| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel since September 2020
Link: https://lkml.kernel.org/r/20210210124318.55082-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Increase "allocted" and "exeeds" spelling error check.
Link: https://lkml.kernel.org/r/20210127081919.1928-1-dingsenjie@163.com
Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Increase exeeds spelling error check.
Link: https://lkml.kernel.org/r/20210127060049.915-1-zuoqilin1@163.com
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Increase maping spelling error check.
Link: https://lkml.kernel.org/r/20210121092125.2663-1-tangchunyou@163.com
Signed-off-by: WenZhang <zhangwen@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more clang LTO updates from Kees Cook:
"Clang LTO x86 enablement.
Full disclosure: while this has _not_ been in linux-next (since it
initially looked like the objtool dependencies weren't going to make
v5.12), it has been under daily build and runtime testing by Sami for
quite some time. These x86 portions have been discussed on lkml, with
Peter, Josh, and others helping nail things down.
The bulk of the changes are to get objtool working happily. The rest
of the x86 enablement is very small.
Summary:
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)"
Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/
* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: force rebuilds when switching CONFIG_LTO
x86, build: allow LTO to be selected
x86, cpu: disable LTO for cpu.c
x86, vdso: disable LTO only for vDSO
kbuild: lto: postpone objtool
objtool: Split noinstr validation from --vmlinux
x86, build: use objtool mcount
tracing: add support for objtool mcount
objtool: Don't autodetect vmlinux.o
objtool: Fix __mcount_loc generation with Clang's assembler
objtool: Add a pass for generating __mcount_loc
|
|
Commit 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool") enabled
building fdtoverlay, but failed to add it to .gitignore.
Also add a note to keep hostprogs in sync with .gitignore.
Fixes: 0da6bcd9fcc0 ("scripts: dtc: Build fdtoverlay tool")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
With LTO, LLVM bitcode won't be compiled into native code until
modpost_link, or modfinal for modules. This change postpones calls
to objtool until after these steps, and moves objtool_args to
Makefile.lib, so the arguments can be reused in Makefile.modfinal.
As we didn't have objects to process earlier, we use --duplicate
when processing vmlinux.o. This change also disables unreachable
instruction warnings with LTO to avoid warnings about the int3
padding between functions.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
This change adds a --noinstr flag to objtool to allow us to specify
that we're processing vmlinux.o without also enabling noinstr
validation. This is needed to avoid false positives with LTO when we
run objtool on vmlinux.o without CONFIG_DEBUG_ENTRY.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
This change adds build support for using objtool to generate
__mcount_loc sections.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
With LTO, we run objtool on vmlinux.o, but don't want noinstr
validation. This change requires --vmlinux to be passed to objtool
explicitly.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit dc5723b02e52
("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
build:
make LLVM=1 LLVM_IAS=1 defconfig
scripts/config -e LTO_CLANG_THIN
make LLVM=1 LLVM_IAS=1
(To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
and "ARCH=arm64" to the "make" command lines.)
Summary:
- Clang LTO build infrastructure and arm64-specific enablement (Sami
Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"
* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
arm64: allow LTO to be selected
arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
arm64: vdso: disable LTO
drivers/misc/lkdtm: disable LTO for rodata.o
efi/libstub: disable LTO
scripts/mod: disable LTO for empty.c
modpost: lto: strip .lto from module names
PCI: Fix PREL32 relocations for LTO
init: lto: fix PREL32 relocations
init: lto: ensure initcall ordering
kbuild: lto: add a default list of used symbols
kbuild: lto: merge module sections
kbuild: lto: limit inlining
kbuild: lto: fix module versioning
kbuild: add support for Clang LTO
tracing: move function tracer options to Kconfig
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Core locking primitives updates:
- Remove mutex_trylock_recursive() from the API - no users left
- Simplify + constify the futex code a bit
Lockdep updates:
- Teach lockdep about local_lock_t
- Add CONFIG_DEBUG_IRQFLAGS=y debug config option to check for
potentially unsafe IRQ mask restoration patterns. (I.e.
calling raw_local_irq_restore() with IRQs enabled.)
- Add wait context self-tests
- Fix graph lock corner case corrupting internal data structures
- Fix noinstr annotations
LKMM updates:
- Simplify the litmus tests
- Documentation fixes
KCSAN updates:
- Re-enable KCSAN instrumentation in lib/random32.c
Misc fixes:
- Don't branch-trace static label APIs
- DocBook fix
- Remove stale leftover empty file"
* tag 'locking-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
checkpatch: Don't check for mutex_trylock_recursive()
locking/mutex: Kill mutex_trylock_recursive()
s390: Use arch_local_irq_{save,restore}() in early boot code
lockdep: Noinstr annotate warn_bogus_irq_restore()
locking/lockdep: Avoid unmatched unlock
locking/rwsem: Remove empty rwsem.h
locking/rtmutex: Add missing kernel-doc markup
futex: Remove unneeded gotos
futex: Change utime parameter to be 'const ... *'
lockdep: report broken irq restoration
jump_label: Do not profile branch annotations
locking: Add Reviewers
locking/selftests: Add local_lock inversion tests
locking/lockdep: Exclude local_lock_t from IRQ inversions
locking/lockdep: Clean up check_redundant() a bit
locking/lockdep: Add a skip() function to __bfs()
locking/lockdep: Mark local_lock_t
locking/selftests: More granular debug_locks_verbose
lockdep/selftest: Add wait context selftests
tools/memory-model: Fix typo in klitmus7 compatibility table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
* tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts: set proper OpenSSL include dir also for sign-file
sparc: remove wrong comment from arch/sparc/include/asm/Kbuild
kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
|
|
Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto")
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o
sh4-linux-objcopy: Unable to change endianness of input file(s)
sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
of_dev_get() and of_dev_put are just wrappers for get_device()/put_device()
on a platform_device. There's also already platform_device_{get,put}()
wrappers for this purpose. Let's update the few users and remove
of_dev_{get,put}().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Gilles Muller <Gilles.Muller@inria.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-usb@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-2-robh@kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Stephen Rothwell reported a build error on ppc64 when
CONFIG_TRIM_UNUSED_KSYMS is enabled.
Jessica Yu pointed out the cause of the error with the reference to the
ppc64 ELF ABI:
"Symbol names with a dot (.) prefix are reserved for holding entry
point addresses. The value of a symbol named ".FN", if it exists,
is the entry point of the function "FN".
As it turned out, CONFIG_TRIM_UNUSED_KSYMS has never worked for ppc64,
but this issue has been unnoticed until recently because this option
depends on !UNUSED_SYMBOLS hence is disabled by all{mod,yes}config.
(Then, it was uncovered by another patch removing UNUSED_SYMBOLS.)
Removing the dot prefix in scripts/gen_autoksyms.sh fixes the issue.
Please note it must be done before 'sort -u' because modules have
both ._mcount and _mcount undefined when CONFIG_FUNCTION_TRACER=y.
Link: https://lore.kernel.org/lkml/20210209210843.3af66662@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
|
|
mutex_trylock_recursive() has been removed from the tree, there is no
need to check for it.
Remove traces of mutex_trylock_recursive()'s existence.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210210085248.219210-3-bigeasy@linutronix.de
|
|
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
As far as I can tell this has never been used at all, and certainly
not any time recently.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
ARM randconfig builds with lld sometimes show a build failure
from kallsyms:
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
The problem is the veneers/thunks getting added by the linker extend
the symbol table, which in turn leads to more veneers being needed,
so it may take a few extra iterations to converge.
This bug has been fixed multiple times before, but comes back every time
a new symbol name is used. lld uses a different set of identifiers from
ld.bfd, so the additional ones need to be added as well.
I looked through the sources and found that arm64 and mips define similar
prefixes, so I'm adding those as well, aside from the ones I observed. I'm
not sure about powerpc64, which seems to already be handled through a
section match, but if it comes back, the "__long_branch_" and "__plt_"
prefixes would have to get added as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
|
|
This was copied from external DTC repository long back and isn't used
anymore. Over that the dtc tool can be used to generate the dts source
back from the dtb. Remove the unused fdtdump.c file.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7ea1a9e7fd5d75b7adfc2a4c40dde2d4ea3fddf8.1611904394.git.viresh.kumar@linaro.org
|
|
We will start building overlays for platforms soon in the kernel and
would need fdtoverlay going forward. Lets start building it.
The fdtoverlay program applies one or more overlay dtb blobs to a base
dtb blob. The kernel build system would later use fdtoverlay to generate
the overlaid blobs based on platform specific configurations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/4a201dea3ba11a00cab7e936dfc1140dac1a1ae3.1611904394.git.viresh.kumar@linaro.org
|
|
This adds the following commits from upstream:
183df9e9c2b9 gitignore: Ignore the swp files
0db6d09584e1 gitignore: Add cscope files
307afa1a7be8 Update Jon Loeliger's email
ca16a723fa9d fdtdump: Fix gcc11 warning
64990a272e8f srcpos: increase MAX_SRCFILE_DEPTH
163f0469bf2e dtc: Allow overlays to have .dtbo extension
3b01518e688d Set last_comp_version correctly in new dtb and fix potential version issues in fdt_open_into
f7e5737f26aa tests: Fix overlay_overlay_nosugar test case
7cd5d5fe43d5 libfdt: Tweak description of assume-aligned load helpers
a7c404099349 libfdt: Internally perform potentially unaligned loads
bab85e48a6f4 meson: increase default timeout for tests
f8b46098824d meson: do not assume python is installed, skip tests
30a56bce4f0b meson: fix -Wall warning
5e735860c478 libfdt: Check for 8-byte address alignment in fdt_ro_probe_()
67849a327927 build-sys: add meson build
05874d08212d pylibfdt: allow build out of tree
3bc3a6b9fe0c dtc: Fix signedness comparisons warnings: Wrap (-1)
e1147b159e92 dtc: Fix signedness comparisons warnings: change types
04cf1fdc0fcf convert-dtsv0: Fix signedness comparisons warning
b30013edb878 libfdt: Fix kernel-doc comments
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
We will start building overlays for platforms soon in the kernel and
would need fdtoverlay tool going forward. Lets start fetching it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/28f66f70602225bb6aeb58e924c20bde9d864327.1611904394.git.viresh.kumar@linaro.org
|
|
For the same reason as commit 51839e29cb59 ("scripts: switch explicitly
to Python 3"), switch some more scripts, which I tested and confirmed
working on Python 3.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
|
|
The kernel build system as a whole is dropping support for Python 2, so we
should do the same. The effects are rather small, especially considering
that much of the deleted code was not doing anything under any version of
Python anyway.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Python retired in 2020, and some distributions do not provide the
'python' command any more.
As in commit 51839e29cb59 ("scripts: switch explicitly to Python 3"),
we need to use more specific 'python3' to invoke scripts even if they
are written in a way compatible with both Python 2 and 3.
This commit removes the variable 'PYTHON', and switches the existing
users to 'PYTHON3'.
BTW, PEP 394 (https://www.python.org/dev/peps/pep-0394/) is a helpful
material.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
While DOC: section titles are not converted into RST headings
sections and are only decorated with strong emphasis markup,
nothing stops us from generating internal hyperlinks for them,
to mimic implicit hyperlinks to RST headings.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20210118110813.1490-1-michal.wajdeczko@intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This reverts commit 327953e9af6c59ad111b28359e59e3ec0cbd71b6.
You cannot use 'boolean' since commit b92d804a5179 ("kconfig: drop
'boolean' keyword").
This check is no longer needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Joe Perches <joe@perches.com>
|
|
Otherwise build fails if the headers are not in the default location. While at
it also ask pkg-config for the libs, with fallback to the existing value.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org # 5.6.x
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit c0f975af1745 ("kconfig: Support building mconf with vendor
sysroot ncurses") introduces a bug when HOSTCC contains parameters:
the whole command line is treated as the program name (with spaces
in it). Therefore, we have to remove the quotes.
Fixes: c0f975af1745 ("kconfig: Support building mconf with vendor sysroot ncurses")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
With commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev
capability test") applied, this hunk can be way simplified because
now scripts/gcc-plugins/Kconfig only checks plugin-version.h
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Some distributions are about to switch to Python 3 support only.
This means that /usr/bin/python, which is Python 2, is not available
anymore. Hence, switch scripts to use Python 3 explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Kernel-doc currently expects that the kernel-doc markup to come
just before the function/enum/struct/union/typedef prototype.
Yet, if it find things like:
/**
* refcount_add - add a value to a refcount
* @i: the value to add to the refcount
* @r: the refcount
*/
static inline void __refcount_add(int i, refcount_t *r, int *oldp);
static inline void refcount_add(int i, refcount_t *r);
Kernel-doc will do the wrong thing:
foobar.h:6: warning: Function parameter or member 'oldp' not described in '__refcount_add'
.. c:function:: void __refcount_add (int i, refcount_t *r, int *oldp)
add a value to a refcount
**Parameters**
``int i``
the value to add to the refcount
``refcount_t *r``
the refcount
``int *oldp``
*undescribed*
Basically, it will document "__refcount_add" with the kernel-doc
markup for refcount_add.
If both functions have the same arguments, this won't even
produce any warning!
Add a logic to check if the kernel-doc identifier matches the actual
name of the C function or data structure that will be documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/081546f141a496d6cabb99a4adc140444c705e93.1610610937.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With CONFIG_LTO_CLANG, clang generates LLVM IR instead of ELF object
files. As empty.o is used for probing target properties, disable LTO
for it to produce an object file instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-12-samitolvanen@google.com
|
|
With LTO, everything is compiled into LLVM bitcode, so we have to link
each module into native code before modpost. Kbuild uses the .lto.o
suffix for these files, which also ends up in module information. This
change strips the unnecessary .lto suffix from the module name.
Suggested-by: Bill Wendling <morbo@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-11-samitolvanen@google.com
|
|
With LTO, the compiler doesn't necessarily obey the link order for
initcalls, and initcall variables need globally unique names to avoid
collisions at link time.
This change exports __KBUILD_MODNAME and adds the initcall_id() macro,
which uses it together with __COUNTER__ and __LINE__ to help ensure
these variables have unique names, and moves each variable to its own
section when LTO is enabled, so the correct order can be specified using
a linker script.
The generate_initcall_ordering.pl script uses nm to find initcalls from
the object files passed to the linker, and generates a linker script
that specifies the same order for initcalls that we would have without
LTO. With LTO enabled, the script is called in link-vmlinux.sh through
jobserver-exec to limit the number of jobs spawned.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-8-samitolvanen@google.com
|
|
With CONFIG_LTO_CLANG, LLVM bitcode has not yet been compiled into a
binary when the .mod files are generated, which means they don't yet
contain references to certain symbols that will be present in the final
binaries. This includes intrinsic functions, such as memcpy, memmove,
and memset [1], and stack protector symbols [2]. This change adds a
default symbol list to use with CONFIG_TRIM_UNUSED_KSYMS when Clang's
LTO is used.
[1] https://llvm.org/docs/LangRef.html#standard-c-c-library-intrinsics
[2] https://llvm.org/docs/LangRef.html#llvm-stackprotector-intrinsic
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-7-samitolvanen@google.com
|
|
LLD always splits sections with LTO, which increases module sizes. This
change adds linker script rules to merge the split sections in the final
module.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-6-samitolvanen@google.com
|
|
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
|
|
This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:
https://llvm.org/docs/LinkTimeOptimization.html
The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:
- compiling with Clang,
- compiling all assembly code with Clang's integrated assembler,
- and linking with LLD.
While using CONFIG_LTO_CLANG_FULL results in the best runtime
performance, the compilation is not scalable in time or
memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows
parallel optimization and faster incremental builds. ThinLTO is
used by default if the architecture also selects
ARCH_SUPPORTS_LTO_CLANG_THIN:
https://clang.llvm.org/docs/ThinLTO.html
To enable LTO, LLVM tools must be used to handle bitcode files, by
passing LLVM=1 and LLVM_IAS=1 options to make:
$ make LLVM=1 LLVM_IAS=1 defconfig
$ scripts/config -e LTO_CLANG_THIN
$ make LLVM=1 LLVM_IAS=1
To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Search for <ncurses.h> in the default header path of HOSTCC
- Tweak the option order to be kind to old BSD awk
- Remove 'kvmconfig' and 'xenconfig' shorthands
- Fix documentation
* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: kbuild: Fix section reference
kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
lib/raid6: Let $(UNROLL) rules work with macOS userland
kconfig: Support building mconf with vendor sysroot ncurses
kconfig: config script: add a little user help
MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal
|
|
Move function tracer options to Kconfig to make it easier to add
new methods for generating __mcount_loc, and to make the options
available also when building kernel modules.
Note that FTRACE_MCOUNT_USE_* options are updated on rebuild and
therefore, work even if the .config was generated in a different
environment.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-2-samitolvanen@google.com
|
