summaryrefslogtreecommitdiff
path: root/init
AgeCommit message (Collapse)AuthorFilesLines
2020-11-27Merge tag 'printk-for-5.10-rc6-fixup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - do not lose trailing newline in pr_cont() calls - two trivial fixes for a dead store and a config description * tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: finalize records with trailing newlines printk: remove unneeded dead-store assignment init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
2020-11-13bootconfig: Extend the magic check range to the preceding 3 bytesMasami Hiramatsu1-2/+12
Since Grub may align the size of initrd to 4 if user pass initrd from cpio, we have to check the preceding 3 bytes as well. Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly") Reported-by: Chen Yu <yu.chen.surf@gmail.com> Tested-by: Chen Yu <yu.chen.surf@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-03init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT descriptionPaul Menzel1-1/+1
Currently, LOG_BUF_SHIFT defaults to 17, which is 2 ^ 17 bytes = 128 KB, and LOG_CPU_MAX_BUF_SHIFT defaults to 12, which is 2 ^ 12 bytes = 4 KB. Half of 128 KB is 64 KB, so more than 16 CPUs are required for the value to be used, as then the sum of contributions is greater than 64 KB for the first time. My guess is, that the description was written with the configuration values used in the SUSE in mind. Fixes: 23b2899f7f194f06e ("printk: allow increasing the ring buffer depending on the number of CPUs") Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200811092924.6256-1-pmenzel@molgen.mpg.de
2020-10-19Merge tag 'linux-kselftest-kunit-5.10-rc1' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more Kunit updates from Shuah Khan: - add Kunit to kernel_init() and remove KUnit from init calls entirely. This addresses the concern that Kunit would not work correctly during late init phase. - add a linker section where KUnit can put references to its test suites. This is the first step in transitioning to dispatching all KUnit tests from a centralized executor rather than having each as its own separate late_initcall. - add a centralized executor to dispatch tests rather than relying on late_initcall to schedule each test suite separately. Centralized execution is for built-in tests only; modules will execute tests when loaded. - convert bitfield test to use KUnit framework - Documentation updates for naming guidelines and how kunit_test_suite() works. - add test plan to KUnit TAP format * tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE lib: kunit: add bitfield test conversion to KUnit Documentation: kunit: add a brief blurb about kunit_test_suite kunit: test: add test plan to KUnit TAP format init: main: add KUnit to kernel init kunit: test: create a single centralized executor for all tests vmlinux.lds.h: add linker section for KUnit test suites Documentation: kunit: Add naming guidelines
2020-10-16Merge tag 'net-next-5.10' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-16Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
2020-10-14Merge tag 'printk-for-5.10' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: "The big new thing is the fully lockless ringbuffer implementation, including the support for continuous lines. It will allow to store and read messages in any situation wihtout the risk of deadlocks and without the need of temporary per-CPU buffers. The access is still serialized by logbuf_lock. It synchronizes few more operations, for example, temporary buffer for formatting the message, syslog and kmsg_dump operations. The lock removal is being discussed and should be ready for the next release. The continuous lines are handled exactly the same way as before to avoid regressions in user space. It means that they are appended to the last message when the caller is the same. Only the last message can be extended. The data ring includes plain text of the messages. Except for an integer at the beginning of each message that points back to the descriptor ring with other metadata. The dictionary has to stay. journalctl uses it to filter the log. It allows to show messages related to a given device. The dictionary values are stored in the descriptor ring with the other metadata. This is the first part of the printk rework as discussed at Plumbers 2019, see https://lore.kernel.org/r/87k1acz5rx.fsf@linutronix.de. The next big step will be handling consoles by kthreads during the normal system operation. It will require special handling of situations when the kthreads could not get scheduled, for example, early boot, suspend, panic. Other changes: - Add John Ogness as a reviewer for printk subsystem. He is author of the rework and is familiar with the code and history. - Fix locking in serial8250_do_startup() to prevent lockdep report. - Few code cleanups" * tag 'printk-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (27 commits) printk: Use fallthrough pseudo-keyword printk: reduce setup_text_buf size to LOG_LINE_MAX printk: avoid and/or handle record truncation printk: remove dict ring printk: move dictionary keys to dev_printk_info printk: move printk_info into separate array printk: reimplement log_cont using record extension printk: ringbuffer: add finalization/extension support printk: ringbuffer: change representation of states printk: ringbuffer: clear initial reserved fields printk: ringbuffer: add BLK_DATALESS() macro printk: ringbuffer: relocate get_data() printk: ringbuffer: avoid memcpy() on state_var printk: ringbuffer: fix setting state in desc_read() kernel.h: Move oops_in_progress to printk.h scripts/gdb: update for lockless printk ringbuffer scripts/gdb: add utils.read_ulong() docs: vmcoreinfo: add lockless printk ringbuffer vmcoreinfo printk: reduce LOG_BUF_SHIFT range for H8300 printk: ringbuffer: support dataless records ...
2020-10-13Merge tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+3
Pull io_uring updates from Jens Axboe: - Add blkcg accounting for io-wq offload (Dennis) - A use-after-free fix for io-wq (Hillf) - Cancelation fixes and improvements - Use proper files_struct references for offload - Cleanup of io_uring_get_socket() since that can now go into our own header - SQPOLL fixes and cleanups, and support for sharing the thread - Improvement to how page accounting is done for registered buffers and huge pages, accounting the real pinned state - Series cleaning up the xarray code (Willy) - Various cleanups, refactoring, and improvements (Pavel) - Use raw spinlock for io-wq (Sebastian) - Add support for ring restrictions (Stefano) * tag 'io_uring-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (62 commits) io_uring: keep a pointer ref_node in file_data io_uring: refactor *files_register()'s error paths io_uring: clean file_data access in files_register io_uring: don't delay io_init_req() error check io_uring: clean leftovers after splitting issue io_uring: remove timeout.list after hrtimer cancel io_uring: use a separate struct for timeout_remove io_uring: improve submit_state.ios_left accounting io_uring: simplify io_file_get() io_uring: kill extra check in fixed io_file_get() io_uring: clean up ->files grabbing io_uring: don't io_prep_async_work() linked reqs io_uring: Convert advanced XArray uses to the normal API io_uring: Fix XArray usage in io_uring_add_task_file io_uring: Fix use of XArray in __io_uring_files_cancel io_uring: fix break condition for __io_uring_register() waiting io_uring: no need to call xa_destroy() on empty xarray io_uring: batch account ->req_issue and task struct references io_uring: kill callback_head argument for io_req_task_work_add() io_uring: move req preps out of io_issue_sqe() ...
2020-10-13Merge tag 'docs-5.10' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "As hoped, things calmed down for docs this cycle; fewer changes and almost no conflicts at all. This includes: - A reworked and expanded user-mode Linux document - Some simplifications and improvements for submitting-patches.rst - An emergency fix for (some) problems with Sphinx 3.x - Some welcome automarkup improvements to automatically generate cross-references to struct definitions and other documents - The usual collection of translation updates, typo fixes, etc" * tag 'docs-5.10' of git://git.lwn.net/linux: (81 commits) gpiolib: Update indentation in driver.rst for code excerpts Documentation/admin-guide: tainted-kernels: Fix typo occured Documentation: better locations for sysfs-pci, sysfs-tagging docs: programming-languages: refresh blurb on clang support Documentation: kvm: fix a typo Documentation: Chinese translation of Documentation/arm64/amu.rst doc: zh_CN: index files in arm64 subdirectory mailmap: add entry for <mstarovoitov@marvell.com> doc: seq_file: clarify role of *pos in ->next() docs: trace: ring-buffer-design.rst: use the new SPDX tag Documentation: kernel-parameters: clarify "module." parameters Fix references to nommu-mmap.rst docs: rewrite admin-guide/sysctl/abi.rst docs: fb: Remove vesafb scrollback boot option docs: fb: Remove sstfb scrollback boot option docs: fb: Remove matroxfb scrollback boot option docs: fb: Remove framebuffer scrollback boot option docs: replace the old User Mode Linux HowTo with a new one Documentation/admin-guide: blockdev/ramdisk: remove use of "rdev" Documentation/admin-guide: README & svga: remove use of "rdev" ...
2020-10-12Merge branch 'printk-rework' into for-linusPetr Mladek1-1/+2
2020-10-09init: main: add KUnit to kernel initBrendan Higgins1-0/+4
Although we have not seen any actual examples where KUnit doesn't work because it runs in the late init phase of the kernel, it has been a concern for some time that this could potentially be an issue in the future. So, remove KUnit from init calls entirely, instead call directly from kernel_init() so that KUnit runs after late init. Co-developed-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-10-01io_uring: don't rely on weak ->files referencesJens Axboe1-0/+3
Grab actual references to the files_struct. To avoid circular references issues due to this, we add a per-task note that keeps track of what io_uring contexts a task has used. When the tasks execs or exits its assigned files, we cancel requests based on this tracking. With that, we can grab proper references to the files table, and no longer need to rely on stashing away ring_fd and ring_file to check if the ring_fd may have been closed. Cc: stable@vger.kernel.org # v5.5+ Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24Fix references to nommu-mmap.rstStephen Kitt1-1/+1
nommu-mmap.rst was moved to Documentation/admin-guide/mm; this patch updates the remaining stale references to Documentation/mm. Fixes: 800c02f5d030 ("docs: move nommu-mmap.txt to admin-guide and rename to ReST") Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200812092230.27541-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+3
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19bootconfig: init: make xbc_namebuf staticJason Yan1-1/+1
This eliminates the following sparse warning: init/main.c:306:6: warning: symbol 'xbc_namebuf' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20200915070324.2239473-1-yanaijie@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-18kprobes: tracing/kprobes: Fix to kill kprobes on initmem after bootMasami Hiramatsu1-0/+2
Since kprobe_event= cmdline option allows user to put kprobes on the functions in initmem, kprobe has to make such probes gone after boot. Currently the probes on the init functions in modules will be handled by module callback, but the kernel init text isn't handled. Without this, kprobes may access non-exist text area to disable or remove it. Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2 Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-08printk: reduce LOG_BUF_SHIFT range for H8300John Ogness1-1/+2
The .bss section for the h8300 is relatively small. A value of CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static printk ringbuffer that is too large. Limit the range appropriately for the H8300. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04init: fix error check in clean_path()Barret Rhoden1-1/+1
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced vfs_lstat(), the '!' was dropped. Fixes: 716308a5331b ("init: add an init_stat helper") Signed-off-by: Barret Rhoden <brho@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-01bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIGShaokun Zhang1-1/+1
Fix up one typo: CONFIG_BOOTCONFIG -> CONFIG_BOOT_CONFIG Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-08-28bpf: Introduce sleepable BPF programsAlexei Starovoitov1-0/+1
Introduce sleepable BPF programs that can request such property for themselves via BPF_F_SLEEPABLE flag at program load time. In such case they will be able to use helpers like bpf_copy_from_user() that might sleep. At present only fentry/fexit/fmod_ret and lsm programs can request to be sleepable and only when they are attached to kernel functions that are known to allow sleeping. The non-sleepable programs are relying on implicit rcu_read_lock() and migrate_disable() to protect life time of programs, maps that they use and per-cpu kernel structures used to pass info between bpf programs and the kernel. The sleepable programs cannot be enclosed into rcu_read_lock(). migrate_disable() maps to preempt_disable() in non-RT kernels, so the progs should not be enclosed in migrate_disable() as well. Therefore rcu_read_lock_trace is used to protect the life time of sleepable progs. There are many networking and tracing program types. In many cases the 'struct bpf_prog *' pointer itself is rcu protected within some other kernel data structure and the kernel code is using rcu_dereference() to load that program pointer and call BPF_PROG_RUN() on it. All these cases are not touched. Instead sleepable bpf programs are allowed with bpf trampoline only. The program pointers are hard-coded into generated assembly of bpf trampoline and synchronize_rcu_tasks_trace() is used to protect the life time of the program. The same trampoline can hold both sleepable and non-sleepable progs. When rcu_read_lock_trace is held it means that some sleepable bpf program is running from bpf trampoline. Those programs can use bpf arrays and preallocated hash/lru maps. These map types are waiting on programs to complete via synchronize_rcu_tasks_trace(); Updates to trampoline now has to do synchronize_rcu_tasks_trace() and synchronize_rcu_tasks() to wait for sleepable progs to finish and for trampoline assembly to finish. This is the first step of introducing sleepable progs. Eventually dynamically allocated hash maps can be allowed and networking program types can become sleepable too. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: KP Singh <kpsingh@google.com> Link: https://lore.kernel.org/bpf/20200827220114.69225-3-alexei.starovoitov@gmail.com
2020-08-20bpf: Add kernel module with user mode driver that populates bpffs.Alexei Starovoitov1-0/+2
Add kernel module with user mode driver that populates bpffs with BPF iterators. $ mount bpffs /my/bpffs/ -t bpf $ ls -la /my/bpffs/ total 4 drwxrwxrwt 2 root root 0 Jul 2 00:27 . drwxr-xr-x 19 root root 4096 Jul 2 00:09 .. -rw------- 1 root root 0 Jul 2 00:27 maps.debug -rw------- 1 root root 0 Jul 2 00:27 progs.debug The user mode driver will load BPF Type Formats, create BPF maps, populate BPF maps, load two BPF programs, attach them to BPF iterators, and finally send two bpf_link IDs back to the kernel. The kernel will pin two bpf_links into newly mounted bpffs instance under names "progs.debug" and "maps.debug". These two files become human readable. $ cat /my/bpffs/progs.debug id name attached 11 dump_bpf_map bpf_iter_bpf_map 12 dump_bpf_prog bpf_iter_bpf_prog 27 test_pkt_access 32 test_main test_pkt_access test_pkt_access 33 test_subprog1 test_pkt_access_subprog1 test_pkt_access 34 test_subprog2 test_pkt_access_subprog2 test_pkt_access 35 test_subprog3 test_pkt_access_subprog3 test_pkt_access 36 new_get_skb_len get_skb_len test_pkt_access 37 new_get_skb_ifindex get_skb_ifindex test_pkt_access 38 new_get_constant get_constant test_pkt_access The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about all BPF programs currently loaded in the system. This information is unstable and will change from kernel to kernel as ".debug" suffix conveys. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
2020-08-15Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+1
Pull OpenRISC updates from Stafford Horne: "A few patches all over the place during this cycle, mostly bug and sparse warning fixes for OpenRISC, but a few enhancements too. Note, there are 2 non OpenRISC specific fixups. Non OpenRISC fixes: - In init we need to align the init_task correctly to fix an issue with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I kept it on my tree. - In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd. Arnd asked to merge it via my tree. OpenRISC fixes: - Many fixes for OpenRISC sprase warnings. - Add support OpenRISC SMP tlb flushing rather than always flushing the entire TLB on every CPU. - Fix bug when dumping stack via /proc/xxx/stack of user threads" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: uaccess: Add user address space check to access_ok openrisc: signal: Fix sparse address space warnings openrisc: uaccess: Remove unused macro __addr_ok openrisc: uaccess: Use static inline function in access_ok openrisc: uaccess: Fix sparse address space warnings openrisc: io: Fixup defines and move include to the end asm-generic/io.h: Fix sparse warnings on big-endian architectures openrisc: Implement proper SMP tlb flushing openrisc: Fix oops caused when dumping stack openrisc: Add support for external initrd images init: Align init_task to avoid conflict with MUTEX_FLAGS openrisc: fix __user in raw_copy_to_user()'s prototype
2020-08-11Merge tag 'locking-urgent-2020-08-10' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
2020-08-08Merge tag 'trace-v5.9' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - The biggest news in that the tracing ring buffer can now time events that interrupted other ring buffer events. Before this change, if an interrupt came in while recording another event, and that interrupt also had an event, those events would all have the same time stamp as the event it interrupted. Now, with the new design, those events will have a unique time stamp and rightfully display the time for those events that were recorded while interrupting another event. - Bootconfig how has an "override" operator that lets the users have a default config, but then add options to override the default. - A fix was made to properly filter function graph tracing to the ftrace PIDs. This came in at the end of the -rc cycle, and needs to be backported. - Several clean ups, performance updates, and minor fixes as well. * tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits) tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE tracing: Use trace_sched_process_free() instead of exit() for pid tracing bootconfig: Fix to find the initargs correctly Documentation: bootconfig: Add bootconfig override operator tools/bootconfig: Add testcases for value override operator lib/bootconfig: Add override operator support kprobes: Remove show_registers() function prototype tracing/uprobe: Remove dead code in trace_uprobe_register() kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler ftrace: Fix ftrace_trace_task return value tracepoint: Use __used attribute definitions from compiler_attributes.h tracepoint: Mark __tracepoint_string's __used trace : Have tracing buffer info use kvzalloc instead of kzalloc tracing: Remove outdated comment in stack handling ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines ftrace: Setup correct FTRACE_FL_REGS flags for module tracing/hwlat: Honor the tracing_cpumask tracing/hwlat: Drop the duplicate assignment in start_kthread() tracing: Save one trace_event->type by using __TRACE_LAST_TYPE ...
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-5/+6
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07kasan, arm64: don't instrument functions that enable kasanAndrey Konovalov1-1/+1
This patch prepares Software Tag-Based KASAN for stack tagging support. With stack tagging enabled, KASAN tags stack variable in each function in its prologue. In start_kernel() stack variables get tagged before KASAN is enabled via setup_arch()->kasan_init(). As the result the tags for start_kernel()'s stack variables end up in the temporary shadow memory. Later when KASAN gets enabled, switched to normal shadow, and starts checking tags, this leads to false-positive reports, as proper tags are missing in normal shadow. Disable KASAN instrumentation for start_kernel(). Also disable it for arm64's setup_arch() as a precaution (it doesn't have any stack variables right now). [andreyknvl@google.com: reorder attributes for start_kernel()] Link: http://lkml.kernel.org/r/26fb6165a17abcf61222eda5184c030fb6b133d1.1596544734.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Walter Wu <walter-zh.wu@mediatek.com> Cc: Ard Biesheuvel <ardb@kernel.org> Link: http://lkml.kernel.org/r/55d432671a92e931ab8234b03dc36b14d4c21bfb.1596199677.git.andreyknvl@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07mm/slab: expand CONFIG_SLAB_FREELIST_HARDENED to include SLABKees Cook1-4/+5
Patch series "mm: Expand CONFIG_SLAB_FREELIST_HARDENED to include SLAB" In reviewing Vlastimil Babka's latest slub debug series, I realized[1] that several checks under CONFIG_SLAB_FREELIST_HARDENED weren't being applied to SLAB. Fix this by expanding the Kconfig coverage, and adding a simple double-free test for SLAB. This patch (of 2): Include SLAB caches when performing kmem_cache pointer verification. A defense against such corruption[1] should be applied to all the allocators. With this added, the "SLAB_FREE_CROSS" and "SLAB_FREE_PAGE" LKDTM tests now pass on SLAB: lkdtm: Performing direct entry SLAB_FREE_CROSS lkdtm: Attempting cross-cache slab free ... ------------[ cut here ]------------ cache_from_obj: Wrong slab cache. lkdtm-heap-b but object is from lkdtm-heap-a WARNING: CPU: 2 PID: 2195 at mm/slab.h:530 kmem_cache_free+0x8d/0x1d0 ... lkdtm: Performing direct entry SLAB_FREE_PAGE lkdtm: Attempting non-Slab slab free ... ------------[ cut here ]------------ virt_to_cache: Object is not a Slab page! WARNING: CPU: 1 PID: 2202 at mm/slab.h:489 kmem_cache_free+0x196/0x1d0 Additionally clean up neighboring Kconfig entries for clarity, readability, and redundant option removal. [1] https://github.com/ThomasKing2014/slides/raw/master/Building%20universal%20Android%20rooting%20with%20a%20type%20confusion%20vulnerability.pdf Fixes: 598a0717a816 ("mm/slab: validate cache membership under freelist hardening") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Popov <alex.popov@linux.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Garrett <mjg59@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Link: http://lkml.kernel.org/r/20200625215548.389774-1-keescook@chromium.org Link: http://lkml.kernel.org/r/20200625215548.389774-2-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07Merge branch 'hch.init_path' of ↵Linus Torvalds9-591/+148
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull init and set_fs() cleanups from Al Viro: "Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series" * 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits) init: add an init_dup helper init: add an init_utimes helper init: add an init_stat helper init: add an init_mknod helper init: add an init_mkdir helper init: add an init_symlink helper init: add an init_link helper init: add an init_eaccess helper init: add an init_chmod helper init: add an init_chown helper init: add an init_chroot helper init: add an init_chdir helper init: add an init_rmdir helper init: add an init_unlink helper init: add an init_umount helper init: add an init_mount helper init: mark create_dev as __init init: mark console_on_rootfs as __init init: initialize ramdisk_execute_command at compile time devtmpfs: refactor devtmpfsd() ...
2020-08-05Merge tag 'docs-5.9' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "It's been a busy cycle for documentation - hopefully the busiest for a while to come. Changes include: - Some new Chinese translations - Progress on the battle against double words words and non-HTTPS URLs - Some block-mq documentation - More RST conversions from Mauro. At this point, that task is essentially complete, so we shouldn't see this kind of churn again for a while. Unless we decide to switch to asciidoc or something...:) - Lots of typo fixes, warning fixes, and more" * tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits) scripts/kernel-doc: optionally treat warnings as errors docs: ia64: correct typo mailmap: add entry for <alobakin@marvell.com> doc/zh_CN: add cpu-load Chinese version Documentation/admin-guide: tainted-kernels: fix spelling mistake MAINTAINERS: adjust kprobes.rst entry to new location devices.txt: document rfkill allocation PCI: correct flag name docs: filesystems: vfs: correct flag name docs: filesystems: vfs: correct sync_mode flag names docs: path-lookup: markup fixes for emphasis docs: path-lookup: more markup fixes docs: path-lookup: fix HTML entity mojibake CREDITS: Replace HTTP links with HTTPS ones docs: process: Add an example for creating a fixes tag doc/zh_CN: add Chinese translation prefer section doc/zh_CN: add clearing-warn-once Chinese version doc/zh_CN: add admin-guide index doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label futex: MAINTAINERS: Re-add selftests directory ...
2020-08-05init: add an init_dup helperChristoph Hellwig1-4/+4
Add a simple helper to grab a reference to a file and install it at the next available fd, and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-05Merge branch 'exec-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull execve updates from Eric Biederman: "During the development of v5.7 I ran into bugs and quality of implementation issues related to exec that could not be easily fixed because of the way exec is implemented. So I have been diggin into exec and cleaning up what I can. This cycle I have been looking at different ideas and different implementations to see what is possible to improve exec, and cleaning the way exec interfaces with in kernel users. Only cleaning up the interfaces of exec with rest of the kernel has managed to stabalize and make it through review in time for v5.9-rc1 resulting in 2 sets of changes this cycle. - Implement kernel_execve - Make the user mode driver code a better citizen With kernel_execve the code size got a little larger as the copying of parameters from userspace and copying of parameters from userspace is now separate. The good news is kernel threads no longer need to play games with set_fs to use exec. Which when combined with the rest of Christophs set_fs changes should security bugs with set_fs much more difficult" * 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) exec: Implement kernel_execve exec: Factor bprm_stack_limits out of prepare_arg_pages exec: Factor bprm_execve out of do_execve_common exec: Move bprm_mm_init into alloc_bprm exec: Move initialization of bprm->filename into alloc_bprm exec: Factor out alloc_bprm exec: Remove unnecessary spaces from binfmts.h umd: Stop using split_argv umd: Remove exit_umh bpfilter: Take advantage of the facilities of struct pid exit: Factor thread_group_exited out of pidfd_poll umd: Track user space drivers with struct pid bpfilter: Move bpfilter_umh back into init data exec: Remove do_execve_file umh: Stop calling do_execve_file umd: Transform fork_usermode_blob into fork_usermode_driver umd: Rename umd_info.cmdline umd_info.driver_name umd: For clarity rename umh_info umd_info umh: Separate the user mode driver and the user mode helper support umh: Remove call_usermodehelper_setup_file. ...
2020-08-05Merge tag 'seccomp-v5.9-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "There are a bunch of clean ups and selftest improvements along with two major updates to the SECCOMP_RET_USER_NOTIF filter return: EPOLLHUP support to more easily detect the death of a monitored process, and being able to inject fds when intercepting syscalls that expect an fd-opening side-effect (needed by both container folks and Chrome). The latter continued the refactoring of __scm_install_fd() started by Christoph, and in the process found and fixed a handful of bugs in various callers. - Improved selftest coverage, timeouts, and reporting - Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner) - Refactor __scm_install_fd() into __receive_fd() and fix buggy callers - Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun Dhillon)" * tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits) selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD seccomp: Introduce addfd ioctl to seccomp user notifier fs: Expand __receive_fd() to accept existing fd pidfd: Replace open-coded receive_fd() fs: Add receive_fd() wrapper for __receive_fd() fs: Move __scm_install_fd() to __receive_fd() net/scm: Regularize compat handling of scm_detach_fds() pidfd: Add missing sock updates for pidfd_getfd() net/compat: Add missing sock updates for SCM_RIGHTS selftests/seccomp: Check ENOSYS under tracing selftests/seccomp: Refactor to use fixture variants selftests/harness: Clean up kern-doc for fixtures seccomp: Use -1 marker for end of mode 1 syscall list seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall() selftests/seccomp: Make kcmp() less required seccomp: Use pr_fmt selftests/seccomp: Improve calibration loop selftests/seccomp: use 90s as timeout selftests/seccomp: Expand benchmark to per-filter measurements ...
2020-08-04bootconfig: Fix to find the initargs correctlyMasami Hiramatsu1-6/+8
Since the parse_args() stops parsing at '--', bootconfig_params() will never get the '--' as param and initargs_found never be true. In the result, if we pass some init arguments via the bootconfig, those are always appended to the kernel command line with '--' even if the kernel command line already has '--'. To fix this correctly, check the return value of parse_args() and set initargs_found true if the return value is not an error but a valid address. Link: https://lkml.kernel.org/r/159650953285.270383.14822353843556363851.stgit@devnote2 Fixes: f61872bb58a1 ("bootconfig: Use parse_args() to find bootconfig and '--'") Cc: stable@vger.kernel.org Reported-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-04Merge tag 'var-init-v5.9-rc1' of ↵Linus Torvalds1-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull automatic variable initialization updates from Kees Cook: "This adds the "zero" init option from Clang, which is being used widely in production builds of Android and Chrome OS (though it also keeps the "pattern" init, which is better for debug builds). - Introduce CONFIG_INIT_STACK_ALL_ZERO (Alexander Potapenko)" * tag 'var-init-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: security: allow using Clang's zero initialization for stack variables
2020-08-04init: Align init_task to avoid conflict with MUTEX_FLAGSStafford Horne1-0/+1
When booting on 32-bit machines (seen on OpenRISC) I saw this warning with CONFIG_DEBUG_MUTEXES turned on. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/mutex.c:1242 __mutex_unlock_slowpath+0x328/0x3ec DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current) Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc1-simple-smp-00005-g2864e2171db4-dirty #179 Call trace: [<(ptrval)>] dump_stack+0x34/0x48 [<(ptrval)>] __warn+0x104/0x158 [<(ptrval)>] ? __mutex_unlock_slowpath+0x328/0x3ec [<(ptrval)>] warn_slowpath_fmt+0x7c/0x94 [<(ptrval)>] __mutex_unlock_slowpath+0x328/0x3ec [<(ptrval)>] mutex_unlock+0x18/0x28 [<(ptrval)>] __cpuhp_setup_state_cpuslocked.part.0+0x29c/0x2f4 [<(ptrval)>] ? page_alloc_cpu_dead+0x0/0x30 [<(ptrval)>] ? start_kernel+0x0/0x684 [<(ptrval)>] __cpuhp_setup_state+0x4c/0x5c [<(ptrval)>] page_alloc_init+0x34/0x68 [<(ptrval)>] ? start_kernel+0x1a0/0x684 [<(ptrval)>] ? early_init_dt_scan_nodes+0x60/0x70 irq event stamp: 0 I traced this to kernel/locking/mutex.c storing 3 bits of MUTEX_FLAGS in the task_struct pointer (mutex.owner). There is a comment saying that task_structs are always aligned to L1_CACHE_BYTES. This is not true for the init_task. On 64-bit machines this is not a problem because symbol addresses are naturally aligned to 64-bits providing 3 bits for MUTEX_FLAGS. Howerver, for 32-bit machines the symbol address only has 2 bits available. Fix this by setting init_task alignment to at least L1_CACHE_BYTES. Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2020-08-04Merge tag 'x86-cleanups-2020-08-03' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "Misc cleanups all around the place" * tag 'x86-cleanups-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Initialize pointer bitmap with NULL rather than 0 x86: uv: uv_hub.h: Delete duplicated word x86: cmpxchg_32.h: Delete duplicated word x86: bootparam.h: Delete duplicated word x86/mm: Remove the unused mk_kernel_pgd() #define x86/tsc: Remove unused "US_SCALE" and "NS_SCALE" leftover macros x86/ioapic: Remove unused "IOAPIC_AUTO" define x86/mm: Drop unused MAX_PHYSADDR_BITS x86/msr: Move the F15h MSRs where they belong x86/idt: Make idt_descr static initrd: Remove erroneous comment x86/mm/32: Fix -Wmissing prototypes warnings for init.c cpu/speculation: Add prototype for cpu_show_srbds() x86/mm: Fix -Wmissing-prototypes warnings for arch/x86/mm/init.c x86/asm: Unify __ASSEMBLY__ blocks x86/cpufeatures: Mark two free bits in word 3 x86/msr: Lift AMD family 0x15 power-specific MSRs
2020-08-04Merge tag 'x86-boot-2020-08-03' of ↵Linus Torvalds1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The main change in this cycle was to add support for ZSTD-compressed kernel and initrd images. ZSTD has a very fast decompressor, yet it compresses better than gzip" * tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: dontdiff: Add zstd compressed files .gitignore: Add ZSTD-compressed files x86: Add support for ZSTD compressed kernel x86: Bump ZO_z_extra_bytes margin for zstd usr: Add support for zstd compressed initramfs init: Add support for zstd compressed kernel lib: Add zstd support to decompress lib: Prepare zstd for preboot environment, improve performance
2020-07-31init: Add support for zstd compressed kernelNick Terrell1-1/+14
- Add the zstd and zstd22 cmds to scripts/Makefile.lib - Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options Architecture specific support is still needed for decompression. Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com
2020-07-31init: add an init_utimes helperChristoph Hellwig1-2/+1
Add a simple helper to set timestamps with a kernel space file name and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_stat helperChristoph Hellwig1-1/+2
Add a simple helper to stat with a kernel space file name and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_mknod helperChristoph Hellwig3-4/+3
Add a simple helper to mknod with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_mknod. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_mkdir helperChristoph Hellwig3-4/+5
Add a simple helper to mkdir with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_mkdir. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_symlink helperChristoph Hellwig1-1/+1
Add a simple helper to symlink with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_symlink. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_link helperChristoph Hellwig1-1/+1
Add a simple helper to link with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_link. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_eaccess helperChristoph Hellwig1-2/+2
Add a simple helper to check if a file exists based on kernel space file name and switch the early init code over to it. Note that this theoretically changes behavior as it always is based on the effective permissions. But during early init that doesn't make a difference. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_chmod helperChristoph Hellwig1-2/+2
Add a simple helper to chmod with a kernel space file name and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_chown helperChristoph Hellwig1-3/+3
Add a simple helper to chown with a kernel space file name and switch the early init code over to it. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_chroot helperChristoph Hellwig2-3/+3
Add a simple helper to chroot with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_chroot. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31init: add an init_chdir helperChristoph Hellwig2-5/+5
Add a simple helper to chdir with a kernel space file name and switch the early init code over to it. Remove the now unused ksys_chdir. Signed-off-by: Christoph Hellwig <hch@lst.de>