summaryrefslogtreecommitdiff
path: root/scripts/recordmcount.h
AgeCommit message (Collapse)AuthorFilesLines
2020-06-17recordmcount: support >64k sectionsSami Tolvanen1-6/+92
When compiling a kernel with Clang and LTO, we need to run recordmcount on vmlinux.o with a large number of sections, which currently fails as the program doesn't understand extended section indexes. This change adds support for processing binaries with >64k sections. Link: https://lkml.kernel.org/r/20200424193046.160744-1-samitolvanen@google.com Link: https://lore.kernel.org/lkml/CAK7LNARbZhoaA=Nnuw0=gBrkuKbr_4Ng_Ei57uafujZf7Xazgw@mail.gmail.com/ Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-13recordmcount: Fix nop_mcount() functionSteven Rostedt (VMware)1-4/+1
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.home Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3f1df12019f3 ("recordmcount: Rewrite error/success handling") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31recordmcount: Remove redundant cleanup() callsMatt Helsley1-2/+0
Redundant cleanup calls were introduced when transitioning from the old error/success handling via setjmp/longjmp -- the longjmp ensured the cleanup() call only happened once but replacing the success_file()/fail_file() calls with cleanup() meant that multiple cleanup() calls can happen as we return from function calls. In do_file(), looking just before and after the "goto out" jumps we can see that multiple cleanups() are being performed. We remove cleanup() calls from the nested functions because it makes the code easier to review -- the resources being cleaned up are generally allocated and initialized in the callers so freeing them there makes more sense. Other redundant cleanup() calls: mmap_file() is only called from do_file() and, if mmap_file() fails, then we goto out and do cleanup() there too. write_file() is only called from do_file() and do_file() calls cleanup() unconditionally after returning from write_file() therefore the cleanup() calls in write_file() are not necessary. find_secsym_ndx(), called from do_func()'s for-loop, when we are cleaning up here it's obvious that we break out of the loop and do another cleanup(). __has_rel_mcount() is called from two parts of do_func() and calls cleanup(). In theory we move them into do_func(), however these in turn prove redundant so another simplification step removes them as well. Link: http://lkml.kernel.org/r/de197e17fc5426623a847ea7cf3a1560a7402a4b.1564596289.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31recordmcount: Kernel style function signature formattingMatt Helsley1-7/+6
The uwrite() and ulseek() functions are formatted inconsistently with the rest of the file and the kernel overall. While we're making other changes here let's fix this. Link: http://lkml.kernel.org/r/4c67698f734be9867a2aba7035fe0ce59e1e4423.1564596289.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31recordmcount: Rewrite error/success handlingMatt Helsley1-42/+99
Recordmcount uses setjmp/longjmp to manage control flow as it reads and then writes the ELF file. This unusual control flow is hard to follow and check in addition to being unlike kernel coding style. So we rewrite these paths to use regular return values to indicate error/success. When an error or previously-completed object file is found we return an error code following kernel coding conventions -- negative error values and 0 for success when we're not returning a pointer. We return NULL for those that fail and return non-NULL pointers otherwise. One oddity is already_has_rel_mcount -- there we use pointer comparison rather than string comparison to differentiate between previously-processed object files and returning the name of a text section. Link: http://lkml.kernel.org/r/8ba8633d4afe444931f363c8d924bf9565b89a86.1564596289.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31recordmcount: Remove unused fd from uwrite() and ulseek()Matt Helsley1-13/+13
uwrite() works within the pseudo-mapping and extends it as necessary without needing the file descriptor (fd) parameter passed to it. Similarly, ulseek() doesn't need its fd parameter. These parameters were only added because the functions bear a conceptual resemblance to write() and lseek(). Worse, they obscure the fact that at the time uwrite() and ulseek() are called fd_map is not a valid file descriptor. Remove the unused file descriptor parameters that make it look like fd_map is still valid. Link: http://lkml.kernel.org/r/2a136e820ee208469d375265c7b8eb28570749a0.1563992889.git.mhelsley@vmware.com Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-14Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-01recordmcount: Fix spurious mcount entries on powerpcNaveen N. Rao1-1/+2
An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following: # modprobe kprobe_example ftrace-powerpc: Not expected bl: opcode is 3c4c0001 WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318 Modules linked in: CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2 NIP: c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30 REGS: c000000001f2b7b0 TRAP: 0700 Not tainted (5.2.0-rc6-00678-g1c329100b942) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228222 XER: 00000000 CFAR: c0000000002642fc IRQMASK: 0 <snip> NIP [c000000000264318] ftrace_bug+0x90/0x318 LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 Call Trace: [c000000001f2ba40] [0000000000000004] 0x4 (unreliable) [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0 [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130 [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70 Instruction dump: 419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96 39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96 ---[ end trace 4c438d5cebf78381 ]--- ftrace failed to modify [<c0080000012a0008>] 0xc0080000012a0008 actual: 01:00:4c:3c Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: c00000000006af4c Looking at the relocation records in __mcount_loc shows a few spurious entries: RELOCATION RECORDS FOR [__mcount_loc]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_ADDR64 .text.unlikely+0x0000000000000008 0000000000000008 R_PPC64_ADDR64 .text.unlikely+0x0000000000000014 0000000000000010 R_PPC64_ADDR64 .text.unlikely+0x0000000000000060 0000000000000018 R_PPC64_ADDR64 .text.unlikely+0x00000000000000b4 0000000000000020 R_PPC64_ADDR64 .init.text+0x0000000000000008 0000000000000028 R_PPC64_ADDR64 .init.text+0x0000000000000014 The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records: RELOCATION RECORDS FOR [.text.unlikely]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_REL64 .TOC.-0x0000000000000008 0000000000000008 R_PPC64_ENTRY *ABS* 0000000000000014 R_PPC64_REL24 _mcount <snip> The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 378Thomas Gleixner1-2/+1
Based on 1 normalized pattern(s): licensed under the gnu general public license version 2 gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 5 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.993848054@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-29scripts: Fixed printf format mismatchnixiaoming1-1/+1
scripts/kallsyms.c: function write_src: "printf", the #1 format specifier "d" need arg type "int", but the according arg "table_cnt" has type "unsigned int" scripts/recordmcount.c: function do_file: "fprintf", the #1 format specifier "d" need arg type "int", but the according arg "(*w2)(ehdr->e_machine)" has type "unsigned int" scripts/recordmcount.h: function find_secsym_ndx: "fprintf", the #1 format specifier "d" need arg type "int", but the according arg "txtndx" has type "unsigned int" Signed-off-by: nixiaoming <nixiaoming@huawei.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-11-03recordmcount: Fix endianness handling bug for nop_mcountlibin1-1/+1
In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.com Cc: <stable@vger.kernel.org> # 3.0+ Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-26recordmcount/MIPS: Fix possible incorrect mcount_loc table entries in modulesAlex Smith1-2/+2
On MIPS calls to _mcount in modules generate 2 instructions to load the _mcount address (and therefore 2 relocations). The mcount_loc table should only reference the first of these, so the second is filtered out by checking the relocation offset and ignoring ones that immediately follow the previous one seen. However if a module has an _mcount call at offset 0, the second relocation would not be filtered out due to old_r_offset == 0 being taken to mean that the current relocation is the first one seen, and both would end up in the mcount_loc table. This results in ftrace_make_nop() patching both (adjacent) instructions to branches over the _mcount call sequence like so: 0xffffffffc08a8000: 04 00 00 10 b 0xffffffffc08a8014 0xffffffffc08a8004: 04 00 00 10 b 0xffffffffc08a8018 0xffffffffc08a8008: 2d 08 e0 03 move at,ra ... The second branch is in the delay slot of the first, which is defined to be unpredictable - on the platform on which this bug was encountered, it triggers a reserved instruction exception. Fix by initializing old_r_offset to ~0 and using that instead of 0 to determine whether the current relocation is the first seen. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7098/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-23ftrace: Make recordmcount.c handle __fentry__Steven Rostedt1-1/+3
With gcc 4.6.0 the -mfentry feature places the function profiling call at the start of the function. When this is used, the call is to __fentry__ and not mcount. Change recordmcount.c to record both callers to __fentry__ and mcount. Link: http://lkml.kernel.org/r/20120807194058.990674363@goodmis.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: John Reiser <jreiser@bitwagon.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-01-07recordmcount: Fix handling of elf64 big-endian objects.David Daney1-1/+1
In ELF64, the sh_flags field is 64-bits wide. recordmcount was erroneously treating it as a 32-bit wide field. For little endian objects this works because the flags of interest (SHF_EXECINSTR) reside in the lower 32 bits of the word, and you get the same result with either a 32-bit or 64-bit read. Big endian objects on the other hand do not work at all with this error. The fix: Correctly treat sh_flags as 64-bits wide in elf64 objects. The symptom I observed was that my __start_mcount_loc..__stop_mcount_loc was empty even though ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/1324345362-12230-1-git-send-email-ddaney.cavm@gmail.com Cc: stable@kernel.org # 3.0+ Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-26ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARMRabin Vincent1-0/+8
While find_secsym_ndx often finds the unamed local STT_SECTION, if a section has only one function in it, the ARM toolchain generates the STT_FUNC symbol before the STT_SECTION, and recordmcount finds this instead. This is problematic on ARM because in ARM ELFs, "if a [STT_FUNC] symbol addresses a Thumb instruction, its value is the address of the instruction with bit zero set (in a relocatable object, the section offset with bit zero set)". This leads to incorrect mcount addresses being recorded. Fix this by not using STT_FUNC symbols as the base on ARM. Signed-off-by: Rabin Vincent <rabin@rab.in> Link: http://lkml.kernel.org/r/1305134631-31617-1-git-send-email-rabin@rab.in Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: mcount address adjustmentMartin Schwidefsky1-2/+7
Introduce mcount_adjust{,_32,_64} to the C implementation of recordmcount analog to $mcount_adjust in the perl script. The adjustment is added to the address of the relocations against the mcount symbol. If this adjustment is done by recordmcount at compile time the ftrace_call_adjust function can be turned into a nop. Cc: John Reiser <jreiser@bitwagon.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: Add helper function get_sym_str_and_relp()Steven Rostedt1-30/+37
The code to get the symbol, string, and relp pointers in the two functions sift_rel_mcount() and nop_mcount() are identical and also non-trivial. Moving this duplicate code into a single helper function makes the code easier to read and more maintainable. Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023739.723658553@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: Remove duplicate code to find mcount symbolSteven Rostedt1-24/+27
The code in sift_rel_mcount() and nop_mcount() to get the mcount symbol number is identical. Replace the two locations with a call to a function that does the work. Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023739.488093407@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: Add warning logic to warn on mcount not recordedSteven Rostedt1-5/+17
There's some sections that should not have mcount recorded and should not have modifications to the that code. But currently they waste some time by calling mcount anyway (which simply returns). As the real answer should be to either whitelist the section or have gcc ignore it fully. This change adds a option to recordmcount to warn when it finds a section that is ignored by ftrace but still contains mcount callers. This is not on by default as developers may not know if the section should be completely ignored or added to the whitelist. Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023738.476989377@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: Make ignored mcount calls into nops at compile timeSteven Rostedt1-4/+78
There are sections that are ignored by ftrace for the function tracing because the text is in a section that can be removed without notice. The mcount calls in these sections are ignored and ftrace never sees them. The downside of this is that the functions in these sections still call mcount. Although the mcount function is defined in assembly simply as a return, this added overhead is unnecessary. The solution is to convert these callers into nops at compile time. A better solution is to add 'notrace' to the section markers, but as new sections come up all the time, it would be nice that they are delt with when they are created. Later patches will deal with finding these sections and doing the proper solution. Thanks to H. Peter Anvin for giving me the right nops to use for x86. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023738.237101176@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/recordmcount: Modify only executable sectionsSteven Rostedt1-0/+1
PROGBITS is not enough to determine if the section should be modified or not. Only process sections that are marked as executable. Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023737.991485123@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-16ftrace/trivial: Clean up recordmcount.c to use Linux style comparisonsSteven Rostedt1-8/+8
The Linux ftrace subsystem style for comparing is: var == 1 var > 0 and not: 1 == var 0 < var It is considered that Linux developers are smart enough not to do the if (var = 1) mistake. Cc: John Reiser <jreiser@bitwagon.com> Link: http://lkml.kernel.org/r/20110421023737.290712238@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-01-05Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and ↵Russell King1-2/+3
'versatile' into devel
2010-12-04ARM: 6511/1: ftrace: add ARM support for C version of recordmcountRabin Vincent1-2/+3
Depending on the compiler version, ARM GCC calls the mcount function either __gnu_mcount_nc or mcount. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-02ftrace: Have recordmcount honor endianness in fn_ELF_R_INFOJohn Reiser1-1/+1
It looks to me like the change which introduced "virtual functions" forgot about cross-platform endianness. Thank you to Arnaud for supplying before+after data files do_mounts*.o. This fixes a MIPS build failure triggered by recordmcount. Reported-by: Arnaud Lacombe <lacombar@gmail.com> Tested-by: Arnaud Lacombe <lacombar@gmail.com> Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: John Reiser <jreiser@BitWagon.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-29ftrace/MIPS: Add module support for C version of recordmcountWu Zhangjin1-3/+53
Since MIPS modules' address space differs from the core kernel space, to access the _mcount in the core kernel, the kernel functions in modules must use long call (-mlong-calls): load the _mcount address into one register and jump to the address stored by the register: c: 3c030000 lui v1,0x0 <--------> b label c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 label: In the old Perl version of recordmcount, we only need to record the position of the 1st R_MIPS_HI16 type of _mcount, and later, in ftrace_make_nop(), replace the instruction in this position by a "b label" and in ftrace_make_call(), replace it back. But, the default C version of recordmcount records all of the _mcount symbols, so, we must filter the 2nd _mcount like the Perl version of recordmcount does. The C version of recordmcount copes with the symbols before they are linked, So It doesn't know the type of the symbols and therefore can not filter the symbols as the Perl version of recordmcount does. But as we can see above, the 2nd _mcount symbols of the long call alawys follows the 1st _mcount symbol of the same long call, which means the offset from the 1st to the 2nd is fixed, it is 0x10-0xc = 4 here, 4 is the length of the 1st load instruciton, for MIPS has fixed length of instructions, this offset is always 4. And as we know, the _mcount is inserted into the entry of every kernel function, the offset between the other _mcount's is expected to be always bigger than 4. So, to filter the 2ns _mcount symbol of the long call, we can simply check the offset between two _mcount symbols, If it is 4, then, filter the 2nd _mcount symbol. To avoid touching too much code, an 'empty' function fn_is_fake_mcount() is added for all of the archs, and the specific archs can override it via chaning the function pointer: is_fake_mcount in do_file() with the e_machine. e.g. This patch adds MIPS_is_fake_mcount() to override the default fn_is_fake_mcount() pointed by is_fake_mcount. This fn_is_fake_mcount() checks if the _mcount symbol is fake, e.g. the 2nd _mcount symbol of the long call is fake, for there are 2 _mcount symbols mapped to one real mcount call, so, one of them is fake and must be filtered. This fn_is_fake_mcount() is called in sift_rel_mcount() after finding the _mcount symbols and before adding the _mcount symbol into mrelp, so, it can prevent the fake mcount symbol going into the last __mcount_loc table. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> LKML-Reference: <b866f0138224340a132d31861fa3f9300dee30ac.1288176026.git.wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29ftrace/MIPS: Add MIPS64 support for C version of recordmcountJohn Reiser1-4/+30
MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount will not work for "segmentation fault". Usage of "union mips_r_info" and the functions MIPS64_r_sym() and MIPS64_r_info() written by Maciej W. Rozycki <macro@linux-mips.org> ---- [1] http://techpubs.sgi.com/library/manuals/4000/007-4658-001/pdf/007-4658-001.pdf [2] arch/mips/include/asm/module.h Tested-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: John Reiser <jreiser@BitWagon.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> LKML-Reference: <AANLkTinwXjLAYACUfhLYaocHD_vBbiErLN3NjwN8JqSy@mail.gmail.com> LKML-Reference: <910dc2d5ae1ed042df4f96815fe4a433078d1c2a.1288176026.git.wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-15ftrace: Remove duplicate code for 64 and 32 bit in recordmcount.cSteven Rostedt1-0/+366
The elf reader for recordmcount.c had duplicate functions for both 32 bit and 64 bit elf handling. This was due to the need of using the 32 and 64 bit elf structures. This patch consolidates the two by using macros to define the 32 and 64 bit names in a recordmcount.h file, and then by just defining a RECORD_MCOUNT_64 macro and including recordmcount.h twice we create the funtions for both the 32 bit version as well as the 64 bit version using one code source. Cc: John Reiser <jreiser@bitwagon.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>