summaryrefslogtreecommitdiff
path: root/lib/test_rhashtable.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-08rhashtable-test: Fix max_size parameter descriptionPhil Sutter1-1/+1
Looks like a simple copy'n'paste error. Fixes: 1aa661f5c3df1 ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05rhashtable: accept GFP flags in rhashtable_walk_initBob Copeland1-1/+1
In certain cases, the 802.11 mesh pathtable code wants to iterate over all of the entries in the forwarding table from the receive path, which is inside an RCU read-side critical section. Enable walks inside atomic sections by allowing GFP_ATOMIC allocations for the walker state. Change all existing callsites to pass in GFP_KERNEL. Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Bob Copeland <me@bobcopeland.com> [also adjust gfs2/glock.c and rhashtable tests] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-11-23rhashtable-test: allow to retry even if -ENOMEM was returnedPhil Sutter1-1/+13
This is rather a hack to expose the current issue with rhashtable to under high pressure sometimes return -ENOMEM even though system memory is not exhausted and a consecutive insert may succeed. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23rhashtable-test: calculate max_entries value by defaultPhil Sutter1-3/+5
A maximum table size of 64k entries is insufficient for the multiple threads test even in default configuration (10 threads * 50000 objects = 500000 objects in total). Since we know how many objects will be inserted, calculate the max size unless overridden by parameter. Note that specifying the exact number of objects upon table init won't suffice as that value is being rounded down to the next power of two - anticipate this by rounding up to the next power of two in beforehand. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23rhashtable-test: retry insert operationsPhil Sutter1-24/+29
After adding cond_resched() calls to threadfunc(), a surprisingly high rate of insert failures occurred probably due to table resizes getting a better chance to run in background. To not soften up the remaining tests, retry inserts until they either succeed or fail permanently. Also change the non-threaded test to retry insert operations, too. Suggested-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23rhashtable-test: add cond_resched() to thread testPhil Sutter1-0/+5
This should fix for soft lockup bugs triggered on slow systems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18rhashtable-test: extend to test concurrencyPhil Sutter1-1/+155
After having tested insertion, lookup, table walk and removal, spawn a number of threads running operations on the same rhashtable. Each of them will: 1) insert it's own set of objects, 2) lookup every successfully inserted object and finally 3) remove objects in several rounds until all of them have been removed, making sure the remaining ones are still found after each round. This should put a good amount of load onto the system and due to synchronising thread startup via two semaphores also extensive concurrent table access. The default number of ten threads returned within half a second on my local VM with two cores. Running 200 threads took about four seconds. If slow systems suffer too much from this though, the default could be lowered or even set to zero so this extended test does not run at all by default. Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21rhashtable: Allow other tasks to be scheduled in large lookup loopsThomas Graf1-0/+7
Depending on system speed, the large lookup/insert/delete loops of the testsuite can take a considerable amount of time to complete causing watchdog warnings to appear. Allow other tasks to be scheduled throughout the loops. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-06rhashtable-test: Fix 64bit divisionThomas Graf1-1/+2
A 64bit division went in unnoticed. Use do_div() to accomodate non 64bit architectures. Reported-by: kbuild test robot Fixes: 1aa661f5c3df ("rhashtable-test: Measure time to insert, remove & traverse entries") Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Detect insertion failuresThomas Graf1-6/+20
Account for failed inserts due to memory pressure or EBUSY and ignore failed entries during the consistency check. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Use walker to test bucket statisticsThomas Graf1-30/+30
As resizes may continue to run in the background, use walker to ensure we see all entries. Also print the encountered number of rehashes queued up while traversing. This may lead to warnings due to entries being seen multiple times. We consider them non-fatal. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Do not allocate individual test objectsThomas Graf1-22/+6
By far the most expensive part of the selftest was the allocation of entries. Using a static array allows to measure the rhashtable operations. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Get rid of ptr in test_obj structureThomas Graf1-6/+3
This only blows up the size of the test structure for no gain in test coverage. Reduces size of test_obj from 24 to 16 bytes. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Measure time to insert, remove & traverse entriesThomas Graf1-31/+69
Make test configurable by allowing to specify all relevant knobs through module parameters. Do several test runs and measure the average time it takes to insert & remove all entries. Note, a deferred resize might still continue to run in the background. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04rhashtable-test: Remove unused TEST_NEXPANDSThomas Graf1-1/+0
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03test_rhashtable: Remove bogus max_size settingHerbert Xu1-1/+0
Now that resizing is completely automatic, we need to remove the max_size setting or the test will fail. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24rhashtable: Add multiple rehash supportHerbert Xu1-24/+0
This patch adds the missing bits to allow multiple rehashes. The read-side as well as remove already handle this correctly. So it's only the rehasher and insertion that need modification to handle this. Note that this patch doesn't actually enable it so for now rehashing is still only performed by the worker thread. This patch also disables the explicit expand/shrink interface because the table is meant to expand and shrink automatically, and continuing to export these interfaces unnecessarily complicates the life of the rehasher since the rehash process is now composed of two parts. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20test_rhashtable: Use inlined rhashtable interfaceHerbert Xu1-14/+19
This patch converts test_rhashtable to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18test_rhashtable: Use rhashtable max_size instead of max_shiftHerbert Xu1-1/+1
This patch converts test_rhashtable to use rhashtable max_size instead of the obsolete max_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-15rhashtable: Add rehash counter to bucket_tableHerbert Xu1-1/+1
This patch adds a rehash counter to bucket_table to indicate the last bucket that has been rehashed. This serves two purposes: 1. Any bucket that has been rehashed can never gain a new object. 2. If the rehash counter reaches the size of the table, the table will forever remain empty. This patch also downsizes bucket_table->size to an unsigned int since we do not support sizes greater than 32 bits yet. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28rhashtable: remove indirection for grow/shrink decision functionsDaniel Borkmann1-0/+1
Currently, all real users of rhashtable default their grow and shrink decision functions to rht_grow_above_75() and rht_shrink_below_30(), so that there's currently no need to have this explicitly selectable. It can/should be generic and private inside rhashtable until a real use case pops up. Since we can make this private, we'll save us this additional indirection layer and can improve insertion/deletion time as well. Reference: http://patchwork.ozlabs.org/patch/443040/ Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28rhashtable: unconditionally grow when max_shift is not specifiedDaniel Borkmann1-2/+0
While commit c0c09bfdc415 ("rhashtable: avoid unnecessary wakeup for worker queue") rightfully moved part of the decision making of whether we should expand or shrink from the expand/shrink functions themselves into insert/delete functions in order to avoid unnecessary worker wake-ups, it however introduced a regression by doing so. Before that change, if no max_shift was specified (= 0) on rhashtable initialization, rhashtable_expand() would just grow unconditionally and lets the available memory be the limiting factor. After that change, if no max_shift was specified, there would be _no_ expansion step at all. Given that netlink and tipc have a max_shift specified, it was not visible there, but Josh Hunt reported that if nft that starts out with a default element hint of 3 if not otherwise provided, would slow i.e. inserts down trememdously as it cannot grow larger to relax table occupancy. Given that the test case verifies shrinks/expands manually, we also must remove pointer to the helper functions to explicitly avoid parallel resizing on insertions/deletions. test_bucket_stats() and test_rht_lookup() could also be wrapped around rhashtable mutex to explicitly synchronize a walk from resizing, but I think that defeats the actual test case which intended to have explicit test steps, i.e. 1) inserts, 2) expands, 3) shrinks, 4) deletions, with object verification after each stage. Reported-by: Josh Hunt <johunt@akamai.com> Fixes: c0c09bfdc415 ("rhashtable: avoid unnecessary wakeup for worker queue") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Ying Xue <ying.xue@windriver.com> Cc: Josh Hunt <johunt@akamai.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21rhashtable: allow to unload test moduleDaniel Borkmann1-0/+5
There's no good reason why to disallow unloading of the rhashtable test case module. Commit 9d6dbe1bbaf8 moved the code from a boot test into a stand-alone module, but only converted the subsys_initcall() handler into a module_init() function without a related exit handler, and thus preventing the test module from unloading. Fixes: 9d6dbe1bbaf8 ("rhashtable: Make selftest modular") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-21rhashtable: don't allocate ht structure on stack in test_rht_initDaniel Borkmann1-1/+2
With object runtime debugging enabled, the rhashtable test suite will rightfully throw a warning "ODEBUG: object is on stack, but not annotated" from rhashtable_init(). This is because run_work is (correctly) being initialized via INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning, rhashtable_init() is okay as is, we just need to move ht e.g., into global scope. It never triggered anything, since test_rhashtable is rather a controlled environment and effectively runs to completion, so that stack memory is not vanishing underneath us, we shouldn't confuse any testers with it though. Fixes: 7e1e77636e36 ("lib: Resizable, Scalable, Concurrent Hash Table") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31rhashtable: Make selftest modularGeert Uytterhoeven1-0/+227
Allow the selftest on the resizable hash table to be built modular, just like all other tests that do not depend on DEBUG_KERNEL. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>