summaryrefslogtreecommitdiff
path: root/include/linux/phy
AgeCommit message (Collapse)AuthorFilesLines
2021-07-06Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
2021-06-14phy: core: Reword the comment specifying the units of max_link_rate to be MbpsAswath Govindraju1-1/+1
In some subsystems (eg. CAN, SPI), the max link rate supported can be less than 1 Mbps and if the unit for max_link_rate is Mbps then it can't be used. Therefore, leave the decision of units to be used, to the producer and consumer. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210510051006.11393-2-a-govindraju@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03phy: tegra: xusb: Add sleepwalk and suspend/resumeJC Kuo1-1/+9
This commit adds sleepwalk/wake and suspend/resume interfaces to Tegra XUSB PHY driver. Tegra XUSB host controller driver makes use of sleepwalk functions to enable/disable sleepwalk circuit which is in always-on partition and can respond to USB resume signals when controller is not powered. Sleepwalk can be enabled/disabled for any USB UPHY individually. - tegra_xusb_padctl_enable_phy_sleepwalk() - tegra_xusb_padctl_disable_phy_sleepwalk() Tegra XUSB host controller driver makes use of wake functions to enable/disable/query wake circuit which is in always-on partition can wake system up when USB resume happens. Wake circuit can be enabled/disabled for any USB PHY individually. - tegra_xusb_padctl_enable_phy_wake() - tegra_xusb_padctl_disable_phy_wake() - tegra_xusb_padctl_remote_wake_detected() This commit also adds two system suspend stubs that can be used to save and restore XUSB PADCTL context during system suspend and resume. - tegra_xusb_padctl_suspend_noirq() - tegra_xusb_padctl_resume_noirq() Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-03-17phy: Add media type and speed serdes configuration interfacesSteen Hegelund1-0/+26
Provide new phy configuration interfaces for media type and speed that allows e.g. PHYs used for ethernet to be configured with this information. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20210218161451.3489955-3-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: Add new PHY attribute max_link_rateSwapnil Jakhade1-0/+2
Add new PHY attribute max_link_rate to struct phy_attrs. This indicates maximum link rate supported by PHY (in Mbps). Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1599805114-22063-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-18phy: omap-usb2: Clean up exported headerRoger Quadros1-67/+2
Move private definitions from header to phy-omap-usb2.c file. Get rid of unused data structures usb_dpll_params and omap_usb_phy_type. Signed-off-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20200515080518.26870-2-rogerq@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-19phy: tegra: xusb: Add support to get companion USB 3 portNagarjuna Kristam1-0/+2
Tegra XUSB host, device mode driver requires the USB 3 companion port number for corresponding USB 2 port. Add API to retrieve the same. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Reviewed-by: JC Kuo <jckuo@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-01-14phy: Add DisplayPort configuration optionsYuti Amonkar2-0/+100
Allow DisplayPort PHYs to be configured through the generic functions through a custom structure added to the generic union. The configuration structure is used for reconfiguration of DisplayPort PHYs during link training operation. The parameters added here are the ones defined in the DisplayPort spec v1.4 which include link rate, number of lanes, voltage swing and pre-emphasis. Add the DisplayPort phy mode to the generic phy_mode enum. Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08phy: core: Add consumer device link supportAlexandre Torgue1-2/+7
In order to enforce suspend/resume ordering, this commit creates link between phy consumers and phy devices. This link avoids to suspend phy before phy consumers. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> [jonathanh@nvidia.com: Fix an abort when of_phy_get() returns error] Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-31phy: add PHY_MODE_LVDSHeiko Stuebner1-1/+2
There are combo phys out there that can be switched between doing dsi and lvds. So add a mode definition for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23phy: tegra: xusb: Add vbus override support on Tegra210Nagarjuna Kristam1-1/+3
Tegra XUSB device control driver needs to control vbus override during its operations, add API for the support. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner2-22/+2
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHYKishon Vijay Abraham I1-0/+2
Add a new phy_ops *release* invoked when the consumer relinquishes the PHY using phy_put/devm_phy_put. The initializations done by the PHY driver in of_xlate call back can be can be cleaned up here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: dphy: Clarify lanes parameter documentationMaxime Ripard1-1/+2
The lanes parameter is not solely about the number of lanes, but it also carries the fact that those are the first lanes in use during the transmission. It was implicit so far, so make sure it's explicit now. Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: dphy: Change units of wakeup and init parametersMaxime Ripard1-4/+4
The Init and wakeup D-PHY parameters are in the micro/milliseconds range, putting the values real close to the types limits if they were in picoseconds. Move them to microseconds which should be better fit. Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-02-07phy: dphy: Remove unused headerMaxime Ripard1-2/+0
The videomode.h header inclusion is an artifact from the patches development, remove it. Suggested-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-16phy: fix build breakage: add PHY_MODE_SATAJohn Hubbard1-0/+1
Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses the PHY_MODE_SATA, but that enum had not yet been added. This caused a build failure for me, with today's linux.git. Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding in the Marvell Berlin SATA PHY driver. Fix the build by: 1) Renaming Marvell's defined value to a more scoped name, in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. 2) Adding the missing enum, which was going to be added anyway as part of [1]. [1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2018-12-28include/linux/phy/phy.h: fix minor kerneldoc errorsRobert P. J. Day1-1/+1
Correct two minor kerneldoc errors: 1) missing reference to @mode in struct phy_ops 2) obsolete reference to @init_data in struct_phy_attrs, removed in dbc98635e0d42f0e62ea92813df1e0e4c90f8375 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12phy: dphy: Add configuration helpersMaxime Ripard1-0/+6
The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add MIPI D-PHY configuration optionsMaxime Ripard2-0/+285
Now that we have some infrastructure for it, allow the MIPI D-PHY phy's to be configured through the generic functions through a custom structure added to the generic union. The parameters added here are the ones defined in the MIPI D-PHY spec, plus the number of lanes in use. The current set of parameters should cover all the potential users. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add configuration interfaceMaxime Ripard1-0/+58
The phy framework is only allowing to configure the power state of the PHY using the init and power_on hooks, and their power_off and exit counterparts. While it works for most, simple, PHYs supported so far, some more advanced PHYs need some configuration depending on runtime parameters. These PHYs have been supported by a number of means already, often by using ad-hoc drivers in their consumer drivers. That doesn't work too well however, when a consumer device needs to deal with multiple PHYs, or when multiple consumers need to deal with the same PHY (a DSI driver and a CSI driver for example). So we'll add a new interface, through two funtions, phy_validate and phy_configure. The first one will allow to check that a current configuration, for a given mode, is applicable. It will also allow the PHY driver to tune the settings given as parameters as it sees fit. phy_configure will actually apply that configuration in the phy itself. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: Add MIPI D-PHY modeMaxime Ripard1-0/+1
MIPI D-PHY is a MIPI standard meant mostly for display and cameras in embedded systems. Add a mode for it. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: clean up unused ethernet specific phy modesGrygorii Strashko1-4/+0
After recent changes PHY_MODE_SGMII, PHY_MODE_2500SGMII, PHY_MODE_QSGMII, PHY_MODE_10GKR are not used any more and can be removed. Hence - remove them. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: add PHY_MODE_ETHERNETGrygorii Strashko1-0/+1
Add new PHY's mode to be used by Ethernet PHY interface drivers or multipurpose PHYs like serdes. It will be reused in further changes. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: core: rework phy_set_mode to accept phy mode and submodeGrygorii Strashko1-3/+10
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-10-26Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds1-38/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
2018-10-06phy: add QSGMII and PCIE modesQuentin Schulz1-0/+2
Prepare for upcoming phys that'll handle QSGMII or PCIe. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from hostVivek Gautam1-24/+0
The host makes direct calls into phy using ufs_qcom_phy_*() APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy which is not being used by any architecture as yet. Future architectures too are not going to use 20nm ufs phy. So remove these ufs_qcom_phy_*() calls from host to let further change declare the 20nm phy as broken. Also remove couple of stale enum defines for ufs phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-26phy: qcom-ufs: Remove stale methods that handle ref clkVivek Gautam1-14/+0
Remove ufs_qcom_phy_enable/(disable)_dev_ref_clk() that are not being used by any code. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-17phy: add 2.5G SGMII mode to the phy_mode enumAntoine Tenart1-0/+1
This patch adds one more generic PHY mode to the phy_mode enum, to allow configuring generic PHYs to the 2.5G SGMII mode by using the set_mode callback. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08phy: fix structure documentationDov Levenglick1-2/+11
Add missing documentation of structure members and modify the order of documentation to match that of the structure declaration. Signed-off-by: Dov Levenglick <dov.levenglick@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-08phy: Add USB speed related PHY modesManu Gautam1-0/+18
Add following USB speed related PHY modes: LS (Low Speed), FS (Full Speed), HS (High Speed), SS (Super Speed) Speed related information is required by some QCOM PHY drivers to program PHY monitor resume/remote-wakeup events in suspended state. Speed is needed in order to set correct polarity of wakeup events for detection. E.g. QUSB2 PHY monitors DP/DM line state depending on whether speed is LS or FS/HS to detect resume. Similarly QMP USB3 PHY in SS mode should monitor RX terminations attach/detach and LFPS events depending on SSPHY is active or not. Signed-off-by: Manu Gautam <mgautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-11-14Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23drivers: phy: add calibrate methodAndrzej Pietrasiewicz1-0/+10
Some quirky UDCs (like dwc3 on Exynos) need to have their phys calibrated e.g. for using super speed. This patch adds a new phy_calibrate() method. When the calibration should be used is dependent on actual chip. In case of dwc3 on Exynos the calibration must happen after usb_add_hcd() (while in host mode), because certain phy parameters like Tx LOS levels and boost levels need to be calibrated further post initialization of xHCI controller, to get SuperSpeed operations working. But an hcd must be prepared first in order to pass it to usb_add_hcd(), so, in particular, dwc3 registers must be available first, and in order for the latter to happen the phys must be initialized. This poses a chicken and egg problem if the calibration were to be performed in phy_init(). To break the circular dependency a separate method is added which can be called at a desired moment after phy intialization. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23ufs/phy: qcom: Refactor to use phy_init callVivek Gautam1-3/+0
Refactor ufs_qcom_power_up_sequence() to get rid of ugly exported phy APIs and use the phy_init() and phy_power_on() to do the phy initialization. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: Add UFS PHY modesVivek Gautam1-0/+2
UFS phy has two modes for each High speed generation. These modes are identified by two rates of operations - Rate A, and Rate B. Add these UFS phy modes to phy framework. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: Return NULL if the phy is optionalMaxime Ripard1-1/+1
If we're trying to get a handle to an optional phy, then the phy framework being disabled shouldn't return an hard error. Instead, return NULL just like phy_optional_get does when there's no phy provided in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-31phy: add sgmii and 10gkr modes to the phy_mode enumAntoine Tenart1-0/+2
This patch adds more generic PHY modes to the phy_mode enum, to allow configuring generic PHYs to the SGMII and/or the 10GKR mode by using the set_mode callback. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-01phy: Move ULPI phy header out of drivers to include pathVivek Gautam1-0/+31
Although ULPI phy is currently being used by tusb1210, there can be other consumers too in future. So move this to the includes path for phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-18/+0
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
2016-11-09scsi: ufs-qcom: phy/hcd: Refactoring phy clock handlingVivek Gautam1-18/+0
Add phy clock enable code to phy_power_on/off callbacks, and remove explicit calls to enable these phy clocks from the ufs-qcom hcd driver. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-05phy: Add reset callback for not generic phyRandy Li1-0/+7
Add a dummy function for phy_reset in case the CONFIG_GENERIC_PHY is disabled. Signed-off-by: Randy Li <ayaka@soulik.info> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-09-10phy: Add reset callbackRandy Li1-0/+3
The only use for this is for solving a hardware design problem in usb of Rockchip RK3288. Signed-off-by: Randy Li <ayaka@soulik.info> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-04phy: Add set_mode callbackDavid Lechner1-0/+17
The initial use for this is for PHYs that have a mode related to USB OTG. There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting in the USB PHY to override OTG VBUS and ID signals. Of course, the enum can be expaned in the future to include modes for other types of PHYs as well. Suggested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: David Lechner <david@lechnology.com>
2016-04-29phy: Add Tegra XUSB pad controller supportThierry Reding1-0/+30
Add a new driver for the XUSB pad controller found on NVIDIA Tegra SoCs. This hardware block used to be exposed as a pin controller, but it turns out that this isn't a good fit. The new driver and DT binding much more accurately describe the hardware and are more flexible in supporting new SoC generations. Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>