summaryrefslogtreecommitdiff
path: root/scripts/kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17kconfig: fix missing choice values in auto.confMasahiro Yamada2-4/+4
Since commit 00c864f8903d ("kconfig: allow all config targets to write auto.conf if missing"), Kconfig creates include/config/auto.conf in the defconfig stage when it is missing. Joonas Kylmälä reported incorrect auto.conf generation under some circumstances. To reproduce it, apply the following diff: | --- a/arch/arm/configs/imx_v6_v7_defconfig | +++ b/arch/arm/configs/imx_v6_v7_defconfig | @@ -345,14 +345,7 @@ CONFIG_USB_CONFIGFS_F_MIDI=y | CONFIG_USB_CONFIGFS_F_HID=y | CONFIG_USB_CONFIGFS_F_UVC=y | CONFIG_USB_CONFIGFS_F_PRINTER=y | -CONFIG_USB_ZERO=m | -CONFIG_USB_AUDIO=m | -CONFIG_USB_ETH=m | -CONFIG_USB_G_NCM=m | -CONFIG_USB_GADGETFS=m | -CONFIG_USB_FUNCTIONFS=m | -CONFIG_USB_MASS_STORAGE=m | -CONFIG_USB_G_SERIAL=m | +CONFIG_USB_FUNCTIONFS=y | CONFIG_MMC=y | CONFIG_MMC_SDHCI=y | CONFIG_MMC_SDHCI_PLTFM=y And then, run: $ make ARCH=arm mrproper imx_v6_v7_defconfig You will see CONFIG_USB_FUNCTIONFS=y is correctly contained in the .config, but not in the auto.conf. Please note drivers/usb/gadget/legacy/Kconfig is included from a choice block in drivers/usb/gadget/Kconfig. So USB_FUNCTIONFS is a choice value. This is probably a similar situation described in commit beaaddb62540 ("kconfig: tests: test defconfig when two choices interact"). When sym_calc_choice() is called, the choice symbol forgets the SYMBOL_DEF_USER unless all of its choice values are explicitly set by the user. The choice symbol is given just one chance to recall it because set_all_choice_values() is called if SYMBOL_NEED_SET_CHOICE_VALUES is set. When sym_calc_choice() is called again, the choice symbol forgets it forever, since SYMBOL_NEED_SET_CHOICE_VALUES is a one-time aid. Hence, we cannot call sym_clear_all_valid() again and again. It is crazy to repeat set and unset of internal flags. However, we cannot simply get rid of "sym->flags &= flags | ~SYMBOL_DEF_USER;" Doing so would re-introduce the problem solved by commit 5d09598d488f ("kconfig: fix new choices being skipped upon config update"). To work around the issue, conf_write_autoconf() stopped calling sym_clear_all_valid(). conf_write() must be changed accordingly. Currently, it clears SYMBOL_WRITE after the symbol is written into the .config file. This is needed to prevent it from writing the same symbol multiple times in case the symbol is declared in two or more locations. I added the new flag SYMBOL_WRITTEN, to track the symbols that have been written. Anyway, this is a cheesy workaround in order to suppress the issue as far as defconfig is concerned. Handling of choices is totally broken. sym_clear_all_valid() is called every time a user touches a symbol from the GUI interface. To reproduce it, just add a new symbol drivers/usb/gadget/legacy/Kconfig, then touch around unrelated symbols from menuconfig. USB_FUNCTIONFS will disappear from the .config file. I added the Fixes tag since it is more fatal than before. But, this has been broken since long long time before, and still it is. We should take a closer look to fix this correctly somehow. Fixes: 00c864f8903d ("kconfig: allow all config targets to write auto.conf if missing") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Reported-by: Joonas Kylmälä <joonas.kylmala@iki.fi> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
2019-07-17kconfig: run olddefconfig instead of oldconfig after merging fragmentsMasahiro Yamada1-1/+1
'make olddefconfig' is non-interactive, so we can drop 'yes'. The behavior is equivalent. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-13Merge tag 'kconfig-v5.3' of ↵Linus Torvalds10-47/+27
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - always require argument for --defconfig and remove the hard-coded arch/$(ARCH)/defconfig path - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig - some code cleanups * tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove meaningless if-conditional in conf_read() kconfig: Fix spelling of sym_is_changable unicore32: rename unicore32_defconfig to defconfig kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG kconfig: add static qualifier to expand_string() kconfig: require the argument of --defconfig kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional
2019-07-11kconfig: remove meaningless if-conditional in conf_read()Masahiro Yamada1-4/+2
sym_is_choice(sym) has already been checked by previous if-block: if (sym_is_choice(sym) || (sym->flags & SYMBOL_NO_WRITE)) continue; Hence, the following code is redundant, and the comment is misleading: if (!sym_is_choice(sym)) continue; /* fall through */ It always takes 'continue', never falls though. Clean up the dead code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-06kconfig: Fix spelling of sym_is_changableMarco Ammon7-17/+17
There is a spelling mistake in "changable", it is corrected to "changeable" and all call sites are updated accordingly. Signed-off-by: Marco Ammon <marco.ammon@fau.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-14docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab2-8/+8
The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-09kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIGMasahiro Yamada1-0/+4
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile, the default path arch/*/defconfig was used. The last users of the default are gone by the following commits: - Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to arch/s390/configs/defconfig") - Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig") Let's set arch/*/configs/defconfig as a new default. This saves KBUILD_DEFCONFIG for some architectures. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-09kconfig: add static qualifier to expand_string()Masahiro Yamada2-2/+2
Now expand_string() is only used in preprocess.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-09kconfig: require the argument of --defconfigMasahiro Yamada3-21/+1
Currently, the argument for --defconfig is optional. If the argument is not passed, the hard-coded default arch/$(ARCH)/defconfig is used. It no longer happens in Linux since the last users of the default are gone by the following commits: - Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to arch/s390/configs/defconfig") - Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig") I want to kill the Linux-specific directory path embedded in the Kconfig binary. The --savedefconfig (reverse operation of --defconfig) requires an argument, so it should not hurt to do likewise for --defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-09kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditionalMasahiro Yamada1-3/+1
With the following two commits applied, all the arch Makefiles define KBUILD_DEFCONFIG. - Commit f3e20ad67b4c ("s390: move arch/s390/defconfig to arch/s390/configs/defconfig") - Commit 986a13769c4b ("alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig") The first conditional in the defconfig rule is always false. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-04kconfig: tests: fix recursive inclusion unit testMasahiro Yamada1-3/+3
Adding SPDX license identifier is pretty safe; however, here is one exception. Since commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig"), "make testconfig" would not pass. When Kconfig detects a circular file inclusion, it displays error messages with a file name and a line number prefixed to each line. The unit test checks if Kconfig emits the error messages correctly (this also checks the line number correctness). Now that the test input has the SPDX license identifier at the very top, the line numbers in the expected stderr should be incremented by 1. Fixes: ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner4-0/+4
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19kconfig: use 'else ifneq' for Makefile to improve readabilityMasahiro Yamada1-3/+1
'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81 or later, which is the requirement for building the kernel since commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81"). Use it to improve the readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kconfig: Terminate menu blocks with a comment in the generated configAlexander Popov1-1/+12
Currently menu blocks start with a pretty header but end with nothing in the generated config. So next config options stick together with the options from the menu block. Let's terminate menu blocks in the generated config with a comment and a newline if needed. Example: ... CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y ... Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada1-2/+2
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-14kconfig: make conf_get_autoconfig_name() staticMasahiro Yamada2-2/+1
This is only used in confdata.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-14kconfig: use snprintf for formatting pathnamesJacob Garber2-2/+3
Valid pathnames will never exceed PATH_MAX, but these file names are unsanitized and can cause buffer overflow if set incorrectly. Use snprintf to avoid this. This was flagged during a Coverity scan of the coreboot project, which also uses kconfig for its build system. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-14kconfig: remove useless NULL pointer check in conf_write_dep()Masahiro Yamada1-2/+0
conf_write_dep() has just one caller: conf_write_dep("include/config/auto.conf.cmd"); "name" always points to a valid string. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-10kconfig: make parent directories for the saved .config as neededMasahiro Yamada3-3/+5
With menuconfig / nconfig, users can input any file path from the "Save" menu, but it fails if the parent directory does not exist. Why not create the parent directory automatically. I think this is a user-friendly behavior. I changed the error messages in menuconfig / nconfig. "Nonexistent directory" is no longer the most likely reason of the failure. Perhaps, the user specified the existing directory, or attempted to write to the location without write permission. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-10kconfig: do not write .config if the content is the sameMasahiro Yamada1-0/+54
Kconfig updates the .config when it exits even if its content is exactly the same as before. Since its timestamp becomes newer than that of other build artifacts, additional processing is invoked, which is annoying. - syncconfig is invoked to update include/config/auto.conf, etc. - kernel/configs.o is recompiled if CONFIG_IKCONFIG is enabled, then vmlinux is relinked as well. If the .config is not changed at all, we do not have to even touch it. Just bail out showing "No change to .config". $ make allmodconfig scripts/kconfig/conf --allmodconfig Kconfig # # configuration written to .config # $ make allmodconfig scripts/kconfig/conf --allmodconfig Kconfig # # No change to .config # Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10kconfig: do not accept a directory for configuration outputMasahiro Yamada1-34/+24
Currently, conf_write() can be called with a directory name instead of a file name. As far as I see, this can happen for menuconfig, nconfig, gconfig. If it is given with a directory path, conf_write() kindly appends getenv("KCONFIG_CONFIG"), but this ends up with hacky dir/basename handling, and screwed up in corner-cases like "what if KCONFIG_CONFIG is an absolute path?" as discussed before: https://patchwork.kernel.org/patch/9910037/ Since conf_write() is already messed up, I'd say "do not do it". Please pass a file path all the time. If a directory path is specified for the configuration output, conf_write() will simply error out. Now that the tmp file is created in the same directory as the .config, the previously reported "what if KCONFIG_CONFIG points to a different file system?" has been solved. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Nicolas Porcel <nicolasporcel06@gmail.com>
2019-05-09kconfig: remove trailing whitespacesMasahiro Yamada2-2/+2
There are still some trailing whitespaces under scripts/kconfig/tests/, but they must be kept. Otherwise, "make testconfig" would break. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-09kconfig: Make nconf-cfg.sh executablePetr Vorel1-0/+0
Although it's not required for the build *conf-cfg.sh scripts to be executable (they're run by CONFIG_SHELL), let's be consistent with other scripts. Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-29kconfig/[mn]conf: handle backspace (^H) keyChangbin Du3-3/+5
Backspace is not working on some terminal emulators which do not send the key code defined by terminfo. Terminals either send '^H' (8) or '^?' (127). But currently only '^?' is handled. Let's also handle '^H' for those terminals. Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kconfig: remove stale lxdialog/.gitignoreMasahiro Yamada1-4/+0
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-13Merge tag 'kconfig-v5.1' of ↵Linus Torvalds7-14/+44
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - rename lexer and parse files - fix 'Save as' menu of xconfig * tag 'kconfig-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix 'Save As' menu of xconfig kconfig: rename zconf.y to parser.y kconfig: rename zconf.l to lexer.l
2019-03-11kconfig: fix 'Save As' menu of xconfigMasahiro Yamada2-7/+36
The 'Save As' menu of xconfig is not working; it always saves the kernel configuration into the default file irrespective of the file chosen in the dialog box. The 'Save' menu always writes into the default file, but it would make more sense to write into the file previously chosen by 'Load' or 'Save As'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27kbuild: move ".config not found!" message from Kconfig to MakefileMasahiro Yamada1-13/+0
If you run "make" in a pristine source tree, currently Kbuild will start to build Kconfig to let it show the error message. It would be more straightforward to check it in Makefile and let it fail immediately. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-13kconfig: rename zconf.y to parser.yMasahiro Yamada4-5/+6
Use a more logical name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-13kconfig: rename zconf.l to lexer.lMasahiro Yamada3-4/+4
Use a more logical name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-14kconfig: clean generated *conf-cfg filesMasahiro Yamada1-1/+1
I accidentally dropped '*' in the previous renaming patch. Revive it so that 'make mrproper' can clean the generated files. Fixes: d86271af6460 ("kconfig: rename generated .*conf-cfg to *conf-cfg") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kconfig: rename generated .*conf-cfg to *conf-cfgMasahiro Yamada2-18/+19
Remove the dot-prefixing since it is just a matter of the .gitignore file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: use assignment instead of define ... endef for filechk_* rulesMasahiro Yamada1-3/+1
You do not have to use define ... endef for filechk_* rules. For simple cases, the use of assignment looks cleaner, IMHO. I updated the usage for scripts/Kbuild.include in case somebody misunderstands the 'define ... endif' is the requirement. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-01-06kconfig: remove unused "file" field of yylval unionMasahiro Yamada1-1/+0
This has never been used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warningMasahiro Yamada1-1/+2
Fix the following warning: no previous prototype for ‘dbg_sym_flags’ [-Wmissing-prototypes] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warningsMasahiro Yamada5-19/+54
Currently, images.c is included by qconf.cc and gconf.c. qconf.cc uses all of xpm_* arrays, but gconf.c only some of them. Hence, lots of "... defined but not used" warnings are displayed while compiling gconf.c Splitting out images.c fixes the warnings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: add static qualifiers to fix gconf warningsMasahiro Yamada1-10/+10
Add "static" to functions that are locally used in gconf.c This fixes some "no previous prototype for ..." warnings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: split the lexer out of zconf.yMasahiro Yamada4-8/+6
Compile zconf.lex.c independently of the other files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: split some C files out of zconf.yMasahiro Yamada7-15/+16
I want to compile each C file independently instead of including all of them from zconf.y. Split out confdata.c, expr.c, symbol.c, and preprocess.c . These are low-hanging fruits. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: convert to SPDX License IdentifierMasahiro Yamada42-140/+57
All files in lxdialog/ are licensed under GPL-2.0+, and the rest are under GPL-2.0. I added GPL-2.0 tags to test scripts in tests/. Documentation/process/license-rules.rst does not suggest anything about the flex/bison files. Because flex does not accept the C++ comment style at the very top of a file, I used the C style for zconf.l, and so for zconf.y for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-28kconfig: remove keyword lookup table entirelyMasahiro Yamada4-147/+69
Commit 7a88488bbc23 ("[PATCH] kconfig: use gperf for kconfig keywords") introduced gperf for the keyword lookup. Then, commit bb3290d91695 ("Remove gperf usage from toolchain") killed the gperf use. As a result, the linear keyword search was left behind. If we do not use gperf, there is no reason to have the separate table of the keywords. Move all keywords back to the lexer. I also refactored the lexer to remove the COMMAND and PARAM states. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: update current_pos in the second lexerMasahiro Yamada1-5/+15
To simplify the generated lexer, let the hand-made lexer update the file name and line number for the parser. I tested this with DEBUG_PARSE, and confirmed the same file names and line numbers were dumped. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: switch to ASSIGN_VAL state in the second lexerMasahiro Yamada1-3/+9
To simplify the generated lexer, switch to the ASSIGN_VAL state in the hand-made lexer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: stop associating kconf_id with yylvalMasahiro Yamada2-23/+20
The lexer has conventionally associated kconf_id data with yylval to carry additional information to the parser. No token is relying on this any more. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: refactor end token rulesMasahiro Yamada1-28/+15
T_ENDMENU, T_ENDCHOICE, T_ENDIF are the last users of kconf_id associated with yylval. Refactor them to not use it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: stop supporting '.' and '/' in unquoted wordsMasahiro Yamada2-4/+3
In my understanding, special characters such as '.' and '/' are supported in unquoted words to use bare file paths in the "source" statement. With the previous commit surrounding all file paths with double quotes, we can drop this. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: use T_WORD instead of T_VARIABLE for variablesMasahiro Yamada2-4/+3
There is no grammatical ambiguity by using T_WORD for variables. The parser can distinguish variables from symbols from the context. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: use specific tokens instead of T_ASSIGN for assignmentsMasahiro Yamada2-5/+13
Currently, the lexer returns T_ASSIGN for all of =, :=, and += associating yylval with the flavor. I want to make the generated lexer as simple as possible. So, the lexer should convert keywords to tokens without thinking about the meaning. = -> T_EQUAL := -> T_COLON_EQUAL += -> T_PLUS_EQUAL Unfortunately, Kconfig uses = instead of == for the equal operator. So, the same token T_EQUAL is used for assignment and comparison. The parser can still distinguish them from the context. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: refactor scanning and parsing "option" propertiesMasahiro Yamada5-52/+41
For the keywords "modules", "defconfig_list", and "allnoconfig_y", the lexer should pass specific tokens instead of generic T_WORD. This simplifies both the lexer and the parser. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-21kconfig: use distinct tokens for type and default propertiesMasahiro Yamada3-32/+47
This commit removes kconf_id::stype to prepare for the entire removal of kconf_id.c To simplify the lexer, I want keywords straight-mapped to tokens. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>