summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2022-04-13stacktrace: move filter_irq_stacks() to kernel/stacktrace.cMarco Elver1-24/+0
commit f39f21b3ddc7fc0f87eb6dc75ddc81b5bbfb7672 upstream. filter_irq_stacks() has little to do with the stackdepot implementation, except that it is usually used by users (such as KASAN) of stackdepot to reduce the stack trace. However, filter_irq_stacks() itself is not useful without a stack trace as obtained by stack_trace_save() and friends. Therefore, move filter_irq_stacks() to kernel/stacktrace.c, so that new users of filter_irq_stacks() do not have to start depending on STACKDEPOT only for filter_irq_stacks(). Link: https://lkml.kernel.org/r/20210923104803.2620285-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Jann Horn <jannh@google.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13ubsan: remove CONFIG_UBSAN_OBJECT_SIZEKees Cook2-35/+0
commit 69d0db01e210e07fe915e5da91b54a867cda040f upstream. The object-size sanitizer is redundant to -Warray-bounds, and inappropriately performs its checks at run-time when all information needed for the evaluation is available at compile-time, making it quite difficult to use: https://bugzilla.kernel.org/show_bug.cgi?id=214861 With -Warray-bounds almost enabled globally, it doesn't make sense to keep this around. Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Marco Elver <elver@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13lz4: fix LZ4_decompress_safe_partial read out of boundGuo Xuenan1-2/+6
commit eafc0a02391b7b36617b36c97c4b5d6832cf5e24 upstream. When partialDecoding, it is EOF if we've either filled the output buffer or can't proceed with reading an offset for following match. In some extreme corner cases when compressed data is suitably corrupted, UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial may lead to read out of bound problem during decoding. lz4 upstream has fixed it [2] and this issue has been disscussed here [3] before. current decompression routine was ported from lz4 v1.8.3, bumping lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd better fix it first. [1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/ [2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad# [3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/ Link: https://lkml.kernel.org/r/20211111105048.2006070-1-guoxuenan@huawei.com Reported-by: syzbot+63d688f1d899c588fb71@syzkaller.appspotmail.com Signed-off-by: Guo Xuenan <guoxuenan@huawei.com> Reviewed-by: Nick Terrell <terrelln@fb.com> Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Yann Collet <cyan@fb.com> Cc: Chengyang Fan <cy.fan@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13lib/Kconfig.debug: add ARCH dependency for FUNCTION_ALIGN optionFeng Tang1-1/+2
[ Upstream commit 1bf18da62106225dbc47aab41efee2aeb99caccd ] 0Day robots reported there is compiling issue for 'csky' ARCH when CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]: All errors (new ones prefixed by >>): {standard input}: Assembler messages: >> {standard input}:2277: Error: pcrel offset for branch to .LS000B too far (0x3c) Which was discussed in [2]. And as there is no solution for csky yet, add some dependency for this config to limit it to several ARCHs which have no compiling issue so far. [1]. https://lore.kernel.org/lkml/202202271612.W32UJAj2-lkp@intel.com/ [2]. https://www.spinics.net/lists/linux-kbuild/msg30298.html Link: https://lkml.kernel.org/r/20220304021100.GN4548@shbuild999.sh.intel.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Guo Ren <guoren@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13lib/logic_iomem: correct fallback config referencesJohannes Berg1-4/+4
[ Upstream commit 2a6852cb8ff0c8c1363cac648d68489343813212 ] Due to some renaming, we ended up with the "indirect iomem" naming in Kconfig, following INDIRECT_PIO. However, clearly I missed following through on that in the ifdefs, but so far INDIRECT_IOMEM_FALLBACK isn't used by any architecture. Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08XArray: Update the LRU list in xas_split()Matthew Wilcox (Oracle)1-0/+2
commit 3ed4bb77156da0bc732847c8c9df92454c1fbeea upstream. When splitting a value entry, we may need to add the new nodes to the LRU list and remove the parent node from the LRU list. The WARN_ON checks in shadow_lru_isolate() catch this oversight. This bug was latent until we stopped splitting folios in shrink_page_list() with commit 820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them"). That allows the creation of large shadow entries, and subsequently when trying to page in a small page, we will split the large shadow entry in __filemap_add_folio(). Fixes: 8fc75643c5e1 ("XArray: add xas_split") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08XArray: Fix xas_create_range() when multi-order entry presentMatthew Wilcox (Oracle)2-0/+24
commit 3e3c658055c002900982513e289398a1aad4a488 upstream. If there is already an entry present that is of order >= XA_CHUNK_SHIFT when we call xas_create_range(), xas_create_range() will misinterpret that entry as a node and dereference xa_node->parent, generally leading to a crash that looks something like this: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0 RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline] RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725 It's deterministically reproducable once you know what the problem is, but producing it in a live kernel requires khugepaged to hit a race. While the problem has been present since xas_create_range() was introduced, I'm not aware of a way to hit it before the page cache was converted to use multi-index entries. Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Reported-by: syzbot+0d2b0bf32ca5cfd09f2e@syzkaller.appspotmail.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08lib/test_lockup: fix kernel pointer check for separate address spacesArnd Bergmann1-3/+8
[ Upstream commit 5a06fcb15b43d1f7bf740c672950122331cb5655 ] test_kernel_ptr() uses access_ok() to figure out if a given address points to user space instead of kernel space. However on architectures that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid for both, and the check always fails because access_ok() returns true. Make the check for user space pointers conditional on the type of address space layout. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08uaccess: fix type mismatch warnings from access_ok()Arnd Bergmann1-2/+2
[ Upstream commit 23fc539e81295b14b50c6ccc5baeb4f3d59d822d ] On some architectures, access_ok() does not do any argument type checking, so replacing the definition with a generic one causes a few warnings for harmless issues that were never caught before. Fix the ones that I found either through my own test builds or that were reported by the 0-day bot. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08lib/raid6/test/Makefile: Use $(pound) instead of \# for Make 4.3Paul Menzel1-1/+3
[ Upstream commit 633174a7046ec3b4572bec24ef98e6ee89bce14b ] Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the errors below: $ cd lib/raid6/test/ $ make <stdin>:1:1: error: stray ‘\’ in program <stdin>:1:2: error: stray ‘#’ in program <stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \ before ‘<’ token [...] The errors come from the HAS_ALTIVEC test, which fails, and the POWER optimized versions are not built. That’s also reason nobody noticed on the other architectures. GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release announcment: > * WARNING: Backward-incompatibility! > Number signs (#) appearing inside a macro reference or function invocation > no longer introduce comments and should not be escaped with backslashes: > thus a call such as: > foo := $(shell echo '#') > is legal. Previously the number sign needed to be escaped, for example: > foo := $(shell echo '\#') > Now this latter will resolve to "\#". If you want to write makefiles > portable to both versions, assign the number sign to a variable: > H := \# > foo := $(shell echo '$H') > This was claimed to be fixed in 3.81, but wasn't, for some reason. > To detect this change search for 'nocomment' in the .FEATURES variable. So, do the same as commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make") and commit 929bef467771 ("bpf: Use $(pound) instead of \# in Makefiles") and define and use a $(pound) variable. Reference for the change in make: https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Cc: Matt Brown <matthew.brown.dev@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08lib/test: use after free in register_test_dev_kmod()Dan Carpenter1-0/+1
[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ] The "test_dev" pointer is freed but then returned to the caller. Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08vsprintf: Fix %pK with kptr_restrict == 0Christophe Leroy1-15/+21
[ Upstream commit 84842911322fc6a02a03ab9e728a48c691fe3efd ] Although kptr_restrict is set to 0 and the kernel is booted with no_hash_pointers parameter, the content of /proc/vmallocinfo is lacking the real addresses. / # cat /proc/vmallocinfo 0x(ptrval)-0x(ptrval) 8192 load_module+0xc0c/0x2c0c pages=1 vmalloc 0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc 0x(ptrval)-0x(ptrval) 12288 start_kernel+0x4e0/0x690 pages=2 vmalloc 0x(ptrval)-0x(ptrval) 8192 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap 0x(ptrval)-0x(ptrval) 12288 _mpic_map_mmio.constprop.0+0x20/0x44 phys=0x80041000 ioremap ... According to the documentation for /proc/sys/kernel/, %pK is equivalent to %p when kptr_restrict is set to 0. Fixes: 5ead723a20e0 ("lib/vsprintf: no_hash_pointers prints all addresses as unhashed") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/107476128e59bff11a309b5bf7579a1753a41aca.1645087605.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08lib: uninline simple_strntoull() as wellAlexey Dobriyan1-2/+1
[ Upstream commit 839b395eb9c13ae56ea5fc3ca9802734a72293f0 ] Codegen become bloated again after simple_strntoull() introduction add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224) Function old new delta simple_strtoul 5 2 -3 simple_strtol 23 20 -3 simple_strtoull 119 15 -104 simple_strtoll 155 41 -114 Link: https://lkml.kernel.org/r/YVmlB9yY4lvbNKYt@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08vsprintf: Fix potential unaligned accessAndy Shevchenko1-5/+7
[ Upstream commit d75b26f880f60ead301e79ba0f4a635c5a60767f ] The %p4cc specifier in some cases might get an unaligned pointer. Due to this we need to make copy to local variable once to avoid potential crashes on some architectures due to improper access. Fixes: af612e43de6d ("lib/vsprintf: Add support for printing V4L2 and DRM fourccs") Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220127181233.72910-1-andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08kunit: make kunit_test_timeout compatible with commentPeng Liu1-1/+1
[ Upstream commit bdd015f7b71b92c2e4ecabac689642cc72553e04 ] In function kunit_test_timeout, it is declared "300 * MSEC_PER_SEC" represent 5min. However, it is wrong when dealing with arm64 whose default HZ = 250, or some other situations. Use msecs_to_jiffies to fix this, and kunit_test_timeout will work as desired. Link: https://lkml.kernel.org/r/20220309083753.1561921-3-liupeng256@huawei.com Fixes: 5f3e06208920 ("kunit: test: add support for test abort") Signed-off-by: Peng Liu <liupeng256@huawei.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Tested-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Wang Kefeng <wangkefeng.wang@huawei.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08lib/raid6/test: fix multiple definition linking errorDirk Müller1-1/+0
commit a5359ddd052860bacf957e65fe819c63e974b3a6 upstream. GCC 10+ defaults to -fno-common, which enforces proper declaration of external references using "extern". without this change a link would fail with: lib/raid6/test/algos.c:28: multiple definition of `raid6_call'; lib/raid6/test/test.c:22: first defined here the pq.h header that is included already includes an extern declaration so we can just remove the redundant one here. Cc: <stable@vger.kernel.org> Signed-off-by: Dirk Müller <dmueller@suse.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-19ARM: 9178/1: fix unmet dependency on BITREVERSE for HAVE_ARCH_BITREVERSEJulian Braha1-1/+0
[ Upstream commit 11c57c3ba94da74c3446924260e34e0b1950b5d7 ] Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :) When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n] This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE. This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23lib/iov_iter: initialize "flags" in new pipe_bufferMax Kellermann1-0/+2
commit 9d2231c5d74e13b2a0546fee6737ee4446017903 upstream. The functions copy_page_to_iter_pipe() and push_pipe() can both allocate a new pipe_buffer, but the "flags" member initializer is missing. Fixes: 241699cd72a8 ("new iov_iter flavour: pipe-backed") To: Alexander Viro <viro@zeniv.linux.org.uk> To: linux-fsdevel@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() testAndrey Konovalov1-0/+1
commit e073e5ef90298d2d6e5e7f04b545a0815e92110c upstream. Make do_kmem_cache_size_bulk() destroy the cache it creates. Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com Fixes: 03a9349ac0e0 ("lib/test_meminit: add a kmem_cache_alloc_bulk() test") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_faultAlistair Popple1-0/+24
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream. hmm_range_fault() can be used instead of get_user_pages() for devices which allow faulting however unlike get_user_pages() it will return an error when used on a VM_MIXEDMAP range. To make hmm_range_fault() more closely match get_user_pages() remove this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL case in hmm_vma_handle_pte(). Rather than replicating the logic of vm_normal_page() call it directly and do a check for the zero pfn similar to what get_user_pages() currently does. Also add a test to hmm selftest to verify functionality. Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27kunit: Don't crash if no parameters are generatedDavid Gow1-8/+10
[ Upstream commit 37dbb4c7c7442dbfc9b651e4ddd4afe30b26afc9 ] It's possible that a parameterised test could end up with zero parameters. At the moment, the test function will nevertheless be called with NULL as the parameter. Instead, don't try to run the test code, and just mark the test as SKIPped. Reported-by: Daniel Latypov <dlatypov@google.com> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27lib/mpi: Add the return value check of kcalloc()Zizhuang Deng1-0/+2
[ Upstream commit dd827abe296fe4249b2f8c9b95f72f814ea8348c ] Add the return value check of kcalloc() to avoid potential NULL ptr dereference. Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library") Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com> Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27lib/logic_iomem: Fix operation on 32-bitJohannes Berg1-3/+3
[ Upstream commit 4e8a5edac5010820e7c5303fc96f5a262e096bb6 ] On 32-bit, the first entry might be at 0/NULL, but that's strange and leads to issues, e.g. where we check "if (ret)". Use a IOREMAP_BIAS/IOREMAP_MASK of 0x80000000UL to avoid this. This then requires reducing the number of areas (via MAX_AREAS), but we still have 128 areas, which is enough. Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27lib/logic_iomem: Fix 32-bit buildJohannes Berg1-6/+7
[ Upstream commit 4e84139e14af5ea60772cc4f33d7059aec76e0eb ] On a 32-bit build, the (unsigned long long) casts throw warnings (or errors) due to being to a different integer size. Cast to uintptr_t first (with the __force for sparse) and then further to get the consistent print on 32 and 64-bit. Fixes: ca2e334232b6 ("lib: add iomem emulation (logic_iomem)") Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08siphash: use _unaligned version by defaultArnd Bergmann1-6/+6
commit f7e5b9bfa6c8820407b64eabc1f29c9a87e8993d upstream. On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS because the ordinary load/store instructions (ldr, ldrh, ldrb) can tolerate any misalignment of the memory address. However, load/store double and load/store multiple instructions (ldrd, ldm) may still only be used on memory addresses that are 32-bit aligned, and so we have to use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we may end up with a severe performance hit due to alignment traps that require fixups by the kernel. Testing shows that this currently happens with clang-13 but not gcc-11. In theory, any compiler version can produce this bug or other problems, as we are dealing with undefined behavior in C99 even on architectures that support this in hardware, see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363. Fortunately, the get_unaligned() accessors do the right thing: when building for ARMv6 or later, the compiler will emit unaligned accesses using the ordinary load/store instructions (but avoid the ones that require 32-bit alignment). When building for older ARM, those accessors will emit the appropriate sequence of ldrb/mov/orr instructions. And on architectures that can truly tolerate any kind of misalignment, the get_unaligned() accessors resolve to the leXX_to_cpup accessors that operate on aligned addresses. Since the compiler will in fact emit ldrd or ldm instructions when building this code for ARM v6 or later, the solution is to use the unaligned accessors unconditionally on architectures where this is known to be fast. The _aligned version of the hash function is however still needed to get the best performance on architectures that cannot do any unaligned access in hardware. This new version avoids the undefined behavior and should produce the fastest hash on all architectures we support. Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/ Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/ Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-25printk: restore flushing of NMI buffers on remote CPUs after NMI backtracesNicholas Piggin1-0/+6
commit 5d5e4522a7f404d1a96fd6c703989d32a9c9568d upstream. printk from NMI context relies on irq work being raised on the local CPU to print to console. This can be a problem if the NMI was raised by a lockup detector to print lockup stack and regs, because the CPU may not enable irqs (because it is locked up). Introduce printk_trigger_flush() that can be called another CPU to try to get those messages to the console, call that where printk_safe_flush was previously called. Fixes: 93d102f094be ("printk: remove safe buffers") Cc: stable@vger.kernel.org # 5.15 Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-21string: uninline memcpy_and_padGuenter Roeck1-0/+20
commit 5c4e0a21fae877a7ef89be6dcc6263ec672372b8 upstream. When building m68k:allmodconfig, recent versions of gcc generate the following error if the length of UTS_RELEASE is less than 8 bytes. In function 'memcpy_and_pad', inlined from 'nvmet_execute_disc_identify' at drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 8 bytes from a region of size 7 Discussions around the problem suggest that this only happens if an architecture does not provide strlen(), if -ffreestanding is provided as compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case for m68k. The exact reasons are unknown, but seem to be related to the ability of the compiler to evaluate the return value of strlen() and the resulting execution flow in memcpy_and_pad(). It would be possible to work around the problem by using sizeof(UTS_RELEASE) instead of strlen(UTS_RELEASE), but that would only postpone the problem until the function is called in a similar way. Uninline memcpy_and_pad() instead to solve the problem for good. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-18dyndbg: make dyndbg a known cli paramAndrew Halaney1-0/+12
[ Upstream commit 5ca173974888368fecfb17ae6fe455df5fd2a9d2 ] Right now dyndbg shows up as an unknown parameter if used on boot: Unknown command line parameters: dyndbg=+p That's because it is unknown, it doesn't sit in the __param section, so the processing done to warn users supplying an unknown parameter doesn't think it is legitimate. Install a dummy handler to register it. dynamic debug needs to search the whole command line for modules listed that are currently builtin, so there's no real work to be done in this callback. Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters") Tested-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Link: https://lore.kernel.org/r/1634139622-20667-2-git-send-email-jbaron@akamai.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18bpf/tests: Fix error in tail call limit testsJohan Almbladh1-10/+27
[ Upstream commit 18935a72eb25525b655262579e1652362a3b29bb ] This patch fixes an error in the tail call limit test that caused the test to fail on for x86-64 JIT. Previously, the register R0 was used to report the total number of tail calls made. However, after a tail call fall-through, the value of the R0 register is undefined. Now, all tail call error path tests instead use context state to store the count. Fixes: 874be05f525e ("bpf, tests: Add tail call test suite") Reported-by: Paul Chaignon <paul@cilium.io> Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/bpf/20210914091842.4186267-14-johan.almbladh@anyfinetworks.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18crypto: sm4 - Do not change section of ck and sboxNathan Chancellor1-2/+2
[ Upstream commit 4a7e1e5fc294687a8941fa3eeb4a7e8539ca5e2f ] When building with clang and GNU as, there is a warning about ignored changed section attributes: /tmp/sm4-c916c8.s: Assembler messages: /tmp/sm4-c916c8.s:677: Warning: ignoring changed section attributes for .data..cacheline_aligned "static const" places the data in .rodata but __cacheline_aligned has the section attribute to place it in .data..cacheline_aligned, in addition to the aligned attribute. To keep the alignment but avoid attempting to change sections, use the ____cacheline_aligned attribute, which is just the aligned attribute. Fixes: 2b31277af577 ("crypto: sm4 - create SM4 library based on sm4 generic code") Link: https://github.com/ClangBuiltLinux/linux/issues/1441 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18lib/xz: Validate the value before assigning it to an enum variableLasse Collin1-3/+3
[ Upstream commit 4f8d7abaa413c34da9d751289849dbfb7c977d05 ] This might matter, for example, if the underlying type of enum xz_check was a signed char. In such a case the validation wouldn't have caught an unsupported header. I don't know if this problem can occur in the kernel on any arch but it's still good to fix it because some people might copy the XZ code to their own projects from Linux instead of the upstream XZ Embedded repository. This change may increase the code size by a few bytes. An alternative would have been to use an unsigned int instead of enum xz_check but using an enumeration looks cleaner. Link: https://lore.kernel.org/r/20211010213145.17462-3-xiang@kernel.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18lib/xz: Avoid overlapping memcpy() with invalid input with in-place ↵Lasse Collin2-3/+20
decompression [ Upstream commit 83d3c4f22a36d005b55f44628f46cc0d319a75e8 ] With valid files, the safety margin described in lib/decompress_unxz.c ensures that these buffers cannot overlap. But if the uncompressed size of the input is larger than the caller thought, which is possible when the input file is invalid/corrupt, the buffers can overlap. Obviously the result will then be garbage (and usually the decoder will return an error too) but no other harm will happen when such an over-run occurs. This change only affects uncompressed LZMA2 chunks and so this should have no effect on performance. Link: https://lore.kernel.org/r/20211010213145.17462-2-xiang@kernel.org Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-18iov_iter: Fix iov_iter_get_pages{,_alloc} page fault return valueAndreas Gruenbacher1-2/+3
[ Upstream commit 814a66741b9ffb5e1ba119e368b178edb0b7322d ] Both iov_iter_get_pages and iov_iter_get_pages_alloc return the number of bytes of the iovec they could get the pages for. When they cannot get any pages, they're supposed to return 0, but when the start of the iovec isn't page aligned, the calculation goes wrong and they return a negative value. Fix both functions. In addition, change iov_iter_get_pages_alloc to return NULL in that case to prevent resource leaks. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-12kfence: default to dynamic branch instead of static keys modeMarco Elver1-11/+15
commit 4f612ed3f748962cbef1316ff3d323e2b9055b6e upstream. We have observed that on very large machines with newer CPUs, the static key/branch switching delay is on the order of milliseconds. This is due to the required broadcast IPIs, which simply does not scale well to hundreds of CPUs (cores). If done too frequently, this can adversely affect tail latencies of various workloads. One workaround is to increase the sample interval to several seconds, while decreasing sampled allocation coverage, but the problem still exists and could still increase tail latencies. As already noted in the Kconfig help text, there are trade-offs: at lower sample intervals the dynamic branch results in better performance; however, at very large sample intervals, the static keys mode can result in better performance -- careful benchmarking is recommended. Our initial benchmarking showed that with large enough sample intervals and workloads stressing the allocator, the static keys mode was slightly better. Evaluating and observing the possible system-wide side-effects of the static-key-switching induced broadcast IPIs, however, was a blind spot (in particular on large machines with 100s of cores). Therefore, a major downside of the static keys mode is, unfortunately, that it is hard to predict performance on new system architectures and topologies, but also making conclusions about performance of new workloads based on a limited set of benchmarks. Most distributions will simply select the defaults, while targeting a large variety of different workloads and system architectures. As such, the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is only recommended after careful evaluation. For reference, on x86-64 the condition in kfence_alloc() generates exactly 2 instructions in the kmem_cache_alloc() fast-path: | ... | cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate> | je ffffffff812d6003 <kmem_cache_alloc+0x243> | ... which, given kfence_allocation_gate is infrequently modified, should be well predicted by most CPUs. Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-12Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: - Fixes to address the structleak plugin causing the stack frame size to grow immensely when used with KUnit. Fixes include adding a new makefile to disable structleak and using it from KUnit iio, device property, thunderbolt, and bitfield tests to disable it. - KUnit framework reference count leak in kfree_at_end - KUnit tool fix to resolve conflict between --json and --raw_output and generate correct test output in either case. - kernel-doc warnings due to mismatched arg names * tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: fix kernel-doc warnings due to mismatched arg names bitfield: build kunit tests without structleak plugin thunderbolt: build kunit tests without structleak plugin device property: build kunit tests without structleak plugin iio/test-format: build kunit tests without structleak plugin gcc-plugins/structleak: add makefile var for disabling structleak kunit: fix reference count leak in kfree_at_end kunit: tool: better handling of quasi-bool args (--json, --raw_output)
2021-10-07bitfield: build kunit tests without structleak pluginArnd Bergmann1-1/+1
The structleak plugin causes the stack frame size to grow immensely: lib/bitfield_kunit.c: In function 'test_bitfields_constants': lib/bitfield_kunit.c:93:1: error: the frame size of 7440 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Turn it off in this file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-10-01kunit: fix reference count leak in kfree_at_endXiyu Yang1-2/+2
The reference counting issue happens in the normal path of kfree_at_end(). When kunit_alloc_and_get_resource() is invoked, the function forgets to handle the returned resource object, whose refcount increased inside, causing a refcount leak. Fix this issue by calling kunit_alloc_resource() instead of kunit_alloc_and_get_resource(). Fixed the following when applying: Shuah Khan <skhan@linuxfoundation.org> CHECK: Alignment should match open parenthesis + kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL, (void *)to_free); Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Daniel Latypov <dlatypov@google.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2021-09-25lib/zlib_inflate/inffast: check config in C to avoid unused function warningPaul Menzel1-7/+6
Building Linux for ppc64le with Ubuntu clang version 12.0.0-3ubuntu1~21.04.1 shows the warning below. arch/powerpc/boot/inffast.c:20:1: warning: unused function 'get_unaligned16' [-Wunused-function] get_unaligned16(const unsigned short *p) ^ 1 warning generated. Fix it by moving the check from the preprocessor to C, so the compiler sees the use. Link: https://lkml.kernel.org/r/20210920084332.5752-1-pmenzel@molgen.mpg.de Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-25xtensa: increase size of gcc stack frame checkGuenter Roeck1-1/+1
xtensa frame size is larger than the frame size for almost all other architectures. This results in more than 50 "the frame size of <n> is larger than 1024 bytes" errors when trying to build xtensa:allmodconfig. Increase frame size for xtensa to 1536 bytes to avoid compile errors due to frame size limits. Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-25kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESSMarco Elver1-0/+2
In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is checked for instrumentation-based modes. However, if HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected. To fix, also make the software modes depend on CC_HAS_WORKING_NOSANITIZE_ADDRESS. Link: https://lkml.kernel.org/r/20210910084240.1215803-1-elver@google.com Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS") Signed-off-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-20pci_iounmap'2: Electric Boogaloo: try to make sense of it allLinus Torvalds1-0/+43
Nathan Chancellor reports that the recent change to pci_iounmap in commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") causes build errors on arm64. It took me about two hours to convince myself that I think I know what the logic of that mess of #ifdef's in the <asm-generic/io.h> header file really aim to do, and rewrite it to be easier to follow. Famous last words. Anyway, the code has now been lifted from that grotty header file into lib/pci_iomap.c, and has fairly extensive comments about what the logic is. It also avoids indirecting through another confusing (and badly named) helper function that has other preprocessor config conditionals. Let's see what odd architecture did something else strange in this area to break things. But my arm64 cross build is clean. Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-17Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+36
Pull io_uring iov_iter retry fixes from Jens Axboe: "This adds a helper to save/restore iov_iter state, and modifies io_uring to use it. After that is done, we can now kill the iter->truncated addition that we added for this release. The io_uring change is being overly cautious with the save/restore/advance, but better safe than sorry and we can always improve that and reduce the overhead if it proves to be of concern. The only case to be worried about in this regard is huge IO, where iteration can take a while to iterate segments. I spent some time writing test cases, and expanded the coverage quite a bit from the last posting of this. liburing carries this regression test case now: https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c which exercises all of this. It now also supports provided buffers, and explicitly tests for end-of-file/device truncation as well. On top of that, Pavel sanitized the IOPOLL retry path to follow the exact same pattern as normal IO" * tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block: io_uring: move iopoll reissue into regular IO path Revert "iov_iter: track truncated size" io_uring: use iov_iter state save/restore helpers iov_iter: add helper to save iov_iter state
2021-09-17net: update NXP copyright textVladimir Oltean1-1/+1
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14memblock: introduce saner 'memblock_free_ptr()' interfaceLinus Torvalds1-1/+1
The boot-time allocation interface for memblock is a mess, with 'memblock_alloc()' returning a virtual pointer, but then you are supposed to free it with 'memblock_free()' that takes a _physical_ address. Not only is that all kinds of strange and illogical, but it actually causes bugs, when people then use it like a normal allocation function, and it fails spectacularly on a NULL pointer: https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/ or just random memory corruption if the debug checks don't catch it: https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/ I really don't want to apply patches that treat the symptoms, when the fundamental cause is this horribly confusing interface. I started out looking at just automating a sane replacement sequence, but because of this mix or virtual and physical addresses, and because people have used the "__pa()" macro that can take either a regular kernel pointer, or just the raw "unsigned long" address, it's all quite messy. So this just introduces a new saner interface for freeing a virtual address that was allocated using 'memblock_alloc()', and that was kept as a regular kernel pointer. And then it converts a couple of users that are obvious and easy to test, including the 'xbc_nodes' case in lib/bootconfig.c that caused problems. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-14iov_iter: add helper to save iov_iter stateJens Axboe1-0/+36
In an ideal world, when someone is passed an iov_iter and returns X bytes, then X bytes would have been consumed/advanced from the iov_iter. But we have use cases that always consume the entire iterator, a few examples of that are iomap and bdev O_DIRECT. This means we cannot rely on the state of the iov_iter once we've called ->read_iter() or ->write_iter(). This would be easier if we didn't always have to deal with truncate of the iov_iter, as rewinding would be trivial without that. We recently added a commit to track the truncate state, but that grew the iov_iter by 8 bytes and wasn't the best solution. Implement a helper to save enough of the iov_iter state to sanely restore it after we've called the read/write iterator helpers. This currently only works for IOVEC/BVEC/KVEC as that's all we need, support for other iterator types are left as an exercise for the reader. Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wiacKV4Gh-MYjteU0LwNBSGpWrK-Ov25HdqB1ewinrFPg@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-13Merge branch 'gcc-min-version-5.1' (make gcc-5.1 the minimum version)Linus Torvalds1-1/+1
Merge patch series from Nick Desaulniers to update the minimum gcc version to 5.1. This is some of the left-overs from the merge window that I didn't want to deal with yesterday, so it comes in after -rc1 but was sent before. Gcc-4.9 support has been an annoyance for some time, and with -Werror I had the choice of applying a fairly big patch from Kees Cook to remove a fair number of initializer warnings (still leaving some), or this patch series from Nick that just removes the source of the problem. The initializer cleanups might still be worth it regardless, but honestly, I preferred just tackling the problem with gcc-4.9 head-on. We've been more aggressiuve about no longer having to care about compilers that were released a long time ago, and I think it's been a good thing. I added a couple of patches on top to sort out a few left-overs now that we no longer support gcc-4.x. As noted by Arnd, as a result of this minimum compiler version upgrade we can probably change our use of '--std=gnu89' to '--std=gnu11', and finally start using local loop declarations etc. But this series does _not_ yet do that. Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/ Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/ Link: https://github.com/ClangBuiltLinux/linux/issues/1438 * emailed patches from Nick Desaulniers <ndesaulniers@google.com>: Drop some straggling mentions of gcc-4.9 as being stale compiler_attributes.h: drop __has_attribute() support for gcc4 vmlinux.lds.h: remove old check for GCC 4.9 compiler-gcc.h: drop checks for older GCC versions Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround arm64: remove GCC version check for ARCH_SUPPORTS_INT128 powerpc: remove GCC version check for UPD_CONSTR riscv: remove Kconfig check for GCC version for ARCH_RV64I Kconfig.debug: drop GCC 5+ version check for DWARF5 mm/ksm: remove old GCC 4.9+ check compiler.h: drop fallback overflow checkers Documentation: raise minimum supported version of GCC to 5.1
2021-09-13Kconfig.debug: drop GCC 5+ version check for DWARF5Nick Desaulniers1-1/+1
Now that the minimum supported version of GCC is 5.1, we no longer need this Kconfig version check for CONFIG_DEBUG_INFO_DWARF5. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-11Merge tag 'trace-v5.15-3' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Minor fixes to the processing of the bootconfig tree" * tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey() tracing/boot: Fix to check the histogram control param is a leaf node tracing/boot: Fix trace_boot_hist_add_array() to check array is value
2021-09-10bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()Masami Hiramatsu1-4/+4
Rename xbc_node_find_child() to xbc_node_find_subkey() for clarifying that function returns a key node (no value node). Since there are xbc_node_for_each_child() (loop on all child nodes) and xbc_node_for_each_subkey() (loop on only subkey nodes), this name distinction is necessary to avoid confusing users. Link: https://lkml.kernel.org/r/163119459826.161018.11200274779483115300.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-05-20 09:33:33 +0300