in /proc/drbd available, this commit allows the user base to gracefully migrate their monitoring infrastructure to the new status reporting interface. In drbd9 no status information is exposed through /proc/drbd. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25drbd: Backport the "events2" commandAndreas Gruenbacher1-0/+114
The events2 command originates from drbd-9 development. It features more information but requires a incompatible change in output format. Therefore the previous events command continues to exist, the new improved events2 command becomes available now. This prepares the user-base for a later switch to the complete drbd9 code base. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-10drbd: New net configuration option socket-check-timeoutPhilipp Reisner1-0/+1
In setups involving a DRBD-proxy and connections that experience a lot of buffer-bloat it might be necessary to set ping-timeout to an unusual high value. By default DRBD uses the same value to wait if a newly established TCP-connection is stable. Since the DRBD-proxy is usually located in the same data center such a long wait time may hinder DRBD's connect process. In such setups socket-check-timeout should be set to at least to the round trip time between DRBD and DRBD-proxy. I.e. in most cases to 1. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10drbd: implement csums-after-crash-onlyLars Ellenberg1-0/+3
Checksum based resync trades CPU cycles for network bandwidth, in situations where we expect much of the to-be-resynced blocks to be actually identical on both sides already. In a "network hickup" scenario, it won't help: all to-be-resynced blocks will typically be different. The use case is for the resync of *potentially* different blocks after crash recovery -- the crash recovery had marked larger areas (those covered by the activity log) as need-to-be-resynced, just in case. Most of those blocks will be identical. This option makes it possible to configure checksum based resync, but only actually use it for the first resync after primary crash. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-02-17drbd: Define the size of res_opts->cpu_mask in a single placeAndreas Gruenbacher1-1/+1
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17drbd: Improve some function and variable namingAndreas Gruenbacher1-2/+2
Rename functions conn_destroy() -> drbd_destroy_connection(), drbd_minor_destroy() -> drbd_destroy_device() drbd_adm_add_minor() -> drbd_adm_add_minor() drbd_adm_delete_minor() -> drbd_adm_del_minor() Rename global variable minors to drbd_devices Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2013-06-28drbd: Allow online change of al-stripes and al-stripe-sizePhilipp Reisner1-0/+2
Allow to change the AL layout with an resize operation. For that the reisze command gets two new fields: al_stripes and al_stripe_size. In order to make the operation crash save: 1) Lock out all IO and MD-IO 2) Write the super block with MDF_PRIMARY_IND clear 3) write the bitmap to the new location (all zeros, since we allow only while connected) 4) Initialize the new AL-area 5) Write the super block with the restored MDF_PRIMARY_IND. 6) Unfreeze all IO Since the AL-layout has no influence on the protocol, this operation needs to be beforemed on both sides of a resource (if intended). Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-09drbd: pass some more information to userspace.Philipp Marek1-0/+10
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-09drbd: introduce stop-sector to online verifyLars Ellenberg1-0/+1
We now can schedule only a specific range of sectors for online verify, or interrupt a running verify without interrupting the connection. Had to bump the protocol version differently, we are now 101. Added verify_can_do_stop_sector() { protocol >= 97 && protocol != 100; } Also, the return value convention for worker callbacks has changed, we returned "true/false" for "keep the connection up" in 8.3, we return 0 for success and <= for failure in 8.4. Affected: receive_state() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: New disk option al-updatesPhilipp Reisner1-0/+3
By disabling al-updates one might increase performace. The price for that is that in case a crashed primary (that had al-updates disabled) is reintegraded, it will receive a full-resync instead of a bitmap based resync. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Load balancing of read requestsPhilipp Reisner1-0/+1
New config option for the disk secition "read-balancing", with the values: prefer-local, prefer-remote, round-robin, when-congested-remote. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: detach from frozen backing devicePhilipp Reisner1-1/+8
* drbd-8.3: documentation: Documented detach's --force and disk's --disk-timeout drbd: Implemented the disk-timeout option drbd: Force flag for the detach operation drbd: Allow new IOs while the local disk in in FAILED state drbd: Bitmap IO functions can not return prematurely if the disk breaks drbd: Added a kref to bm_aio_ctx drbd: Hold a reference to ldev while doing meta-data IO drbd: Keep a reference to the bio until the completion handler finished drbd: Implemented wait_until_done_or_disk_failure() drbd: Replaced md_io_mutex by an atomic: md_io_in_use drbd: moved md_io into mdev drbd: Immediately allow completion of IOs, that wait for IO completions on a failed disk drbd: Keep a reference to barrier acked requests Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename --dry-run to --tentativeAndreas Gruenbacher1-1/+1
drbdadm already has a --dry-run option, so this option cannot directly be passed through to drbdsetup. Rename the drbdsetup option to resolve this conflict. For backward compatibility, make --dry-run an alias of --tentative. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Convert the generic netlink interface to accept connection endpointsAndreas Gruenbacher1-31/+31
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Also need to check for DRBD_GENLA_F_MANDATORY flags before ↵Andreas Gruenbacher1-1/+1
nla_find_nested() This is done by introducing drbd_nla_find_nested() which handles the flag before calling nla_find_nested(). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Use the terminology suggested by the command names in the source code ↵Andreas Gruenbacher1-13/+4
and messages Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Make drbd's use of netlink attribute flags less confusingAndreas Gruenbacher1-122/+122
Make it more clear in the flag names which flags are internal to drbd, and which are not. The check for mandatory attributes is the only extension visible at the netlink layer. Attributes with this flag set would look like unknown attributes to some kernel versions. The netlink layer would ignore them and also skip consistency checks on the attribute type and legth. To avoid this, we check for mandatory attributes first, remove the mandatory flag, and then process the attributes normally. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Convert resync-after into a signed netlink fieldAndreas Gruenbacher1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix the upper limit of resync-afterAndreas Gruenbacher1-1/+1
The 32-bit resync_after netlink field takes a device minor number as parameter, which is no longer limited to 255. We cannot statically verify which device numbers are valid, so set the ummer limit to the highest possible signed 32-bit integer. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refer to connect-int consistently throughout the codeAndreas Gruenbacher1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Refer to resync-rate consistently throughout the codeAndreas Gruenbacher1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Rename the want_lose field/flag to discard_my_dataAndreas Gruenbacher1-1/+1
This is what it is called in config files and on the command line as well. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Also define the default values of boolean flags in a single placeAndreas Gruenbacher1-8/+8
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-tcp-cork into tcp-cork={yes|no}Andreas Gruenbacher1-1/+1
Change the --no-tcp-cork drbdsetup command line option as well as the no_cork netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-md-flushes into md-flushes={yes|no}Andreas Gruenbacher1-1/+1
Change the --no-md-flushes drbdsetup command line option as well as the no_md_flush netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-disk-drain into disk-drain={yes|no}Andreas Gruenbacher1-1/+1
Change the --no-disk-drain drbdsetup command line option as well as the no_disk_drain netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Turn no-disk-flushes into disk-flushes={yes|no}Andreas Gruenbacher1-2/+2
Change the --no-disk-flushes drbdsetup command line option as well as the no_disk_flush netlink packet. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce __s32_field in the genetlink macro magicLars Ellenberg1-1/+1
...and drop explicit typecasts (int)meta_dev_idx < 0. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Generate the drbd_set_*_defaults() functions from drbd_genl.hAndreas Gruenbacher1-46/+45
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Introduce protocol version 100 headersAndreas Gruenbacher1-2/+0
The 8 byte header finally becomes too small. With the protocol 100 header we have 16 bit for the volume number, proper 32 bit for the data length, and 32 bit for further extensions in the future. Previous versions of drbd are using version 80 headers for all packets short enough for protocol 80. They support both header versions in worker context, but only version 80 headers in asynchronous context. For backwards compatibility, continue to use version 80 headers for short packets before protocol version 100. From protocol version 100 on, use the same header version for all packets. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: distribute former syncer_conf settings to disk, connection, and ↵Lars Ellenberg1-58/+75
resource level This commit breaks the API again. Move per-volume former syncer options into disk_conf. Move per-connection former syncer options into net_conf. Renamed the remainign sync_conf to res_opts Syncer settings have been changeable at runtime, so we need to prepare for these settings to be runtime-changeable in their new home as well. Introduce new configuration operations, and share the netlink attribute between "attach" (create new disk) and "disk-opts" (change options). Same for "connect" and "net-opts". Some fields cannot be changed at runtime, however. Introduce a new flag GENLA_F_INVARIANT to be able to trigger on that in the generated validation and assignment functions. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-04drbd: introduce in-kernel "down" commandLars Ellenberg1-0/+2
This greatly simplifies deconfiguration of whole resources. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-10-14drbd: prepare the transition from connector to genetlinkLars Ellenberg1-0/+349
This adds the new API header and helper files. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>