summaryrefslogtreecommitdiff
path: root/include/uapi
AgeCommit message (Collapse)AuthorFilesLines
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds2-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-02Merge tag 'arm64-upstream' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for 32-bit tasks on asymmetric AArch32 systems (on top of the scheduler changes merged via the tip tree). - More entry.S clean-ups and conversion to C. - MTE updates: allow a preferred tag checking mode to be set per CPU (the overhead of synchronous mode is smaller for some CPUs than others); optimisations for kernel entry/exit path; optionally disable MTE on the kernel command line. - Kselftest improvements for SVE and signal handling, PtrAuth. - Fix unlikely race where a TLBI could use stale ASID on an ASID roll-over (found by inspection). - Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher exception levels; drop unnecessary sigdelsetmask() call in the signal32 handling; remove BUG_ON when failing to allocate SVE state (just signal the process); SYM_CODE annotations. - Other trivial clean-ups: use macros instead of magic numbers, remove redundant returns, typos. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits) arm64: Do not trap PMSNEVFR_EL1 arm64: mm: fix comment typo of pud_offset_phys() arm64: signal32: Drop pointless call to sigdelsetmask() arm64/sve: Better handle failure to allocate SVE register storage arm64: Document the requirement for SCR_EL3.HCE arm64: head: avoid over-mapping in map_memory arm64/sve: Add a comment documenting the binutils needed for SVE asm arm64/sve: Add some comments for sve_save/load_state() kselftest/arm64: signal: Add a TODO list for signal handling tests kselftest/arm64: signal: Add test case for SVE register state in signals kselftest/arm64: signal: Verify that signals can't change the SVE vector length kselftest/arm64: signal: Check SVE signal frame shows expected vector length kselftest/arm64: signal: Support signal frames with SVE register data kselftest/arm64: signal: Add SVE to the set of features we can check for arm64: replace in_irq() with in_hardirq() kselftest/arm64: pac: Fix skipping of tests on systems without PAC Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs ...
2021-09-02Merge branch 'exit-cleanups-for-v5.15' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "In preparation of doing something about PTRACE_EVENT_EXIT I have started cleaning up various pieces of code related to do_exit. Most of that code I did not manage to get tested and reviewed before the merge window opened but a handful of very useful cleanups are ready to be merged. The first change is simply the removal of the bdflush system call. The code has now been disabled long enough that even the oldest userspace working userspace setups anyone can find to test are fine with the bdflush system call being removed. Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of calling do_exit directly is interesting only in that it is nearly the most difficult of the incorrect uses of do_exit to remove. The change to the seccomp code to simply send a signal instead of calling do_coredump directly is a very nice little cleanup made possible by realizing the existing signal sending helpers were missing a little bit of functionality that is easy to provide" * 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/seccomp: Dump core when there is only one live thread signal/seccomp: Refactor seccomp signal and coredump generation signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die exit/bdflush: Remove the deprecated bdflush system call
2021-09-02Merge branch 'siginfo-si_trapno-for-v5.15' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo si_trapno updates from Eric Biederman: "The full set of si_trapno changes was not appropriate as a fix for the newly added SIGTRAP TRAP_PERF, and so I postponed the rest of the related cleanups. This is the rest of the cleanups for si_trapno that reduces it from being a really weird arch special case that is expect to be always present (but isn't) on the architectures that support it to being yet another field in the _sigfault union of struct siginfo. The changes have been reviewed and marinated in linux-next. With the removal of this awkward special case new code (like SIGTRAP TRAP_PERF) that works across architectures should be easier to write and maintain" * 'siginfo-si_trapno-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal: Rename SIL_PERF_EVENT SIL_FAULT_PERF_EVENT for consistency signal: Verify the alignment and size of siginfo_t signal: Remove the generic __ARCH_SI_TRAPNO support signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNK signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRP arm64: Add compile-time asserts for siginfo_t offsets arm: Add compile-time asserts for siginfo_t offsets sparc64: Add compile-time asserts for siginfo_t offsets
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds10-122/+1273
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'misc-habanalabs-next-2021-09-01' of ↵Greg Kroah-Hartman1-20/+166
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next Oded writes: This tag contains habanalabs driver changes for v5.15: - Add a new uAPI (under the cs ioctl) to enable to user to reserve signals and signal them from within its workloads, while the driver performs the waiting. This allows finer granularity of pipelining between the different engines and resource utilization. - Add a new uAPI (under the wait_for_cs ioctl) to allow waiting on multiple command submissions (workloads) at the same time. This is an optimization for the user process so it won't need to call multiple times to the wait_for_cs ioctl. - Add new feature of "state dump", which can be triggered through new debugfs node. This is a similar concept to the kernel panic dump. This new mechanism retrieves information from the device in case one of the workloads that was sent by the user got stuck. This is very helpful for debugging the hang. - Add a new debugfs node to perform lookup of user pointers that are mapped to habana device's pmmu. - Fix to the tracking of user process when running inside a container. - Allow user to map more than 4GB of memory to the device MMU in single IOCTL call. - Minimize number of register reads done in GAUDI during user operation. - Allow user to retrieve the device's server type that the device is connected to. - Several fixes to the code of waiting on interrupts on behalf of the user. - Fixes and improvements to the hint mechanism in our VA allocation. - Update the firmware header files to the latest version while maintaining backward compatibility with older firmware versions. - Multiple fixes to various bugs. * tag 'misc-habanalabs-next-2021-09-01' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (61 commits) habanalabs/gaudi: hwmon default card name habanalabs: add support for f/w reset habanalabs/gaudi: block ICACHE_BASE_ADDERESS_HIGH in TPC habanalabs: cannot sleep while holding spinlock habanalabs: never copy_from_user inside spinlock habanalabs: remove unnecessary device status check habanalabs: disable IRQ in user interrupts spinlock habanalabs: add "in device creation" status habanalabs/gaudi: invalidate PMMU mem cache on init habanalabs/gaudi: size should be printed in decimal habanalabs/gaudi: define DC POWER for secured PMC habanalabs/gaudi: unmask out of bounds SLM access interrupt habanalabs: add userptr_lookup node in debugfs habanalabs/gaudi: fetch TPC/MME ECC errors from F/W habanalabs: modify multi-CS to wait on stream masters habanalabs/gaudi: add monitored SOBs to state dump habanalabs/gaudi: restore user registers when context opens habanalabs/gaudi: increase boot fit timeout habanalabs: update to latest firmware headers habanalabs/gaudi: minimize number of register reads ...
2021-09-01Merge tag 'media/v5.15-1' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new sensor drivers: imx335, imx412, ov9282 - new IR transmitter driver: meson-ir-tx - handro driver gained support for H.264 for Rockchip VDPU2 - imx gained support for i.MX8MQ - ti-vpe has gained support for other SoC variants - lots of cleanups, fixes, board additions and doc improvements * tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (195 commits) media: venus: venc: add support for V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM control media: venus: venc: Add support for intra-refresh period media: v4l2-ctrls: Add intra-refresh period control media: docs: ext-ctrls-codec: Document cyclic intra-refresh zero control value media: venus: helper: do not set constrained parameters for UBWC media: venus: venc: Fix potential null pointer dereference on pointer fmt media: venus: hfi: fix return value check in sys_get_prop_image_version() media: tegra-cec: Handle errors of clk_prepare_enable() media: cec-pin: rename timer overrun variables media: TDA1997x: report -ENOLINK after disconnecting HDMI source media: TDA1997x: fix tda1997x_query_dv_timings() return value media: Fix cosmetic error in TDA1997x driver media: v4l2-dv-timings.c: fix wrong condition in two for-loops media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller media: dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: imx7_mipi_csis: convert some switch cases to the default media: imx: imx7-media-csi: Fix buffer return upon stream start failure media: imx: imx7-media-csi: Don't set PIXEL_BIT in CSICR1 media: imx: imx7-media-csi: Set TWO_8BIT_SENSOR for >= 10-bit formats media: dt-bindings: media: nxp,imx7-csi: Add i.MX8MM support ...
2021-09-01Merge tag 'sound-5.15-rc1' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are a few intensive changes in ALSA core side at this time that helped with significant code reduction. Meanwhile we keep getting new stuff, so the total size still grows... Anyway, the below are some highlights in this development cycle. ALSA core: - New helpers to manage page allocations and card object with devres - Refactoring for memory allocation with wc-pages - A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for controlling the explicit sync of the stream control; it'll be used for ASoC SOF and non-coherent memory in future ASoC: - Lots of cleanups and improvements to the Intel drivers, including some new systems support - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L, Rockchip RK3568 S/PDIF USB-audio: - Re-organized the quirk handling and a new option quirk_flags - Fix for a regression in 5.14 code change for JACK - Quirks for Sony WALKMAN, Digidesign mbox HD-audio: - Enhanced support for CS8409 codec - More consistent shutdown behavior with the runtime PM - The model option can accept the PCI or codec SSID as an alias - Quirks for ASUS ROG, HP Spectre x360 Others: - Lots of code reduction in legacy drivers with devres helpers - FireWire MOTU 896HD support" * tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits) ASoC: Revert PCM trigger changes ALSA: usb-audio: Add lowlatency module option ALSA: hda/cs8409: Initialize Codec only in init fixup. ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary ALSA: usb-audio: Work around for XRUN with low latency playback ALSA: pcm: fix divide error in snd_pcm_lib_ioctl ASoC: soc-pcm: test refcount before triggering ASoC: soc-pcm: protect BE dailink state changes in trigger ASoC: wcd9335: Disable irq on slave ports in the remove function ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function ASoC: wcd9335: Fix a double irq free in the remove function ALSA: hda: Disable runtime resume at shutdown ASoC: rockchip: i2s: Add support for frame inversion ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs ASoC: rockchip: i2s: Add compatible for more SoCs ASoC: rockchip: i2s: Make playback/capture optional ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B ASoC: dt-bindings: rockchip: Document reset property for i2s ASoC: rockchip: i2s: Fix regmap_ops hang ASoC: rockchip: i2s: Improve dma data transfer efficiency ...
2021-09-01Merge tag 'tty-5.15-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
2021-09-01habanalabs: add "in device creation" statusOmer Shpigelman1-1/+3
On init, the disabled state is cleared right before hw_init and that causes the device to report on "Operational" state before the device initialization is finished. Although the char device is not yet exposed to the user at this stage, the sysfs entries are exposed. This can cause errors in monitoring applications that use the sysfs entries. In order to avoid this, a new state "in device creation" is introduced to ne reported when the device is not disabled but is still in init flow. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-09-01habanalabs: expose server type in INFO IOCTLOded Gabbay1-4/+44
Add the server type property to the hl_info_hw_ip_info structure that is exposed to the user via the INFO IOCTL. This is needed by the userspace s/w stack to know the connections map of the internal links that connect the ASIC among themselves inside the server. The F/W will tell us, as part of the NIC information, the server type that the GAUDI is located in. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-09-01Merge tag 'net-next-5.15' of ↵Linus Torvalds27-102/+618
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-09-01Merge tag 'for-5.15/dm-changes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add DM infrastructure for IMA-based remote attestion. These changes are the basis for deploying DM-based storage in a "cloud" that must validate configurations end-users run to maintain trust. These DM changes allow supported DM targets' configurations to be measured via IMA. But the policy and enforcement (of which configurations are valid) is managed by something outside the kernel (e.g. Keylime). - Fix DM crypt scalability regression on systems with many cpus due to percpu_counter spinlock contention in crypt_page_alloc(). - Use in_hardirq() instead of deprecated in_irq() in DM crypt. - Add event counters to DM writecache to allow users to further assess how the writecache is performing. - Various code cleanup in DM writecache's main IO mapping function. * tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: use in_hardirq() instead of deprecated in_irq() dm ima: update dm documentation for ima measurement support dm ima: update dm target attributes for ima measurements dm ima: add a warning in dm_init if duplicate ima events are not measured dm ima: prefix ima event name related to device mapper with dm_ dm ima: add version info to dm related events in ima log dm ima: prefix dm table hashes in ima log with hash algorithm dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc() dm: add documentation for IMA measurement support dm: update target status functions to support IMA measurement dm ima: measure data on device rename dm ima: measure data on table clear dm ima: measure data on device remove dm ima: measure data on device resume dm ima: measure data on table load dm writecache: add event counters dm writecache: report invalid return from writecache_map helpers dm writecache: further writecache_map() cleanup dm writecache: factor out writecache_map_remap_origin() dm writecache: split up writecache_map() to improve code readability
2021-09-01Merge branch 'i2c/for-mergewindow' of ↵Linus Torvalds2-0/+42
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has a smaller pull reuest this time: - new driver for I2C virtio - removal of PMC SMP driver because platform is already gone - IRQ probing and DMAENGINE API cleanups - add SI metric prefix definitions to units.h - beginning of i801 refactorization - a few driver improvements" * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits) i2c: cadence: Implement save restore i2c: xlp9xx: fix main IRQ check i2c: mt65xx: fix IRQ check i2c: virtio: add a virtio i2c frontend driver i2c: hix5hd2: fix IRQ check i2c: s3c2410: fix IRQ check i2c: iop3xx: fix deferred probing i2c: synquacer: fix deferred probing i2c: sun6i-pw2i: Prefer strscpy over strlcpy i2c: remove dead PMC MSP TWI/SMBus/I2C driver i2c: dev: Use sysfs_emit() in "show" functions i2c: dev: Define pr_fmt() and drop duplication substrings i2c: designware: Fix indentation in the header i2c: designware: Use DIV_ROUND_CLOSEST() macro units: Add SI metric prefix definitions i2c: at91: mark PM ops as __maybe unused i2c: sh_mobile: : use proper DMAENGINE API for termination i2c: qup: : use proper DMAENGINE API for termination i2c: mxs: : use proper DMAENGINE API for termination i2c: imx: : use proper DMAENGINE API for termination ...
2021-08-31Merge tag 'fs.move_mount.move_mount_set_group.v5.15' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull move_mount updates from Christian Brauner: "This contains an extension to the move_mount() syscall making it possible to add a single private mount into an existing propagation tree. The use-case comes from the criu folks which have been struggling with restoring complex mount trees for a long time. Variations of this work have been discussed at Plumbers before, e.g. https://www.linuxplumbersconf.org/event/7/contributions/640/ The extension to move_mount() enables criu to restore any set of mount namespaces, mount trees and sharing group trees without introducing yet more complexity into mount propagation itself. The changes required to criu to make use of this and restore complex propagation trees are available at https://github.com/Snorch/criu/commits/mount-v2-poc A cleaned-up version of this will go up for merging into the main criu repo after this lands" * tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest move_mount: allow to add a mount into an existing group
2021-08-31Merge tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds1-1/+0
Pull nfsd updates from Chuck Lever: "New features: - Support for server-side disconnect injection via debugfs - Protocol definitions for new RPC_AUTH_TLS authentication flavor Performance improvements: - Reduce page allocator traffic in the NFSD splice read actor - Reduce CPU utilization in svcrdma's Send completion handler Notable bug fixes: - Stabilize lockd operation when re-exporting NFS mounts - Fix the use of %.*s in NFSD tracepoints - Fix /proc/sys/fs/nfs/nsm_use_hostnames" * tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits) nfsd: fix crash on LOCKT on reexported NFSv3 nfs: don't allow reexport reclaims lockd: don't attempt blocking locks on nfs reexports nfs: don't atempt blocking locks on nfs reexports Keep read and write fds with each nlm_file lockd: update nlm_lookup_file reexport comment nlm: minor refactoring nlm: minor nlm_lookup_file argument change lockd: lockd server-side shouldn't set fl_ops SUNRPC: Add documentation for the fail_sunrpc/ directory SUNRPC: Server-side disconnect injection SUNRPC: Move client-side disconnect injection SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free() nfsd4: Fix forced-expiry locking rpc: fix gss_svc_init cleanup on failure SUNRPC: Add RPC_AUTH_TLS protocol numbers lockd: change the proc_handler for nsm_use_hostnames sysctl: introduce new proc handler proc_dobool SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency() ...
2021-08-31Merge tag 'for-5.15-tag' of ↵Linus Torvalds2-0/+36
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs updates from David Sterba: "The highlights of this round are integrations with fs-verity and idmapped mounts, the rest is usual mix of minor improvements, speedups and cleanups. There are some patches outside of btrfs, namely updating some VFS interfaces, all straightforward and acked. Features: - fs-verity support, using standard ioctls, backward compatible with read-only limitation on inodes with previously enabled fs-verity - idmapped mount support - make mount with rescue=ibadroots more tolerant to partially damaged trees - allow raid0 on a single device and raid10 on two devices, degenerate cases but might be useful as an intermediate step during conversion to other profiles - zoned mode block group auto reclaim can be disabled via sysfs knob Performance improvements: - continue readahead of node siblings even if target node is in memory, could speed up full send (on sample test +11%) - batching of delayed items can speed up creating many files - fsync/tree-log speedups - avoid unnecessary work (gains +2% throughput, -2% run time on sample load) - reduced lock contention on renames (on dbench +4% throughput, up to -30% latency) Fixes: - various zoned mode fixes - preemptive flushing threshold tuning, avoid excessive work on almost full filesystems Core: - continued subpage support, preparation for implementing remaining features like compression and defragmentation; with some limitations, write is now enabled on 64K page systems with 4K sectors, still considered experimental - no readahead on compressed reads - inline extents disabled - disabled raid56 profile conversion and mount - improved flushing logic, fixing early ENOSPC on some workloads - inode flags have been internally split to read-only and read-write incompat bit parts, used by fs-verity - new tree items for fs-verity - descriptor item - Merkle tree item - inode operations extended to be namespace-aware - cleanups and refactoring Generic code changes: - fs: new export filemap_fdatawrite_wbc - fs: removed sync_inode - block: bio_trim argument type fixups - vfs: add namespace-aware lookup" * tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits) btrfs: reset replace target device to allocation state on close btrfs: zoned: fix ordered extent boundary calculation btrfs: do not do preemptive flushing if the majority is global rsv btrfs: reduce the preemptive flushing threshold to 90% btrfs: tree-log: check btrfs_lookup_data_extent return value btrfs: avoid unnecessarily logging directories that had no changes btrfs: allow idmapped mount btrfs: handle ACLs on idmapped mounts btrfs: allow idmapped INO_LOOKUP_USER ioctl btrfs: allow idmapped SUBVOL_SETFLAGS ioctl btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids btrfs: allow idmapped SNAP_DESTROY ioctls btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls btrfs: check whether fsgid/fsuid are mapped during subvolume creation btrfs: allow idmapped permission inode op btrfs: allow idmapped setattr inode op btrfs: allow idmapped tmpfile inode op btrfs: allow idmapped symlink inode op btrfs: allow idmapped mkdir inode op ...
2021-08-31gpio: virtio: Fix sparse warningsViresh Kumar1-5/+5
Fix warnings reported by sparse, related to type mismatch between u16 and __le16. Reported-by: kernel test robot <lkp@intel.com> Fixes: 3a29355a22c0 ("gpio: Add virtio-gpio driver") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-08-31Merge remote-tracking branch 'tip/sched/arm64' into for-next/coreCatalin Marinas4-4/+16
* tip/sched/arm64: (785 commits) Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0 arm64: Implement task_cpu_possible_mask() sched: Introduce dl_task_check_affinity() to check proposed affinity sched: Allow task CPU affinity to be restricted on asymmetric systems sched: Split the guts of sched_setaffinity() into a helper function sched: Introduce task_struct::user_cpus_ptr to track requested affinity sched: Reject CPU affinity changes based on task_cpu_possible_mask() cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq() cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus() cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1 sched: Introduce task_cpu_possible_mask() to limit fallback rq selection sched: Cgroup SCHED_IDLE support sched/topology: Skip updating masks for non-online nodes Linux 5.14-rc6 lib: use PFN_PHYS() in devmem_is_allowed() ...
2021-08-31Merge tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+4
Pull io_uring mkdirat/symlinkat/linkat support from Jens Axboe: "This adds io_uring support for mkdirat, symlinkat, and linkat" * tag 'for-5.15/io_uring-vfs-2021-08-30' of git://git.kernel.dk/linux-block: io_uring: add support for IORING_OP_LINKAT io_uring: add support for IORING_OP_SYMLINKAT io_uring: add support for IORING_OP_MKDIRAT namei: update do_*() helpers to return ints namei: make do_linkat() take struct filename namei: add getname_uflags() namei: make do_symlinkat() take struct filename namei: make do_mknodat() take struct filename namei: make do_mkdirat() take struct filename namei: change filename_parentat() calling conventions namei: ignore ERR/NULL names in putname()
2021-08-31Merge tag 'for-5.15/io_uring-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+14
Pull io_uring updates from Jens Axboe: - cancellation cleanups (Hao, Pavel) - io-wq accounting cleanup (Hao) - io_uring submit locking fix (Hao) - io_uring link handling fixes (Hao) - fixed file improvements (wangyangbo, Pavel) - allow updates of linked timeouts like regular timeouts (Pavel) - IOPOLL fix (Pavel) - remove batched file get optimization (Pavel) - improve reference handling (Pavel) - IRQ task_work batching (Pavel) - allow pure fixed file, and add support for open/accept (Pavel) - GFP_ATOMIC RT kernel fix - multiple CQ ring waiter improvement - funnel IRQ completions through task_work - add support for limiting async workers explicitly - add different clocksource support for timeouts - io-wq wakeup race fix - lots of cleanups and improvement (Pavel et al) * tag 'for-5.15/io_uring-2021-08-30' of git://git.kernel.dk/linux-block: (87 commits) io-wq: fix wakeup race when adding new work io-wq: wqe and worker locks no longer need to be IRQ safe io-wq: check max_worker limits if a worker transitions bound state io_uring: allow updating linked timeouts io_uring: keep ltimeouts in a list io_uring: support CLOCK_BOOTTIME/REALTIME for timeouts io-wq: provide a way to limit max number of workers io_uring: add build check for buf_index overflows io_uring: clarify io_req_task_cancel() locking io_uring: add task-refs-get helper io_uring: fix failed linkchain code logic io_uring: remove redundant req_set_fail() io_uring: don't free request to slab io_uring: accept directly into fixed file table io_uring: hand code io_accept() fd installing io_uring: openat directly into fixed fd table net: add accept helper not installing fd io_uring: fix io_try_cancel_userdata race for iowq io_uring: IRQ rw completion batching io_uring: batch task work locking ...
2021-08-31Merge tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-224/+0
Pull block driver updates from Jens Axboe: "Sitting on top of the core block changes, here are the driver changes for the 5.15 merge window: - NVMe updates via Christoph: - suspend improvements for devices with an HMB (Keith Busch) - handle double completions more gacefull (Sagi Grimberg) - cleanup the selects for the nvme core code a bit (Sagi Grimberg) - don't update queue count when failing to set io queues (Ruozhu Li) - various nvmet connect fixes (Amit Engel) - cleanup lightnvm leftovers (Keith Busch, me) - small cleanups (Colin Ian King, Hou Pu) - add tracing for the Set Features command (Hou Pu) - CMB sysfs cleanups (Keith Busch) - add a mutex_destroy call (Keith Busch) - remove lightnvm subsystem. It's served its purpose and ultimately led to zoned nvme support, we no longer need it (Christoph) - revert floppy O_NDELAY fix (Denis) - nbd fixes (Hou, Pavel, Baokun) - nbd locking fixes (Tetsuo) - nbd device removal fixes (Christoph) - raid10 rcu warning fix (Xiao) - raid1 write behind fix (Guoqing) - rnbd fixes (Gioh, Md Haris) - misc fixes (Colin)" * tag 'for-5.15/drivers-2021-08-30' of git://git.kernel.dk/linux-block: (42 commits) Revert "floppy: reintroduce O_NDELAY fix" raid1: ensure write behind bio has less than BIO_MAX_VECS sectors md/raid10: Remove unnecessary rcu_dereference in raid10_handle_discard nbd: remove nbd->destroy_complete nbd: only return usable devices from nbd_find_unused nbd: set nbd->index before releasing nbd_index_mutex nbd: prevent IDR lookups from finding partially initialized devices nbd: reset NBD to NULL when restarting in nbd_genl_connect nbd: add missing locking to the nbd_dev_add error path nvme: remove the unused NVME_NS_* enum nvme: remove nvm_ndev from ns nvme: Have NVME_FABRICS select NVME_CORE instead of transport drivers block: nbd: add sanity check for first_minor nvmet: check that host sqsize does not exceed ctrl MQES nvmet: avoid duplicate qid in connect cmd nvmet: pass back cntlid on successful completion nvme-rdma: don't update queue count when failing to set io queues nvme-tcp: don't update queue count when failing to set io queues nvme-tcp: pair send_mutex init with destroy nvme: allow user toggling hmb usage ...
2021-08-31Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds2-0/+53
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ...
2021-08-31Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-1/+33
Daniel Borkmann says: ==================== bpf-next 2021-08-31 We've added 116 non-merge commits during the last 17 day(s) which contain a total of 126 files changed, 6813 insertions(+), 4027 deletions(-). The main changes are: 1) Add opaque bpf_cookie to perf link which the program can read out again, to be used in libbpf-based USDT library, from Andrii Nakryiko. 2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu. 3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang. 4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch to another congestion control algorithm during init, from Martin KaFai Lau. 5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima. 6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta. 7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT} progs, from Xu Liu and Stanislav Fomichev. 8) Support for __weak typed ksyms in libbpf, from Hao Luo. 9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky. 10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov. 11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann. 12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian, Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others. 13) Another big batch to revamp XDP samples in order to give them consistent look and feel, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits) MAINTAINERS: Remove self from powerpc BPF JIT selftests/bpf: Fix potential unreleased lock samples: bpf: Fix uninitialized variable in xdp_redirect_cpu selftests/bpf: Reduce more flakyness in sockmap_listen bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS bpf: selftests: Add dctcp fallback test bpf: selftests: Add connect_to_fd_opts to network_helpers bpf: selftests: Add sk_state to bpf_tcp_helpers.h bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt selftests: xsk: Preface options with opt selftests: xsk: Make enums lower case selftests: xsk: Generate packets from specification selftests: xsk: Generate packet directly in umem selftests: xsk: Simplify cleanup of ifobjects selftests: xsk: Decrease sending speed selftests: xsk: Validate tx stats on tx thread selftests: xsk: Simplify packet validation in xsk tests selftests: xsk: Rename worker_* functions that are not thread entry points selftests: xsk: Disassociate umem size with packets sent selftests: xsk: Remove end-of-test packet ... ==================== Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-31Merge tag 'x86-cpu-2021-08-30' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache flush updates from Thomas Gleixner: "A reworked version of the opt-in L1D flush mechanism. This is a stop gap for potential future speculation related hardware vulnerabilities and a mechanism for truly security paranoid applications. It allows a task to request that the L1D cache is flushed when the kernel switches to a different mm. This can be requested via prctl(). Changes vs the previous versions: - Get rid of the software flush fallback - Make the handling consistent with other mitigations - Kill the task when it ends up on a SMT enabled core which defeats the purpose of L1D flushing obviously" * tag 'x86-cpu-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: Add L1D flushing Documentation x86, prctl: Hook L1D flushing in via prctl x86/mm: Prepare for opt-in based L1D flush in switch_mm() x86/process: Make room for TIF_SPEC_L1D_FLUSH sched: Add task_work callback for paranoid L1D flush x86/mm: Refactor cond_ibpb() to support other use cases x86/smp: Add a per-cpu view of SMT state
2021-08-30Merge tag 'fsnotify_for_v5.15-rc1' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "fsnotify speedups when notification actually isn't used and support for identifying processes which caused fanotify events through pidfd instead of normal pid" * tag 'fsnotify_for_v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: optimize the case of no marks of any type fsnotify: count all objects with attached connectors fsnotify: count s_fsnotify_inode_refs for attached connectors fsnotify: replace igrab() with ihold() on attach connector fanotify: add pidfd support to the fanotify API fanotify: introduce a generic info record copying helper fanotify: minor cosmetic adjustments to fid labels kernel/pid.c: implement additional checks upon pidfd_create() parameters kernel/pid.c: remove static qualifier from pidfd_create()
2021-08-30Merge tag 'asoc-v5.15' of ↵Takashi Iwai9-10/+54
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.15 Quite a quiet release this time, mostly a combination of cleanups and a good set of new drivers. - Lots of cleanups and improvements to the Intel drivers, including some new systems support. - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.
2021-08-30Merge branch 'sg_nents' into rdma.git for-nextJason Gunthorpe8-9/+49
From Maor Gottlieb ==================== Fix the use of nents and orig_nents in the sg table append helpers. The nents should be used by the DMA layer to store the number of DMA mapped sges, the orig_nents is the number of CPU sges. Since the sg append logic doesn't always create a SGL with exactly orig_nents entries store a total_nents as well to allow the table to be properly free'd and reorganize the freeing logic to share across all the use cases. ==================== Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> * 'sg_nents': RDMA: Use the sg_table directly and remove the opencoded version from umem lib/scatterlist: Fix wrong update of orig_nents lib/scatterlist: Provide a dedicated function to support table append
2021-08-30Merge remote-tracking branch 'asoc/for-5.15' into asoc-linusMark Brown1-1/+5
2021-08-30netfilter: refuse insertion if chain has grown too largeFlorian Westphal1-0/+1
Also add a stat counter for this that gets exported both via old /proc interface and ctnetlink. Assuming the old default size of 16536 buckets and max hash occupancy of 64k, this results in 128k insertions (origin+reply), so ~8 entries per chain on average. The revised settings in this series will result in about two entries per bucket on average. This allows a hard-limit ceiling of 64. This is not tunable at the moment, but its possible to either increase nf_conntrack_buckets or decrease nf_conntrack_max to reduce average lengths. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-08-30io_uring: allow updating linked timeoutsPavel Begunkov1-5/+6
We allow updating normal timeouts, add support for adjusting timings of linked timeouts as well. Reported-by: Victor Stewart <v@nametag.social> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29io_uring: support CLOCK_BOOTTIME/REALTIME for timeoutsJens Axboe1-0/+3
Certain use cases want to use CLOCK_BOOTTIME or CLOCK_REALTIME rather than CLOCK_MONOTONIC, instead of the default CLOCK_MONOTONIC. Add an IORING_TIMEOUT_BOOTTIME and IORING_TIMEOUT_REALTIME flag that allows timeouts and linked timeouts to use the selected clock source. Only one clock source may be selected, and we -EINVAL the request if more than one is given. If neither BOOTIME nor REALTIME are selected, the previous default of MONOTONIC is used. Link: https://github.com/axboe/liburing/issues/369 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29io-wq: provide a way to limit max number of workersJens Axboe1-0/+3
io-wq divides work into two categories: 1) Work that completes in a bounded time, like reading from a regular file or a block device. This type of work is limited based on the size of the SQ ring. 2) Work that may never complete, we call this unbounded work. The amount of workers here is just limited by RLIMIT_NPROC. For various uses cases, it's handy to have the kernel limit the maximum amount of pending workers for both categories. Provide a way to do with with a new IORING_REGISTER_IOWQ_MAX_WORKERS operation. IORING_REGISTER_IOWQ_MAX_WORKERS takes an array of two integers and sets the max worker count to what is being passed in for each category. The old values are returned into that same array. If 0 is being passed in for either category, it simply returns the current value. The value is capped at RLIMIT_NPROC. This actually isn't that important as it's more of a hint, if we're exceeding the value then our attempt to fork a new worker will fail. This happens naturally already if more than one node is in the system, as these values are per-node internally for io-wq. Reported-by: Johannes Lundberg <johalun0@gmail.com> Link: https://github.com/axboe/liburing/issues/420 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-29dmaengine: idxd: fix setting up priv mode for dwqDave Jiang1-0/+1
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the PCI Express PASID capability is 0 and pasid is enabled. Make sure that the WQCFG priv field is set correctly according to usage type. Reject config if setting up kernel WQ type and no support. Also add the correct priv setup for a descriptor. Fixes: 484f910e93b4 ("dmaengine: idxd: fix wq config registers offset programming") Cc: Ramesh Thomas <ramesh.thomas@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-29habanalabs: add support for encapsulated signals reservationfarah kassabri1-13/+97
The signaling from within encapsulated OP capability is merged into the existing stream architecture, such that one can trigger multiple signaling from an encapsulated op, according to the time the event was done in the graph execution and avoid the need to wait for the whole encapsulated OP execution to be complete before the stream can signal. This commit implements only the reserve/unreserve part. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-08-29habanalabs: add wait-for-multi-CS uAPIOhad Sharabi1-2/+21
When user sends multiple CSs, waiting for each CS is not efficient as it involves many user-kernel context switches. In order to address this issue we add support to "wait on multiple CSs" using a new uAPI which can wait on maximum of 32 CSs. The new uAPI is defined using a new flag - WAIT_FOR_MULTI_CS - in the wait_for_cs IOCTL. The input parameters for this uAPI will be: @seq: user pointer to an array of up to 32 CS's sequence numbers. @seq_array_len: length of sequence array. @timeout_us: timeout for waiting for any CS. The output paramateres for this API will be: @status: multi CS ioctl completion status (dedicated status was added as well). @flags: bitmap of output flags of the CS. @cs_completion_map: bitmap for multi CS, if CS sequence that was placed in index N in input seq array has completed- the N-th bit in cs_completion_map will be 1, otherwise it will be 0. @timestamp_nsec: timestamp of the first completed CS Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-08-29habanalabs: allow fail on inability to respect hintYuri Nudelman1-0/+1
A new user flag is required to make memory map hint mandatory, in contrast to the current situation where it is best effort. This is due to the requirement to map certain data to specific pre-determined device virtual address ranges. Signed-off-by: Yuri Nudelman <ynudelman@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-08-28ipv6: add IFLA_INET6_RA_MTU to expose mtu valueRocco Yue1-0/+1
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu" file, which can temporarily record the mtu value of the last received RA message when the RA mtu value is lower than the interface mtu, but this proc has following limitations: (1) when the interface mtu (/sys/class/net/<iface>/mtu) is updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will be updated to the value of interface mtu; (2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect ipv6 connection, and not affect ipv4. Therefore, when the mtu option is carried in the RA message, there will be a problem that the user sometimes cannot obtain RA mtu value correctly by reading mtu6. After this patch set, if a RA message carries the mtu option, you can send a netlink msg which nlmsg_type is RTM_GETLINK, and then by parsing the attribute of IFLA_INET6_RA_MTU to get the mtu value carried in the RA message received on the inet6 device. In addition, you can also get a link notification when ra_mtu is updated so it doesn't have to poll. In this way, if the MTU values that the device receives from the network in the PCO IPv4 and the RA IPv6 procedures are different, the user can obtain the correct ipv6 ra_mtu value and compare the value of ra_mtu and ipv4 mtu, then the device can use the lower MTU value for both IPv4 and IPv6. Signed-off-by: Rocco Yue <rocco.yue@mediatek.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller1-0/+11
ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2021-08-27 1) Remove an unneeded extra variable in esp4 esp_ssg_unref. From Corey Minyard. 2) Add a configuration option to change the default behaviour to block traffic if there is no matching policy. Joint work with Christian Langrock and Antony Antony. 3) Fix a shift-out-of-bounce bug reported from syzbot. From Pavel Skripkin. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-0/+502
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26um: virt-pci: fix uapi documentationJohannes Berg1-2/+3
The identifier names in the documentation here didn't match the real ones, and the reserved was missing. Fix that. Reported-by: Bjorn Helgaas <helgaas@kernel.org> Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-08-26Merge tag 'drm/tegra/for-5.15-rc1' of ↵Dave Airlie1-23/+402
ssh://git.freedesktop.org/git/tegra/linux into drm-next drm/tegra: Changes for v5.15-rc1 The bulk of these changes is a more modern ABI that can be efficiently used on newer SoCs as well as older ones. The userspace parts for this are available here: - libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8 - VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver In addition, existing userspace from the grate reverse-engineering project has been updated to use this new ABI: - X11 driver: https://github.com/grate-driver/xf86-video-opentegra - 3D driver: https://github.com/grate-driver/grate Other than that, there's also support for display memory bandwidth management for various generations and a bit of cleanup. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210813163616.2822355-1-thierry.reding@gmail.com
2021-08-25bpf: Add bpf_task_pt_regs() helperDaniel Xu1-0/+7
The motivation behind this helper is to access userspace pt_regs in a kprobe handler. uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a kprobe handler. The final case (kernelspace pt_regs in uprobe) is pretty rare (usermode helper) so I think that can be solved later if necessary. More concretely, this helper is useful in doing BPF-based DWARF stack unwinding. Currently the kernel can only do framepointer based stack unwinds for userspace code. This is because the DWARF state machines are too fragile to be computed in kernelspace [0]. The idea behind DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace stack (while in prog context) and send it up to userspace for unwinding (probably with libunwind) [1]. This would effectively enable profiling applications with -fomit-frame-pointer using kprobes and uprobes. [0]: https://lkml.org/lkml/2012/2/10/356 [1]: https://github.com/danobi/bpf-dwarf-walk Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
2021-08-25io_uring: openat directly into fixed fd tablePavel Begunkov1-1/+4
Instead of opening a file into a process's file table as usual and then registering the fd within io_uring, some users may want to skip the first step and place it directly into io_uring's fixed file table. This patch adds such a capability for IORING_OP_OPENAT and IORING_OP_OPENAT2. The behaviour is controlled by setting sqe->file_index, where 0 implies the old behaviour using normal file tables. If non-zero value is specified, then it will behave as described and place the file into a fixed file slot sqe->file_index - 1. A file table should be already created, the slot should be valid and empty, otherwise the operation will fail. Keep the error codes consistent with IORING_OP_FILES_UPDATE, ENXIO and EINVAL on inappropriate fixed tables, and return EBADF on collision with already registered file. Note: IOSQE_FIXED_FILE can't be used to switch between modes, because accept takes a file, and it already uses the flag with a different meaning. Suggested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/e9b33d1163286f51ea707f87d95bd596dada1e65.1629888991.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-25scsi: fc: Add EDC ELS definitionJames Smart1-0/+106
Add Exchange Diagnostic Capabilities (EDC) ELS definition and the following capability descriptors: - Link Fault Capability Descriptor - Congestion Signaling Capability Descriptor Definitions taken from FC-LS-5 r5.01 Link: https://lore.kernel.org/r/20210816162901.121235-2-jsmart2021@gmail.com Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-24ethtool: add two coalesce attributes for CQE modeYufeng Mo1-0/+2
Currently, there are many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order to make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI. Also add an new structure kernel_ethtool_coalesce, then the new parameter can be added into this struct. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24bpf: Migrate cgroup_bpf to internal cgroup_bpf_attach_type enumDave Marchevsky1-1/+1
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf attach types and a function to map bpf_attach_type values to the new enum. Inspired by netns_bpf_attach_type. Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever possible. Functionality is unchanged as attach_type_to_prog_type switches in bpf/syscall.c were preventing non-cgroup programs from making use of the invalid cgroup_bpf array slots. As a result struct cgroup_bpf uses 504 fewer bytes relative to when its arrays were sized using MAX_BPF_ATTACH_TYPE. bpf_cgroup_storage is notably not migrated as struct bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type member which is not meant to be opaque. Similarly, bpf_cgroup_link continues to report its bpf_attach_type member to userspace via fdinfo and bpf_link_info. To ease disambiguation, bpf_attach_type variables are renamed from 'type' to 'atype' when changed to cgroup_bpf_attach_type. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
2021-08-23io_uring: add support for IORING_OP_LINKATDmitry Kadashev1-0/+2
IORING_OP_LINKAT behaves like linkat(2) and takes the same flags and arguments. In some internal places 'hardlink' is used instead of 'link' to avoid confusion with the SQE links. Name 'link' conflicts with the existing 'link' member of io_kiocb. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-12-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add support for IORING_OP_SYMLINKATDmitry Kadashev1-0/+1
IORING_OP_SYMLINKAT behaves like symlinkat(2) and takes the same flags and arguments. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/io-uring/20210514145259.wtl4xcsp52woi6ab@wittgenstein/ Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-11-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-23io_uring: add support for IORING_OP_MKDIRATDmitry Kadashev1-0/+1
IORING_OP_MKDIRAT behaves like mkdirat(2) and takes the same flags and arguments. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20210708063447.3556403-10-dkadashev@gmail.com [axboe: add splice_fd_in check] Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-03 10:20:08 +0300