summaryrefslogtreecommitdiff
path: root/include/linux/ieee80211.h
AgeCommit message (Collapse)AuthorFilesLines
2011-07-20ieee80211: add few wmm tspec valuesKalle Valo1-0/+37
These are needed by ath6kl for parsing tspec status from an IE. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-27wireless: unify QoS control field definitionsJohannes Berg1-5/+13
Move all that mac80211 has into the generic ieee80211.h header file and use them. At the same time move them from mask+shift to just bits and rename them for consistent names. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01cfg80211: don't drop p2p probe responsesEliad Peller1-2/+6
Commit 0a35d36 ("cfg80211: Use capability info to detect mesh beacons") assumed that probe response with both ESS and IBSS bits cleared means that the frame was sent by a mesh sta. However, these capabilities are also being used in the p2p_find phase, and the mesh-validation broke it. Rename the WLAN_CAPABILITY_IS_MBSS macro, and verify that mesh ies exist before assuming this frame was sent by a mesh sta. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Self-protected management frames are not robustThomas Pedersen1-0/+1
They may contain encrypted information elements (as AMPE frames do) but they are not encrypted. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11cfg80211: Use capability info to detect mesh beacons.Javier Cardona1-0/+5
Mesh beacons no longer use all-zeroes BSSID. Beacon frames for MBSS, infrastructure BSS, or IBSS are differentiated by the Capability Information field in the Beacon frame. A mesh STA sets the ESS and IBSS subfields to 0 in transmitted Beacon or Probe Response management frames. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: Drop MESH_PLINK category and use new ANA-approved MESH_ACTIONJavier Cardona1-3/+2
Note: This breaks compatibility with previous mesh protocol instances. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-05ieee80211: add HT extended capabilities masksBing Zhao1-0/+9
IEEE Std 802.11n, Oct. 29, 2009: 7.3.2.56.5 HT Extended Capabilities field Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-10ieee80211: add IEEE80211_COUNTRY_STRING_LEN definitionBing Zhao1-0/+3
and make use of it in wireless drivers Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-13ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macroAmitkumar Karwar1-1/+1
It is defined in include/linux/ieee80211.h. As per IEEE spec. bit6 to bit15 in block ack parameter represents buffer size. So the bitmask should be 0xFFC0. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Cc: stable@kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20mac80211: Remove unused third address from mesh address extension header.Javier Cardona1-1/+0
The Mesh Control header only includes 0, 1 or 2 addresses. If there is one address, it should be interpreted as Address 4. If there are 2, they are interpreted as Addresses 5 and 6 (Address 4 being the 4th address in the 802.11 header). The address extension used to hold up to 3 addresses instead of the current 2. I'm not sure which draft version changed this, but it is very unlikely that it will change again given the state of the approval process of this draft. See section 7.1.3.6.3 in current draft (8.0). Also, note that the extra address that I'm removing was not being used, so this change has no effect on over-the-air frame formats. But I thought I better remove it before someone does start using it. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-20mac80211: Let userspace enable and configure vendor specific path selection.Javier Cardona1-0/+25
Userspace will now be allowed to toggle between the default path selection algorithm (HWMP, implemented in the kernel), and a vendor specific alternative. Also in the same patch, allow userspace to add information elements to mesh beacons. This is accordance with the Extensible Path Selection Framework specified in version 7.0 of the 802.11s draft. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13ieee80211: add Parameter Set Count bitmaskBing Zhao1-0/+1
WMM IE QoS Info field lower 4 bits: Parameter Set Count Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-08cfg80211: add some element IDs in enum ieee80211_eidAmitkumar Karwar1-0/+3
1)WLAN_EID_BSS_COEX_2040 2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM 3)WLAN_EID_EXT_CAPABILITY Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11mac80211: Update mesh constants to approved IEEE ANA valuesSteve deRosier1-15/+56
This patch updates IEEE802.11 mesh constants to be consistent with newly approved values. It modifies some values, as well as adds many new constants in preparation for updating mesh code to the current 802.11s drafts. ANA numbers were taken from: https://mentor.ieee.org/802.11/dcn/09/11-09-0031-12-0000-ana-database-assigned-number-authority.xls A few notes are in order: 1. This will break backwards compatibility with existing Linux kernels as over-the-air constants have changed. 2. Some old and obsolete constants have been retained for now as the mesh code itself hasn't been updated yet to the new 802.11s draft. This was desired to keep the existing mesh scheme working until it can be updated. Adding the approved values is the first step in updating the mesh code. 3. Obsolete constants have been clearly marked. 4. All ANA approved 802.11s constants have been added. Signed-off-by: Steve deRosier <steve@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: add flags for STBC (Space-Time Block Coding)Felix Fietkau1-0/+1
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211: Moved mesh action codes to a more visible locationJavier Cardona1-0/+2
Grouped mesh action codes together with the other action codes in ieee80211.h. Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: clean up/fix aggregation codeJohannes Berg1-1/+0
The aggregation code has a number of quirks, like inventing an unneeded WLAN_BACK_TIMER value and leaking memory under certain circumstances during station destruction. Fix these issues by using the regular aggregation session teardown code and blocking new aggregation sessions, all before the station is really destructed. As a side effect, this gets rid of the long code block to destroy aggregation safely. Additionally, rename tid_state_rx which can only have the values IDLE and OPERATIONAL to tid_active_rx to make it easier to understand that there is no bitwise stuff going on on the RX side -- the TX side remains because it needs to keep track of the driver and peer states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-23mac80211: Account HT Control field in Data frame hdrlen according to ↵Andriy Tkachuk1-0/+2
802.11n-2009 ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by: Andriy V. Tkachuk <andrit@ukr.net> Acked-by : Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ieee80211: add struct ieee80211_hdr_qosKalle Valo1-0/+10
The header can be used to create qos nullfunc frames, for example. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: add U-APSD client supportKalle Valo1-0/+18
Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The idea is that the data frames from the client trigger AP to send the buffered frames with ACs which have U-APSD enabled. This decreases latency and makes it possible to save even more power. Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current implementation assumes that firmware takes care of the wakeup and hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported. Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running various test traffic with ping. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mac80211: add functions to create PS Poll and Nullfunc templatesKalle Valo1-0/+9
Some hardware, for example wl1251 and wl1271, handle the transmission of power save related frames in hardware, but the driver is responsible for creating the templates. It's better to create the templates in mac80211, that way all drivers can benefit from this. Add two new functions, ieee80211_pspoll_get() and ieee80211_nullfunc_get() which drivers need to call to get the frame. Drivers are also responsible for updating the templates after each association. Also new struct ieee80211_hdr_3addr is added to ieee80211.h to make it easy to calculate length of the Nullfunc frame. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-29mac80211: split up and insert custom IEs correctlyJohannes Berg1-9/+30
Currently, we insert all user-specified IEs before the HT IE for association, and after the HT IE for probe requests. For association, that's correct only if the user-specified IEs are RSN only, incorrect in all other cases including WPA. Change this to split apart the user-specified IEs in two places for association: before the HT IE (e.g. RSN), after the HT IE (generally empty right now I think?) and after WMM (all other vendor-specific IEs). For probes, split the IEs in different places to be correct according to the spec. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville1-1/+1
2009-12-22mac80211: only bother printing highest data rate on debugfs if its setLuis R. Rodriguez1-1/+4
IEEE-802.11n spec says the RX highest data rate field does not specify the highest supported RX data rate if its not set. Ignore it if not set then. Refer to section 7.3.56.4 Cc: johannes@sipsolutions.net Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-22mac80211: enable spatial multiplexing powersaveJohannes Berg1-1/+24
Enable spatial multiplexing in mac80211 by telling the driver what to do and, where necessary, sending action frames to the AP to update the requested SMPS mode. Also includes a trivial implementation for hwsim that just logs the requested mode. For now, the userspace interface is in debugfs only, and let you toggle the requested mode at any time. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-21mac80211: fix peer HT capabilitiesJohannes Berg1-1/+1
I noticed yesterday, because Jeff had noticed a speed regression, cf. bug http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2138 that the SM PS settings for peers were wrong. Instead of overwriting the SM PS settings with the local bits, we need to keep the remote bits. The bug was part of the original HT code from over two years ago, but unfortunately nobody noticed that it makes no sense -- we shouldn't be overwriting the peer's setting with our own but rather keep it intact when masking the peer capabilities with our own. While fixing that, I noticed that the masking of capabilities is completely useless for most of the bits, so also fix those other bits. Finally, I also noticed that PSMP_SUPPORT no longer exists in the final 802.11n version, so also remove that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-28nl80211: PMKSA caching supportSamuel Ortiz1-0/+2
This is an interface to set, delete and flush PMKIDs through nl80211. Main users would be fullmac devices which firmwares are capable of generating the RSN IEs for the re-association requests, e.g. iwmc3200wifi. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19mac80211: use a structure to hold the mesh config information elementRui Paulo1-1/+15
Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-14mac80211: implement RANN processing and forwardingRui Paulo1-0/+15
Process the RANN (Root Annoucement) Frame and try to find the HWMP root station by sending a PREQ. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-11mac80211: update meshconf IERui Paulo1-1/+1
This updates the Mesh Configuration IE according to the latest draft (3.03). Notable changes include the simplified protocol IDs. Signed-off-by: Rui Paulo <rpaulo@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Andrey Yurovsky <andrey@cozybit.com> Tested-by: Brian Cavagnolo <brian@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30mac80211: also drop qos-nullfunc frames silentlyJohannes Berg1-1/+11
We drop nullfunc frames, but not qos-nullfunc frames, even though those could be used for PS state control as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28mac80211: Update mesh config IE to 11s draft 3.02Javier Cardona1-1/+1
The mesh config information element has changed significantly since draft 1.08 This patch brings it up to date. Thanks to Sam Leffler and Rui Paulo for identifying this. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27mac80211: Add a few 802.11n defines for AMPDU parametersSujith1-0/+25
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wireless: define AKM suitesJohannes Berg1-0/+4
We'll need these values for some drivers using connect API and for wext compat code, so let's define them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03cfg80211: use key size constantsJohannes Berg1-0/+1
Instead of hardcoding the key length for validation, use the constants Zhu Yi recently added and add one for AES_CMAC too. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-22wireless: move some utility functions from mac80211 to cfg80211Zhu Yi1-0/+9
The patch moves some utility functions from mac80211 to cfg80211. Because these functions are doing generic 802.11 operations so they are not mac80211 specific. The moving allows some fullmac drivers to be also benefit from these utility functions. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11mac80211: Robust Action frame categories for MFPJouni Malinen1-1/+7
IEEE 802.11w/D9.0 introduces a mechanism for Action field Category values to be used to select which Action frames are Robust. Public and Vendor-specific categories are marked as not Robust in IEEE 802.11w; HT will be marked not Robust in IEEE 802.11n. A new Vendor-specific Protected category is allocated for Robust vendor-specific Action frames. Another new category, Protected Dual of Action, is introduced for protecting some existing Public Action frames (e.g., IEEE 802.11y protected enablement). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06mac80211: Update SA Query transaction id lengthJouni Malinen1-1/+1
IEEE 802.11w/D8.0 changed the length of the SA Query transaction identifier from 16 to 2 octets. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-23mac80211: validate TIM IE length (redux)Johannes Berg1-1/+31
The TIM IE must not be shorter than 4 bytes, so verify that when parsing it and use the proper type. To ease that adjust struct ieee80211_tim_ie to have a virtual bitmap of size at least 1. Also check that the TIM IE is actually present before trying to parse it! Because other people may need the function, make it a static inline in ieee80211.h. (The original "mac80211: validate TIM IE length" was a minimal fix for 2.6.30. This purports to be the full, correct fix. -- JWL) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-23mac80211: disable powersave if pm_qos asks for low latencyJohannes Berg1-0/+9
When an application asks for a latency lower than the beacon interval there's nothing we can do -- we need to stay awake and not have the AP buffer frames for us. Add code to automatically calculate this constraint in mac80211 so drivers need not concern themselves with it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-28nl80211: Add MLME primitives to support external SMEJouni Malinen1-0/+1
This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-28ieee80211: document DS bit usageJohannes Berg1-0/+16
I keep needing this because I'm too stupid to remember it. Everybody else can probably remember, but who knows :) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: Fix MFP Association Comeback to use Timeout Interval IEJouni Malinen1-1/+7
The separate Association Comeback Time IE was removed from IEEE 802.11w and the Timeout Interval IE (from IEEE 802.11r) is used instead. The editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but still, the use of Timeout Interval IE is the expected mechanism. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: 802.11w - Implement Association Comeback processingJouni Malinen1-0/+4
When MFP is enabled, the AP does not allow a STA to associate if an existing security association exists without first going through SA Query process. When this happens, the association request is denied with a new status code ("temporarily rejected") ans Association Comeback IE is used to notify when the association may be tried again (i.e., when the SA Query procedure has timed out). Use the comeback time to update the mac80211 client MLME timer for next association attempt to minimize waiting time if association is temporarily rejected. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: 802.11w - SA Query processingJouni Malinen1-0/+14
Process SA Query Requests for client mode in mac80211. AP side processing of SA Query Response frames is in user space (hostapd). Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen1-0/+1
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: 802.11w - Add BIP (AES-128-CMAC)Jouni Malinen1-0/+10
Implement Broadcast/Multicast Integrity Protocol for management frame protection. This patch adds the needed definitions for the new information element (MMIE) and implementation for the new "encryption" type (though, BIP is actually not encrypting data, it provides only integrity protection). These routines will be used by a follow-on patch that enables BIP for multicast/broadcast robust management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: 802.11w - CCMP for management framesJouni Malinen1-0/+30
Extend CCMP to support encryption and decryption of unicast management frames. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29wireless: Add channel/frequency conversions to ieee80211.hDavid Kilroy1-0/+116
Added mappings for FHSS, DSSS and OFDM channels - with macros to point HR DSSS and ERP to the DSSS mappings. Currently just static inline functions. Use the new functions in the older fullmac drivers. This eliminates a number of const static buffers and removes a couple of range checks that are now redundant. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Richard Farina <sidhayn@gmail.com> Acked-by: Jeroen Vreeken <pe1rxq@amsat.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12wireless: Incorrect LEAP authentication algorithm identifier.Senthil Balasubramanian1-1/+1
This patch fixes a regression introduced by "wireless: avoid some net/ieee80211.h vs. linux/ieee80211.h conflicts" LEAP authentication algorithm identifier should be 128. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>