summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)AuthorFilesLines
2020-02-26kbuild: remove unneeded semicolon at the end of cmd_dtb_checkMasahiro Yamada1-1/+1
This trailing semicolon is unneeded. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-26kbuild: fix DT binding schema rule to detect command line changesMasahiro Yamada1-2/+2
This if_change_rule is not working properly; it cannot detect any command line change. The reason is because cmd-check in scripts/Kbuild.include compares $(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here. For if_change_rule to work properly, the stem part of cmd_* and rule_* must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must be named rule_dtc. Fixes: 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-21scripts/get_maintainer.pl: deprioritize old Fixes: addressesDouglas Anderson1-4/+4
Recently, I found that get_maintainer was causing me to send emails to the old addresses for maintainers. Since I usually just trust the output of get_maintainer to know the right email address, I didn't even look carefully and fired off two patch series that went to the wrong place. Oops. The problem was introduced recently when trying to add signatures from Fixes. The problem was that these email addresses were added too early in the process of compiling our list of places to send. Things added to the list earlier are considered more canonical and when we later added maintainer entries we ended up deduplicating to the old address. Here are two examples using mainline commits (to make it easier to replicate) for the two maintainers that I messed up recently: $ git format-patch d8549bcd0529~..d8549bcd0529 $ ./scripts/get_maintainer.pl 0001-clk-Add-clk_hw*.patch | grep Boyd Stephen Boyd <sboyd@codeaurora.org>... $ git format-patch 6d1238aa3395~..6d1238aa3395 $ ./scripts/get_maintainer.pl 0001-arm64-dts-qcom-qcs404*.patch | grep Andy Andy Gross <andy.gross@linaro.org> Let's move the adding of addresses from Fixes: to the end since the email addresses from these are much more likely to be older. After this patch the above examples get the right addresses for the two examples. Link: http://lkml.kernel.org/r/20200127095001.1.I41fba9f33590bfd92cd01960161d8384268c6569@changeid Fixes: 2f5bd343694e ("scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Joe Perches <joe@perches.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-21get_maintainer: remove uses of P: for maintainer nameJoe Perches1-24/+0
Commit 1ca84ed6425f ("MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile") changed the use of the "P:" tag from "Person" to "Profile (ie: special subsystem coding styles and characteristics)" Change how get_maintainer.pl parses the "P:" tag to match. Link: http://lkml.kernel.org/r/ca53823fc5d25c0be32ad937d0207a0589c08643.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Dan Williams <dan.j.william@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-10kbuild: fix mismatch between .version and include/generated/compile.hMasahiro Yamada1-1/+1
Since commit 56d589361572 ("kbuild: do not create orphan built-in.a or obj-y objects"), scripts/link-vmlinux.sh does nothing when descending into init/. Once the version number becomes out of sync between .version and include/generated/compile.h, it is not self-healing. [How to reproduce] $ echo 100 > .version $ make You will see the number in the .version is always bigger than that in compile.h by one. After this, every time you run 'make', the vmlinux is re-linked even when none of source files is updated. Fixes: 56d589361572 ("kbuild: do not create orphan built-in.a or obj-y objects") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-10scripts/kallsyms: fix memory corruption caused by write over-runMasahiro Yamada1-2/+2
memcpy() writes one more byte than allocated. Fixes: 8d60526999aa ("scripts/kallsyms: change table to store (strcut sym_entry *)") Reported-by: youling257 <youling257@gmail.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz>
2020-02-10Merge tag 'kbuild-v5.6-2' of ↵Linus Torvalds15-105/+119
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
2020-02-08Merge tag 'docs-5.6-2' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation fixes from Jonathan Corbet: "A handful of small documentation fixes that wandered in" * tag 'docs-5.6-2' of git://git.lwn.net/linux: Allow git builds of Sphinx Documentation: changes.rst: update several outdated project URLs Documentation: build warnings related to missing blank lines after explicit markups has been fixed mailmap: add entry for Tiezhu Yang Documentation/ko_KR/howto: Update a broken link Documentation/ko_KR/howto: Update broken web addresses docs/locking: Fix outdated section names
2020-02-05Allow git builds of SphinxStephen Kitt1-1/+1
When using a non-release version of Sphinx, from a local build (with improvements for kernel doc handling, why not), sphinx-build --version reports versions of the form sphinx-build 3.0.0+/4703d9119972 i.e. base version, a plus symbol, slash, and the start of the git hash of whatever repository the command is run in (no, not the hash that was used to build Sphinx!). This patch fixes the installation check in sphinx-pre-install to recognise such version output. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20200124183316.1719218-1-steve@sk2.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-02-05kconfig: Invalidate all symbols after changing to y or m.Tetsuo Handa1-3/+2
Since commit 89b9060987d9 ("kconfig: Add yes2modconfig and mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after changing to y or m, these targets did not save the changes. Call sym_clear_all_valid() so that all symbols are revalidated. Fixes: 89b9060987d9 ("kconfig: Add yes2modconfig and mod2yesconfig targets.") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04mm: remove __kreallocFlorian Westphal1-4/+0
Since 5.5-rc1 the last user of this function is gone, so remove the functionality. See commit 2ad9d7747c10 ("netfilter: conntrack: free extension area immediately") for details. Link: http://lkml.kernel.org/r/20191212223442.22141-1-fw@strlen.de Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Rientjes <rientjes@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03scripts/kallsyms: change table to store (strcut sym_entry *)Masahiro Yamada1-56/+65
The symbol table is extended every 10000 addition by using realloc(), where data copy might occur to the new buffer. To decrease the amount of possible data copy, let's change the table to store the pointer. The symbol type + symbol name part is appended at the end of (struct sym_entry), and allocated together with the struct body. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-03scripts/kallsyms: rename local variables in read_symbol()Masahiro Yamada1-12/+12
I will use 'sym' for the point to struce sym_entry in the next commit. Rename 'sym', 'stype' to 'name', 'type', which are more intuitive. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-03kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada13-39/+45
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-03kconfig: fix broken dependency in randconfig-generated .configMasahiro Yamada1-1/+1
Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency. This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated. When this happens, the has_changed flag should be set. Currently, it takes the result from the last iteration. It should accumulate all the results of the loop. Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-01Merge tag 'kconfig-v5.6' of ↵Linus Torvalds13-130/+170
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - add 'yes2modconfig' and 'mod2yesconfig' targets (useful mainly for turning syzbot configs into more modular ones as a step to minimizing the result) - sanitize help text - various code cleanups * tag 'kconfig-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: fix documentation typos kconfig: fix an "implicit declaration of function" warning kconfig: fix nesting of symbol help text kconfig: distinguish between dependencies and visibility in help text kconfig: list all definitions of a symbol in help text kconfig: Add yes2modconfig and mod2yesconfig targets. kconfig: use $(PERL) in Makefile kconfig: fix too deep indentation in Makefile kconfig: localmodconfig: fix indentation for closing brace kconfig: localmodconfig: remove unused $config kconfig: squash prop_alloc() into menu_add_prop() kconfig: remove sym from struct property kconfig: remove 'prompt' argument from menu_add_prop() kconfig: move prompt handling to menu_add_prompt() from menu_add_prop() kconfig: remove 'prompt' symbol kconfig: drop T_WORD from the RHS of 'prompt' symbol kconfig: use parent->dep as the parentdep of 'menu' kconfig: remove the rootmenu check in menu_add_prop()
2020-02-01Merge tag 'kbuild-v5.6' of ↵Linus Torvalds10-175/+98
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - detect missing include guard in UAPI headers - do not create orphan built-in.a or obj-y objects - generate modules.builtin more simply, and drop tristate.conf - simplify built-in initramfs creation - make linux-headers deb package thinner - optimize the deb package build script - misc cleanups * tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) builddeb: split libc headers deployment out into a function builddeb: split kernel headers deployment out into a function builddeb: remove redundant make for ARCH=um builddeb: avoid invoking sub-shells where possible builddeb: remove redundant $objtree/ builddeb: match temporary directory name to the package name builddeb: remove unneeded files in hdrobjfiles for headers package kbuild: use -S instead of -E for precise cc-option test in Kconfig builddeb: allow selection of .deb compressor kbuild: remove 'Building modules, stage 2.' log kbuild: remove *.tmp file when filechk fails kbuild: remove PYTHON2 variable modpost: assume STT_SPARC_REGISTER is defined gen_initramfs.sh: remove intermediate cpio_list on errors initramfs: refactor the initramfs build rules gen_initramfs.sh: always output cpio even without -o option initramfs: add default_cpio_list, and delete -d option support initramfs: generate dependency list and cpio at the same time initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile initramfs: make initramfs compression choice non-optional ...
2020-01-31Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-0/+14
Pull updates from Andrew Morton: "Most of -mm and quite a number of other subsystems: hotfixes, scripts, ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov. MM is fairly quiet this time. Holidays, I assume" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) kcov: ignore fault-inject and stacktrace include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc() execve: warn if process starts with executable stack reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() init/main.c: fix misleading "This architecture does not have kernel memory protection" message init/main.c: fix quoted value handling in unknown_bootoption init/main.c: remove unnecessary repair_env_string in do_initcall_level init/main.c: log arguments and environment passed to init fs/binfmt_elf.c: coredump: allow process with empty address space to coredump fs/binfmt_elf.c: coredump: delete duplicated overflow check fs/binfmt_elf.c: coredump: allocate core ELF header on stack fs/binfmt_elf.c: make BAD_ADDR() unlikely fs/binfmt_elf.c: better codegen around current->mm fs/binfmt_elf.c: don't copy ELF header around fs/binfmt_elf.c: fix ->start_code calculation fs/binfmt_elf.c: smaller code generation around auxv vector fill lib/find_bit.c: uninline helper _find_next_bit() lib/find_bit.c: join _find_next_bit{_le} uapi: rename ext2_swab() to swab() and share globally in swab.h lib/scatterlist.c: adjust indentation in __sg_alloc_table ...
2020-01-31scripts/spelling.txt: add "issus" typoLuca Ceresoli1-0/+1
Add "issus" and correct it as "issues". Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.net Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31scripts/spelling.txt: add more spellings to spelling.txtXiong1-0/+13
Here are some of the common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel. Most of them still exist in more than two source files. Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com Signed-off-by: Xiong <xndchn@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30Merge tag 'devicetree-for-5.6' of ↵Linus Torvalds13-32/+63
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Update dtc to upstream v1.5.1-22-gc40aeb60b47a (plus 1 revert) - Fix for DMA coherent devices on Power - Rework and simplify the DT phandle cache code - DT schema conversions for LEDS, gpio-leds, STM32 dfsdm, STM32 UART, STM32 ROMEM, STM32 watchdog, STM32 DMAs, STM32 mlahb, STM32 RTC, STM32 RCC, STM32 syscon, rs485, Renesas rCar CSI2, Faraday FTIDE010, DWC2, Arm idle-states, Allwinner legacy resets, PRCM and clocks, Allwinner H6 OPP, Allwinner AHCI, Allwinner MBUS, Allwinner A31 CSI, Allwinner h/w codec, Allwinner A10 system ctrl, Allwinner SRAM, Allwinner USB PHY, Renesas CEU, generic PCI host, Arm Versatile PCI - New binding schemas for SATA and PATA controllers, TI and Infineon VR controllers, MAX31730 - New compatible strings for i.MX8QM, WCN3991, renesas,r8a77961-wdt, renesas,etheravb-r8a77961 - Add USB 'super-speed-plus' as a documented speed - Vendor prefixes for broadmobi, calaosystems, kam, and mps - Clean-up the multiple flavors of ST-Ericsson vendor prefixes * tag 'devicetree-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties with phandles" of: Add OF_DMA_DEFAULT_COHERENT & select it on powerpc dt-bindings: leds: Convert gpio-leds to DT schema dt-bindings: leds: Convert common LED binding to schema dt-bindings: PCI: Convert generic host binding to DT schema dt-bindings: PCI: Convert Arm Versatile binding to DT schema dt-bindings: Be explicit about installing deps dt-bindings: stm32: convert dfsdm to json-schema dt-bindings: serial: Convert STM32 UART to json-schema dt-bindings: serial: Convert rs485 bindings to json-schema dt-bindings: timer: Use non-empty ranges in example dt-bindings: arm-boards: typo fix dt-bindings: Add TI and Infineon VR Controllers as trivial devices dt-binding: usb: add "super-speed-plus" dt-bindings: rcar-csi2: Convert bindings to json-schema dt-bindings: iio: adc: ad7606: Fix wrong maxItems value dt-bindings: Convert Faraday FTIDE010 to DT schema dt-bindings: Create DT bindings for PATA controllers dt-bindings: Create DT bindings for SATA controllers dt: bindings: add vendor prefix for Kamstrup A/S ...
2020-01-30Merge tag 'docs-5.6' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle for documentation, but there's still a couple of things of note: - Conversion of the NFS documentation to RST - A new document on how to help with documentation (and a maintainer profile entry too) Plus the usual collection of typo fixes, etc" * tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits) docs: filesystems: add overlayfs to index.rst docs: usb: remove some broken references scripts/find-unused-docs: Fix massive false positives docs: nvdimm: use ReST notation for subsection zram: correct documentation about sysfs node of huge page writeback Documentation: zram: various fixes in zram.rst Add a maintainer entry profile for documentation Add a document on how to contribute to the documentation docs: Keep up with the location of NoUri Documentation: Call out example SYM_FUNC_* usage as x86-specific Documentation: nfs: fault_injection: convert to ReST Documentation: nfs: pnfs-scsi-server: convert to ReST Documentation: nfs: convert pnfs-block-server to ReST Documentation: nfs: idmapper: convert to ReST Documentation: convert nfsd-admin-interfaces to ReST Documentation: nfs-rdma: convert to ReST Documentation: nfsroot.rst: COSMETIC: refill a paragraph Documentation: nfsroot.txt: convert to ReST Documentation: convert nfs.txt to ReST Documentation: filesystems: convert vfat.txt to RST ...
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds3-294/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2020-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-4/+2
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-28builddeb: split libc headers deployment out into a functionMasahiro Yamada1-14/+18
Deploy user-space headers (linux-libc-dev package) in a separate function for readability. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: split kernel headers deployment out into a functionMasahiro Yamada1-34/+42
Deploy kernel headers (linux-headers package) in a separate function for readability. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: remove redundant make for ARCH=umMasahiro Yamada1-2/+1
The kernel build has already been done before builddeb is invoked. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: avoid invoking sub-shells where possibleMasahiro Yamada1-13/+22
The commands surrounded by ( ... ) is run in a sub-shell, but you do not have to spawn a sub-shell for every single line. Use just one ( ... ) for creating debian/hdrsrcfiles. For tar, use -C option instead. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: remove redundant $objtree/Masahiro Yamada1-16/+16
This script works only when it is invoked in the $objtree, that is, it is already relying on $objtree is '.' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: match temporary directory name to the package nameMasahiro Yamada1-4/+4
The temporary directory names, debian/hdrtmp (linux-headers package) vs debian/headertmp (linux-libc-dev package), are confusing. Matching the directory name to the package name is clearer, IMHO. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28builddeb: remove unneeded files in hdrobjfiles for headers packageMasahiro Yamada1-2/+2
- We do not need tools/objtool/fixdep or tools/objtool/sync-check.sh for building external modules. Including tools/objtool/objtool is enough. - gcc-common.h is a check-in file. I do not see any point to search for it in objtree. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-28Merge branch 'core-objtool-for-linus' of ↵Linus Torvalds6-381/+541
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "The main changes are to move the ORC unwind table sorting from early init to build-time - this speeds up booting. No change in functionality intended" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix !CONFIG_MODULES build warning x86/unwind/orc: Remove boot-time ORC unwind tables sorting scripts/sorttable: Implement build-time ORC unwind table sorting scripts/sorttable: Rename 'sortextable' to 'sorttable' scripts/sortextable: Refactor the do_func() function scripts/sortextable: Remove dead code scripts/sortextable: Clean up the code to meet the kernel coding style better scripts/sortextable: Rewrite error/success handling
2020-01-28scripts/dtc: Revert "yamltree: Ensure consistent bracketing of properties ↵Rob Herring1-21/+0
with phandles" This reverts upstream commit 18d7b2f4ee45fec422b7d82bab0b3c762ee907e4. A revert in upstream dtc is pending. This commit didn't work for properties such as 'interrupt-map' that have phandle in the middle of an entry. It would also not work for a 0 or -1 phandle value that acts as a NULL. Signed-off-by: Rob Herring <robh@kernel.org>
2020-01-28scripts/find-unused-docs: Fix massive false positivesGeert Uytterhoeven1-1/+1
scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a source file contains kerneldoc or not. However, as it passes the no longer supported "-text" option to scripts/kernel-doc, the latter prints out its help text, causing all files to be considered containing kerneldoc. Get rid of these false positives by removing the no longer supported "-text" option from the scripts/kernel-doc invocation. Cc: stable@vger.kernel.org # 4.16+ Fixes: b05142675310d2ac ("scripts: kernel-doc: get rid of unused output formats") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-01-28Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2-5/+1
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27Merge tag 'arm64-upstream' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The changes are a real mixed bag this time around. The only scary looking one from the diffstat is the uapi change to asm-generic/mman-common.h, but this has been acked by Arnd and is actually just adding a pair of comments in an attempt to prevent allocation of some PROT values which tend to get used for arch-specific purposes. We'll be using them for Branch Target Identification (a CFI-like hardening feature), which is currently under review on the mailing list. New architecture features: - Support for Armv8.5 E0PD, which benefits KASLR in the same way as KPTI but without the overhead. This allows KPTI to be disabled on CPUs that are not affected by Meltdown, even is KASLR is enabled. - Initial support for the Armv8.5 RNG instructions, which claim to provide access to a high bandwidth, cryptographically secure hardware random number generator. As well as exposing these to userspace, we also use them as part of the KASLR seed and to seed the crng once all CPUs have come online. - Advertise a bunch of new instructions to userspace, including support for Data Gathering Hint, Matrix Multiply and 16-bit floating point. Kexec: - Cleanups in preparation for relocating with the MMU enabled - Support for loading crash dump kernels with kexec_file_load() Perf and PMU drivers: - Cleanups and non-critical fixes for a couple of system PMU drivers FPU-less (aka broken) CPU support: - Considerable fixes to support CPUs without the FP/SIMD extensions, including their presence in heterogeneous systems. Good luck finding a 64-bit userspace that handles this. Modern assembly function annotations: - Start migrating our use of ENTRY() and ENDPROC() over to the new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended to aid debuggers Kbuild: - Cleanup detection of LSE support in the assembler by introducing 'as-instr' - Remove compressed Image files when building clean targets IP checksumming: - Implement optimised IPv4 checksumming routine when hardware offload is not in use. An IPv6 version is in the works, pending testing. Hardware errata: - Work around Cortex-A55 erratum #1530923 Shadow call stack: - Work around some issues with Clang's integrated assembler not liking our perfectly reasonable assembly code - Avoid allocating the X18 register, so that it can be used to hold the shadow call stack pointer in future ACPI: - Fix ID count checking in IORT code. This may regress broken firmware that happened to work with the old implementation, in which case we'll have to revert it and try something else - Fix DAIF corruption on return from GHES handler with pseudo-NMIs Miscellaneous: - Whitelist some CPUs that are unaffected by Spectre-v2 - Reduce frequency of ASID rollover when KPTI is compiled in but inactive - Reserve a couple of arch-specific PROT flags that are already used by Sparc and PowerPC and are planned for later use with BTI on arm64 - Preparatory cleanup of our entry assembly code in preparation for moving more of it into C later on - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits) arm64: acpi: fix DAIF manipulation with pNMI arm64: kconfig: Fix alignment of E0PD help text arm64: Use v8.5-RNG entropy for KASLR seed arm64: Implement archrandom.h for ARMv8.5-RNG arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean' arm64: entry: Avoid empty alternatives entries arm64: Kconfig: select HAVE_FUTEX_CMPXCHG arm64: csum: Fix pathological zero-length calls arm64: entry: cleanup sp_el0 manipulation arm64: entry: cleanup el0 svc handler naming arm64: entry: mark all entry code as notrace arm64: assembler: remove smp_dmb macro arm64: assembler: remove inherit_daif macro ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map() mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use arm64: Use macros instead of hard-coded constants for MAIR_EL1 arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list arm64: kernel: avoid x18 in __cpu_soft_restart arm64: kvm: stop treating register x18 as caller save arm64/lib: copy_page: avoid x18 register in assembler code ...
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+17
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+17
Pull ARM fixes from Russell King: - fix ftrace relocation type filtering - relax arch timer version check * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8955/1: virt: Relax arch timer version check during early boot ARM: 8950/1: ftrace/recordmcount: filter relocation types
2020-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller2-4/+2
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22bpf, btf: Always output invariant hit in pahole DWARF to BTF transformChris Down1-2/+2
When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this error: % make -s Failed to generate BTF for vmlinux Try to disable CONFIG_DEBUG_INFO_BTF make[3]: *** [vmlinux] Error 1 Compiling again without -s shows the true error (that pahole is missing), but since this is fatal, we should show the error unconditionally on stderr as well, not silence it using the `info` function. With this patch: % make -s BTF: .tmp_vmlinux.btf: pahole (pahole) is not available Failed to generate BTF for vmlinux Try to disable CONFIG_DEBUG_INFO_BTF make[3]: *** [vmlinux] Error 1 Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name
2020-01-22kbuild: use -S instead of -E for precise cc-option test in KconfigMasahiro Yamada1-1/+1
Currently, -E (stop after the preprocessing stage) is used to check whether the given compiler flag is supported. While it is faster than -S (or -c), it can be false-positive. You need to run the compilation proper to check the flag more precisely. For example, -E and -S disagree about the support of "--param asan-instrument-allocas=1". $ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null $ echo $? 0 $ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’? $ echo $? 1 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-21builddeb: allow selection of .deb compressorMichał Mirosław1-1/+1
Select deb compression using KDEB_COMPRESS make variable. This allows to use gzip compression for local or test builds, and that's way faster than now-default xz compression. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-19ARM: 8950/1: ftrace/recordmcount: filter relocation typesAlex Sverdlin1-0/+17
Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-01-15kbuild: remove 'Building modules, stage 2.' logMasahiro Yamada1-1/+0
This log is displayed every time modules are built, but it is not so important. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-15kbuild: remove *.tmp file when filechk failsMasahiro Yamada1-8/+7
Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails due to missing packages, a temporary file is left over, which is not ignored by git. For example, if GTK+ is not installed: $ make gconfig * * Unable to find the GTK+ installation. Please make sure that * the GTK+ 2.0 development package is correctly installed. * You need gtk+-2.0 gmodule-2.0 libglade-2.0 * scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed make[1]: *** [scripts/kconfig/gconf-cfg] Error 1 Makefile:567: recipe for target 'gconfig' failed make: *** [gconfig] Error 2 $ git status HEAD detached at v5.4 Untracked files: (use "git add <file>..." to include in what will be committed) scripts/kconfig/gconf-cfg.tmp nothing added to commit but untracked files present (use "git add" to track) This is because the check scripts are run with filechk, which misses to clean up the temporary file on failure. When the line { $(filechk_$(1)); } > $@.tmp; ... fails, it exits immediately due to the 'set -e'. Use trap to make sure to delete the temporary file on exit. For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it a hidden file. Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-15modpost: assume STT_SPARC_REGISTER is definedMasahiro Yamada1-7/+1
Commit 8d5290149ee1 ("[SPARC]: Deal with glibc changing macro names in modpost.c") was more than 14 years ago. STT_SPARC_REGISTER is hopefully defined in elf.h of recent C libraries. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
2020-01-15kbuild: Add support for 'as-instr' to be used in Kconfig filesCatalin Marinas1-0/+4
Similar to 'cc-option' or 'ld-option', it is occasionally necessary to check whether the assembler supports certain ISA extensions. In the arm64 code we currently do this in Makefile with an additional define: lseinstr := $(call as-instr,.arch_extension lse,-DCONFIG_AS_LSE=1) Add the 'as-instr' option so that it can be used in Kconfig directly: def_bool $(as-instr,.arch_extension lse) Acked-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-14libbpf: Clean up bpf_helper_defs.h generation outputAndrii Nakryiko1-2/+0
bpf_helpers_doc.py script, used to generate bpf_helper_defs.h, unconditionally emits one informational message to stderr. Remove it and preserve stderr to contain only relevant errors. Also make sure script invocations command is muted by default in libbpf's Makefile. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200113073143.1779940-3-andriin@fb.com
2020-01-14builddeb: make headers package thinnerMichał Mirosław1-2/+2
Remove a bunch of files not used during external module builds: - foreign architecture headers - subtree Makefiles - Kconfig files - perl scripts On amd64 system this looses a third of the resulting .deb size. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-13Merge 5.5-rc6 into tty-nextGreg Kroah-Hartman2-6/+5
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>