summaryrefslogtreecommitdiff
path: root/scripts/dtc
AgeCommit message (Collapse)AuthorFilesLines
2018-12-13Merge branch 'yaml-bindings-for-v4.21' into dt/nextRob Herring1-0/+4
2018-12-13kbuild: Add support for DT binding schema checksRob Herring1-0/+4
This adds the build infrastructure for checking DT binding schema documents and validating dts files using the binding schema. Check DT binding schema documents: make dt_binding_check Build dts files and check using DT binding schema: make dtbs_check Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to use for validation. This makes it easier to find and fix errors generated by a specific schema. Currently, the validation targets are separate from a normal build to avoid a hard dependency on the external DT schema project and because there are lots of warnings generated. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-doc@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-29scripts/dtc: Update to upstream version v1.4.7-57-gf267e674d145Rob Herring17-147/+436
This adds the following commits from upstream: f267e674d145 checks: Fix crash with multiple source annotations 3616b9a811b6 checks: Use source position information for check failures 2bdbd07a1223 checks: Make each message output atomic a1eff70c02cf util: Add xa{v}sprintf_append functions 82a52ce4573b libfdt: Add a test for fdt_getprop_by_offset() 607b8586b383 PEP8 / Flake8 cleanups for setup.py f9c0a425b648 Remove broken objdir / srcdir support 5182b5e6f28c pylibfdt: Use common PREFIX variable d45bf1f5f2a6 Refine make tests_clean target 99284c4db9cb Refine pylibfdt_clean target a4629cfaedfb Refine libfdt_clean target 08380fc43aa2 tests: Use modern octal literals for Python 8113c00b99d3 pylibfdt: Allow switch to Python 3 via environment variable PYTHON 11738cf01f15 libfdt: Don't use memcpy to handle unaligned reads on ARM 86a288a73670 checks: Restructure check_msg to decrease indentation 5667e7ef9a9a annotations: add the annotation functionality 8e20ccf52f90 annotations: add positions ca930e20bb54 tests: Don't lose errors from make checkm 43366bb4eeee tests: Property count valgrind errors in wrapped tests 5062516fb8cb srcpos: Remove srcpos_empty a3143fafbf83 Revert "annotations: add positions" 403cc79f06a1 checks: Update SPI bus check for 'spi-slave' baa1d2cf7894 annotations: add positions ff2ad38f6a5a Merge remote-tracking branch 'origin/pr/18' aa7254d9cb17 libfdt: return correct value if #size-cells property is not present 49903aed7783 use ptrdiff_t modifier for printing pointer differences da2b691ccf68 treesource: Fix dts output for phandles in middle of a sequence of ints 8f8b77a0d62d tests: Wrap check_align() calls with base_run_test() 522d81d572f2 Fix dts output with a REF_PATH marker e45198c98359 Added test cases for target references 0fcffda15e9f Merge nodes with local target label references 1e4a0928f3b3 pylibfdt: Don't have setup.py depend on where it's invoked from ca399b14956f pylibfdt: Eliminate run_setup make function 98972f1b3e33 pylibfdt: Improved version extraction 7ba2be6cda5f pylibfdt: Don't silence setup.py when V=1 7691f9d39301 pylibfdt: Make SETUP make variable 855b9963def9 pylibfdt: Simpler CFLAGS handling 47cafbeeb977 pylibfdt: Link extension module with libfdt rather than rebuilding dd695d6afb19 pylibfdt: Correctly set build output directory 59327523d0d8 pylibfdt: We don't need include files from the base directory e84742aa7b93 checks: fix simple-bus compatible matching 8c59a97ce096 Fix missing labels when emitting dts format d448f9a5fd94 Revert dts output formatting changes of spaces around brackets Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-04Merge branch 'all-dtbs' into dt/nextRob Herring1-1/+1
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring1-1/+1
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-20scripts/dtc: Update to upstream version v1.4.7-14-gc86da84d30e4Rob Herring23-236/+1033
Major changes are I2C and SPI bus checks, YAML output format (for future validation), some new libfdt functions, and more libfdt validation of dtbs. The YAML addition adds an optional dependency on libyaml. pkg-config is used to test for it and pkg-config became a kconfig dependency in 4.18. This adds the following commits from upstream: c86da84d30e4 Add support for YAML encoded output 361b5e7d8067 Make type_marker_length helper public bfbfab047e45 pylibfdt: Add a means to add and delete notes 9005f4108e7c pylibfdt: Allow delprop() to return errors b94c056b137e Make valgrind optional fd06c54d4711 tests: Better testing of dtc -I fs mode c3f50c9a86d9 tests: Allow dtbs_equal_unordered to ignore mem reserves 0ac9fdee37c7 dtc: trivial '-I fs -O dts' test 0fd1c8c783f3 pylibfdt: fdt_get_mem_rsv returns 2 uint64_t values 04853cad18f4 pylibfdt: Don't incorrectly / unnecessarily override uint64_t typemap 9619c8619c37 Kill bogus TYPE_BLOB marker type ac68ff92ae20 parser: add TYPE_STRING marker to path references 90a190eb04d9 checks: add SPI bus checks 53a1bd546905 checks: add I2C bus checks 88f18909db73 dtc: Bump version to v1.4.7 85bce8b2f06d tests: Correction to vg_prepare_blob() 57f7f9e7bc7c tests: Don't call memcmp() with NULL arguments c12b2b0c20eb libfdt: fdt_address_cells() and fdt_size_cells() 3fe0eeda0b7f livetree: Set phandle properties type to uint32 853649acceba pylibfdt: Support the sequential-write interface 9b0e4fe26093 tests: Improve fdt_resize() tests 1087504bb3e8 libfdt: Add necessary header padding in fdt_create() c72fa777e613 libfdt: Copy the struct region in fdt_resize() 32b9c6130762 Preserve datatype markers when emitting dts format 6dcb8ba408ec libfdt: Add helpers for accessing unaligned words 42607f21d43e tests: Fix incorrect check name 'prop_name_chars' 9d78c33bf8a1 tests: fix grep for checks error messages b770f3d1c13f pylibfdt: Support setting the name of a node 2f0d07e678e0 pylibfdt: Add functions to set and get properties as strings 354d3dc55939 pylibfdt: Update the bytearray size with pack() 3c374d46acce pylibfdt: Allow reading integer values from properties 49d32ce40bb4 pylibfdt: Use an unsigned type for fdt32_t 481246a0c13a pylibfdt: Avoid accessing the internal _fdt member in tests 9aafa33d99ed pylibfdt: Add functions to update properties 5a598671fdbf pylibfdt: Support device-tree creation/expansion 483e170625e1 pylibfdt: Add support for reading the memory reserve map 29bb05aa4200 pylibfdt: Add support for the rest of the header functions 582a7159a5d0 pylibfdt: Add support for fdt_next_node() f0f8c9169819 pylibfdt: Reorder functions to match libfdt.h 64a69d123935 pylibfdt: Return string instead of bytearray from getprop() 4d09a83420df fdtput: Add documentation e617cbe1bd67 fdtget: Add documentation 180a93924014 Use <inttypes.h> format specifiers in a bunch of places we should b9af3b396576 scripts/dtc: Fixed format mismatch in fprintf 4b8fcc3d015c libfdt: Add fdt_check_full() function c14223fb2292 tests: Use valgrind client requests for better checking 5b67d2b955a3 tests: Better handling of valgrind errors saving blobs e2556aaeb506 tests: Remove unused #define fb9c6abddaa8 Use size_t for blob lengths in utilfdt_read* 0112fda03bf6 libfdt: Add fdt_header_size() 6473a21d8bfe Consolidate utilfdt_read_len() variants d5db5382c5e5 libfdt: Safer access to memory reservations 719d582e98ec libfdt: Propagate name errors in fdt_getprop_by_offset() 70166d62a27f libfdt: Safer access to strings section eb890c0f77dc libfdt: Make fdt_check_header() more thorough 899d6fad93f3 libfdt: Improve sequential write state checking 04b5b4062ccd libfdt: Clean up header checking functions 44d3efedc816 Preserve datatype information when parsing dts f0be81bd8de0 Make Property a subclass of bytearray 24b1f3f064d4 pylibfdt: Add a method to access the device tree directly Signed-off-by: Rob Herring <robh@kernel.org>
2018-09-20scripts/dtc: Add yamltree.c to dtc sourcesRob Herring1-1/+1
dtc has a new source file, yamltree.c, that needs to be copied when syncing dtc sources. Signed-off-by: Rob Herring <robh@kernel.org>
2018-08-22scripts/dtc: consolidate include path options in MakefileMasahiro Yamada1-14/+4
It is tedious to specify extra compiler options for every file. HOST_EXTRACFLAGS is useful to add options to all files in a directory. -I$(src)/libfdt is needed for all the files in this directory to include libfdt_env.h etc. from scripts/dtc/libfdt/. On the other hand, -I$(src) is used to include check-in headers from generated C files. Thus, I added it only to dtc-lexer.lex.o and dtc-parser.tab.o . Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org>
2018-05-15scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bcRob Herring6-16/+261
This adds the following commits from upstream: 84e414b0b5bc tests: Add a test case for the omit-if-no-ref keyword 4038fd90056e dtc: add ability to make nodes conditional on them being referenced e1f139ea4900 checks: drop warning for missing PCI bridge bus-range f4eba68d89ee checks: Print duplicate node name instead of parent name 46df1fb1b211 .travis.yml: Run valgrind checks via Travis 14a3002a1aee tests: Update valgrind suppressions for sw_tree1 02c5fe9debc0 tests: Remove valgrind error from tests/get_path df536831d02c checks: add graph binding checks 2347c96edcbe checks: add a check for duplicate unit-addresses of child nodes 8f1b35f88395 Correct overlay syntactic sugar for generating target-path fragments afbddcd418fb Suppress warnings on overlay fragments 119e27300359 Improve tests for dtc overlay generation Signed-off-by: Rob Herring <robh@kernel.org>
2018-04-24dtc: checks: drop warning for missing PCI bridge bus-rangeRob Herring1-3/+2
Cherry-picked from dtc upstream commit e1f139ea4900fd0324c646822b4061fec6e08321. Having a 'bus-range' property for PCI bridges should not be required, so remove the warning when missing. There was some confusion with the Linux kernel printing a message that no property is present and the OS assigned the bus number. This message was intended to be informational rather than a warning. When the firmware doesn't enumerate the PCI bus and leaves it up to the OS to do, then it is perfectly fine for the OS to assign bus numbers and bus-range is not necessary. There are a few cases where bus-range is needed or useful as Arnd Bergmann summarized: - Traditionally Linux avoided using multiple PCI domains, but instead configured separate PCI host bridges to have non-overlapping bus ranges so we can present them to user space as a single domain, and run the kernel without CONFIG_PCI_DOMAINS. Specifying the bus ranges this way would and give stable bus numbers across boots when the probe order is not fixed. - On certain ARM64 systems, we must only use the first 128 bus numbers based on the way the IOMMU identifies the device with truncated bus/dev/fn number. There are probably others like this, with various limitations. - To leave some room for hotplugged devices, each slot on a host bridge can in theory get a range of bus numbers that are available when assigning bus numbers at boot time Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-04-16Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-12Merge tag 'asm-generic' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "I have one regression fix for a minor build problem after the architecture removal series, plus a rework of the barriers in the readl/writel functions, thanks to work by Sinan Kaya: This started from a discussion on the linuxpcc and rdma mailing lists[1]. To summarize, we decided that architectures are responsible to serialize readl() and writel() accesses on a device MMIO space relative to DMA performed by that device. This series provides a pessimistic implementation of that behavior for asm-generic/io.h, which is in turn used by a number of architectures (h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and xtensa). Some of those presumably need no extra barriers, or something weaker than rmb()/wmb(), and they are advised to override the new default for better performance. For inb()/outb(), the same barriers are used, but architectures might want to add another barrier to outb() here if that can guarantee non-posted behavior (some architectures can, others cannot do that). The readl_relaxed()/writel_relaxed() family of functions retains the existing behavior with no extra barriers" [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: change writeX_relaxed() to remove barriers io: change readX_relaxed() to remove barriers dts: remove cris & metag dts hard link file io: change inX() to have their own IO barrier overrides io: change outX() to have their own IO barrier overrides io: define stronger ordering for the default writeX() implementation io: define stronger ordering for the default readX() implementation io: define several IO & PIO barrier types for the asm-generic version
2018-04-07kbuild: add %.lex.c and %.tab.[ch] to 'targets' automaticallyMasahiro Yamada1-3/+0
Files generated by if_changed* must be added to 'targets' to include *.cmd files. Otherwise, they would be regenerated every time. The build system automatically adds objects to 'targets' where appropriate, such as obj-y, extra-y, etc. but does nothing for intermediate files. So, each Makefile needs to add them by itself. There are some common cases where objects are generated by chained rules. Lexers and parsers are compiled like follows: %.lex.o <- %.lex.c <- %.l %.tab.o <- %.tab.c <- %.y They are common patterns, so it is reasonable to take care of them in the core Makefile instead of requiring each Makefile to do so. At this moment, you cannot delete 'target += zconf.lex.c' in the Kconfig Makefile because zconf.lex.c is included from zconf.tab.c instead of being compiled separately. It should be deleted after Kconfig is more refactored. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-07kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level MakefileMasahiro Yamada1-4/+2
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers, respectively. Clean them up globally from the top Makefile. Some of the final host programs those lexer/parser are linked into are necessary for building external modules, but the intermediates are unneeded. They can be cleaned away by 'make clean' instead of 'make mrproper'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-07.gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignoreMasahiro Yamada1-3/+0
These patterns are common to host programs that require lexer and parser. Move them to the top .gitignore. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-06dts: remove cris & metag dts hard link fileLiu, Changcheng2-2/+0
arch cris & metag have been removed from supported archs. The dts hard link files should also be removed, or the ctags tool will give warning. execute"ctags -R", output: ctags: Warning: cannot open source file "scripts/dtc/include-prefixes/cris" : No such file or directory ctags: Warning: cannot open source file "scripts/dtc/include-prefixes/metag" : No such file or directory Signed-off-by: Liu Changcheng <changcheng.liu@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987Rob Herring20-317/+619
This adds the following commits from upstream: aadd0b65c987 checks: centralize printing of property names in failure messages 88960e398907 checks: centralize printing of node path in check_msg f1879e1a50eb Add limited read-only support for older (V2 and V3) device tree to libfdt. 37dea76e9700 srcpos: drop special handling of tab 65893da4aee0 libfdt: overlay: Add missing license 962a45ca034d Avoid installing pylibfdt when dependencies are missing cd6ea1b2bea6 Makefile: Split INSTALL out into INSTALL_{PROGRAM,LIB,DATA,SCRIPT} 51b3a16338df Makefile.tests: Add LIBDL make(1) variable for portability sake 333d533a8f4d Attempt to auto-detect stat(1) being used if not given proper invocation e54388015af1 dtc: Bump version to v1.4.6 a1fe86f380cb fdtoverlay: Switch from using alloca to malloc c8d5472de3ff tests: Improve compatibility with other platforms c81d389a10cc checks: add chosen node checks e671852042a7 checks: add aliases node checks d0c44ebe3f42 checks: check for #{size,address}-cells without child nodes 18a3d84bb802 checks: add string list check for *-names properties 8fe94fd6f19f checks: add string list check 6c5730819604 checks: add a string check for 'label' property a384191eba09 checks: fix sound-dai phandle with arg property check b260c4f610c0 Fix ambiguous grammar for devicetree rule fe667e382bac tests: Add some basic tests for the pci_bridge checks 7975f6422260 Fix widespread incorrect use of strneq(), replace with new strprefixeq() fca296445eab Add strstarts() helper function cc392f089007 tests: Check non-matching cases for fdt_node_check_compatible() bba26a5291c8 livetree: avoid assertion of orphan phandles with overlays c8f8194d76cc implement strnlen for systems that need it c8b38f65fdec libfdt: Remove leading underscores from identifiers 3b62fdaebfe5 Remove leading underscores from identifiers 2d45d1c5c65e Replace FDT_VERSION() with stringify() 2e6fe5a107b5 Fix some errors in comments b0ae9e4b0ceb tests: Correct warning in sw_tree1.c Commit c8b38f65fdec upstream ("libfdt: Remove leading underscores from identifiers") changed the multiple inclusion define protection, so the kernel's libfdt_env.h needs the corresponding update. Signed-off-by: Rob Herring <robh@kernel.org>
2018-03-06scripts/dtc: generate lexer and parser during build instead of shippingRob Herring5-4713/+5
Now that the kernel build supports flex and bison, remove the _shipped files and generate them during the build instead. Based on Masahiro's original patch. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-15Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds17-231/+1615
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-25scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9Rob Herring2-1/+10
Pickup the fix for handling unresolved phandles in overlays. This adds the following commits from upstream: c1e55a5513e9 checks: fix handling of unresolved phandles for dts plugins f8872e29ce06 tests: Avoid 64-bit arithmetic in assembler 48c91c08bcfa libfdt: add stringlist functions to linker script Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-03scripts/dtc: Update to upstream version v1.4.5-3-gb1a60033c110Rob Herring16-230/+1603
This adds the following commits from upstream: b1a60033c110 tests: Add a test for overlays syntactic sugar 737b2df39cc8 overlay: Add syntactic sugar version of overlays 497432fd2131 checks: Use proper format modifier for size_t 22a65c5331c2 dtc: Bump version to v1.4.5 c575d8059fff Add fdtoverlay to .gitignore b6a6f9490d19 fdtoverlay: Sanity check blob size 8c1eb1526d2d pylibfdt: Use Python2 explicitly ee3d26f6960b checks: add interrupts property check c1e7738988f5 checks: add gpio binding properties check b3bbac02d5e3 checks: add phandle with arg property checks fe50bd1ecc1d fdtget: Split out cell list display into a new function 62d812308d11 README: Add a note about test_tree1.dts 5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset() 46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle() a3ae43723687 pylibfdt: Add support for fdt_parent_offset() a198af80344c pylibfdt: Add support for fdt_get_phandle() b9eba92ea50f tests: Return a failure code when any tests fail 155faf6cc209 pylibfdt: Use local pylibfdt module 50e5cd07f325 pylibfdt: Add a test for use of uint32_t ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t 36f511fb1113 tests: Add stacked overlay tests on fdtoverlay 1bb00655d3e5 fdt: Allow stacked overlays phandle references a33c2247ac8d Introduce fdt_setprop_placeholder() method 0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both e3b9a9588a35 tests: fdtoverlay unit test 42409146f2db fdtoverlay: A tool that applies overlays aae22722fc8d manual: Document missing options 13ce6e1c2fc4 dtc: fix sprintf() format string error, again d990b8013889 Makefile: Fix build on MSYS2 and Cygwin 51f56dedf8ea Clean up shared library compile/link options 21a2bc896e3d Suppress expected error message in fdtdump test 2a42b14d0d03 dtc: check.c fix compile error a10cb3c818d3 Fix get_node_by_path string equality check 548aea2c436a fdtdump: Discourage use of fdtdump c2258841a785 fdtdump: Fix over-zealous version check 9067ee4be0e6 Fix a few whitespace and style nits e56f2b07be38 pylibfdt: Use setup.py to build the swig file 896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON 90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone e20d9658cd8f Add Coverity Scan support b04a2cf08862 pylibfdt: Fix code style in setup.py 1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i 580a9f6c2880 Add a libfdt function to write a property placeholder ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile 9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module e91c652af215 pylibfdt: Enable installation of Python module 8a892fd85d94 pylibfdt: Allow building to be disabled 741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites 14c4171f4f9a pylibfdt: Use package_dir to set the package directory 89a5062ab231 pylibfdt: Use environment to pass C flags and files 4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment 6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/ Signed-off-by: Rob Herring <robh@kernel.org>
2017-10-03scripts/dtc: add fdt_overlay.c and fdt_addresses.c to sync scriptRob Herring1-1/+3
libfdt has gained some new files. We need to include them in the kernel's copy. Reported-by: Kyle Yan <kyan@codeaurora.org> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-20scripts/dtc: dtx_diff - 2nd update of include dts paths to match buildFrank Rowand1-13/+9
Update dtx_diff include paths in the same manner as: commit b12869a8d519 ("of: remove drivers/of/testcase-data from include search path for CPP"), commit 5ffa2aed389c ("of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP"), and commit 50f9ddaf64e1 ("of: search scripts/dtc/include-prefixes path for both CPP and DTC"). Remove proposed include path kernel/dts/, which was never implemented for the dtb build. For the diff case, each source file is compiled separately. For each of those compiles, provide the location of the source file as an include path, not the location of both source files. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-01scripts/dtc: fix '%zx' warningRussell King1-1/+1
dtc uses an incorrect format specifier for printing a uint64_t value. uint64_t may be either 'unsigned long' or 'unsigned long long' depending on the host architecture. Fix this by using %llx and casting to unsigned long long, which ensures that we always have a wide enough variable to print 64 bits of hex. HOSTCC scripts/dtc/checks.o scripts/dtc/checks.c: In function 'check_simple_bus_reg': scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=] snprintf(unit_addr, sizeof(unit_addr), "%zx", reg); ^ scripts/dtc/checks.c:876:2: warning: format '%zx' expects argument of type 'size_t', but argument 4 has type 'uint64_t' [-Wformat=] Link: http://lkml.kernel.org/r/20170829222034.GJ20805@n2100.armlinux.org.uk Fixes: 828d4cdd012c ("dtc: check.c fix compile error") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-20scripts/dtc: dtx_diff - update include dts paths to match buildFrank Rowand1-1/+1
Update the cpp include flags for compiling device tree dts files to match the changes made to the kernel build process in commit d5d332d3f7e8 ("devicetree: Move include prefixes from arch to separate directory"). Cc: <stable@vger.kernel.org> # 4.12 Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-08Merge tag 'kbuild-misc-v4.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull misc Kbuild updates from Masahiro Yamada: - Use more portable shebang for Perl scripts - Remove trailing spaces from GCC version in kernel log - Make initramfs generation deterministic * tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: create deterministic initramfs directory listings scripts/mkcompile_h: Remove trailing spaces from compiler version scripts: Switch to more portable Perl shebang
2017-07-07Merge tag 'devicetree-for-4.13' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - vsprintf format specifier %pOF for device_node's. This will enable us to stop storing the full node names. Conversion of users will happen next cycle. - Update documentation to point to DT specification instead of ePAPR. - Split out graph and property functions to a separate file. - New of-graph functions for ALSA - Add vendor prefixes for RISC-V, Linksys, iWave Systems, Roofull, Itead, and BananaPi. - Improve dtx_diff utility filename printing. * tag 'devicetree-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (32 commits) of: document /sys/firmware/fdt dt-bindings: Add RISC-V vendor prefix vsprintf: Add %p extension "%pOF" for device tree of: find_node_by_full_name rewrite to compare each level of: use kbasename instead of open coding dt-bindings: thermal: add file extension to brcm,ns-thermal of: update ePAPR references to point to Devicetree Specification scripts/dtc: dtx_diff - Show real file names in diff header of: detect invalid phandle in overlay of: be consistent in form of file mode of: make __of_attach_node() static of: address.c header comment typo of: fdt.c header comment typo of: make of_fdt_is_compatible() static dt-bindings: display-timing.txt convert non-ascii characters to ascii Documentation: remove overlay-notes reference to non-existent file dt-bindings: usb: exynos-usb: Add missing required VDD properties dt-bindings: Add vendor prefix for Linksys MAINTAINERS: add device tree ABI documentation file of: Add vendor prefix for iWave Systems Technologies Pvt. Ltd ...
2017-06-22scripts/dtc: dtx_diff - Show real file names in diff headerGeert Uytterhoeven1-1/+1
As the comparison uses process substitution to pass files after conversion to DTS format, the diff header doesn't show the real filenames, but the names of the file descriptors used: --- /dev/fd/63 2017-06-22 11:21:47.531637188 +0200 +++ /dev/fd/62 2017-06-22 11:21:47.531637188 +0200 This is especially annoying when comparing a bunch of DT files in a loop, as the output doesn't show a clue about which files it refers to. Fix this by explicitly passing the original file names to the diff command using the --label option, giving e.g.: --- arch/arm/boot/dts/r8a7791-koelsch.dtb +++ arch/arm/boot/dts/r8a7791-porter.dtb Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-20Merge tag 'devicetree-fixes-for-4.12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - fix missing allocation failure handling in fdt code - fix dtc compile error on 32-bit hosts - revert bad sparse changes causing GCC7 warnings * tag 'devicetree-fixes-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fdt: add missing allocation-failure check dtc: check.c fix compile error Partially Revert "of: fix sparse warnings in fdt, irq, reserved mem, and resolver code"
2017-05-19devicetree: Move include prefixes from arch to separate directoryOlof Johansson15-0/+15
We use a directory under arch/$ARCH/boot/dts as an include path that has links outside of the subtree to find dt-bindings from under include/dt-bindings. That's been working well, but new DT architectures haven't been adding them by default. Recently there's been a desire to share some of the DT material between arm and arm64, which originally caused developers to create symlinks or relative includes between the subtrees. This isn't ideal -- it breaks if the DT files aren't stored in the exact same hierarchy as the kernel tree, and generally it's just icky. As a somewhat cleaner solution we decided to add a $ARCH/ prefix link once, and allow DTS files to reference dtsi (and dts) files in other architectures that way. Original approach was to create these links under each architecture, but it lead to the problem of recursive symlinks. As a remedy, move the include link directories out of the architecture trees into a common location. At the same time, they can now share one directory and one dt-bindings/ link as well. Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks') Reported-by: Russell King <linux@armlinux.org.uk> Reported-by: Omar Sandoval <osandov@osandov.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Rob Herring <robh@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Frank Rowand <frowand.list@gmail.com> Cc: linux-arch <linux-arch@vger.kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-17dtc: check.c fix compile errorShuah Khan1-1/+1
Fix the following compile error found on odroid-xu4: checks.c: In function ‘check_simple_bus_reg’: checks.c:876:41: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t{aka long long unsigned int}’ [-Werror=format=] snprintf(unit_addr, sizeof(unit_addr), "%lx", reg); ^ checks.c:876:41: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘uint64_t {aka long long unsigned int}’ [-Werror=format=] cc1: all warnings being treated as errors Makefile:304: recipe for target 'checks.o' failed make: *** [checks.o] Error 1 Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> [dwg: Correct new format to be correct in general] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-picked from upstream dtc commit 2a42b14d0d03] Signed-off-by: Rob Herring <robh@kernel.org>
2017-05-14scripts: Switch to more portable Perl shebangKamil Rytarowski1-1/+1
The default NetBSD package manager is pkgsrc and it installs Perl along other third party programs under custom and configurable prefix. The default prefix for binary prebuilt packages is /usr/pkg, and the Perl executable lands in /usr/pkg/bin/perl. This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's the most portable solution that should work for almost everybody. Perl's executable is detected automatically. This change switches -w option passed to the executable with more modern "use warnings;" approach. There is no functional change to the default behavior. While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?). Signed-off-by: Kamil Rytarowski <n54@gmx.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-03-30dtc: update warning settings for new bus and node/property name checksRob Herring1-0/+1
dtc gained new warnings checking PCI and simple buses, unit address formatting, and stricter node and property name checking. Disable the new dtc warnings by default as there are 1000s. As before, warnings are enabled with W=1 or W=2. The strict node and property name checks are a bit subjective, so they are only enabled for W=2. Signed-off-by: Rob Herring <robh@kernel.org>
2017-03-22scripts/dtc: Update to upstream version v1.4.4-8-g756ffc4f52f6Rob Herring19-182/+523
This adds the following commits from upstream: 756ffc4f52f6 Build pylibfdt as part of the normal build process 8cb3896358e9 Adjust libfdt.h to work with swig b40aa8359aff Mention pylibfdt in the documentation 12cfb740cc76 Add tests for pylibfdt 50f250701631 Add an initial Python library for libfdt cdbb2b6c7a3a checks: Warn on node name unit-addresses with '0x' or leading 0s 4c15d5da17cc checks: Add bus checks for simple-bus buses 33c3985226d3 checks: Add bus checks for PCI buses 558cd81bdd43 dtc: Bump version to v1.4.4 c17a811c62eb fdtput: Remove star from value_len documentation 194d5caaefcb fdtget: Use @return to document the return value d922ecdd017b tests: Make realloc_fdt() really allocate *fdt 921cc17fec29 libfdt: overlay: Check the value of the right variable 9ffdf60bf463 dtc: Simplify asm_emit_string() implementation 881012e44386 libfdt: Change names of sparse helper macros bad5b28049e5 Fix assorted sparse warnings 672ac09ea04d Clean up gcc attributes 49300f2ade6a dtc: Don't abuse struct fdt_reserve_entry fa8bc7f928ac dtc: Bump version to v1.4.3 34a9886a177f Add printf format attributes f72508e2b6ca Correct some broken printf() like format mismatches 397d5ef0203c libfdt: Add fdt_setprop_empty() 69a1bd6ad3f9 libfdt: Remove undefined behaviour setting empty properties acd1b534a592 Print output filename as part of warning messages 120775eb1cf3 dtc: Use streq() in preference to strcmp() 852e9ecbe197 checks: Add Warning for stricter node name character checking ef0e8f061534 checks: Add Warning for stricter property name character checking 00d7bb1f4b0e dtc: pos parameter to srcpos_string() can't be NULL 95d57726bca4 livetree.c: Fix memory leak 3b9c97093d6e dtc: Fix NULL pointer use in dtlabel + dtref case 43eb551426ea manual: Fix typo it -> in 4baf15f7f13f Makefile: Add tags rule Signed-off-by: Rob Herring <robh@kernel.org>
2017-03-22scripts/dtc: automate getting dtc version and log in update scriptRob Herring1-1/+18
Further automate the dtc update script to fill in the dtc version and commit log. Signed-off-by: Rob Herring <robh@kernel.org>
2017-01-04scripts/dtc: Update to upstream version 0931cea3ba20Rob Herring24-1019/+1661
Sync to upstream dtc commit 0931cea3ba20 ("dtc: fdtdump: check fdt if not in scanning mode"). In particular, this pulls in dtc overlay support. This adds the following commits from upstream: f88865469b65 dtc: Fix memory leak in character literal parsing 00fbb8696b66 Rename boot_info 1ef86ad2c24f dtc: Clean up /dts-v1/ and /plugin/ handling in grammar e3c769aa9c16 dtc: Don't always generate __symbols__ for plugins c96cb3c0169e tests: Don't use -@ on plugin de/recompile tests 66381538ce24 tests: Remove "suppression of fixups" tests ba765b273f0f tests: Clarify dtc overlay tests 6ea8cd944fcd tests: More thorough tests of libfdt overlay application without dtc 7d8ef6e1db97 tests: Correct fdt handling of overlays without fixups and base trees without symbols b4dc0ed8b127 tests: Fix double expansion bugs in test code 3ea879dc0c8f tests: Split overlay tests into those with do/don't exercise dtc plugin generation 47b4d66a2f11 tests: Test auto-alias generation on base tree, not overlay 72e1ad811523 tests: Make overlay/plugin tests unconditional e7b3c3b5951b tests: Add overlay tests 9637e3f772a9 tests: Add check_path test 20f29d8d41f6 dtc: Plugin and fixup support a2c92cac53f8 dtc: Document the dynamic plugin internals 8f70ac39801d checks: Pass boot_info instead of root node ea10f953878f libfdt: add missing errors to fdt_strerror() daa75e8fa594 libfdt: fix fdt_stringlist_search() e28eff5b787a libfdt: fix fdt_stringlist_count() ae97c7722840 tests: overlay: Rename the device tree blobs to be more explicit 96162d2bd9cb tests: overlay: Add test suffix to the compiled blobs 5ce8634733b7 libfdt: Add fdt_overlay_apply to the exported symbols 804a9db90ad2 fdt: strerr: Remove spurious BADOVERLAY e8c3a1a493fa tests: overlay: Move back the bad fixup tests 7a72d89d3f81 libfdt: overlay: Fix symbols and fixups nodes condition cabbaa972cdd libfdt: overlay: Report a bad overlay for mismatching local fixups deb0a5c1aeaa libfdt: Add BADPHANDLE error string 7b7a6be9ba15 libfdt: Don't use 'index' as a local variable name aea8860d831e tests: Add tests cases for the overlay code 0cdd06c5135b libfdt: Add overlay application function 39240cc865cf libfdt: Extend the reach of FDT_ERR_BADPHANDLE 4aa3a6f5e6d9 libfdt: Add new errors for the overlay code 6d1832c9e64b dtc: Remove "home page" link 45fd440a9561 Fix some typing errors in libfdt.h and livetree.c a59be4939c13 Merge tag 'v1.4.2' a34bb721caca dtc: Fix assorted problems in the testcases for the -a option 874f40588d3e Implement the -a option to pad dtb aligned ec02b34c05be dtc: Makefile improvements for release uploading 1ed45d40a137 dtc: Bump version to 1.4.2 36fd7331fb11 libfdt: simplify fdt_del_mem_rsv() d877364e4a0f libfdt: Add fdt_setprop_inplace_namelen_partial 3e9037aaad44 libfdt: Add fdt_getprop_namelen_w 84e0e1346c68 libfdt: Add max phandle retrieval function d29126c90acb libfdt: Add iterator over properties 902d0f0953d0 libfdt: Add a subnodes iterator macro c539075ba8ba fdtput.c: Fix memory leak. f79ddb83e185 fdtget.c: Fix memory leak 1074ee54b63f convert-dtsv0-lexer.l: fix memory leak e24d39a024e6 fdtdump.c: make sure size_t argument to memchr is always unsigned. 44a59713cf05 Remove unused srcpos_dump() function cb9241ae3453 DTC: Fix memory leak on flatname. 1ee0ae24ea09 Simplify check field and macro names 9d97527a8621 Remove property check functions 2e709d158e11 Remove tree check functions c4cb12e193e3 Alter grammar to allow multiple /dts-v1/ tags d71d25d76012 Use xasprintf() in srcpos 9dc404958e9c util: Add xasprintf portable asprintf variant beef80b8b55f Correct a missing space in a fdt_header cast 68d43cec1253 Correct line lengths in libfdt.h b0dbceafd49a Correct space-after-tab in libfdt.h Signed-off-by: Rob Herring <robh@kernel.org>
2016-07-22scripts/dtc: dt_to_config - kernel config options for a devicetreeGaurav Minocha2-1/+1214
Determining which kernel config options need to be enabled for a given devicetree can be a painful process. Create a new tool to find the drivers that may match a devicetree node compatible, find the kernel config options that enable the driver, and optionally report whether the kernel config option is enabled. Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> Signed-off-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-03-29scripts/dtc: Update to upstream version 53bf130b1cddRob Herring4-7/+31
Sync to upstream dtc commit 53bf130b1cdd ("libfdt: simplify fdt_node_check_compatible()"). This adds the following commits from upstream: 53bf130 libfdt: simplify fdt_node_check_compatible() c9d9121 Warn on node name unit-address presence/absence mismatch 2e53f9d Catch unsigned 32bit overflow when parsing flattened device tree offsets Signed-off-by: Rob Herring <robh@kernel.org>
2016-02-12scripts/dtc: Update to upstream commit b06e55c88b9bRob Herring12-111/+390
Sync to upstream dtc commit b06e55c88b9b ("Prevent crash on modulo by zero"). This adds the following commits from upstream: b06e55c Prevent crash on modulo by zero b433450 Fix some bugs in processing of line directives d728ad5 Fix crash on nul character in string escape sequence 1ab2205 Gracefully handle bad octal literals 1937095 Prevent crash on division by zero d0b3ab0 libfdt: Fix undefined behaviour in fdt_offset_ptr() d4c7c25 libfdt: check for potential overrun in _fdt_splice() f58799b libfdt: Add some missing symbols to version.lds af9f26d Remove duplicated -Werror in dtc Makefile 604e61e fdt: Add functions to retrieve strings 8702bd1 fdt: Add a function to get the index of a string 2218387 fdt: Add a function to count strings 554fde2 libfdt: fix comment block of fdt_get_property_namelen() e5e6df7 fdtdump: Fix bug printing bytestrings with negative values 067829e Remove redundant fdtdump test code 897a429 Move fdt_path_offset alias tests to right tests section 2d1417c Add simple .travis.yml f6dbc6c guess output file format 5e78dff guess input file format based on file content or file name 8b927bf tests: convert `echo -n` to `printf` 64c46b0 Fix crash with poorly defined #size-cells Cc: Grant Likely <grant.likely@linaro.org> Tested-by: Frank Rowand <frank.rowand@sonymobile.com> Reviewed-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-02-12scripts/dtc: dtx_diff - add info to error messageFrank Rowand1-4/+10
If kernel config options are not properly set, "make scripts" will not compile dtc. Update the unable to find dtc error message to check the kernel config and give better advice on how to create dtc. Reword another error message to increase clarity. Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2016-01-25dtc: create tool to diff device treesFrank Rowand1-0/+343
Create script to diff device trees. The device tree can be in any of the forms recognized by the dtc compiler: - source - binary blob - file system tree (from /proc/devicetree) If the device tree is a source file, then it is pre-processed in the same way as it would be when built in the linux kernel source tree before diffing. Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-04-30scripts/dtc: Update to upstream version 9d3649bd3be245c9Rob Herring29-1535/+1745
Sync dtc with upstream as of commit 9d3649bd3be2 (Add testcases for fdt_path_offset_namelen()). Signed-off-by: Rob Herring <robh@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: devicetree@vger.kernel.org
2015-04-30scripts/dtc: add missing libfdt and fixups to import scriptGaurav Minocha1-0/+9
The following script is used to import dtc upstream into kernel. It was missing import of dtc/libfdt, with this commit it will include the same. Also, currently in arch and driver code that needs early access to the flattened device tree it is necessary to add specific CFLAGS so that when scripts/dtc/libfdt/libfdt.h is included the C preprocessor is able to locate the libfdt versions of libfdt_env.h and fdt.h without generating an error. So, this script replaces angular brackets with quotation used to include header files fdt.h and libfdt_env.h Signed-off-by: Gaurav Minocha <gaurav.minocha.os@gmail.com> [robh: reword commit headline and add 'git add'] Signed-off-by: Rob Herring <robh@kernel.org>
2014-06-10kbuild: trivial - remove trailing empty linesMasahiro Yamada4-4/+0
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-01-21scripts/dtc: Add a script to update to mainline dtc sourceGrant Likely2-1/+55
A very simple script that automates pulling in a newer version of DTC. Not particularly robust, but a whole lot better than doing it by hand every time. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-01-21scripts/dtc: Update to upstream version v1.4.0Grant Likely6-82/+294
Update to the latest version of dtc with the following notable enhancements and bug fixes: * fdtput: expand fdt if value does not fit * dtc/fdt{get, put}/convert-dtsv0-lexer: convert to new usage helpers * libfdt: Add fdt_next_subnode() to permit easy subnode iteration * utilfdt_read: pass back up the length of data read * util_version: new helper for displaying version info * die: constify format string arg * utilfdt_read_err: use xmalloc funcs * Export fdt_stringlist_contains() * dtc: Drop the '-S is deprecated' warning * dtc/libfdt: sparse fixes * dtc/libfdt: introduce fdt types for annotation by endian checkers * Fix util_is_printable_string * dtc: srcpos_verror() should print to stderr * libfdt: Added missing functions to shared library Shipped bison/flex generated files were built on an Ubuntu 13.10 system. Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-01-21scripts/dtc: Update shipped files to build with bison 2.7.12Grant Likely2-283/+222
Preparation patch before updating to upstream dtc version 1.4.0. This change only contains the changes caused by a new version of bison on the shipped files. There are no functional changes. The shipped files were build on an Ubuntu 13.10 system Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-14dtc: ensure #line directives don't consume data from the next lineGrant Likely2-117/+117
Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS} could match line-break characters. If the #line directive did not contain the optional flags field at the end, this could cause any integer data on the next line to be consumed as part of the #line directive parsing. This could cause syntax errors (i.e. #line parsing consuming the leading 0 from a hex literal 0x1234, leaving x1234 to be parsed as cell data, which is a syntax error), or invalid compilation results (i.e. simply consuming literal 1234 as part of the #line processing, thus removing it from the cell data). Fix this by replacing {WS} with [ \t] so that it can't match line-breaks. Convert all instances of {WS}, even though the other instances should be irrelevant for any well-formed #line directive. This is done for consistency and ultimate safety. [Cherry picked from DTC commit a1ee6f068e1c8dbc62873645037a353d7852d5cc] Reported-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-06-14dtc: Update generated files to output from Bison 2.5Grant Likely2-341/+388
This patch merely updates the generated dtc parser and lexer files to the output generated by Bison 2.5. The previous versions were generated from version 2.4.1. The only reason for this commit is to minimize the diff on the next commit which fixes a bug in the DTC #line directive parsing. Otherwise the Bison changes would be intermingled with the functional changes. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>